hello.
i try to download the orange 2.3.4 sbf file but the links are broken.
my atrix have a soft brick and i need to flash the stock version of orange 2.3.4 can some1 help me with this?
sasha2k said:
hello.
i try to download the orange 2.3.4 sbf file but the links are broken.
my atrix have a soft brick and i need to flash the stock version of orange 2.3.4 can some1 help me with this?
Click to expand...
Click to collapse
If your soft bricked then you should follow this guide: [How To] Recover from a soft brick
i will check it now.
how can i be sure that this is a soft brick? the phone seems to me like in the past and not crashing...
how can i be sure that there is a problem? (i post here because a friend of my told me this is a very good furom)
my atrix information:
system version: 45.33.0.MB860 partner.en.il
model number:MB860
android version:2.3.4
baseband version:N_01.100.00R
Webtop version:WT-1.2.0-133_44
Kernal version:2.6.32.9
[email protected]h68Inxdroid46#2
APflex version:GAS_ASIA_USAOLYGBISPT_P003
GAS_ASIA_USAOLYGBISPT_A003
GAS_ASIA_USAOLYGBISPT_M001
Build number:4.5.2A-74_OLE-33
try to bootloader it yesterday and i got fail what is the reason ??
some one please
sasha2k said:
some one please
Click to expand...
Click to collapse
i have sbf for orange il
can you upload it here please?
sasha2k said:
can you upload it here please?
Click to expand...
Click to collapse
now i uploading it take about 7 hours
are you from israel ??
ok thank you!
no,i am from L.A
my friend send me this phone from israel
update:
i just unlocked my phone.
what is the next step?
sasha2k said:
update:
i just unlocked my phone.
what is the next step?
Click to expand...
Click to collapse
1. Root the phone
2. Install latest cwm recovery
3. Install custom rom
i rotted the phone
the recovery is it makes diffrence which recovery i am using?
which rom should i use to get the best from this phone (performance,battery,good looking )?
this is clockworkmod recovery: http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.1.8-olympus.img
download that and flash it to your phone with fastboot.
google how to fastboot on atrix its very easy.
then you can enter recovery by holding volume down whilst turning on the device, then keep pressing down until it says android recovery, then press volume up, from there you can mount your phone as usb storage, copy over a rom like cm9 or cm7 and install that, if you want stock i can upload the boot and system imgs for orange UK 2.3.4 sbf but would take a while
edit: if your willing to try a custom rom, cm9 is the latest and greatest android 4.0.4, but a couple small things like video camera and browser rotation are broken, cm7 is android 2.3.7 and has pretty much everything working perfectly.
how i flashing the cm9 version.
there is 3 rar files
what i need to do with them?
sasha2k said:
how i flashing the cm9 version.
there is 3 rar files
what i need to do with them?
Click to expand...
Click to collapse
2 zips:
cm9: http://coblitz.codeen.org/turl.andr...cm-9.0.0-RC0-olympus-UNOFFICIAL-signed-11.zip
gapps: http://goo.im/gapps/gapps-ics-20120422-signed.zip
in recovery, wipe data/factory reset, flash cm9 then gapps, your better off searching all this stuff as youll probably find in depth instructions
thanks alot!!
everything is ok!
all working fine except the browser that crashes sometimes.
where can i find some cool widgets or some nice stuff for android 4?
Related
I have an LG Optimus One running 2.2.2 latest firmware V10e. Recently, I rooted my device and installed ClockWorkMod Recovery and the Lagfix+OC Kernel by der_caverman. I am using the Stock ROM with that Kernel.
My question is when the official Gingerbread Update comes out by LG, will I be able to update it with the official LG software updater or will it not work because I have ClockWorkMod Recovery installed.
If not, how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!
I already asked the same question
the thread: http://forum.xda-developers.com/showthread.php?t=1102423
the solution: http://forum.xda-developers.com/showthread.php?p=13396506#post13396506
good luck
lonerguy said:
how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=1065197
or
http://www.megaupload.com/?f=XGKNWZQJ
you can just flash any recovery given above.its a zip file just flash the zip as you flash roms.one of the links contains original recovery for p500.
thanks...it worked
thank you guys...
If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks
siva-kumar said:
If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks
Click to expand...
Click to collapse
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
its alwayes advisable to have a custom recovery and custom rom. cause it can take nandroid backups(will save your day if anything goes wrong)
josinpaul said:
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
Click to expand...
Click to collapse
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).
zekozeko said:
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).
Click to expand...
Click to collapse
it is risky since you have changed the frame work.if i were you i will do the following.
1)unroot the phone( if u have used gingerbreak use the same to unroot)
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash. thus u can getrid of amonra and get back original p500 recovery
3)reboot and hard reset and upgrade.
4) since u are now on original recovery and in unrooted condition if any thing goes wrong u can claim warrenty.
let me ask u why u need an upgrade? to get lot of crapwares? or to get amere 600mhz kernal? or to get a laggy phone with mere 60 mb of internal storage space to install all ur apps? or to have adds on every apps?
go for http://forum.xda-developers.com/showthread.php?t=946354
its stable,beautiful,oced and updated gingerbread.
Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...
zekozeko said:
Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...
Click to expand...
Click to collapse
ya its up to you to decide...and i agree with u absolutly.but i aint had any problems with mik's 6.5.2(not using francos ker cause some error with cpu freq settings, u have to use setcpu).
Just one more question - when you said:
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash.
Click to expand...
Click to collapse
you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry
zekozeko said:
Just one more question - when you said: you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry
Click to expand...
Click to collapse
yes its a flashable unsigned zip.but if u r using amonra to flash( cause it is unsigned) u have to uncheck the option "toggle signature verify" first.Amonra wont allow u to flash unsigned zips unless u do the above.
ps:if original recovery is flashed u will lose all the options in amonra and the only option will be the hard reset option.
there is a good how to section if u wish...
http://tablet-crunch.blogspot.com/2011/01/lg-optimus-t-rooting-recovery-rom.html
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=901247
I'm Newbie, and I'm using LG Optimus Z ( know as LG KU9500/SU950 ). I want install ClockworkMod to recovery rom. It run android 2.2.2
Show me please.
Thanks every one very much.....
Hye Expert.. i wanna ask a few question that i still confused about it.. plz give me a solution
im using Atrix non 4G 4.3.13.AsiaRetail
1)can be unlocked with same method like AT&T?
2)if im unlocking, can i get Custom ROM with any version?
3)its possible if i change system version to 4.1.83 using pudding?
4)i didnt find step to use pudding software, whats tool needed and how to use it?
still no lucky
Thought of getting one of the atrix. Looking at the upgrade of gingerbread makes me wanting this phone more, but Singapore local sets are all brand unlocked. Only bootloader is still locked. I assume we could flash our local sets to AT&T then unlock the carrier, then upgrade to 2.3.4?
Can any guys help?
Do NOT flash AT&T software, this will BRICK your phone!
For root, GingerBreak worked for me.
There are two type of unlock, CARRIER unlock and BOOTLOADER unlock.
All phones sold in singapore must be CARRIER unlocked by law.
As for BOOTLOADER unlock, use this link and flash the INTERNTIONAL/BELL version NOT the AT&T version.
Do you need step by step instructions for bootloader unlock?
@trinityb4
In reply to your other post, the safest way to get Gingerbread now is to
1.Unlock bootloader
2.CWM
3.Custom ROM =D
NEVER NEVER NEVER flash an AT&T .sbf file! Their Atrix is slightly different!
don't root on asia retail 3.1.0 or 3.1.3 .. i got my internal-sd formatted by itself after ramdom reboots (not rooting on 1st time)
but i got the rooting fine on stock rom if i flash to other europe rom such as Orange UK 4.20, Spain retail 4.33 etc..
i got no idea why but i try numerous time on with asia retail seems to have this problem but no problem with stock european roms.
best is to unlock bl and flash to att 4.59.1 with rooting
trinityb4 said:
Thought of getting one of the atrix. Looking at the upgrade of gingerbread makes me wanting this phone more, but Singapore local sets are all brand unlocked. Only bootloader is still locked. I assume we could flash our local sets to AT&T then unlock the carrier, then upgrade to 2.3.4?
Can any guys help?
Click to expand...
Click to collapse
we can't flash stock att 2.3.4 rom like this, RSD wont't allow to. we got to go by unlock way and flash tenfar's recovery in and cwm custom att 2.3.4.
pennzoilgtr said:
don't root on asia retail 3.1.0 or 3.1.3 .. i got my internal-sd formatted by itself after ramdom reboots (not rooting on 1st time)
but i got the rooting fine on stock rom if i flash to other europe rom such as Orange UK 4.20, Spain retail 4.33 etc..
i got no idea why but i try numerous time on with asia retail seems to have this problem but no problem with stock european roms.
best is to unlock bl and flash to att 4.59.1 with rooting
Click to expand...
Click to collapse
so its working if my version 4.3.13 flash to Att 4.59.1
and the step should i use is
1)Unlock bootloader using international
2)install CWM
3)install 4.59.1? with tools?
raunamaxtor said:
so its working if my version 4.3.13 flash to Att 4.59.1
and the step should i use is
1)Unlock bootloader using international
2)install CWM
3)install 4.59.1? with tools?
Click to expand...
Click to collapse
Thanks Guys!
So now i have it. The Atrix
version.4.3.13.MB860.AsianRetail.en.03
Android ver - 2.2.2
Baseband ver - N_01.95.00R
Kernel ver - 2.6.32.9
[email protected] #1
SMP PREEMPT Tue Jun 21 18:05:24 CST 2011
Build # - OLYEM_U4_3.1.3
Guys, what should i do now?
Should i charge the phone and do a fastboot (vol down + power button) select vol up on fastboot on the phone top screen, open cmd and carry on with the unlock bootloader thing?
i saw the tutorial on youtube. should i follow the steps?
i dont really want to hard brick this phone cos i luvin it.
and really need to upgrade to gingerbread for faster browsing speed and such.
hope you great people can help me through it, thank!
matthew yes i need your help!!!!
http://forum.xda-developers.com/showthread.php?t=1136261
Please follow all the step state in above treat. If u follow exactly, it will be successful. I am using Singapore starhub atrix & unlocked with those method from above link. Now I am using dark side 1.3 with faux kernel.
Sent from my MB860 using Tapatalk
pswin09 said:
http://forum.xda-developers.com/showthread.php?t=1136261
Please follow all the step state in above treat. If u follow exactly, it will be successful. I am using Singapore starhub atrix & unlocked with those method from above link. Now I am using dark side 1.3 with faux kernel.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Gee Thanks pswin.
i'll try it soon.
trinityb4 said:
Gee Thanks pswin.
i'll try it soon.
Click to expand...
Click to collapse
Hi Guys!
Bootloader had been unlock sucessfully! yes!!!
now bros, can anyone suggest how to upgrade to gingerbread roms? cos i'm really sick of 2.2.2.
Many thanks!
trinityb4 said:
Hi Guys!
Bootloader had been unlock sucessfully! yes!!!
now bros, can anyone suggest how to upgrade to gingerbread roms? cos i'm really sick of 2.2.2.
Many thanks!
Click to expand...
Click to collapse
Flash any custom roms in development treat. I already tried all roms (including fruit cakes 2.3.4 roms). I prefer dark side v1. 3 & alien v4 for daily use. Other roms also good but I like blur gb & launcher. The best thing is please read this treat for reference.
http://forum.xda-developers.com/showthread.php?t=1154600
Sent from my MB860 using Tapatalk
Be sure to use proper kernel while flashing roms. Latest roms already support for international. Must thank to Dev's.
trinityb4 said:
Gee Thanks pswin.
i'll try it soon.
Click to expand...
Click to collapse
pswin09 said:
Be sure to use proper kernel while flashing roms. Latest roms already support for international. Must thank to Dev's.
Click to expand...
Click to collapse
Hi pswin09, thanks for the info. +1 for you.
so now how did you get to flash the 2.3.4 roms? and how about the kernel?
since now i had already unlocked the boot, i seen on youtube sayig flash using sd card? i still not sure.
guess i'm like you loving the stock gingerbread new blur look like if its stock 2.3.4. help me out with this pls.
so btw are u on line?
Mine is doing well with Alien #4 very well at this moment. I think i'll stick to this ROM till official CM7 for Atrix is released.
Kernel for international version is already included so you don't need to worry about that
spiderx_mm said:
Mine is doing well with Alien #4 very well at this moment. I think i'll stick to this ROM till official CM7 for Atrix is released.
Kernel for international version is already included so you don't need to worry about that
Click to expand...
Click to collapse
Hi spiderx, can you tell me what should i use to flash into the ninja rom?
eg. wat should i download?
much thanks.
6
trinityb4 said:
Hi spiderx, can you tell me what should i use to flash into the ninja rom?
eg. wat should i download?
much thanks.
Click to expand...
Click to collapse
Hey, first you must install cmw recovery on your phone.
http://forum.xda-developers.com/showthread.php?t=1156040
Second must download latest ninja rom v 0.45 full & kernel to your SD card.
http://forum.xda-developers.com/showthread.php?t=1173843
Kernel please select v 0.1.7 for international below
http://forum.xda-developers.com/showthread.php?t=1156040
Third reboot your phone to cmw recovery and follow below instruction.
1 : wipe data factory reset (use volume button to scroll down. Use power button or search button to select.
2 : wipe cache partition
3 : choose install zip from SD card
4 : choose rom zip file in SD card and scroll down to yes & select yes. (Will take 2 to 5 minute, be patient) . For karnel also follow this step
5 : After finished press reboot system now.
After reboot u will see the change.
Sent from my MB860 using Tapatalk
pswin09 said:
6
Hey, first you must install cmw recovery on your phone.
http://forum.xda-developers.com/showthread.php?t=1156040
Second must download latest ninja rom v 0.45 full & kernel to your SD card.
http://forum.xda-developers.com/showthread.php?t=1173843
Kernel please select v 0.1.7 for international below
http://forum.xda-developers.com/showthread.php?t=1156040
Third reboot your phone to cmw recovery and follow below instruction.
1 : wipe data factory reset (use volume button to scroll down. Use power button or search button to select.
2 : wipe cache partition
3 : choose install zip from SD card
4 : choose rom zip file in SD card and scroll down to yes & select yes. (Will take 2 to 5 minute, be patient) . For karnel also follow this step
5 : After finished press reboot system now.
After reboot u will see the change.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Good stuff!
i saw the video in youtube.
will carry on cmw then flash... to ninja rom, then kernel.., then bang!
gingerbread here i come...
Thanks! You guys have been a great!
I will report back once it's done.
Dear pswin09,
Found my answer already...
Hi guru,
I had download the cmw file extracted it, renamed recovery.img (as in short recovery) and put it into my c drive without folder.
Then i run cmd prompt
C:\Users\vaio>cd c:\atrix <enter>
c:\atrix>fastboot flash recovery recovery.img <enter>
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
what went wrong?
edit; ok i did not root the phone.
now i've rooted it with gingerbreak and try again to see the outcome.
Rom:
Version: 408
Build: 20707
Android version: 2.3.3
Build date: Dec 1, 2011
Changelog:
First official 2.3.3 pkg
Dell Stage 1.5
Swype 2.27.69.19339
Install instructions:
Recommended: make a backup of userdata with preferred method
Flash a region 14 recovery: stock 319 recovery.img
download Thunder_408_20707_14.pkg
copy update.pkg to sdcard
reboot into recovery mode
follow onscreen instructions
finished
I expect that this rom cant be rooted at all as it's likely that every known exploit has been patched. I'm going to attempt to make a pre-rooted/custom rom in the upcoming days.
so i can install this rom following the same procedure over my 2.3 olleh rom?
i.e only placing this pkg file to sd card and update it or i have to again update the system.img and this pkg file again through fastboot mode?
you need a region 14 recovery installed, use the 319 one if you're not sure.
TheManii said:
Rom:
Version: 408
Build: 20707
Android version: 2.3.3
Build date: Dec 1, 2011
I'm going to attempt to make a pre-rooted/custom rom in the upcoming days.
Click to expand...
Click to collapse
I would be willing to beta test your pre-rooted rom if you want, with 319 recovery loaded and adb working I should be able to get out of any problems.
The venue is a bit down on my priority list as I already have other things I promised to make. Also as I cant test stuff myself.
Are you comfortable using fastboot? You of course will need 408 installed for the various firmwares, feel free to actually confirm if none of the rooting tools work.
As the venue has comparatively few safety nets, everything you do of course is at your own risk.
kakagi said:
so i can install this rom following the same procedure over my 2.3 olleh rom?
i.e only placing this pkg file to sd card and update it or i have to again update the system.img and this pkg file again through fastboot mode?
Click to expand...
Click to collapse
If you using olleh rom before,you can direct upgrade,no need use recovery fastboot again
1. Download rom 407 rom, rename to update.pkg to TF card.
2. hold Vol - and vol + keep swith on the phone to upgrade
Holding off until confirmed rootable
I'm holding off until someone confirms this one is rootable.
Hi, just like to confirm that the baseband ver. remains as GTOUB1A140614-AWS？ With the new rom，only OEM ver. is updated to GTOUB1A140814，build 20707？ thanks pals
Sent from my Dell Venue using XDA App
can i flash previous rooted system.img using fastboot in this?
kakagi said:
can i flash previous rooted system.img using fastboot in this?
Click to expand...
Click to collapse
You could, but unless it's 408 based that defeats the purpose.
408 rooted
Looks like Luihui has rooted 408 for us, see his thread.
michaeljwestii said:
Looks like Luihui has rooted 408 for us, see his thread.
Click to expand...
Click to collapse
can you give me link of his thread?
Link
changkho1908 said:
can you give me link of his thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1354393
michaeljwestii said:
http://forum.xda-developers.com/showthread.php?t=1354393
Click to expand...
Click to collapse
thanks you, but i can't download "115.com/file/aqoa9e6q#
system233菜单汉化.rar" link, i am not chinese plz upload into mediafire, thank u so much
changkho1908 said:
thanks you, but i can't download "115.com/file/aqoa9e6q#
system233菜单汉化.rar" link, i am not chinese plz upload into mediafire, thank u so much
Click to expand...
Click to collapse
I don't read Chinese either, but if you watch the countdown timer in the center of the screen, when it goes away it reveals 4 tabs. The two on the right both link to the file. The one on the far right appears to be working but very slow. I will let it go for a couple of hours and see if it finishes downloading.
michaeljwestii said:
I don't read Chinese either, but if you watch the countdown timer in the center of the screen, when it goes away it reveals 4 tabs. The two on the right both link to the file. The one on the far right appears to be working but very slow. I will let it go for a couple of hours and see if it finishes downloading.
Click to expand...
Click to collapse
well, thank u once more time!! i'm downloading it now.
speed download is very slow 80kb/s
well the 408 rom is rooted now so can we except now a custom deodexed rom and a CWM
Hi Kakagi,
Its great news that 408 is rooted, will it run MMI and USSD codes or as Manii said region 14 (olleh kt) roms dont support them. Help me out I had to downgrade to Froyo to run these codes.
Thanks.
You will need to flash the 319 recovery then use the 319 pkg
I did that and I am running froyo. Both MMI & USSD codes are working. Wanted to know if any of the new GB updates support MMI & USSD codes function.
Thanks.
OK i fix it with help of English teacher ::::::: <---not this one
I have HTC sensation unlock s-off root by unidentified web site revolutionary-0.4pre4
and install revolutionary root ROM
i want to install ARHD ICS
Is it much likely to get my phone brick? Can i fix it if it will be brick? Or will it be useless forever?
can i install it without the framework 3.30 as it has been explained in its guide?
kamranhaghighi said:
Hi sorry for my English
sorry i really search for a right answer but some 1 tell me its fixable and its really low chance and if u install roms from sd nothing happens and if u jsut need a recovery.....
so is brick fixable or my phone become brick for ever or its fixable anyway......
and does i ned to get frimware for installing Android Revolution HD
i'm aleary s-off and rooted with revolutionary-0.4pre4
does i brick if install Android Revolution HD with out frimware? just
go info recovery and update from sd cart and chose the Android Revolution HD ?????
Click to expand...
Click to collapse
Took me a while to understand you, but if you can get into recovery your device is NOT bricked.
Brick = your device is rendered useless, such as your device wont boot into bootloader or recovery.
Sent from my SGH-T989 using XDA
i have a unknown ROM from revolutionary site but now i wonna install arHD
does it unroot my phone???
does i need to install framware and clockword?
i also have a versian of clockworld?
and
how much is risk of bricking?????
does it fixable???????
i wonna copy it info SD
if u can't also understand i call my bro he's english is well!!! really sorry
Heres how u flash an arhd ics rom
Flash 4ext touch recovery. Its an apk.
Flash 3.32 fw provided in arhd thread.
Boot in recovery flash superwipe.
Flash rom
Enjoy ics
GeNexus
AOKP
Francos latest
-VabeachFC-
i know all but how much is risk of brick and its fixable??? if copy in sd cart
and 4ext touch recovery is banned here can't go to android market
can i use the revolutionary-0.4pre4? to isntall rom
and does i need Flash 3.32 fw? i'm rooted i'm depress and angry right now!!!! sorry for my English
Google his website. U can pull the apk grom his site for free
GeNexus
AOKP
Francos latest
-VabeachFC-
Revolutionary is only a tool to get s off. U flash the 3.32 fw thats assigned to ur carrier
Ok once more il try to be more detailed.
Revolutionary is an s off tool.
Flash a recovery. Clockworkmod is fine.
Flash the su.zip in recovery.
Next u will need to do a supercid.
After that find ur ics rom,superwipe zip, and 3.32 FW !!!!that is assigned to your carrier!!!!
Boot into bootloader "white screen" it will flash the 3.32 fw. Once finished click recovery. Run suoerwipe.zio. flash rom. Done
GeNexus
AOKP
Francos latest
-VabeachFC-
Everything u need to know cN be found in mike1986 android revolution 6.6.1 rom thread. Are you having a hard time because of your english? If u need help doing it. Just message me and il help u more.
GeNexus
AOKP
Francos latest
-VabeachFC-
REALLY thanks!!!! my problem fixd! but i still don't know risk of bricking!
kamranhaghighi said:
REALLY thanks!!!! my problem fixd! but i still don't know risk of bricking!
Click to expand...
Click to collapse
Not sure about your specific device, but I have intentionally tried bricking my mytouch4g just to show my scary cat friend that HTC phones are almost immune (well the mytouch4g with the good eMMC atleast) to bricking.
The only way I would think you would brick your phone is if your eMMC dies- this c an happen for various reasons such as pulling the battery while writing something into the eMMC (like when rooting).
Then again anything can happen especially if you have a faulty device- so be careful and always read the instructions before flashing, and you should be good.
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
jaazii said:
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
Click to expand...
Click to collapse
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
how to flash a stock 2.3.6??? i don't know. am new to it
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Download Odin (can be found in this forum)
Download your stock firmware 2.3.6 (I dont know about the CHN_CHN Version)
Put your phone into Download Mode. (Power Off, Hold volume down+home+power button)
Run Odin
Choose PDA file which is your stock firmware.
Flash
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Use search.. You will find lots of topics,, Anyways, following link will guide you :
http://forum.xda-developers.com/showthread.php?t=1110160
IMPORTANT : While choosing model from the dropdown on Checkfusdownloader, choose "GT-I9100G"... Do not choose "GT-I9100".
相信你是个中国人，要不然应该不能买到中国版的9100G。
用Odin刷5文件包吧…………
can any one please give me the link of android 2.3.6 rom for i9100G ???
jaazii said:
can any one please give me the link of android 2.3.6 rom for i9100G ???
Click to expand...
Click to collapse
try this..http://forum.xda-developers.com/showthread.php?t=1533091
..and try to find ur needs..
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
I tried this before when I first flashed to CM9, I get bootloops. Since then, I forever stick to ICS and never trying to convert back to GB although I wish to do so. I dare not and i'm lazy to deal with the bootloops.. I not sure why I get bootloops btw, some other ppl faced that as well. So I hope this brother able to convert back to GB successfully. Good luck.
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
GoZoU1 said:
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
Click to expand...
Click to collapse
So end up you success? Would you mind to share the old GB bootloader? Not the stock rom. Is the particular bootloader. Thanks!!
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
GoZoU1 said:
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
Click to expand...
Click to collapse
I can flash GB stock GDZKL3 after flashing this bootloader right? bootloader should flash before flashing rom, or after flashing the rom? Thanks.
I tried both options. Try flashing the bootloader at first but don't forget to uncheck "Auto-Reboot" in odin. After that you should be able to flash the stock GB ROM. Do you have a jig just in case of any problems? I remember I used my jig, but don't really know why.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A