when i plug my usb cable in the phone i lose the control of my phone and even the touch screen do not respond and start doing many things by itself.
the screen is stuck and my phone is not accessible but my phone return accessible only when i unplug the usb.
Need your help !
Thanks !!
Related
so my phone screen and notification lights are non-responsive
however, when plugged into PC, it kinda gets detected but
fastboot return XXXXX and adb says device not found
while a replacement if on the way, there's a lot of stuff on the phone
i would like to retrieve if possible... any help is appreciated
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
samsungs424 said:
In sum, earlier today I was using my phone with no problems-- calls, texts, using apps etc. I went to 'close my screen' when I was done using it and I realized the side power/lock screen button was not working and my screen was not responding when I wanted to lock it. I removed the battery hoping it would reset the phone and fix what was wrong but now my phone will not turn back on. I plugged the phone into the wall for at least 30 minutes as well as plugging it in the computer for quite some time. No response from the phone at all. (no charging icon, computer is not detecting the usb cable when plugged into computer, etc.)I also held the buttons down to try to power on as well.
I was wondering if there was a way to fix this problem, or somehow retrieve files (mainly pictures) from the phone,
Thank you for your help. Any feedback will be greatly appreciated.
Andrew
Click to expand...
Click to collapse
Did you try to boot into download mode?
1057
michaely123 said:
Did you try to boot into download mode?
Click to expand...
Click to collapse
I attempted to hold volume down, power and home buttons but the phone did not respond. The computer is also not recognizing it while plugged in via usb. The button does not seem to be 'stuck' as i can still hear a slight clicking sound when I press it.
Try removing the battery and hold power down for 30 seconds and then try installing the battery again.
Try that ^
maybe a jig might help
Hi guys,
My screen recently died. Before fixing it at a specialized shop, I want to retrieve the data from the phone. Sadly the phone is pattern-locked and until I unlock it I can't access the data when I connect it to my PC. The screen is essentially dead. The image is almost totally black except for small layer in left top corner and the touch sensor is unresponsive, but other than that the phone works and receives notifications and so on.
USB Debugging mode isn't active on the phone and thus I can't replicate the screen of the phone on my PC through software alone, when I connect it via micro-USB. I also didn't think of this problem in advance and I'm not registered on Sony's FindMyMobile or any similar apps.
I tried using a HDMI-MHL adapter and I confirmed that the phone is indeed working because I'm able to get the phone screen's image on my TV. The problem is I can't actually interact with the phone because as I said earlier the touch sensor is not working.
The HDMI-MHL adapter I've used also seems to have a micro-USB port but that seems to work for power only. If I connect a USB-OTG cable on it and connect a USB mouse to it I get image but no mouse. If I connect the USB-OTG and the mouse, alone, I get a mouse cursor but I can't see what I'm doing (phone vibrates as I 'try' and draw the unlock-pattern blindly).
So, Sony Xperia Z3 Compact screen is dead, I wanna connect my Xperia to my TV via HDMI AND use a mouse at the same time to control my phone. Is this possible_
I also thought of another option... go to recovery mode and flash a zip that removes lock. I thought of trying step by step (switch keyboard and TV al the time just to get at point where I can find zip file and flash it). Unfortunately in recovery mode the phone does not allow to stream to TV. It only works when phone is after SIM lock.
Two additions: by removing and re-installing ADB on my laptop my phone is unauthorized. Only a matter of clicking on yes/allow on phone but that's not possible and TWRP 3.1.1-0 is installed.
Anyone any clue? I know I ask a lot but I'm searching the internetz for 2 days now and I'm devistated.
THNX a great bunch!!!
ciao
Valentijm
PS Copy/paste a part of the text from a guy from the internet who had exactly the same problem as I did but his thread ended a few months ago without result.
Just 30 minutes after my post I magically had all the dots correct and that blind!!! So turned on USB debugging and got rid of lock pattern. It was a nice three days of my life Guess there was no solution than getting lucky like I did or screen replacement and getting all your data removed.
ciao
Hi, I'm not sure how to start this, sorry..
My LG G5 has a problem where every time I plug in a OTG cable, a notification comes up that says power supply.. When I tap on the notification it give the options like charging only, power supply, MTP etc..
If I tap on MTP, the notification will go away, then will pop up again POWER SUPPLY. It is very annoying.
Not sure how to fix it. Any help is appreciated! Thank you!
Maybe the otg is lose thaty why its fluctuating try again by placing the phone on any surface like bed or table plug the cable and try not to move the phone and cable, this is what i do when i connect my phone to my computer if the phone is in my hands then i face the same problem so i follow this method i mentioned
Hi! I'd like some help.
I have a Samsung Galaxy S10e (SM-G970F).
The power button is faulty, I got it back from service yesterday, unfortunately it was not repaired because the device is rooted.
Before I handed it in for service, I was able to turn it on without the power button (download mode -> restart), but now the download mode is not available either.
And it doesn't indicate charging either, the display is completely black at all times.
Yesterday the computer recognized it as a drive, but it showed only one TWRP folder. Today, unfortunately, the computer does not even recognize it, nothing happens when the usb cable is connected.
Is it possible that the device has remained in some service mode?
Somehow I would have to reboot or get into download mode, I just don’t know how..
So now:
The display is completely dark.
It does not respond to buttons.
The power button is broken.
It does not indicate charging.
The download mode does not start. (volmune down + bixby button & connect usb data cable -> nothing happens.)
The computer does not indicate a usb connection.
The adb doesn't see either: error '(null)' not found.
What can I do?
To me it seems phone's boot-loader is broken: a working boot-loader would start Android's "init" process what automatically starts ADB on phone, if USB-debugging got enabled on phone, what in turn would make the phone accessable via USB.
jwoegerbauer said:
To me it seems phone's boot-loader is broken: a working boot-loader would start Android's "init" process what automatically starts ADB on phone, if USB-debugging got enabled on phone, what in turn would make the phone accessable via USB.
Click to expand...
Click to collapse
Thanks for the reply.
However, I have new news about the device.
I realized that the device itself works, only the display is always dark.
I disassembled, unplugged the battery from the motherboard, and switched back to download mode and Odin recognized it.
I managed to update the software on it, the device restarted fine, only the display is completely dark.
The computer already recognizes it, I can give a command via adb, and I can hear the volume button when pressed.
The only problem is that there is no picture on the display.
I reconnected the display connector to the motherboard, but that wasn't the problem.
When the power is off, the display does not indicate that the charger is connected.
Does anyone have any idea what else I can do?
Mr. BonG said:
Thanks for the reply.
However, I have new news about the device.
I realized that the device itself works, only the display is always dark.
I disassembled, unplugged the battery from the motherboard, and switched back to download mode and Odin recognized it.
I managed to update the software on it, the device restarted fine, only the display is completely dark.
The computer already recognizes it, I can give a command via adb, and I can hear the volume button when pressed.
The only problem is that there is no picture on the display.
I reconnected the display connector to the motherboard, but that wasn't the problem.
When the power is off, the display does not indicate that the charger is connected.
Does anyone have any idea what else I can do?
Click to expand...
Click to collapse
Your hardware is faulty, replace the screen.
Sent from my SM-S767VL using Tapatalk