Related
I recently purchased an unlock galaxy s2 i9100. It is supposed to be GSM unlock with HSPA+ 21Mbps/HSUPA 5.76Mbps, EDGE/GPRS Class 12, Quad band GSM 850/900/1800/1900, Quad band UMTS 850/900/1900/2100 hardware capabilities. since I have gotten the phone i have not been able to connect to anything but edge. Tmobile assured me i had the correct APN setting. I would like to know if anyone know what I could to to enable the HSPA+ T mobile US uses UMTS 2100 to connect. I rooted and flashed the lite'ning rom.
http://forum.xda-developers.com/showthread.php?t=1095274
I am a bit of a newby and would appreciate any advice.
Nope you won't get hspa speeds on Tmobile with the current international version. You have to wait for the Tmobile variant. International version gets
3g speeds only on att.
Sent from my GT-I9100 using xda premium
Kantankerousmind said:
T mobile US uses UMTS 2100 to connect.
Click to expand...
Click to collapse
This is correct. However, it's only used for one way traffic (either uploading or downloading, i'm not sure which). UMTS 1700 is used for the other direction of traffic on T-Mobile. This means no 3G/4G without both frequencies.
Your 2 options:
1. Get a T-Mobile phone.
2. Switch to AT&T.
Electroz said:
This is correct. However, it's only used for one way traffic (either uploading or downloading, i'm not sure which). UMTS 1700 is used for the other direction of traffic on T-Mobile. This means no 3G/4G without both frequencies.
Your 2 options:
1. Get a T-Mobile phone.
2. Switch to AT&T.
Click to expand...
Click to collapse
kirdroid said:
Nope you won't get hspa speeds on Tmobile with the current international version. You have to wait for the Tmobile variant. International version gets
3g speeds only on att.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
thanks for the quick and concise responses. I have a clarification: does this mean that I when Tmobile comes out with the variant my phone will be able to upgrade to Hspa via a rom or radio update or that if i want to keep this model i will have to wait to swap it out for the tmobile version
Kantankerousmind said:
thanks for the quick and concise responses. I have a clarification: does this mean that I when Tmobile comes out with the variant my phone will be able to upgrade to Hspa via a rom or radio update or that if i want to keep this model i will have to wait to swap it out for the tmobile version
Click to expand...
Click to collapse
The I9100 will NEVER work on T-Mobile. The SGS2 that they are releasing has different HARDWARE. There will never be a way to make the phone you have now work on T-Mobile 3G.
As others have said you'll need a different phone in order to get it to work on T-Mobile USA's 3G/4G frequencies.
You'd need a penta-band phone in order for it to work on all of them. I think Intel is curently working on that or already did but that's all there is. You'd need both 1700/2100mhz in order to use it with 3G.
I don't get how people don't research before they buy!!
Sent from yo momma
Hey Everyone,
I just picked up an unlocked/unbranded GTI-9100 and am only picking up the Edge network for T-Mobile USA. Is there a certain Modem or Kernel I need? The 9100 is on 2.3.3, so I guess I should root it and flash upgraded ROM/Kernel package? I am fimilar with ODIN as I have a Vibrant and a T-Mobile GS2.
Thanks in advance for your help.
I think you should double check your network settings and APNs
Sent from my GT-I9100 using XDA App
ionious said:
I think you should double check your network settings and APNs
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
My APN is the same as on my other T-Mobile phones?? HELP Please
Guess im just gonna ODIN the speedmod Kernel for root and Clockwork. Can an american get some help with his international phone?? Dang!!
You might get some help if you wait until someone with an answer reads your post .Thats assuming from the tile they pick up is a Yankee with an international version ..
If modem and kernel you have now dont work i cannot see why others would .
jje
vabeach454 said:
Hey Everyone,
I just picked up an unlocked/unbranded GTI-9100 and am only picking up the Edge network for T-Mobile USA. Is there a certain Modem or Kernel I need? The 9100 is on 2.3.3, so I guess I should root it and flash upgraded ROM/Kernel package? I am fimilar with ODIN as I have a Vibrant and a T-Mobile GS2.
Thanks in advance for your help.
Click to expand...
Click to collapse
With the GT-I9100, you'll ONLY ever get Edge on T-Mobile USA. Doesn't matter what you flash. The phone simply doesn't have the hardware to receive 1700mhz UMTS, which is one of two necessary bands (the other being 2100mhz UMTS) for 3g/4g on T-Mobile USA's network.
The GT-I9100 will only ever get HSPA/HSPA+ on AT&T's network in the US. I'm sure of this - I have an I9100, and am on AT&T.
Sorry to be the bearer of bad news.
ctomgee said:
With the GT-I9100, you'll ONLY ever get Edge on T-Mobile USA. Doesn't matter what you flash. The phone simply doesn't have the hardware to receive 1700mhz UMTS, which is one of two necessary bands (the other being 2100mhz UMTS) for 3g/4g on T-Mobile USA's network.
The GT-I9100 will only ever get HSPA/HSPA+ on AT&T's network in the US. I'm sure of this - I have an I9100, and am on AT&T.
Sorry to be the bearer of bad news.
Click to expand...
Click to collapse
Thanks ^^^ That kinda sucks, but sounds like nothing I can do.
vabeach454 said:
Thanks ^^^ That kinda sucks, but sounds like nothing I can do.
Click to expand...
Click to collapse
Nope. Not short of getting an AT&T account just for that phone, anyway.
...
(sorry, here comes some snark)
Unless you're comfortable cracking open the phone, ripping out the antenna, replacing it with one that will receive 1700/2100 mhz UMTS, decompiling the OS, tweaking it to recognize the new frequencies, and recompiling.
ctomgee said:
Nope. Not short of getting an AT&T account just for that phone, anyway.
...
(sorry, here comes some snark)
Unless you're comfortable cracking open the phone, ripping out the antenna, replacing it with one that will receive 1700/2100 mhz UMTS, decompiling the OS, tweaking it to recognize the new frequencies, and recompiling.
Click to expand...
Click to collapse
Thanks... Looks like I can sell it for GOOD money to AT&T people for a good profit. I traded my wifes MyTouch 4G for it , so I am still in the good.
maybe flash KI3 modem... most stable one atm in my opinion!
omgitsniklas said:
maybe flash KI3 modem... most stable one atm in my opinion!
Click to expand...
Click to collapse
Extremely stupid answer please read post 6.
jje
omgitsniklas said:
maybe flash KI3 modem... most stable one atm in my opinion!
Click to expand...
Click to collapse
Really??? *facepalm*
vabeach454 said:
Hey Everyone,
I just picked up an unlocked/unbranded GTI-9100 and am only picking up the Edge network for T-Mobile USA. Is there a certain Modem or Kernel I need? The 9100 is on 2.3.3, so I guess I should root it and flash upgraded ROM/Kernel package? I am fimilar with ODIN as I have a Vibrant and a T-Mobile GS2.
Thanks in advance for your help.
Click to expand...
Click to collapse
Im also in the US on t-mobile got this phone, and had no idea id only get edge. Edge does suck but I love this phone, ill keep this phone for awhile
How do I get the exclamation point off at bootup? Another Kernel??
vabeach454 said:
How do I get the exclamation point off at bootup? Another Kernel??
Click to expand...
Click to collapse
You can either get a USB jig or flash a stock kernel back. Try a search. This has been asked a CRAPTON of times.
ctomgee said:
You can either get a USB jig or flash a stock kernel back. Try a search. This has been asked a CRAPTON of times.
Click to expand...
Click to collapse
OK... Thanks.
Ok I used my jig and cleared binary, but its still in DL mode. Can i restart the phone or do I have to use odin now?
EDIT: Nevermind I got it. lol
Remove battery .
jje
Just found this forum... have the exact same issue. I have the GT-I9100 Intl version from Australia and now in the USA for a couple of weeks using T Mobile.
The dude behind the counter asked if my phone was unlocked, which it is. I told him that it supports Quad Band UMTS 850, 900, 1800 and 2100mhz and he said I'd get full HSPA+ reception on the 2100mhz band...
Sure enough, it's only Edge. I THINK there might be a setting in the Device Config (on keypad * # * # 197328640 # * # *) and possibly change something to use the US 2100mhz or something like that...
I can live with using Edge, but just interesting whether it's just a config setting that needs to be changed in the handset itself to pickup a different connection type for US 2100mhz bands?
Whip Cracker said:
Just found this forum... have the exact same issue. I have the GT-I9100 Intl version from Australia and now in the USA for a couple of weeks using T Mobile.
The dude behind the counter asked if my phone was unlocked, which it is. I told him that it supports Quad Band UMTS 850, 900, 1800 and 2100mhz and he said I'd get full HSPA+ reception on the 2100mhz band...
Sure enough, it's only Edge. I THINK there might be a setting in the Device Config (on keypad * # * # 197328640 # * # *) and possibly change something to use the US 2100mhz or something like that...
I can live with using Edge, but just interesting whether it's just a config setting that needs to be changed in the handset itself to pickup a different connection type for US 2100mhz bands?
Click to expand...
Click to collapse
I9100 only gets Edge on T-mobile USA because it doesn't receive 1700 WCDMA. If you want 3g/"4g" you'll have to go to ATT or another carrier that uses the same frequencies...
T-mobile USA uses AWS for high speed mobile internet, which REQUIRES BOTH 1700 & 2100mhz WCDMA. One is used for uplink, the other for downlink. Only receiving one of them won't work, which is why you're only getting Edge.
Dude behind the counter is wrong and doesn't seem to know how AWS works.
EDIT: BTW, UMTS and WCDMA are somewhat interchangeable in this instance.
Just curious
Wind uses the AWS band for 3G and HSPA data transfer, this is the same band that is used by T-Mobile USA, the GT-I9100M (Bell's SGS2) doesn't support these bands so your data will be limited to 2G speed, it will however work properly as a phone. If you want faster data speeds you will need to get your hands on a T-Mobile USA version of the SGS2.
Ah okay. That's disappointing to know.
But thanks for the detailed reply.
SGS2 GT-I9100M Bell Canada want to use with Wind Mobile Canada
Sepharite said:
Ah okay. That's disappointing to know.
But thanks for the detailed reply.
Click to expand...
Click to collapse
Hi, sorry to jump into this thread, but I am in the same position and I would like to know how did this work for you if you went ahead with this phone into Wind service.
I started a thread and some body there told me maybe better to ask in these two threads... my problem is explained here:
http://forum.xda-developers.com/galaxy-s2/help/qa-friendly-qa-thread-t1648351/post54374435
Thanks a lot for any contribution to my solution.
Hey whats up erybody?
Im new to the forum as well as the android flashing/modding scene as i've always had an iPhone but recently gave in to this Galaxy sII as it looks and performs amazing. The only issue I have currently is I own an ATT Galaxy sII that is unlocked and I am using for T-Mobile but cannot get any 3G/4G network at all.
This phone is rooted and running cyanogen mod on ICS 4.0.4. I have read online about people flashing there ATT Note's radio to force your phone to accept 3G/4G for T-Mobile and I was just wondering if this is possible for the Galaxy SII? I tried using the same method but no luck, can anyone possibly point me to the right modem to install if one is available? This phone is great but I cant stand this slow ass EDGE signal.
Thanks :cyclops:
wexpac said:
Hey whats up erybody?
Im new to the forum as well as the android flashing/modding scene as i've always had an iPhone but recently gave in to this Galaxy sII as it looks and performs amazing. The only issue I have currently is I own an ATT Galaxy sII that is unlocked and I am using for T-Mobile but cannot get any 3G/4G network at all.
This phone is rooted and running cyanogen mod on ICS 4.0.4. I have read online about people flashing there ATT Note's radio to force your phone to accept 3G/4G for T-Mobile and I was just wondering if this is possible for the Galaxy SII? I tried using the same method but no luck, can anyone possibly point me to the right modem to install if one is available? This phone is great but I cant stand this slow ass EDGE signal.
Thanks :cyclops:
Click to expand...
Click to collapse
First off, you're in the wrong forum for your device.
This is the forum for the i9100, the international Galaxy S2.
You say you have the AT&T Galaxy S2... Which is the SGH-I777.
Second, since ATT and T-mobile use different frequencies for high speed mobile data, most devices for ATT will only get Edge on T-mobile. Vice versa, most devices for T-mobile, if unlocked for ATT, will only get Edge on ATT's network. SOME devices you can flash a different modem, because they have the requisite antenna hardware to get the necessary frequencies.
Unfortunately for you, the SGH-I777 isn't one of them.
Unless, you actually have the Skyrocket, which is the SGH-I727. (check the label under the battery to get the exact model number) That phone, you CAN flash a T-mobile modem to it and get high speed on T-mobile's network.
Ahhh I see. When I power on the phone it displays the international model however in the menu settings it does say SGH-I777 which is why I was a little confused since there are so many differen't models aparently.
Looks like im screwd until later this year when/if T-Mobile does go good on there word that they will be acquiring new towers to promote the other frequencies for ATT devices. Thanks for the reply.
wexpac said:
Ahhh I see. When I power on the phone it displays the international model however in the menu settings it does say SGH-I777 which is why I was a little confused since there are so many differen't models aparently.
Click to expand...
Click to collapse
The boot screen and indeed, the about phone screen can change depending on what is flashed to the phone. So if you flash an i9100 firmware to an i777, it will then display the wrong model when booting. Which is why I said to check the label under the battery to be sure.
wexpac said:
Looks like im screwd until later this year when/if T-Mobile does go good on there word that they will be acquiring new towers to promote the other frequencies for ATT devices. Thanks for the reply.
Click to expand...
Click to collapse
I wouldn't hold my breath for this to help you.
ctomgee said:
First off, you're in the wrong forum for your device.
This is the forum for the i9100, the international Galaxy S2.
You say you have the AT&T Galaxy S2... Which is the SGH-I777.
Second, since ATT and T-mobile use different frequencies for high speed mobile data, most devices for ATT will only get Edge on T-mobile. Vice versa, most devices for T-mobile, if unlocked for ATT, will only get Edge on ATT's network. SOME devices you can flash a different modem, because they have the requisite antenna hardware to get the necessary frequencies.
Unfortunately for you, the SGH-I777 isn't one of them.
Unless, you actually have the Skyrocket, which is the SGH-I727. (check the label under the battery to get the exact model number) That phone, you CAN flash a T-mobile modem to it and get high speed on T-mobile's network.
Click to expand...
Click to collapse
CTOMGEE,
I have the i9100 International Galaxy S2 and am wondering if I can access 3G speeds on T-Mobile? I know the phone is not 4G compatible, so unfortunately I won't be able to access those speeds, but I am wondering if I will be forced to use the EDGE network.
ellewms said:
CTOMGEE,
I have the i9100 International Galaxy S2 and am wondering if I can access 3G speeds on T-Mobile? I know the phone is not 4G compatible, so unfortunately I won't be able to access those speeds, but I am wondering if I will be forced to use the EDGE network.
Click to expand...
Click to collapse
Check your thread
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
ellewms said:
CTOMGEE,
I have the i9100 International Galaxy S2 and am wondering if I can access 3G speeds on T-Mobile? I know the phone is not 4G compatible, so unfortunately I won't be able to access those speeds, but I am wondering if I will be forced to use the EDGE network.
Click to expand...
Click to collapse
Not as of now. T-Mobile in the US uses AWS currently for 3g and "4g". This band requires both 1700 & 2100 mhz for data to get these speeds. The phone doesn't get 1700, do it won't get higher than Edge.
There are rumors T-Mobile will be re-purposing 1900 mhz (which the phone DOES get) for data, so if and when that happens, the phone will probably get high speed mobile data. But until then, you're out of luck for T-Mobile with this phone, and will have to use ATT to get high speed data.
Ananda
Hi ctomgee and others, I'm using a Galaxy S2 GT-I9100 that was bought unlocked. I'm also getting only 2G speeds on T-mobile. Could you tell me what is flashing the T-mobile modem and how it is done? Can I try to do this so that I can get 3G speeds? If this is not possible, would I get 3G speeds if I buy a S2 from T-mobile?
On the sidelines: What do they do to the phone that the phones bought from T-mobile would work but the others won't? Is it something done to the hardware or the software? If the change is in the software, can't we try to do it ourselves - are there any online tutorials on this?
ctomgee said:
Not as of now. T-Mobile in the US uses AWS currently for 3g and "4g". This band requires both 1700 & 2100 mhz for data to get these speeds. The phone doesn't get 1700, do it won't get higher than Edge.
There are rumors T-Mobile will be re-purposing 1900 mhz (which the phone DOES get) for data, so if and when that happens, the phone will probably get high speed mobile data. But until then, you're out of luck for T-Mobile with this phone, and will have to use ATT to get high speed data.
Click to expand...
Click to collapse
ananda.b said:
Hi ctomgee and others, I'm using a Galaxy S2 GT-I9100 that was bought unlocked. I'm also getting only 2G speeds on T-mobile. Could you tell me what is flashing the T-mobile modem and how it is done? Can I try to do this so that I can get 3G speeds? If this is not possible, would I get 3G speeds if I buy a S2 from T-mobile?
On the sidelines: What do they do to the phone that the phones bought from T-mobile would work but the others won't? Is it something done to the hardware or the software? If the change is in the software, can't we try to do it ourselves - are there any online tutorials on this?
Click to expand...
Click to collapse
Flashing a modem is essentially changing the software drivers for your antenna. This does not, however, change what frequencies your phone is capable of receiving. This is a hardware limitation.
The T-mobile USA Galaxy S2 is model number SGH-T989 - a totally different model than the GT-I9100. The hardware is completely different. The size itself, the CPU/GPU/SoC, the antenna hardware - all different. This isn't something you can fix with flashing a modem.
If you are patient, as I stated above, T-mobile USA is in the process of re-purposing a frequency the I9100 DOES get so it will get 3/4g on T-mobile. When that happens in the market you are in is up to T-mobile.
ctomgee said:
First off, you're in the wrong forum for your device.
This is the forum for the i9100, the international Galaxy S2.
You say you have the AT&T Galaxy S2... Which is the SGH-I777.
Second, since ATT and T-mobile use different frequencies for high speed mobile data, most devices for ATT will only get Edge on T-mobile. Vice versa, most devices for T-mobile, if unlocked for ATT, will only get Edge on ATT's network. SOME devices you can flash a different modem, because they have the requisite antenna hardware to get the necessary frequencies.
Unfortunately for you, the SGH-I777 isn't one of them.
Unless, you actually have the Skyrocket, which is the SGH-I727. (check the label under the battery to get the exact model number) That phone, you CAN flash a T-mobile modem to it and get high speed on T-mobile's network.
Click to expand...
Click to collapse
I spent hours online chatting with support trying to get this information and they couldn't provide it. 10 minutes of internet searching and you said EXACTLY what I needed to know. Thank you sir!! Helped me a ton.
Also, just a heads up. At the end of this year (2012) T-Mobile is going to launch their 1900 mhz band towers (see: newsroom.t-mobile(d0t)com/articles/4GNetworkEvolutionVendorsSelected) so AT&T phones that use that 4G band will work with T-Mobile once unlocked and moved over.
Thanks again!
Roelith said:
I spent hours online chatting with support trying to get this information and they couldn't provide it. 10 minutes of internet searching and you said EXACTLY what I needed to know. Thank you sir!! Helped me a ton.
Also, just a heads up. At the end of this year (2012) T-Mobile is going to launch their 1900 mhz band towers (see: newsroom.t-mobile(d0t)com/articles/4GNetworkEvolutionVendorsSelected) so AT&T phones that use that 4G band will work with T-Mobile once unlocked and moved over.
Thanks again!
Click to expand...
Click to collapse
Looks like i occasionally get the 4G speeds on tmobile on my i9100, but it switches between Edge and 4G quite frequently. Anyone know how to force a 4G?
mok86 said:
Looks like i occasionally get the 4G speeds on tmobile on my i9100, but it switches between Edge and 4G quite frequently. Anyone know how to force a 4G?
Click to expand...
Click to collapse
You can set the network mode to WCDMA only... but I think there's a problem with that. If you wander into an area where T-mobile doesn't have "4G" coverage on 1900mhz, then I don't think you'll have any signal at all. When it is set to GSM/WCDMA (Auto mode), it switches automatically to Edge if you don't get the "4G" signal.
Wrong forum, this is for the international i9100 not Skyrocket.
TheATHEiST said:
Wrong forum, this is for the international i9100 not Skyrocket.
Click to expand...
Click to collapse
The OP is from July. The guy above me today was asking a general question, and ATT sells TWO variants of the GS2 - the SGH-I777, which is their branded regular Galaxy SII, and the SGH-I727, which is the "Skyrocket" - which is the variant that has LTE.
I'm confused
Sent from my Zanpakuto using Getsuga Tensho!
Nick281051 said:
I'm confused
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
Guy posted in i9100 forums because he tripped the flash counter causing his phone to say i9100 so he was confused and posted there. Asked about TMO only getting 2g and was already answered,
ctomgee said:
You can set the network mode to WCDMA only... but I think there's a problem with that. If you wander into an area where T-mobile doesn't have "4G" coverage on 1900mhz, then I don't think you'll have any signal at all. When it is set to GSM/WCDMA (Auto mode), it switches automatically to Edge if you don't get the "4G" signal.
Click to expand...
Click to collapse
Same problem , get mostly Edge and Very less 4G with my International 9100 in T Mobile. Was wondering if a modem change will fix the problem . I am currently on Slimbean Rom. Any suggestions guys ?
nikunj_cal said:
Same problem , get mostly Edge and Very less 4G with my International 9100 in T Mobile. Was wondering if a modem change will fix the problem . I am currently on Slimbean Rom. Any suggestions guys ?
Click to expand...
Click to collapse
No. Its a hardware thing. Not that complicated to understand really.
Sent from my Galaxy Nexus
Pirateghost said:
No. Its a hardware thing. Not that complicated to understand really.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Agreed since we are missing 1700mhz here but I was wondering whether its possible to capitalize on the 1900 mhz freq.
nikunj_cal said:
Agreed since we are missing 1700mhz here but I was wondering whether its possible to capitalize on the 1900 mhz freq.
Click to expand...
Click to collapse
hello every one I was wondering I have the i9100 and I have metropcs on it and I also flashed omni rom on it but I was thinking that I need to flash the us radios on it because I got it from Japan and as I can make calles they drop alot and the network is so slow so is this something where I would need to flash that ? and if so can someone post a link for the file's?
Hi everyone,
What settings can I use to configure my phone to T-mobile? I have an ATT unlocked 920 and I only get E signal. At times it switches to 4G and it drops. I read many posts about changing connection speed but I don't have the option. Is there a firmware that I should install in order to get the most use out of my phone?
Thanks to anyone that can help out.
wantlivenow said:
Hi everyone,
What settings can I use to configure my phone to T-mobile? I have an ATT unlocked 920 and I only get E signal. At times it switches to 4G and it drops. I read many posts about changing connection speed but I don't have the option. Is there a firmware that I should install in order to get the most use out of my phone?
Thanks to anyone that can help out.
Click to expand...
Click to collapse
Also, is it possible to make ATT phone see Wind/Mobility AWS networks by flashing a different ROM?
lumia 920 unlocked
netgh0st said:
Also, is it possible to make ATT phone see Wind/Mobility AWS networks by flashing a different ROM?
Click to expand...
Click to collapse
I unlocked my Lumia 920 at&t version yesterday. But it didn't worked with mobilicity. I don't know what's the problem. Can any one help.
It seems that ATT version, unlike Rogers version, has AWS disabled. And apparently it is not controlled by the firmware image itself, because I flashed Rogers rom. We need to find a way to turn it back on...
netgh0st said:
It seems that ATT version, unlike Rogers version, has AWS disabled. And apparently it is not controlled by the firmware image itself, because I flashed Rogers rom. We need to find a way to turn it back on...
Click to expand...
Click to collapse
So even that didn't worked??? I think so it wont gonna work.I just emailed to nokia care they say, even flashing the phone with different rom wont gonna work. It's not controlled by firmware.Then too i am planning to flash with rogers version!1 What you suggest????
nokian10 said:
So even that didn't worked??? I think so it wont gonna work.I just emailed to nokia care they say, even flashing the phone with different rom wont gonna work. It's not controlled by firmware.Then too i am planning to flash with rogers version!1 What you suggest????
Click to expand...
Click to collapse
What is AWS?
will att lumia 920 work with tmobile 4g network?
wcwei5800 said:
will att lumia 920 work with tmobile 4g network?
Click to expand...
Click to collapse
For some reason, when I go to different areas around my city, I get 4G, but when I am at home, it switches to edge.
wantlivenow said:
What is AWS?
Click to expand...
Click to collapse
AT&T version doesnt have 1700 frequency so it wont gonna work on WIND / MOBILICITY.
nokian10 said:
AT&T version doesnt have 1700 frequency so it wont gonna work on WIND / MOBILICITY.
Click to expand...
Click to collapse
I still don't get this part - are phones sold by ATT and Rogers different in hardware? Because people reported using Wind/Mobilicity on inlocked Rogers phones without any issues. I was under the impression that ATT phone should also work if flashed with Rogers firmware. Is it not the case?
---------- Post added at 09:40 AM ---------- Previous post was at 09:34 AM ----------
wantlivenow said:
What is AWS?
Click to expand...
Click to collapse
AWS stands for Advanced Wireless Services (wikipedia). It uses 1700 MHz and 2100 MHz bands, and only a few phones support these bands.
So there no way to enable 4g on a AT&T Lumia. I love this phone but if there no way to fix this then what the point on having a slow connection
I have it enabled after they gave me the unlock code. I haven't done anything special to enable it apart from the regular phone updates. I'm not in the USA.
netgh0st said:
I still don't get this part - are phones sold by ATT and Rogers different in hardware? Because people reported using Wind/Mobilicity on inlocked Rogers phones without any issues. I was under the impression that ATT phone should also work if flashed with Rogers firmware. Is it not the case?
---------- Post added at 09:40 AM ---------- Previous post was at 09:34 AM ----------
AWS stands for Advanced Wireless Services (wikipedia). It uses 1700 MHz and 2100 MHz bands, and only a few phones support these bands.
Click to expand...
Click to collapse
yes, Thats what nokia canada told me in a reply that even if you flash it, it wont gonna work
wantlivenow said:
Hi everyone,
What settings can I use to configure my phone to T-mobile? I have an ATT unlocked 920 and I only get E signal. At times it switches to 4G and it drops. I read many posts about changing connection speed but I don't have the option. Is there a firmware that I should install in order to get the most use out of my phone?
Thanks to anyone that can help out.
Click to expand...
Click to collapse
AT&T L920 has AWS 3G disabled by default. You must flash an alternate ROM to enable it.
peconaut said:
So there no way to enable 4g on a AT&T Lumia. I love this phone but if there no way to fix this then what the point on having a slow connection
Click to expand...
Click to collapse
Yes you can.
nokian10 said:
yes, Thats what nokia canada told me in a reply that even if you flash it, it wont gonna work
Click to expand...
Click to collapse
They are wrong. They do not want people flashing ROMs on their phone so of course they'll say something like that.
Flash a different ROM to enable AWS band.
http://forum.xda-developers.com/showthread.php?t=2097815&highlight=aws+3g
petard said:
AT&T L920 has AWS 3G disabled by default. You must flash an alternate ROM to enable it.
Yes you can.
They are wrong. They do not want people flashing ROMs on their phone so of course they'll say something like that.
Flash a different ROM to enable AWS band.
http://forum.xda-developers.com/showthread.php?t=2097815&highlight=aws+3g
Click to expand...
Click to collapse
I looked through the thread and I assume this method is still possible? If I enable the AWS band will I be able to get 3g and 4g on my phone? (Currently, I have E and 4G, but my house is at the end of the 4g signal...lol.)
wantlivenow said:
I looked through the thread and I assume this method is still possible? If I enable the AWS band will I be able to get 3g and 4g on my phone? (Currently, I have E and 4G, but my house is at the end of the 4g signal...lol.)
Click to expand...
Click to collapse
Yes, you will have 100% access to ALL of T-Mobile's network.
BUT the European ROM does not call HSPA+ "4G", it says H+ in the status bar. The European networks never followed T-Mobile's bull**** of calling HSPA+ a 4G network.
Look at the RM-821 column in this chart to see what each connection type will be labeled with a European ROM.
http://forum.xda-developers.com/showpost.php?p=37197816&postcount=51
If you WANT I believe you can flash the Rogers ROM after flashing the Euro Dev ROM if you want the T-Mobile connection labels. Rogers and AT&T L920 ROMs also get updates before the European ROMs, so that is another thing to consider.
petard said:
Yes, you will have 100% access to ALL of T-Mobile's network.
BUT the European ROM does not call HSPA+ "4G", it says H+ in the status bar. The European networks never followed T-Mobile's bull**** of calling HSPA+ a 4G network.
Look at the RM-821 column in this chart to see what each connection type will be labeled with a European ROM.
http://forum.xda-developers.com/showpost.php?p=37197816&postcount=51
If you WANT I believe you can flash the Rogers ROM after flashing the Euro Dev ROM if you want the T-Mobile connection labels. Rogers and AT&T L920 ROMs also get updates before the European ROMs, so that is another thing to consider.
Click to expand...
Click to collapse
I'm currently on European DEV ROM. How exactly do you folks confirm that AWS is indeed working? Can anyone please confirm that you were able to get Wind Home on unlocked ATT Lumia 920 that has been flashed to Rogers, European and then back to Rogers ROM?
netgh0st said:
I'm currently on European DEV ROM. How exactly do you folks confirm that AWS is indeed working? Can anyone please confirm that you were able to get Wind Home on unlocked ATT Lumia 920 that has been flashed to Rogers, European and then back to Rogers ROM?
Click to expand...
Click to collapse
If you are able to connect to an AWS network. I personally use AT&T so I can't test it out, just repeating what others have said. What I know is that people with Rogers pentaband RM-820s flashed the AT&T ROM and that disabled AWS. Flashing Rogers back didn't re-enable it. So it seems that some ROMs like AT&T reprogram the bands and some like Rogers don't. I don't know any of this for sure, though.
petard said:
If you are able to connect to an AWS network. I personally use AT&T so I can't test it out, just repeating what others have said. What I know is that people with Rogers pentaband RM-820s flashed the AT&T ROM and that disabled AWS. Flashing Rogers back didn't re-enable it. So it seems that some ROMs like AT&T reprogram the bands and some like Rogers don't. I don't know any of this for sure, though.
Click to expand...
Click to collapse
The most important question now is - which ROMs can reprogam these bands back. With TMo its hard to confirm you are actually getting AWS and not the 1900 MHz 3G. I'm waiting for someone to confirm that with a true AWS carrier (Wind, Mobilicity).
netgh0st said:
The most important question now is - which ROMs can reprogam these bands back. With TMo its hard to confirm you are actually getting AWS and not the 1900 MHz 3G. I'm waiting for someone to confirm that with a true AWS carrier (Wind, Mobilicity).
Click to expand...
Click to collapse
Yeah if you're in an area with 1900MHz 3G then it is impossible to tell I think. I do not believe the 920 has any good diagnostics app.
Reading through the forums though multiple people have stated that AT&T ROM disables AWS and that euro dev ROM enables AWS. One person stated that the euro dev ROM did not enable AWS and instead he flashed through a ton of different ROMs including some latin america ROMs before finally getting AWS enabled. It's all in the thread I linked to earlier from January.