For anyone interested, I have just successfully flashed the official ICS OTA update on my Australian Tablet S. I assume this will also work for any other region.
I simply used the All-In-One tool to change my region to US. The OTA update was then available and I downloaded and installed it with no issues at all.
Be aware, if you use this method to update, you will loose your root access and there is currently no method to root the tablet when it has been updated with an official OTA zip.
Wifi only or 3g version?
WiFi only. The ICS update for WiFI and 3G doesn't exist yet.
3g version of the tablet is available in australia?
Correct.
http://www.sony.com.au/productcategory/sony-tablet
Can you give some detail on what and how...I am not a techie but would like upgrade. I have a UK tablet
Sent from my HTC Sensation using XDA Premium HD app
REMEMBER: At present it is not possible to root a tablet which has been upgraded using this method. Once you update, you will loose Root access, which makes changing the region back to your original country impossible. Only use this method if you don't care that you will loose root.
While this worked just fine for me, I'm not promising it will work for others. Try this at your own risk.
Step 1. Install the ADB drivers using the instructions here
Step 2. Download and run the All-In-One tool from here
Step 3. Follow the on screen instructions to Root your Tablet. Once this is completed and the device has rebooted, open AIO tool again.
Step 4. Follow the on screen instructions to change your Region to US.
Step 5. Reboot your tablet and go to settings-About-System Update. It should prompt you to download the 4.0.3 update now.
Step 6. Download and follow the instructions on screen to update.
Sorry, one lastquestion.. you have flashed the official ota without changing any values oin the regiona build? if yes i must wait for the official australian version of the 3g to come out... here in italy as usual we will be the latest to have the update...
Sorry. I'm not sure I understand the question.
I had to change my region FROM Australia TO US to download the update over OTA.
There is currently no ICS update available for 3G devices anywhere. If you change your region to US and download the OTA update, you will lose 3G functionality all together. Plus, because there is no way to root the device once the update has been applied, you can't get back to the original ROM, or change your region back again.
It's a one way street at the moment, unless you use a pre-rooted ROM.
Sorry, but you have answered my question without wanting i only wanted to know if there is an official austrialan wifi only update, but you told me that you have changed the region to us... so, thank you... i only have to wait...
question
Sentinel196 said:
REMEMBER: At present it is not possible to root a tablet which has been upgraded using this method. Once you update, you will loose Root access, which makes changing the region back to your original country impossible. Only use this method if you don't care that you will loose root.
While this worked just fine for me, I'm not promising it will work for others. Try this at your own risk.
Step 1. Install the ADB drivers using the instructions here
Step 2. Download and run the All-In-One tool from here
Step 3. Follow the on screen instructions to Root your Tablet. Once this is completed and the device has rebooted, open AIO tool again.
Step 4. Follow the on screen instructions to change your Region to US.
Step 5. Reboot your tablet and go to settings-About-System Update. It should prompt you to download the 4.0.3 update now.
Step 6. Download and follow the instructions on screen to update.
Click to expand...
Click to collapse
cna i ask, is the usb cable required for the sony tablet a standard micro usb to usb cable??
Yes. I have used many different cables. If the shoe fits.....
another question
can you tell me if ics on the sony tablet s supports ad hoc wifi connections, its the main reason id like to upgrade to ics, has anybody tried it?
I have a rooted htc hd2 with barnicle wifi tether, it only has ad hoc as a wifi connection !!
plantechbartyn said:
can you tell me if ics on the sony tablet s supports ad hoc wifi connections, its the main reason id like to upgrade to ics, has anybody tried it?
I have a rooted htc hd2 with barnicle wifi tether, it only has ad hoc as a wifi connection !!
Click to expand...
Click to collapse
Sorry, no adhoc implemented in this tablet. No direct wifi too.
sebarkh said:
Sorry, no adhoc implemented in this tablet. No direct wifi too.
Click to expand...
Click to collapse
I know Ad Hoc is a software patch, but I think Direct WiFi is not possible on this Tablet's WiFi chipset. Needs newer hardware support that we don't have, unfortunately.
Happy to be proven wrong!
disadvantages to rooting
anyone know of any disadvantages to rooting the tablet and changing it to the US region.
I am thinking of doing this but still not sure.
I am in New Zealand with an Australian version
Thanks
I did this works fine except you lose root if you use the stock OTA
Sent from my GT-P6800 using Tapatalk 2
You'll get US content on Sony Entertainment Network services, rather than Australian.
More of an advantage if you ask me.
other than that, none that I'm aware of.
I'm pretty sure the All-in-one tool can set your region back after the update now too. But maybe check with Condi. It's changed since I flashed a week ago.
Can changing the region and downloading ICS brick your device in anyway??
I've got a UK Tablet S and TBH I'm close to selling it because I can't stand HC. I'm close to picking up a Moto Xoom just for ICS even though the screen is poorer and its as heavy as a brick.
Warren,
Just be sure to follow the instructions exactly. If you have any questions, just ask around here. I'm not taking responsibility for your device, so I won't say there is ABSOLUTELY NO CHANCE of it bricking, but a lot of people have done it without problems, myself included (I was on an Australian device).
Related
What's a known, working procedure for flashing a different firmware on my X10a? Currently it's got an AT&T R2CA016 firmware on it and I want to debrand the phone.
I've went through numerous guides, using the PC Companion and Update Service to replace files, problem is, the software tells me my phone is up to date, additionally there's no "Re-install" button on this software, so using the SE software seems useless.
I also looked at XS++ which couldn't connect to my phone. If anyone has an AT&T phone and has debranded it in the last month, please let me know which procedure you used.
FYI, I've backed up my APN using APN Backup & Restore.
Thanks.
aln688 said:
What's a known, working procedure for flashing a different firmware on my X10a? Currently it's got an AT&T R2CA016 firmware on it and I want to debrand the phone.
I've went through numerous guides, using the PC Companion and Update Service to replace files, problem is, the software tells me my phone is up to date, additionally there's no "Re-install" button on this software, so using the SE software seems useless.
I also looked at XS++ which couldn't connect to my phone. If anyone has an AT&T phone and has debranded it in the last month, please let me know which procedure you used.
FYI, I've backed up my APN using APN Backup & Resture.
Thanks.
Click to expand...
Click to collapse
I was stuck on 020 for ages, the old method (replacing the files) no longer works and if it does it complete luck. the method i used to debrand can be found at this thread http://forum.xda-developers.com/showthread.php?t=683793
download the version for your region, country or whatever. follow the instructions to install the 026 generic firmware and viola its debranded with the latest firmware
vengeance1990 said:
I was stuck on 020 for ages, the old method (replacing the files) no longer works and if it does it complete luck. the method i used to debrand can be found at this thread http://forum.xda-developers.com/showthread.php?t=683793
download the version for your region, country or whatever. follow the instructions to install the 026 generic firmware and viola its debranded with the latest firmware
Click to expand...
Click to collapse
Thanks, I'll give it a try later this afternoon. I just reading up on the Omnius method? It seems to rely on decrypted ROMs, which contain "phone.zip" and "android_xxx.zip". Any particular page to start reading the relevant information on? There's a 103 pages in that thread!
aln688 said:
Thanks, I'll give it a try later this afternoon. I just reading up on the Omnius method? It seems to rely on decrypted ROMs, which contain "phone.zip" and "android_xxx.zip".
Click to expand...
Click to collapse
Not to familiar with that method i dont think, i didnt read much into though (as i was getting ready for the 2.1 update)
the one i used was easy enough to use, basically click the exe which brings up a command prompt file, connect your phone in flash mode, hit any key and let it do its thing, worked perfectly first time after trying the switch the files method about 12 times
http://forum.xda-developers.com/show...49#post8170549
use the firmware files on there instead of the other one, thats the one i used
vengeance1990 said:
Not to familiar with that method i dont think, i didnt read much into though (as i was getting ready for the 2.1 update)
the one i used was easy enough to use, basically click the exe which brings up a command prompt file, connect your phone in flash mode, hit any key and let it do its thing, worked perfectly first time after trying the switch the files method about 12 times
Click to expand...
Click to collapse
I don't see any firmware links on that page, it's actually on the next page, page 43. A generic X10a R2BA026 firmware is listed there. I might give that a go, either way, SEUS of PC Companion is out in regards to flashing my phone, they won't work.
I was able to debrand the phone by flashing with a generic X10a R2BA026 using EXploid one click guide, however it is still locked to ATT. Anyone knows how to unlock the phone? Thanks.
Deadx10 said:
I was able to debrand the phone by flashing with a generic X10a R2BA026 using EXploid one click guide, however it is still locked to ATT. Anyone knows how to unlock the phone? Thanks.
Click to expand...
Click to collapse
What guide did you use to debrand your phone? Can you give me a specific link?
I'm not bothered if it's locked to AT&T, I just want the AT&T garbage removed from it, I thought rooting would do that, but rooting just gives me super-user access to muck up the phone by deleting crucial system files!
UPDATE: I used the Grospolina method, here. So far so good, at least my phone boots! This method worked fine.
Deadx10 said:
I was able to debrand the phone by flashing with a generic X10a R2BA026 using EXploid one click guide, however it is still locked to ATT. Anyone knows how to unlock the phone? Thanks.
Click to expand...
Click to collapse
If you're trying to use it on a different GSM network, You can Always go to one of the unlocking companies on the net...They use your IMEI number to unlock the phone.
OTHERWISE, If you're with AT&T, You CAN call customer care, Tell them you're traveling over-seas with your cell phone and you need it to be unlocked to use one of the UK's GSM Sim cards...
That's how I would do it personally
aln688 said:
I also looked at XS++ which couldn't connect to my phone. If anyone has an AT&T phone and has debranded it in the last month, please let me know which procedure you used.
FYI, I've backed up my APN using APN Backup & Restore.
Click to expand...
Click to collapse
You SHOULD be good to go! Once you Root it with the generic firmware...If not, I'm CONFIDENT you can find someone to help ya on here with reflashing it to AT&T's Stock Firmware. I went through the entire root, rebranded mine (since I was talking about taking it back to AT&T for the Captivate) And have re-rooted it again without a hitch
I followed this guide, as posted by Grospolina, and it worked perfectly, flashing it to a R2BA026 ROM. The root option also worked, and I installed the Market fix. In general, this IS how I want my phone, no AT&T garbage-ware installed. I'm content with this.
I tried other flashing guides, involving SEUS and PC Companion, all of them were a waste of time, due to a) The software kept telling me my phone was "up to date", and b) There was no "re-install" button to re-install the ROM on the phone. I WAS going to try Omnius which I suspect is a "pay-for" option, but this Grospolina guide worked 1st time. Many thanks to you Grospolina!
Now I can be busy re-installing some apps I wanted, and possibly restoring my APN file, I'm unsure if I need to at this point.
Diesel984 said:
If you're trying to use it on a different GSM network, You can Always go to one of the unlocking companies on the net...They use your IMEI number to unlock the phone.
OTHERWISE, If you're with AT&T, You CAN call customer care, Tell them you're traveling over-seas with your cell phone and you need it to be unlocked to use one of the UK's GSM Sim cards...
That's how I would do it personally
Click to expand...
Click to collapse
I called AT&T and they said that under some policies between AT&T and Manufacturer, they can't release the code. They asked to have the original owner of the phone to call in since I don't have the account with AT&T. I got this phone off Ebay, so I can't have the original owner to call in. I wonder if there is any other way to unlock it, because it is dead to me now since I can't use it under any other network....
Hello everybody!
I am starting this new thread to try compile a simple to follow and reasonably written complete guide for rooting an Xperia Neo 2.3.3. I am doing this because, although there are enough information and software on this forum and on the internet in general, these are not really structured and gathered in a way that a non-experienced user (a.k.a. "noob") can easily manage, and the process of rooting 2.3.3. is a bit more complicated than 2.3.2 with Gingerbreak for instance.
This guide is for Xperia Neo running Android 2.3.3 with locked bootloader. Other devices with 2.3.3. might be rooted in a similar fashion.
Update: 2.3.4. for the Neo is out. Everything here still works as described with the difference that you get the latest 2.3.4 when updating OTA.
WARNING: some users reported that after downgrading from 2.3.4 to 2.3.2 in order to root, the battery meter showed 0%. I am not yet aware of a solution to this problem. So beware if your Neo already has the latest version.
Warning: Neither myself, nor anyone else but YOU is responsible if you damage your phone in any way or lose any information after trying to root your phone by folowing this guide! Also note that your warranty will expire when you root. However, unrooting should be possible, in principle.
--- Guide start ---
1. Back up your data. You could do this using an app called Backup Master from the Android Market. Additionally, I had my contacts and calendar synchronized with my Google account. SMS messages were not properly backed up, but I didn't care about them anyway. If you do care, you might want to save them to your SD card, using the built-in option or just use another app. Also make sure your battery is at least half charged before starting.
2. Download FlashTool from here or directly here. Install it by simply unpacking it somewhere.
3. Download the generic firmware 2.3.2 from here or directly here. You do this because Gingerbreak (will come to that) uses a security vulnerability to gain root rights in 2.3.2. that has been fixed with the new 2.3.3. Extract the .ftf file from the .rar archive you just downloaded to the sub-folder "firmwares" of your Flashtools installation from step 2. (You might need WinRar for extracting)
4. Go to your Flashtool installation to the folder "drivers" and install ggsetup-2.2.0.10.exe. Download the USB drivers for your Neo from here. Unpack the contents of the archived folder "amd64" (if on Windows 64) or "i386" (if on Windows 32) to the folder "amd64" or "x86" respectively of the installation folder of Gordons Gate. The path might be something like "c:\Program Files (x86)\Sony Ericsson\Gordons Gate\". Run DPInst.exe to install the drivers.
Alternatively to this step, I think you could install the drivers by just installing PCCompanion and plugging in your phone, but I did it the hard way.
5. Run the file X10FlashTool.exe; click Flash; you should see the firmware you downloaded in step 3 in the appearing window if you extracted it correctly; click OK (I recommend you leave the option "wipe data" checked, although some users reported that it worked for them even without wiping the data); follow the instructions (note that the back button on the Neo is on the other side as pictured); the flashing should take no more than a couple of minutes; start your phone - this will take a bit longer the first time. If after the reboot the battery meter is showing 1%, shut down and take out the battery for a minute, then boot up again.
6. Get Gingerbreak from here of directly here. This is the exploit that actually roots the phone. Copy it to your phone and install. You can do this a number of ways. For example: install ES File Explorer from the Android Market, access your PC via WLAN with it and install it directly from there. You will be prompted to change the setting to allow the installation of apps from unknown sources in case you didn't change it already. Also allow USB-debugging in the same settings menu under "developer".
7. Run Gingerbreak and tap "root device". This shouldn't take more than a couple of minutes, although some users reported it taking hours. If it is taking very long, you might want to try inserting another SD card and repeating the attempt. When it's done, it will reboot. Now you have a rooted 2.3.2. You can check this by installing the app "root checker" from the Android Market. When you start "root checker" you will be asked by an app called "superuser" if you want to grant root access to this program. This "superuser" app was installed by Gingerbreak after rooting and manages which program has root permissions.
8. Now before doing anything, go to settings>info>software update> update now and get the new Android 2.3.3 OTA (= over the air, i.e. via WLAN or 3G). Do not do this via your PC, because you will unroot the phone. There have been a lot of problems reported with this step. If right after you tap "update now" you get the message "unable to connect" try shutting down, waiting a minute and booting up again or also try setting the date and time to the correct values, in case you have something like 01 Jan 1980. Other users said, it just took a lot of attempts before it worked and that the problem might be with the SonyEricsson servers... If after the update was downloaded you get some kind of error message like "cannot update" it might be because you did some changes to system files or possibly you used a non-original firmware in step 3.
After the update was done, check again for root access with the "root checker"
9. Restore the data you backed up in step 1 and enjoy.
Update: I managed to update to 2.3.4. Unfortunately I could not simply update OTA from my rooted 2.3.3. I kept getting an error message after downloading the update, probably because I had changed system files. So I did all the above steps again, with the difference that in step 8 I got the 2.3.4. from the SE server.
--- Guide end ---
Please click the Thanks button and/or reply to this post and write your own experience or suggestions/corrections.
A similar guide/tutorial/how-to has been posted before (Here). Perhaps not as detailed as yours but nonetheless, it's been done. And do give credit to the necessary people.
But good job on taking the time and writing this up. I'm sure a lot of Neo users will appreciate it.
Cheers!
xtacy! said:
A similar guide/tutorial/how-to has been posted before (Here). Perhaps not as detailed as yours but nonetheless, it's been done. And do give credit to the necessary people.
!
Click to expand...
Click to collapse
Actually, I did link directly to the thread you wrote, because it was one of my starting points. And to be rigorous, the steps enumerated there are from here, but with the firmware for Neo. The real credit goes to the programmers of Gingerbreak, Flashtool etc.
Like I said, I was just gathering information and detailing them, I don't take credit for anything other than taking the time to write the post.
Yup, I had actually included that initially i.e. that most of us already know these steps from the original thread but then wanted to give you credit for doing what you did.
And when I said give credit where it is due, I meant the actual people behind the programs and kistigun for his tutorial.
guys after i root my neo according to this guide the ota firmware i get will be unbranded? right?
By the way thanks for the guide, i might use it one day after i gain more knowledge about those things...
If you've flashed the generic firmware, then yes, you would be unbranded BUT you will still be locked to your network until you purchase the unlock key.
Unbranding would remove all your network specific apps (part of bloatware).
marcindpol said:
guys after i root my neo according to this guide the ota firmware i get will be unbranded? right?
By the way thanks for the guide, i might use it one day after i gain more knowledge about those things...
Click to expand...
Click to collapse
An OTA update won't remove the branding, but flashing will. It's what I describe in step 5.
I was just like you a couple of days ago, but I managed to learn all this over the weekend and did all I described here. (and a few things more ) Don't rush into it. Read everything coherent and helpful you can find first.
xtacy! said:
If you've flashed the generic firmware, then yes, you would be unbranded BUT you will still be locked to your network until you purchase the unlock key.
Click to expand...
Click to collapse
Thanks for the info. I didn't have any network locks or branding on mine, but it's good to know that for future reference.
Vorsprung said:
An OTA update won't remove the branding, but flashing will. It's what I describe in step 5.
I was just like you a couple of days ago, but I managed to learn all this over the weekend and did all I described here. (and a few things more ) Don't rush into it. Read everything coherent and helpful you can find first.
Click to expand...
Click to collapse
ok i think i understand now, but just to clarify:
if i flash generic (unbranded?) and then do the OTA or Pc Companion update, the update i get will also be unbranded?.
also will all the future updates be unbranded too?
Another question: since my neo is Irish Vodafone branded phone, which generic software i should flash in step 5?
Thanks a lot for help and please do not get annoyed by my questions as i am totally noob when it comes to those things, also sorry for my poor English...
marcindpol said:
ok i think i understand now, but just to clarify:
if i flash generic (unbranded?) and then do the OTA or Pc Companion update, the update i get will also be unbranded?.
also will all the future updates be unbranded too?
Click to expand...
Click to collapse
The answer should be yes to both questions. Once you've debranded your phone, it will not get "rebranded" (except if you flash it with a branded firmware). The generic firmware linked here is of course without any branding.
marcindpol said:
Another question: since my neo is Irish Vodafone branded phone, which generic software i should flash in step 5?
Click to expand...
Click to collapse
You could use the generic one, but you will lose the branding. I'm guessing you don't have a problem with that.
marcindpol said:
Thanks a lot for help and please do not get annoyed by my questions as i am totally noob when it comes to those things, also sorry for my poor English...
Click to expand...
Click to collapse
You're welcome! I'm not exactly experienced myself, so I don't guarantee that my answers are 100% accurate and correct...
I don't think your English is bad at all. Don't you speak English in Ireland?
Can anybody give more details on the branding issue?
Vorsprung said:
The answer should be yes to both questions. Once you've debranded your phone, it will not get "rebranded" (except if you flash it with a branded firmware). The generic firmware linked here is of course without any branding.
You could use the generic one, but you will lose the branding. I'm guessing you don't have a problem with that.
You're welcome! I'm not exactly experienced myself, so I don't guarantee that my answers are 100% accurate and correct...
I don't think your English is bad at all. Don't you speak English in Ireland?
Can anybody give more details on the branding issue?
Click to expand...
Click to collapse
Thanks a lot for the answers
hehe yes people in general speak English here in Ireland but lets not forget there are thousands of emigrants from around the world living here too, i am one of them
Can you please also write which generic firmware should i flash, UK, World or any other? (perhaps there is IE one?), and will it affect the frequency of getting future official updates from SE? (yes i want to get rid of Vodafone from my phone and stay with a 100% SE official firmware).
Thanks
Once you flash a generic firmware, future updates will all be generic updates as well.
Some of the plus points that I can see of having a generic firmware is that
a) updates are rolled out faster (as compared to branded firmware).
b) you get rid of a lot of junk that network providers seem to put in i.e. bloatware.
OK I am now on generic, unbranded Global International 1247-0875_R11C , of course 2.3.3, however I did not root my phone and used SEUS instead OTA.
Thanks a lot Vorsprung and others for help
I just flashed my Xperia Neo 2.3.2 global, applied Gingerbreak, and updated OTA to the last 2.3.3 firmware (4.0.A.2.368)
I confirm I kept root!
Kalram said:
I just flashed my Xperia Neo 2.3.2 global, applied Gingerbreak, and updated OTA to the last 2.3.3 firmware (4.0.A.2.368)
I confirm I kept root!
Click to expand...
Click to collapse
Same here
I follow this guide and got my Xperia Neo rooted! Thanks Vorsprung!!!
I wanted it root to install Google Talk with video! It works very well!
Now I want a way to unlock the bootloader, as I want to run Cyanogen mod
Ask the Admin for your own forum section about the Neo, all this OTA-root with the latest firmware just making me jealous.
flashmode
Hi guys!
well I just can follow till step 5. Opening the "X10FlashTool.exe" --> Click On flash. that's it. It tells me to enter the flash mode but how? I pressed&hold the menu button before plugging the usb cable onto my PC. Instead entering the flash mode it only starts charging my battery. Can somebody help ?
thanks a lot !
i was clicking the wrong button
I have rooted 2.3.2 (checked with rootchecker) but when I try to update OTA it says "Your phone already has the latest software".. Please help!!
Edit: Even says up to date using pc companion.
Hey Guys,
Im very new to the whole "Tablet World", I actually just purchased a T-Mobile Springboard via Ebay.
I have not yet recieved the tablet as it should arrive sometime this week, but I have been doing some research so that when it gets
here im not totally in the dark.
It is the 7"model and I believe it currently has HoneyComb installed on it, I would also assume it is locked under the Tmobile Network.
Since I live in Canada I would have to get it unlocked to be able to use it.
OK so here are all my questions...
Where can I get it unlocked, or could I do this myself somehow with software.
I want to install the most recent version of ICS ( I think its 4.0.3), would that require that I root my device?
If so can anyone send me the link to the download and instructions.
Does rooting the device cause any ill side effects? You know with the good comes some bad..lol
I was reading some people were having issues with certain things after the root.
I would love to be able to Text, make phone calls as well as browse..
is this all possible, if so how?
Thanks you guys are the smartest..
Jeff
Jamorn said:
Hey Guys,
Im very new to the whole "Tablet World", I actually just purchased a T-Mobile Springboard via Ebay.
I have not yet recieved the tablet as it should arrive sometime this week, but I have been doing some research so that when it gets
here im not totally in the dark.
It is the 7"model and I believe it currently has HoneyComb installed on it, I would also assume it is locked under the Tmobile Network.
Since I live in Canada I would have to get it unlocked to be able to use it.
OK so here are all my questions...
Where can I get it unlocked, or could I do this myself somehow with software.
I want to install the most recent version of ICS ( I think its 4.0.3), would that require that I root my device?
If so can anyone send me the link to the download and instructions.
Does rooting the device cause any ill side effects? You know with the good comes some bad..lol
I was reading some people were having issues with certain things after the root.
I would love to be able to Text, make phone calls as well as browse..
is this all possible, if so how?
Thanks you guys are the smartest..
Jeff
Click to expand...
Click to collapse
OK unlocking. First you will need your new sim. Then pop in the sim and it should bring up the sim unlock menu (it varies between 3.2 and ICS). Then load up tmobiles chat on the web site and ask to unlock the unit. They will unlock the unit as long as its paid off.
For ICS you can down load it directly from H unrooted:
http://www.huaweidevice.com/worldwi...thod=gotoProductSupport&productId=3779&tb=0);
FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel)
You can download rooted roms here. they are 99% untouched, im running the OsiMood which just has some stock apps removed, and the charging icon is text instead of a battery.
You shouldnt have any issues with a rooted rom. The only issues are with the cm9,AOKP and the ones with custom kernels.
You can text,talk,data on ICS only, and only if you are not on tmobile. You would have to be on att straitTalk or any other carrier. Tmobile is the only carrier thats says no no to all 3 on a tablet, at least in the usa. Tmobile gives you a choice of text/voice, or data only.
Thanks
Thanks a lot man.. I really appreciate any help I can get, and for you guys to take time out of your day to help someone out is great.
Ok so..it still didnt arrive..(getting impatiant) lol I guess its gotta go through Customs..
hmm.. ok so your saying I can download ICS directly from Huawei, will that work fine since its actually a Springboard and not a MediaPad.
Whats the difference between ICS and ICS rooted? Do I need to root, benifits?Which would be best and why?
If I need to root where are the links for the newest ICS rooted on XDA?
I wouldnt be with Tmobile, since there isnt any in Canada..
I already bought a SIM from Petro Canada Mobility
I was told It was best for cheap plans with unlimited Browsing, the only thing was that for data only applications that run through port 80 would work. The trick was to get a proxy app through Google Play and run all your shiat though port 80.
Makes sense?
Thanks!!
Ya I sent the link to the oem vesion. Tmobile puts their own rom on it and calls it a springboard.
Root gives apps more acess such as backups, or changing ui features.
The 2 latest roms are hwmod and osimood. They are about the same.
Cant help you with the proxy things
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
hmm
nightanole said:
Ya I sent the link to the oem vesion. Tmobile puts their own rom on it and calls it a springboard.
Root gives apps more acess such as backups, or changing ui features.
The 2 latest roms are hwmod and osimood. They are about the same.
Cant help you with the proxy things
Sent from my HUAWEI OsiMood MediaPad using Tapatalk 2
Click to expand...
Click to collapse
I went to the HUAWEI site and why would I go with HUAWEI MediaPad FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) ?
isnt there even newer ones?
there are like 5 above that one, like HUAWEI MediaPad FIRMWARE(S7-302u,Android4.0,C232B001,General Channel)
whats the difference
and how do i install it
You might want to wait a few days to see if T-Mobile makes good on their promise to push out ICS in an OTA update to the Springboard. You will be able to receive the update over wi-fi no matter which carrier you are running it on. It would save you some hassle in flashing international ROMs. Also I can vouch for the fact that the international ICS ROMs have some radio stability problems on the Springboard hardware - connections may freeze unexpectedly.
In terms of carrier compatibility in Canada:
- In theory the Springboard *should* work on Videotron, Wind and Mobilicity because it has the AWS HSPA band. Mine doesn't and I don't know why. It just won't connect with a WIND or Mobi SIM (haven't tested Videotron). It might be because I flashed an international ROM with a different radio.
- The Springboard has 1900 MHz HSPA but not 850. If you are going to use it on the Rogers network (which includes Rogers, Fido, SpeakOut and all their MVNOs), you will get a 3G/H signal in urban areas where 1900 MHz is used. In many locations though, their 3G service may be only on the 850 MHz band (which the Springboard can't access), in which case it will drop down to EDGE.
- If you try and use it on Bell, Telus or their sub-brands, you will get 3G/HSPA in urban areas, but in locales where the service is only on 850 MHz, you will get no signal at all. Bell/Telus has 3G/HSPA and LTE but no 2G/EDGE, so if you can't pick up the signal, it just drops.
S7-301u,S7-302u,S7-303u are the radio bands not firmware versions. 303u is the t mobile band, most people use the 301u. Just because firmwares came after it doesnt mean they are newer. 2 of the newer ones are just fixes for german and russian versions.
Wait for the offical tmobile version in the next few weeks, or download the version i told you.
To flash is easy:
unzip the file onto the root of your sd card
reboot the spring board
it will run the update, then tell you to remove the sd card
remove sd card
reboot system
either plug the sd card back into the spring board and remove the zip folder, or pop the sd card in a flash card reader and removed the zip folder with a pc
If you reboot the springboard again without removing the zip folder, it will reinstall again.
I just received mine today and want to try ICS. If I flash this FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) will I be still able to receive the official t-mobile version via OTA? How do I backup the stock rom?
Cant backup the original rom. Cant get the OTA if you flash the factory(non tmobile) ICS rom.
Sorry thats how it rolls. If we are slightly lucky someone will grab the OTA for us flashers and we will be set. Or H will release a 303 firmware to work with all the tmobile channels.
nightanole said:
Cant backup the original rom. Cant get the OTA if you flash the factory(non tmobile) ICS rom.
Sorry thats how it rolls. If we are slightly lucky someone will grab the OTA for us flashers and we will be set. Or H will release a 303 firmware to work with all the tmobile channels.
Click to expand...
Click to collapse
Thanks for the heads up. If I gone ahead and flash FIRMWARE(S7-301u,Android4.0,C232B005,General_Channel) will I still be able to use 4G/3G for tmobile? I understand that I can also use gsm voice/text with this firmware is that correct?
voice/text/data has to do with the carrier. att lets you do it, tmobile wont, its not about the firmware.
In your area you will either flash the 301 or the 302 firmware. They are the same other than what band they run in. They havent comes out with a 303 factory firmware yet.
Hmm
nightanole said:
voice/text/data has to do with the carrier. att lets you do it, tmobile wont, its not about the firmware.
In your area you will either flash the 301 or the 302 firmware. They are the same other than what band they run in. They havent comes out with a 303 factory firmware yet.
Click to expand...
Click to collapse
Ok.. Well I have had the device a couple days now and just been fooling around with it.
Now I would like to get this all in motion.
My question is, If I go with ICS from HUAWEI website, can I still root the device? and do I do that after or before.
and how?
I think I need to root it to run a Proxy program to run everything through port 80, which is what Petro Canada Mobility(Rogers) leaves open on Unlimited Browsing Plan.
Also in the instruction, you said put it in the "root" , what you mean by root, and thats on the micro sd right?
Jamorn said:
Ok.. Well I have had the device a couple days now and just been fooling around with it.
Now I would like to get this all in motion.
My question is, If I go with ICS from HUAWEI website, can I still root the device? and do I do that after or before.
and how?
Click to expand...
Click to collapse
Go to the huawei mediapad root thread on the development section, go to the link in the post number 28 (to modaco). You root it after updating the pad.
wtf
Ok well the Huawei site is F****** useless..
the download is terrible, goes superslow, and then when you try to extract to F: the **** is all corrupted..PDF doesnt work either
Jamorn said:
Ok well the Huawei site is F****** useless..
the download is terrible, goes superslow, and then when you try to extract to F: the **** is all corrupted..PDF doesnt work either
Click to expand...
Click to collapse
I don't know the current situation (since they revamped the site), but I've never got corrupted download. The last time I download stuff from there was when the ics source came out.
Sent from my HTC Glacier using Tapatalk 2
??
rurou said:
I don't know the current situation (since they revamped the site), but I've never got corrupted download. The last time I download stuff from there was when the ics source came out.
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
This Is starting to really bother me.. I tried like 4 sources and everyone boots and then stops durring update and says FAIL.
WTF?
I have failed once when trying to install a new firmware which turns out to be corrupted download (the firmware was one of those pre-rooted firmware). I also read someone failed many times and turns out the problem is in their sd card. If you have a spare sd card, you probably can try putting the firmware there or if you don't mind formatting your current card then you can also try that.
Sent from my HTC Glacier using Tapatalk 2
UPDATE
rurou said:
I have failed once when trying to install a new firmware which turns out to be corrupted download (the firmware was one of those pre-rooted firmware). I also read someone failed many times and turns out the problem is in their sd card. If you have a spare sd card, you probably can try putting the firmware there or if you don't mind formatting your current card then you can also try that.
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
Ok so here is the update.
I got 301u ICS General up and running, just curious on why I installed 301u over 302u. Which is better for my region (Montreal , QC) would be on Rogers network?
Because I have been having issues getting connected to network, wondering if I maybe installed wrong firmware.
Anyway, next step is to root.
1) Download Huawei MediaPad ROOT ICS Android 4.0.x.rar
2) Connect the tablet to your PC, install the driver.
3) In the settings of the tablet enable debugging by USB .
4) Unpack the archive.
5) Run the Install Root.cmd wait three reboots.
Ok, I downloaded the file to my Laptop, Im just confused on step 4 and 5 so I have stopped until I find out more informaion because I do not want do to it wrong.
"Unpack the Archive"? could someone maybe expand on this limited explanation. Do I extract the file to desktop or directly onto the tablet and same with running Root.cmd where do I run it from?
can someone please maybe explain the steps better then they were, I ve seen better instructions written on a carton of milk on how to open it, then this.
Jamorn said:
Ok so here is the update.
I got 301u ICS General up and running, just curious on why I installed 301u over 302u. Which is better for my region (Montreal , QC) would be on Rogers network?
Because I have been having issues getting connected to network, wondering if I maybe installed wrong firmware.
"Unpack the Archive"? could someone maybe expand on this limited explanation. Do I extract the file to desktop or directly onto the tablet and same with running Root.cmd where do I run it from?
can someone please maybe explain the steps better then they were, I ve seen better instructions written on a carton of milk on how to open it, then this.
Click to expand...
Click to collapse
I don't know about the better firmware, but since I'm using 301u pad with 301u firmware I haven't got any problem.
As for rooting.. Step 4 is extracting the file in your pc/desktop. Step 5 is running the install root.cmd while the pad connected to the pc.
please help me.
I have downloaded the firmware 4.0 general version then when I instal it but fail then i waitd for a second i dnt pull out the sdcrd then suddenly got battery low?when i bootd the phne it goes the message les than 30% it stucks there do i have to install the 3.2 again? Even fail to install the update of ics?does it mean that my 3.2 os wiped out??pls help me
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
mysticgorilla said:
Well it's regarding rooting.
I heard it opens up a world of opportunity with your smartphone, and some apps I really want are only available vain rooted phones. I have the Samsung galaxy s3 international version. It was originally from Australia if that matters at all. It is on 4.0.4. Anyways, being a noob to android more or less, and being a bit apprehensive (because I have no warranty and I cannot obtain another phone easily) I was wondering basically how risky it is to brick your phone in a) the process of rooting your phone. Is it common? If it does get bricked is it reversable by a restore or simply gone? Also after rooting, is there any upkeep or management I need to do to make sure my rooted phone does not screw up? And lastly. What is the safest and easiest way to root the international quad core gs3 on ics. Thank you to everyone for your time
Click to expand...
Click to collapse
Well, most you could pick up be reading a bit, everything is already explained around here but since i was in your shoes very recently:
- there's always a risk. You need to be aware of that. That said, most cases that actually go wrong it's usually user's fault who failed to follow instructions closely. So read them. And read some more. And then read again just to make sure. And then i'd read again.
I used this very recent method from chainfire (salute and donate to the man if you like and can, he deserves it) to root my 4.0.4 international GT-I9300 S3:
http://forum.xda-developers.com/showthread.php?t=1957273
Triangled away next and everything worked like a charm. This preserves everything as stock as possible just adding root to your phone.
- from what i can tell, as long as you don't do anything that messes with the bootloader, you can always recover from a procedure gone wrong. Just disconnect, remove battery, insert and try again. Rebooting the computer or changing usb ports usually helps too (on odin).
- after rooting successfully, the very first thing you should do is backup your /efs folder. This is easy, just pick up root explorer or some other file manager that allows exploring you root (/), go up in your folders until you get to / look for the efs folder and just copy it (NOT MOVE) elsewhere (sd card, external sd, your computer preferably, whatever, just have that safe). This will come in handy in case you lose your imei at some point. Just restore this folder's contents and you're good to go. If that happens and you don't have a backup, it's a f'ing pain you can do well without.
- anything else root related is just common sense. Since you have the potential to screw up your entire phone with root permissions (this is why you don't have them in the first place), if an app pops up asking for root permissions, be sure what it is before allowing. If you're not sure, you can always deny first and allow later in the superuser app.
- you can also look into backing up with nandroid. You can think of this as an image of your entire phone. With this you can restore your phone to the same state it was when you did it. Useful when something went wrong and your phone doesn't boot anymore or you just wanted to try new roms with the option of coming back to what you had before. Not sure how you do it on the S3 still, but it usually requires a modified recovery like CWM. The method to root above doesn't install one though, it preserves what you had. Check this instead if you're interested:
http://forum.xda-developers.com/showthread.php?t=1695238
Cheers dude, i'm sure everything will go well for you too.
Chance of a brick about .0001 % rising to 100% for those that are to lazy to read follow instructions .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
mysticgorilla said:
Thankyou very much to everyone who has read and replied to this. 3 more minor questions. Is there a way to first update my phone to jellybean 4.1 via Odin or something like that? Or is this possible after root, because I don't want to stay on ics. Also what exactly happens if I update while rooted. Does it wipe or unroot my phone or the like? Also should my phone be in use debugging, and lastly what does it mean to unlock my bootloaders? That was more than 3 questions sorry thanks again
Click to expand...
Click to collapse
1) You don't need to root to update to JB.
Just download any ROM you want from http://samsung-updates.com/device/?id=GT-I9300 (I recommend the UK unbranded ROM, BTU) then use Odin3 to flash it to your devices. Search the forums for specific instructions on this procedure. I'll just tell that it takes no more than 2-3 minutes.
2) If you're going to root, I suggest you do it beforehand, by flashing a kernel like Siyah (in ICS), and then proceed to flashing the stock JB ROM, HOWEVER, instead of using Odin3, you will use MobileOdion (available from Play Store), because that way you'll have a fully rooted and stock device.
3) Using step 2 above, it will not wipe not unroot your phone. It is safe and retains all your settings. That is the beauty of MobileOdin. There is a free version.
If you root and THEN install via Odin (PC), then you'll lose root, but not your settings.
In either case, you only wipe the device IF YOU WANT TO.
So, the best option is to:
a) Install SiyahKernel using Odin3 (PC)
b) Download the JB BTU ROM from http://samsung-updates.com/device/?id=GT-I9300
c) Extract the .md5 from the ZIP file and move it to the device's ext. sd card
d) Install MobileOdin in the device
e) Use MobileOdin to flash the .md5 you moved to it in step (c)
f) install TriangleAway (download from XDA) and run it to reset binary counter (which got incremented in step [a] )
Results: rooted, JB, stock, all settins retained, no binary counter increment
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
prawln said:
Simonetti2011 I have been searching the internet here in New Zealand and that has been the best answer I have found so far!
I do have a slight question thought. I live in New Zealand and have the GT-I9300T model of the GS3 and I'm wanting to install the international unbranded rom for that I can get updates faster (here in NZ it takes months and months to get updates)
I downloaded the International UK unbranded firmware 4.0.4 and was going to flash that rom onto my phone then upgrade to jelly bean via kies but have since relised I should just download the jellybean UK firmware straight away. Do you by any chance havea link to the firmware that I would need, I noticed there were a few different versions.
Also about the CSC, would I need to do any changes?
Many many thanks in advance, Sorry for hijacking this thread, just figured I was on the same pages as the OP
Click to expand...
Click to collapse
Thanks!
The 9300T and the 9300 are NOT the same device, therefore they use different firmware (ROM). The ROMs for the 9300T are here: http://samsung-updates.com/device/?id=GT-I9300T
I don't think there is a 9300T ROM for the UK, since the model released there is the 9300 (non-T).
It seems that either Samsung-updates hasn't indexed any ROMs for your model or they haven't been released.
About CSC: just don't worry about it... download and flash any ROM you want for your specific model and don't worry. If you don't like it, just download and flash another one.
Thanks heaps for that!
I actually just tried the UK unbranded rom that was for the i9300 on my i9300T and suprisingly everything seems to work ok so far (phone calls, txting, 3g etc)
Thankyou to everyone!
Thank you for your responses to my post regarding rooting my s3. They were very helpful. i succesfully rooted via chainfire cf auto root for the I9300 model without problem. Just one last question, I have been searching around a bit and some people are saying that flashing the jellybean firmware via odin, is not a perfect copy.. i mean some say they have been experiencing very minor problems here and there. So, if i update to the uk firmware on jelly bean via odin or mobile odin, and i experience some problems, can i still get the official ota update or jellybean 4.1 via kies when it is released? Thanks again for your help. Im pretty new to this android stuff
Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
sbi1 said:
Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
Click to expand...
Click to collapse
There is no version of the i9100 sold in the US. What you probably read about is someone who flashed firmware or a ROM for the i777 (or some other different variant model) to an i9100. The i777 is the variant sold by AT&T. The i9100 is sold internationally.
As long as you stick to flashing things meant for the i9100, you should be fine.
Also, make sure of the exact model. There is also the i9100G variant, which is incompatible to the i9100 in terms of firmwares, kernels, and ROMs.
Just be careful, and if you intend on flashing anything, only use things meant for that exact model phone.
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
sbi1 said:
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I don't believe you'll get any OTA updates on the i9100 while in the US. I haven't, in over a year. Besides, you can turn it off. (OTA)
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Click to expand...
Click to collapse
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Thank you both!
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
Click to expand...
Click to collapse
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
sbi1 said:
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
Click to expand...
Click to collapse
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Recoveryception bro
Not sure why I cannot find stock in sammobile.
ctomgee said:
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Click to expand...
Click to collapse
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
ctomgee said:
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Click to expand...
Click to collapse
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
sbi1 said:
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
Click to expand...
Click to collapse
Depends. A custom kernel like Siyah will do. I don't think OTA works on this phone in the States.
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
jaykresge said:
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
Click to expand...
Click to collapse
Well, at the end of the day I do want to root and maybe even install a custom rom (trying to convince my daughter that it's safe ). I did root and run Shostock on my I777, but I don't have any experience with the I9100.
I don't necessarily want the OTA update, I was just worried that if I try to update it (currently 4.0.3...not sure if there is a newer version at all), the OTA will put something that does not belong there. As I said, I read somewhere about Samsung US downloading US version that doesn't work with the I9100.
If you want to root and rom, this is the right place. If you or your daughter are more comfortable with a stock ROM, get Kies. It's not going to download the US firmware. Here's why.
-you plug it in and it detects the phone, literally saying, "Hey, I have an i9100 here, not an i-777!"
-It looks for your current firmware, literally saying, "Hmm, I see UK 4.0.3 here, let's see if there's more current UK firmware."
-It then finds the more current firmware for what is currently installed, "Egads! There's a 4.0.4 UK firmware!"
Anyway, there is in fact a more recent firmware for your device (4.0.4) and it contains numerous bug fixes. I'd recommend installing Kies and running that update. Then, if you haven't done much with the phone yet, factory reset it to clean out any left over garbage. It will give you a smooth experience. And for what it's worth, I've had no desire to root/rom my SGS2. On my Incredible, not only did I root/rom, but I had my own project (Liberation) that I ran on these very boards. With the SGS2, there's been no need for me to do that.
Some like the "pure google experince"
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
sbi1 said:
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
Click to expand...
Click to collapse
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
jaykresge said:
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
Click to expand...
Click to collapse
Thanks jaykresge. I am familiar with Odin. As I mentioned - my I777 is rooted. What I don't know though is how/where to get the correct UK firmware to replace the one I have and "UK'ing" the device