Im really scared. I have an atrix rooted and unlocked. I had neutrino 2.7gt on it and due to being buggy I chose to flash ee, but did so as an update. It worked but then I had to format my sd card and re flash the addons and when i did i got stuck in a bootloop. so i tried to get into android recovery mode and now I just have a blank screen please help me.
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
How do i do that
This exact same thing happened to me with the blank recovery screen and boot loop, what I did to fix it was wiping my recovery via fast boot then flashed neutrino2.7 again using rom racer. It turned out that notorious posted a bad link to the rom that resulted in this.
Sent from my MB860 using XDA
italosnt said:
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
Click to expand...
Click to collapse
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
LOL
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
CaelanT said:
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Don't forget to wipe all you can . You can find Stock SBF Versions and how to do it easily here
If you're not comfortable with rsd you can use fastboot as well.
Sent from my MB860 using xda premium
The same thing happened to me. I used fast boot and erased the recovery in fast boot and then fast boot flashed cwm recovery using the zip. File from their website
I used the instructions from the second post on this thread.
http://forum.xda-developers.com/showthread.php?t=1564363
Sent from my MB860 using XDA
italosnt said:
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
Click to expand...
Click to collapse
Sass86 said:
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
CaelanT said:
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
Click to expand...
Click to collapse
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Sass86 said:
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
CaelanT said:
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I said: "Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution"
You said: "Do not flash SBF after unlock"
It's a bad advice, i know it. Do you see another way to solve it? Or do you prefer a phone soft bricked than try to solve it? If there is a better way to do.. i don't know it, so tell me. Sorry but we're trying to help him/her, he/she doesn't know what to do. Please stop say you're right or wrong, that i'm right or wrong... it doesn't matter . Please post a solution, we will thank you
Related
So,just got my atrix and it is already on 1.8.3. Does that mean I should go ahead,unlock bootloader,root,flash cwm, then 2.3.4?
Sent from my MB860 using XDA Premium App
I definitely would recommend rooting it and installing Cupcake. I just got a MyTouch 4G a couple of weeks ago and I can't wait to root it (I just haven't had time yet). I'm so sick of all the crap that T-Mobile put on it. In addition, I think that's the key to getting better battery life out of it (though this is my first Android device so I'm not sure about that yet).
You can it all depends on what you want i wouldnt unlock it unless you are more
than just a normal user or it really wont mean much to you unless you like flashing.
Xenocyde said:
You can it all depends on what you want i wouldnt unlock it unless you are more
than just a normal user or it really wont mean much to you unless you like flashing.
Click to expand...
Click to collapse
Im way more than a normal user lol. And plus I want the newer moto launched. So,its safe to proceed with that proccess?
Sent from my MB860 using XDA Premium App
Yes , prior to doing ANY thing I would reflash 1.2.6 ota to 1.8.3
Then RSD pudding ( unlock for atrix )
Then install CWM ( Clock work mod )
then install Kenneth Beta #4 rom for gingerbread with is a stock rom with
root and a dedoxed system ( faster ).
Now I have seen some pple that had issues with using RSD , And Fastboot
its simple just read ,read and read.
post if you need helping installing anything i will see if i can type you though it
There are two fastboots use the right fastboot for the right files
one is for bigger files which is moto-fastboot and
the other is for smaller files which is fastboot.
ONLY use RSD for a RADIO AND OR The pudding file
once you have CWM please use it.
READ WARNINGS ON USING RSD.
Links
UNLOCK
http://forum.xda-developers.com/showthread.php?t=1136261
CWM
http://forum.xda-developers.com/showthread.php?t=1138541
Gingerbread by kenneth
http://forum.xda-developers.com/showthread.php?t=1159385
Xenocyde said:
Yes , prior to doing ANY thing I would reflash 1.2.6 ota to 1.8.3
Then RSD pudding ( unlock for atrix )
Then install CWM ( Clock work mod )
then install Kenneth Beta #4 rom for gingerbread with is a stock rom with
root and a dedoxed system ( faster ).
Now I have seen some pple that had issues with using RSD , And Fastboot
its simple just read ,read and read.
post if you need helping installing anything i will see if i can type you though it
Click to expand...
Click to collapse
Im already on 1.8.3 though
Sent from my MB860 using XDA Premium App
You can still flash the unlock now but I like to be safe and start out on a FRESH
start so you dont start having issues.
Sometimes NOT always you get small problems because of a past OS
that had stuff on it. FLashing back to the start and starting over insures you wont
have issues ( at lease you you can prevent )
Try flashing the unlock and then cwm then the new build it may work but
if you are having issues with something you may have to go though the whole
process again trying to save you a head ake.
you ask around or even look around alot safer starting from a fresh start
p.s. I am warning you because of my issues i had we live and learn sharing the smarts!
Xenocyde said:
You can still flash the unlock now but I like to be safe and start out on a FRESH
start so you dont start having issues.
Sometimes NOT always you get small problems because of a past OS
that had stuff on it. FLashing back to the start and starting over insures you wont
have issues ( at lease you you can prevent )
Try flashing the unlock and then cwm then the new build it may work but
if you are having issues with something you may have to go though the whole
process again trying to save you a head ake.
you ask around or even look around alot safer starting from a fresh start
p.s. I am warning you because of my issues i had we live and learn sharing the smarts!
Click to expand...
Click to collapse
Lol ok ill start fresh. But can you give me a link to unlock the bootloader? Ive seen too many threads on it
Sent from my MB860 using XDA Premium App
Just be safe and don't use sbf's after the unlock and stick with fruitcakes (posted in the dev section)
Sent from my MB860 using Tapatalk
BBock9 said:
Just be safe and don't use sbf's after the unlock and stick with fruitcakes (posted in the dev section)
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Yes good advise dont use RSD after gingerbread unless installing a radio
And I did give you a link to all three
look in post above bud. but just for you!
Links
UNLOCK
http://forum.xda-developers.com/show....php?t=1136261
CWM
http://forum.xda-developers.com/show....php?t=1138541
Gingerbread by kenneth
http://forum.xda-developers.com/show....php?t=1159385
OK so I'm stuck on some messed up 2.3.4 build. How can I get back to, 1.8.3 safely?
Sent from my MB860 using XDA Premium App
Use cwm and flash a fruitcake to it check in dev section. They have a 1.8.3 flushable zip that is safe.
Again read read and reread before flashing anything
Sent from my MB860 using XDA Premium App
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
First of all post in right section or everyone is gonna be pissed!
Sent from my MB860 using XDA Premium App
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
doesnt belong in the dev thread but anyway i would rsd back just to make sure you have a clean install
TechnoNeto said:
doesnt belong in the dev thread but anyway i would rsd back just to make sure you have a clean install
Click to expand...
Click to collapse
Do not rsd!
Once you have tried ota, rsd-ing might lead to hard brick.
Please don't give random advises.
Post in q& a section and someone will be able To help you.
Sent from my MB860 using XDA Premium App
ceo.mtcl said:
First of all post in right section or everyone is gonna be pissed!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
lol be of some help or else youll just bump his tread!
ceo.mtcl said:
Do not rsd!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
why not hes not on gb yet hes still on stock
if u dont rsd plug your phone in and do it through the usb
random advices? your lucky i already recieved a warning from the mod
TechnoNeto said:
why not hes not on gb yet hes still on stock
Click to expand...
Click to collapse
He tried ota. You do not know if he updated and is stuck or not.
Sent from my MB860 using XDA Premium App
TechnoNeto said:
lol be of some help or else youll just bump his tread!
Click to expand...
Click to collapse
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
ceo.mtcl said:
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
well if he can boot into 4.1.83 then doing the rsd will be fine if hes in some sort of brick he may want to flash the gb sbf
Moving to Q & A section
Moving to the Q & A Section.
ceo.mtcl said:
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
once i run to the install, it will just run 3/1, and then stop, i need to put out the bettery and restart the cell phone, and it back to 1.83 OS, and it show a message:"fail to update" !!
PS: sorry to pst into wrong area, but i really want ot update to 4.5.91~!!
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
See this thread.
This should fix all of your issues.
http://forum.xda-developers.com/showthread.php?t=1138204
eeww said:
once i run to the install, it will just run 3/1, and then stop, i need to put out the bettery and restart the cell phone, and it back to 1.83 OS, and it show a message:"fail to update" !!
PS: sorry to pst into wrong area, but i really want ot update to 4.5.91~!!
Click to expand...
Click to collapse
well if you are certain you are on 4.1.83 try putting the apk back if that doesnt work try using rsd to flash either the gb or stock sbf back if u want a rom from one of the devs i have a detailed guide(video) on how to do so
I can help, BUT FIRST I NEED TO KNOW.....
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
These are some need to know questions before I or anyone else can assist you in your problem.
1) What version are you on!??? 1.2.6, 1.5.7, 1.8.3, 2.3.4??
2) Have you ever unlocked your bootloader?? <---- THIS IS VERY IMPORTANT TO KNOW!!!
IF YOU HAVE UNLOCKED YOUR BOOTLOADER THEN FLASHING A .SBF WILL RESULT IN A HARDBRICK.
IF YOU HAVE NEVER UNLOCKED YOUR BOOTLOADER THEN THE ONLY WAY TO GET A FRESH INSTALL IS USING A .SBF
ClearFire said:
These are some need to know questions before I or anyone else can assist you in your problem.
1) What version are you on!??? 1.2.6, 1.5.7, 1.8.3, 2.3.4??
2) Have you ever unlocked your bootloader?? <---- THIS IS VERY IMPORTANT TO KNOW!!!
IF YOU HAVE UNLOCKED YOUR BOOTLOADER THEN FLASHING A .SBF WILL RESULT IN A HARDBRICK.
IF YOU HAVE NEVER UNLOCKED YOUR BOOTLOADER THEN THE ONLY WAY TO GET A FRESH INSTALL IS USING A .SBF
Click to expand...
Click to collapse
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
eeww said:
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Try flashing this:
http://forum.xda-developers.com/showthread.php?t=1182526
Make sure you have a FULL battery
ANSWER
eeww said:
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
OK well this is gonna be easy,
Flash the 1.2.6 ATT US found HERE and upgrade via WiFi updater to 1.5.7 then 1.8.3 then to 2.3.4.
To use RSDlite (or for further details look HERE);
Charge to FULL battery <---- IMPORTANT
Start up the RSDlite program
Turn off phone, Remove SD-card, Remove SIM card and turn back on holding the power button and volume up key until it says "Starting RSD protocol support"
Plug your phone into the usb port and RSDlite should say "Status: Connected…"
Load the 1.2.6 SBF in the RSD and click start.
May take from 5-10 minutes Do NOT pull battery during this time or unplug until it says 100% complete
If you have any other questions please ask here or shoot me a message. Happy Flashing!!
Thx all of you guys, i will try it tonight(in hong kong right [email protected]@so hot!) Hope will be success to 4.5.91!!
Sent from my MB860 using XDA Premium App
ClearFire said:
OK well this is gonna be easy,
Flash the 1.2.6 ATT US found HERE and upgrade via WiFi updater to 1.5.7 then 1.8.3 then to 2.3.4.
To use RSDlite (or for further details look HERE);
Charge to FULL battery <---- IMPORTANT
Start up the RSDlite program
Turn off phone, Remove SD-card, Remove SIM card and turn back on holding the power button and volume up key until it says "Starting RSD protocol support"
Plug your phone into the usb port and RSDlite should say "Status: Connected…"
Load the 1.2.6 SBF in the RSD and click start.
May take from 5-10 minutes Do NOT pull battery during this time or unplug until it says 100% complete
If you have any other questions please ask here or shoot me a message. Happy Flashing!!
Click to expand...
Click to collapse
its work~!!! thx a lot, but one more question if i only change the BOOTANIMATION, will it also effect the OTA can not be install??
Your Welcome!
eeww said:
its work~!!! thx a lot, but one more question if i only change the BOOTANIMATION, will it also effect the OTA can not be install??
Click to expand...
Click to collapse
That I cannot be a 100% on as I used to install a fresh SBF before an upgrade. But now that we have custom ROM's I do not worry about those things anymore
I would assume yes, just to be on the safe side, and if you do change the boot animation just backup the original so if you do have problems upgrading OTA then you can simply put it back.
Don't forget to hit the Thanks button!
I had an atrix that was rooted. All was working well with the stock rom running (Bell). It then rebooted itself all of the sudden and now its stuck at the moto logo scree with the error "Boot error 2; starting RSD."
I did the research and tried the hard reset (power and vol. down). Tried to do the Motorola update but it doesn't connect to any computer via its usb. Tried putting the appropriate .zip on a micro sd. PLEASE HELP
Try the pudding.
I voided my warranty and your mum.
anyone?????
pukemon said:
Try the pudding.
I voided my warranty and your mum.
Click to expand...
Click to collapse
This.
10char
Do you have any recovery installed? And check the pudding thread that may be can be helpful
This happened to me when i tried to install CWM using rom manager when i didnt have my bootloader unlocked. You can flash the SBF and restore that way. Or you can flash the pudding zip using rsd lite and it will return you to stock but w/ easy set up for root and unlocking bootloader. Pudding is really easy. Check out the thread. Basically just download the file and flash it using RSD lite. Problem will be solved.
I fixed it the long way. Telstra SBF flash then unlock and away I went. Still can't install gobstopper said bad file regardless of how many times I have download it.
Sent from my GT-I9100 using xda premium
I've been having the same problem on alien and homebase. Should I do a complete wipe? Where to start? Sorry for the noobnish, i've been gone for a while and don't want to fubar my phone.
Sent from my MB860 using XDA App
I couldn't even get into recovery. I just flashed tge sbf. I had no other option I could figure out. Try pudding first.
Sent from my GT-I9100 using xda premium
I get the message failed to boot 0x1000 Entering NVFLASH RECOVERY MODE.
I had installed Cyanogen Mod 2.3.4 and didn't like it at all and tried to flash the sbf to 2.3.3 . Now that I am reading it seems like a dumb move.
This message comes up when I turn it on and disappears quickly to remain at a black screen.
Is there anything I can do?
ghostdog662 said:
I get the message failed to boot 0x1000 Entering NVFLASH RECOVERY MODE.
I had installed Cyanogen Mod 2.3.4 and didn't like it at all and tried to flash the sbf to 2.3.3 . Now that I am reading it seems like a dumb move.
This message comes up when I turn it on and disappears quickly to remain at a black screen.
Is there anything I can do?
Click to expand...
Click to collapse
Yes, it was a dumb move. You should have read all the warnings that said NOT to sbf flash after bootloader unlock.
Anyway, now you need to SBF flash 2.3.4 with pudding and you should be good to go.
How can I flash sbf 2.3.4 if RSD Lite doesn't show anything? Or should I be using a different program like fastboot?
Do I just redownload the 2.3.4 cyanogen and install with the program you suggest? I am unsure how this will work because the computer doesn't beep or anything like that when I connect it.
Thanks for your help.
We don't have the program to nvflash our devices. You can try to get motorola to replace it but but otherwise i believe you're screwed
Sent from my MB860 using xda premium
So which is it ?
ghostdog662 said:
So which is it ?
Click to expand...
Click to collapse
the only two sbf's that are safe to flash for people who installed the OTA update to gingerbread is the 2.3.4 sbf and the pudding sbf.
any others have the possibility of hard bricking your device, and nvidia hasn't released the nvflash program; therefor we're stuck at this step. no way to recovery from it.
What about these people I read about hacking up a usb cable ?
ghostdog662 said:
What about these people I read about hacking up a usb cable ?
Click to expand...
Click to collapse
That is to rsd flash without a battery, in case you flash when your battery is too low and the phone dies mid flash
Sent from my MB860 using xda premium
I have another battery that I can use and a friend has an Atrix I can stick the battery in to charge up. Does that improve the chances?
ghostdog662 said:
I have another battery that I can use and a friend has an Atrix I can stick the battery in to charge up. Does that improve the chances?
Click to expand...
Click to collapse
We don't have the program to NVflash an atrix. If you can get into rsdlite mode to flash an sbf you can fix it, but if
nvflash is your only option then you are hard bricked
Sent from my MB860 using xda premium
So what are people doing these days withe effed Atrix's?
ghostdog662 said:
So what are people doing these days withe effed Atrix's?
Click to expand...
Click to collapse
Using then for spare parts I'd guess
Sent from my MB860 using xda premium
I guess I'll try my luck with Motorola.
I sent my phone in for repair and they sent me a new one. Took the full 7 working days after they received it but I am happy. No more rooting / messing with this until nvflash is working.
ghostdog662 said:
I sent my phone in for repair and they sent me a new one. Took the full 7 working days after they received it but I am happy. No more rooting / messing with this until nvflash is working.
Click to expand...
Click to collapse
Nvflash may never be released...
Rooting should never give you any problems. Unlocking the bootloader and putting on a custom rom just requires some reading and more reading beforehand but isn't too hard if you follow the instructions.
Hi,
Could someone please help me? I'm trying to get back to full stock (well as close to it as possible) to either eliminate my problem or send back under warranty...my problem is detailed in this thread here: http://forum.xda-developers.com/showthread.php?t=1500220&page=3# ...basically my Atrix just will mot stop randomly rebooting/locking up with the screen off (needing a batter pull).
I have tried running RSDLite 5.6 in exactly the same way I unlocked the bootloader but nothing seemed to happen...RSDLite went all the way to 100% but all my phone did was reboot normally. Weird thing was, I didn't get a reboot for nearly 24 hours....and then they started again, quite regularly. Did I do something wrong? I though that SBFing it through RSD would just reflash completely back to stock.
Also, in case I cannot get rid of this REALLY annoying problem, I want to hide the 'unlocked' text at boot ...how would I go about doing that?
Thanks,
Mark
Anyone?
Sent from my MB860 using XDA App
Are you using the correct SBF file?
markdjj said:
Anyone?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
How could I tell? I have the IHOP _Bell file and the SBF file is just titled SBF_Flash
It worked a couple of months ago when I unlocked the bootloader
If you're trying to go back to stock then you have to find the official SBF. It sounds like you're using the same files that you used to unlock it in the first place.
markdjj said:
How could I tell? I have the IHOP _Bell file and the SBF file is just titled SBF_Flash
It worked a couple of months ago when I unlocked the bootloader
Click to expand...
Click to collapse
Use a Fruitcake or you will brick
Sent from my MB860 using xda premium
Please don't spread misinformation. Using RSD does not automatically result in a brick. I have used it numerous times flashing Official (AT&T) SBF builds and I am still using the same phone.
With that said, it is not recommended to use RSD (which I agree) but it can be used with caution and some knowledge/research in tow.
One precaution, do not flash previous builds (SBF).
dragoncius said:
Use a Fruitcake or you will brick
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Ok, thanks for the info, just come back to this after being away...I have done a bit of research on fruitcake but I haven't been able to find too much...where can I find the latest?