Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
First of all post in right section or everyone is gonna be pissed!
Sent from my MB860 using XDA Premium App
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
doesnt belong in the dev thread but anyway i would rsd back just to make sure you have a clean install
TechnoNeto said:
doesnt belong in the dev thread but anyway i would rsd back just to make sure you have a clean install
Click to expand...
Click to collapse
Do not rsd!
Once you have tried ota, rsd-ing might lead to hard brick.
Please don't give random advises.
Post in q& a section and someone will be able To help you.
Sent from my MB860 using XDA Premium App
ceo.mtcl said:
First of all post in right section or everyone is gonna be pissed!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
lol be of some help or else youll just bump his tread!
ceo.mtcl said:
Do not rsd!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
why not hes not on gb yet hes still on stock
if u dont rsd plug your phone in and do it through the usb
random advices? your lucky i already recieved a warning from the mod
TechnoNeto said:
why not hes not on gb yet hes still on stock
Click to expand...
Click to collapse
He tried ota. You do not know if he updated and is stuck or not.
Sent from my MB860 using XDA Premium App
TechnoNeto said:
lol be of some help or else youll just bump his tread!
Click to expand...
Click to collapse
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
ceo.mtcl said:
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
well if he can boot into 4.1.83 then doing the rsd will be fine if hes in some sort of brick he may want to flash the gb sbf
Moving to Q & A section
Moving to the Q & A Section.
ceo.mtcl said:
I'm trying to help. But you are trying to brick his phone mate!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
once i run to the install, it will just run 3/1, and then stop, i need to put out the bettery and restart the cell phone, and it back to 1.83 OS, and it show a message:"fail to update" !!
PS: sorry to pst into wrong area, but i really want ot update to 4.5.91~!!
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
See this thread.
This should fix all of your issues.
http://forum.xda-developers.com/showthread.php?t=1138204
eeww said:
once i run to the install, it will just run 3/1, and then stop, i need to put out the bettery and restart the cell phone, and it back to 1.83 OS, and it show a message:"fail to update" !!
PS: sorry to pst into wrong area, but i really want ot update to 4.5.91~!!
Click to expand...
Click to collapse
well if you are certain you are on 4.1.83 try putting the apk back if that doesnt work try using rsd to flash either the gb or stock sbf back if u want a rom from one of the devs i have a detailed guide(video) on how to do so
I can help, BUT FIRST I NEED TO KNOW.....
eeww said:
Because i had chage the system Documents(OlympusCamera.apk), now, i still can get the OTA message that update to 4.5.91, but after i finish the download, and run the install, it fail~!!!!
what should i do???
do i need to use RSD to reinstall the 1.83???
or i just recover the original 1.83 OlympusCamera.apk??? if so, can someone give me the original 1.83 OlympusCamera.apk???
Click to expand...
Click to collapse
These are some need to know questions before I or anyone else can assist you in your problem.
1) What version are you on!??? 1.2.6, 1.5.7, 1.8.3, 2.3.4??
2) Have you ever unlocked your bootloader?? <---- THIS IS VERY IMPORTANT TO KNOW!!!
IF YOU HAVE UNLOCKED YOUR BOOTLOADER THEN FLASHING A .SBF WILL RESULT IN A HARDBRICK.
IF YOU HAVE NEVER UNLOCKED YOUR BOOTLOADER THEN THE ONLY WAY TO GET A FRESH INSTALL IS USING A .SBF
ClearFire said:
These are some need to know questions before I or anyone else can assist you in your problem.
1) What version are you on!??? 1.2.6, 1.5.7, 1.8.3, 2.3.4??
2) Have you ever unlocked your bootloader?? <---- THIS IS VERY IMPORTANT TO KNOW!!!
IF YOU HAVE UNLOCKED YOUR BOOTLOADER THEN FLASHING A .SBF WILL RESULT IN A HARDBRICK.
IF YOU HAVE NEVER UNLOCKED YOUR BOOTLOADER THEN THE ONLY WAY TO GET A FRESH INSTALL IS USING A .SBF
Click to expand...
Click to collapse
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
eeww said:
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Try flashing this:
http://forum.xda-developers.com/showthread.php?t=1182526
Make sure you have a FULL battery
ANSWER
eeww said:
I haven't unlock my atrix before, and my atrix is 1.83 OS,i have try to use the RSD to flash the att 1.83.sbf brfore, but it keep said fail!!
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
OK well this is gonna be easy,
Flash the 1.2.6 ATT US found HERE and upgrade via WiFi updater to 1.5.7 then 1.8.3 then to 2.3.4.
To use RSDlite (or for further details look HERE);
Charge to FULL battery <---- IMPORTANT
Start up the RSDlite program
Turn off phone, Remove SD-card, Remove SIM card and turn back on holding the power button and volume up key until it says "Starting RSD protocol support"
Plug your phone into the usb port and RSDlite should say "Status: Connected…"
Load the 1.2.6 SBF in the RSD and click start.
May take from 5-10 minutes Do NOT pull battery during this time or unplug until it says 100% complete
If you have any other questions please ask here or shoot me a message. Happy Flashing!!
Thx all of you guys, i will try it tonight(in hong kong right [email protected]@so hot!) Hope will be success to 4.5.91!!
Sent from my MB860 using XDA Premium App
ClearFire said:
OK well this is gonna be easy,
Flash the 1.2.6 ATT US found HERE and upgrade via WiFi updater to 1.5.7 then 1.8.3 then to 2.3.4.
To use RSDlite (or for further details look HERE);
Charge to FULL battery <---- IMPORTANT
Start up the RSDlite program
Turn off phone, Remove SD-card, Remove SIM card and turn back on holding the power button and volume up key until it says "Starting RSD protocol support"
Plug your phone into the usb port and RSDlite should say "Status: Connected…"
Load the 1.2.6 SBF in the RSD and click start.
May take from 5-10 minutes Do NOT pull battery during this time or unplug until it says 100% complete
If you have any other questions please ask here or shoot me a message. Happy Flashing!!
Click to expand...
Click to collapse
its work~!!! thx a lot, but one more question if i only change the BOOTANIMATION, will it also effect the OTA can not be install??
Your Welcome!
eeww said:
its work~!!! thx a lot, but one more question if i only change the BOOTANIMATION, will it also effect the OTA can not be install??
Click to expand...
Click to collapse
That I cannot be a 100% on as I used to install a fresh SBF before an upgrade. But now that we have custom ROM's I do not worry about those things anymore
I would assume yes, just to be on the safe side, and if you do change the boot animation just backup the original so if you do have problems upgrading OTA then you can simply put it back.
Don't forget to hit the Thanks button!
Related
Hi guys;
I want to update my Atrix, but I don't know what path to take?
a) Through the OTA 4.5.91...
b) Unlocking the bootloader, and then upgrading to GingerBread via Custom Roms...
I really need your help, because I am a newby in this whole area...
Right now I am runnig:
4.1.57 ATT
Android Version: 2.2.1
Build Number: GingerBlur 2.5
Your still on 57?
Sent from my MB860 using XDA App
yeah I am on 4.1.57
Why don't you at least update to 1.83. We've ben on .83 for months now.
Sent from my MB860 using XDA App
And what then?
artemalek said:
And what then?
Click to expand...
Click to collapse
Depends what you want to do with your phone. If you like testing out custom roms and stuff then go the way of unlocking the bootloader and flashing one of the custom GB roms. If you want a stock phone with some minor root modifications then flash ota and root. Just beaware if you do the ota build you cannot flash back to froyo (not sure why anyone would but just to warn you)
Sent from my MB860
can you refeer me to the posts where I can unlock the BL and then install a custom Rom
Yeah I am on 4.1.83 and Android 2.2.2.
I want to upgrade as well. Everything is stock currently.
I want to be able to do Cynogen later so I think I need to unlock and flash a custom rom.
So I am like the op and need to know where to go. There is so much argument and misinformation on this forum my head hurts. Just read for an hour and am more confused.
All I know is i dont want to do the OTA update lol!
HOwever I downloaded it already and my phone keeps asking me to install it...
DOes anyone know how to remove that?
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Sinful Animosity said:
Well, first, I suggest you do NOT flash the OTA update.
I recommend that you use the Pudding file in the Development sub-forum to unlock your device. There are video and text guides floating around how to unlock.
If you're not wanting to try out any ROMs yet, I suggest Kenneth's ROM. It's the OTA update, except without the risk of hard bricking if you ever need to flash down.
If you are all feeling adventurous, you could flash an Overclock kernel (I recommend Faux's 1.1GHz OC). You can also flash Ninja ROM v0.4.5. It's super fast.
@mercilus if you freeze the FOTA app in Titanium Backup, I think that stops it.
Here's the guide: http://forum.xda-developers.com/show....php?t=1167373
@artemalek I see that you're on 1.5.7, that means you have an AT&T branded device. You'll need to flash the AT&T version of Pudding for your unlock.
Click to expand...
Click to collapse
Your link seems to be broken. Thanks for the recommendations on roms!
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
mercilus said:
Your link seems to be broken. Thanks for the recommendations on roms!
Click to expand...
Click to collapse
D'oh! Will fix that immediately! Thanks for that!
artemalek said:
@Sinful
I have it rooted... Can you give me step by step guide! Do I need first to upgrade to 4.1.83 or I can do it from 4.1.57???
Click to expand...
Click to collapse
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Sinful Animosity said:
Here's a video: http://www.youtube.com/watch?v=H02N4p9vEg0
Here's a text guide: http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
It doesn't matter about the Firmware version. The guy in the video is on 1.5.7 and unlocks it.
Click to expand...
Click to collapse
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
mercilus said:
On the text version, the directions say "RSD Lite 5.3.1 or sbf_flash [Download if Atrix is Froyo]"
Im on 2.2.2 so that means I should use sbf flash instead of rsd?
Click to expand...
Click to collapse
RSD is fine. I think sbf flash is for Linux.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
RSD is fine. I think sbf flash is for Linux.
Click to expand...
Click to collapse
I just followed the directions and RSD said it failed and gave me an error. I accidently hit show phone and it erased the error message but it was something about error at restarting.
Now my phone wont turn on? When I hit the power button/hold it all I get is blank screen.
It doesnt try to turn on or anything?
Did i mess up the phone permanently? crap... just what i was trying to avoid..
any advice?
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Sinful Animosity said:
How full was your battery? And if your phone was hard bricked, you'd be seeing an error.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Battery was at like 80% when I last looked. So it was more when I started, and I did not leave the phone watched the whole process up til the point where it wont turn on anymore. So I doubt it lost all that battery in that brief 5 minute time.
Its been plugged in since still and no response from power button.
Everything was completely stock when I started.
Update: I just noticed when I take out my battery and plug in the charger I do get a green light as long as battery is out. When I put it in and plug in I get no lights. Not sure if thats helpful or means anything... (Just noticed its only with the USB charger I get the green light and not AC charger. The battery must be out)
I get the message failed to boot 0x1000 Entering NVFLASH RECOVERY MODE.
I had installed Cyanogen Mod 2.3.4 and didn't like it at all and tried to flash the sbf to 2.3.3 . Now that I am reading it seems like a dumb move.
This message comes up when I turn it on and disappears quickly to remain at a black screen.
Is there anything I can do?
ghostdog662 said:
I get the message failed to boot 0x1000 Entering NVFLASH RECOVERY MODE.
I had installed Cyanogen Mod 2.3.4 and didn't like it at all and tried to flash the sbf to 2.3.3 . Now that I am reading it seems like a dumb move.
This message comes up when I turn it on and disappears quickly to remain at a black screen.
Is there anything I can do?
Click to expand...
Click to collapse
Yes, it was a dumb move. You should have read all the warnings that said NOT to sbf flash after bootloader unlock.
Anyway, now you need to SBF flash 2.3.4 with pudding and you should be good to go.
How can I flash sbf 2.3.4 if RSD Lite doesn't show anything? Or should I be using a different program like fastboot?
Do I just redownload the 2.3.4 cyanogen and install with the program you suggest? I am unsure how this will work because the computer doesn't beep or anything like that when I connect it.
Thanks for your help.
We don't have the program to nvflash our devices. You can try to get motorola to replace it but but otherwise i believe you're screwed
Sent from my MB860 using xda premium
So which is it ?
ghostdog662 said:
So which is it ?
Click to expand...
Click to collapse
the only two sbf's that are safe to flash for people who installed the OTA update to gingerbread is the 2.3.4 sbf and the pudding sbf.
any others have the possibility of hard bricking your device, and nvidia hasn't released the nvflash program; therefor we're stuck at this step. no way to recovery from it.
What about these people I read about hacking up a usb cable ?
ghostdog662 said:
What about these people I read about hacking up a usb cable ?
Click to expand...
Click to collapse
That is to rsd flash without a battery, in case you flash when your battery is too low and the phone dies mid flash
Sent from my MB860 using xda premium
I have another battery that I can use and a friend has an Atrix I can stick the battery in to charge up. Does that improve the chances?
ghostdog662 said:
I have another battery that I can use and a friend has an Atrix I can stick the battery in to charge up. Does that improve the chances?
Click to expand...
Click to collapse
We don't have the program to NVflash an atrix. If you can get into rsdlite mode to flash an sbf you can fix it, but if
nvflash is your only option then you are hard bricked
Sent from my MB860 using xda premium
So what are people doing these days withe effed Atrix's?
ghostdog662 said:
So what are people doing these days withe effed Atrix's?
Click to expand...
Click to collapse
Using then for spare parts I'd guess
Sent from my MB860 using xda premium
I guess I'll try my luck with Motorola.
I sent my phone in for repair and they sent me a new one. Took the full 7 working days after they received it but I am happy. No more rooting / messing with this until nvflash is working.
ghostdog662 said:
I sent my phone in for repair and they sent me a new one. Took the full 7 working days after they received it but I am happy. No more rooting / messing with this until nvflash is working.
Click to expand...
Click to collapse
Nvflash may never be released...
Rooting should never give you any problems. Unlocking the bootloader and putting on a custom rom just requires some reading and more reading beforehand but isn't too hard if you follow the instructions.
Hi,
Could someone please help me? I'm trying to get back to full stock (well as close to it as possible) to either eliminate my problem or send back under warranty...my problem is detailed in this thread here: http://forum.xda-developers.com/showthread.php?t=1500220&page=3# ...basically my Atrix just will mot stop randomly rebooting/locking up with the screen off (needing a batter pull).
I have tried running RSDLite 5.6 in exactly the same way I unlocked the bootloader but nothing seemed to happen...RSDLite went all the way to 100% but all my phone did was reboot normally. Weird thing was, I didn't get a reboot for nearly 24 hours....and then they started again, quite regularly. Did I do something wrong? I though that SBFing it through RSD would just reflash completely back to stock.
Also, in case I cannot get rid of this REALLY annoying problem, I want to hide the 'unlocked' text at boot ...how would I go about doing that?
Thanks,
Mark
Anyone?
Sent from my MB860 using XDA App
Are you using the correct SBF file?
markdjj said:
Anyone?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
How could I tell? I have the IHOP _Bell file and the SBF file is just titled SBF_Flash
It worked a couple of months ago when I unlocked the bootloader
If you're trying to go back to stock then you have to find the official SBF. It sounds like you're using the same files that you used to unlock it in the first place.
markdjj said:
How could I tell? I have the IHOP _Bell file and the SBF file is just titled SBF_Flash
It worked a couple of months ago when I unlocked the bootloader
Click to expand...
Click to collapse
Use a Fruitcake or you will brick
Sent from my MB860 using xda premium
Please don't spread misinformation. Using RSD does not automatically result in a brick. I have used it numerous times flashing Official (AT&T) SBF builds and I am still using the same phone.
With that said, it is not recommended to use RSD (which I agree) but it can be used with caution and some knowledge/research in tow.
One precaution, do not flash previous builds (SBF).
dragoncius said:
Use a Fruitcake or you will brick
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Ok, thanks for the info, just come back to this after being away...I have done a bit of research on fruitcake but I haven't been able to find too much...where can I find the latest?
Im really scared. I have an atrix rooted and unlocked. I had neutrino 2.7gt on it and due to being buggy I chose to flash ee, but did so as an update. It worked but then I had to format my sd card and re flash the addons and when i did i got stuck in a bootloop. so i tried to get into android recovery mode and now I just have a blank screen please help me.
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
How do i do that
This exact same thing happened to me with the blank recovery screen and boot loop, what I did to fix it was wiping my recovery via fast boot then flashed neutrino2.7 again using rom racer. It turned out that notorious posted a bad link to the rom that resulted in this.
Sent from my MB860 using XDA
italosnt said:
Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution. Tell me when you do it
Click to expand...
Click to collapse
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
LOL
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
CaelanT said:
Do not flash SBF after unlock. Ignore this post and 'unthank'!
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Don't forget to wipe all you can . You can find Stock SBF Versions and how to do it easily here
If you're not comfortable with rsd you can use fastboot as well.
Sent from my MB860 using xda premium
The same thing happened to me. I used fast boot and erased the recovery in fast boot and then fast boot flashed cwm recovery using the zip. File from their website
I used the instructions from the second post on this thread.
http://forum.xda-developers.com/showthread.php?t=1564363
Sent from my MB860 using XDA
italosnt said:
Of course you can flash a sbf after unlock. I got this SAME problem. Solved it flashing a SBF rom and got that problem that don't recognize soft buttons. Solved this new one with a fix found here, at XDA Forum!
Click to expand...
Click to collapse
Sass86 said:
Its recommended not to sbf flash, but seeing as you offered no alternative method, perhaps you should delete your post. I also have used sbf flash to recover from a soft brick and confirm it works. You will need the last firmware you use for stock.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
CaelanT said:
Both of you:
Just because you flashed a SBF after unlock and didn't hard brick does not mean it's OK to do it. There are warnings all over the forums about flashing a SBF after unlock. You should NOT flash a SBF, plain and simple.
I won't delete my post. My post stands, The post prior to it recommends flashing a SBF. I need offer no alternative to tell the OP that this is bad advice!
Click to expand...
Click to collapse
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Sass86 said:
Warnings against unlocking bootloaders.. did you stop at those warnings? Warnings about flashing custom ROMs, did you heed to those warnings as well? The only reason they SUGGESTED not to use rsd is because it runs the most risk! Your phone loses connection from your computer, you get hard bricked. Phone loses power during flash, hard bricked. Cwm is the quickest and safest (as is fastbooting) but doesn't mean you can't use rsd. Stop being a troll.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
CaelanT said:
I never said you can't use a SBF! They didn't suggest it is bad advice, I did! You basically agreed with me, so what's your point?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I said: "Try flash a SBF Rom via RSD Lite. Take care, you must be careful. This is not a hard brick, so there is a solution"
You said: "Do not flash SBF after unlock"
It's a bad advice, i know it. Do you see another way to solve it? Or do you prefer a phone soft bricked than try to solve it? If there is a better way to do.. i don't know it, so tell me. Sorry but we're trying to help him/her, he/she doesn't know what to do. Please stop say you're right or wrong, that i'm right or wrong... it doesn't matter . Please post a solution, we will thank you
hey everyone. i want to use my nandroid back that i've made before I flashed cm10.1 to use my providers warrenty. If I restore from the nandroid backup it should work? no chances to get hard brick?
hezided said:
hey everyone. i want to use my nandroid back that i've made before I flashed cm10.1 to use my providers warrenty. If I restore from the nandroid backup it should work? no chances to get hard brick?
Click to expand...
Click to collapse
A nandroid backup is not an sbf file. Hard bricks come from flashing the wrong sbf file.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
A nandroid backup is not an sbf file. Hard bricks come from flashing the wrong sbf file.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ok thankks. and there is a way to lock the bootloader? or th least hide the mark that the bootloader is unlocker?
hezided said:
ok thankks. and there is a way to lock the bootloader? or th least hide the mark that the bootloader is unlocker?
Click to expand...
Click to collapse
flash the sbf file that matches the stock version you had prior to unlocking
Sent from my MB860 using xda app-developers app
palmbeach05 said:
flash the sbf file that matches the stock version you had prior to unlocking
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
where can i find it and how exactly I flash it?
and theres no fear of flashing sbf elder version to get a hard brick?
hezided said:
where can i find it and how exactly I flash it?
and theres no fear of flashing sbf elder version to get a hard brick?
Click to expand...
Click to collapse
if you flash the sbf that matches the stock version you had prior to unlocking, you'll be fine. flash anything older than that, and you risk bricking.
standby for sbf link. will edit this post with link in a min or two
http://www.das8nt.com/downloads.html
http://forum.xda-developers.com/showthread.php?t=1125944
Sent from my MB860 using xda app-developers app
palmbeach05 said:
if you flash the sbf that matches the stock version you had prior to unlocking, you'll be fine. flash anything older than that, and you risk bricking.
standby for sbf link. will edit this post with link in a min or two
http://www.das8nt.com/downloads.html
http://forum.xda-developers.com/showthread.php?t=1125944
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
thanks again I have found my version and i am downloading it right now. but how to flash it? I need to enter rsd mode in my phone and through rsd lte? I've downloaded an gz file type. and inside it has ths sbf file, and RSD lite can use both types. I know that it sounds like stupid question but I only want to verify, I need to use the sbf file and not the gz right?
hezided said:
thanks again I have found my version and i am downloading it right now. but how to flash it? I need to enter rsd mode in my phone and through rsd lte?
Click to expand...
Click to collapse
No problem. Search for RSD online, i'm running 5.7, but i think i was told by another user the other day that its up to 6.1 or something. reboot phone and hold vol up. it will display something about standing by for rsd support. connect phone to computer, let any necessary drivers install from device. then load sbf file into rsd, and after the drivers have installed, hit the detect for device button, and then flash the sbf to the device
Sent from my MB860 using xda app-developers app
palmbeach05 said:
No problem. Search for RSD online, i'm running 5.7, but i think i was told by another user the other day that its up to 6.1 or something. reboot phone and hold vol up. it will display something about standing by for rsd support. connect phone to computer, let any necessary drivers install from device. then load sbf file into rsd, and after the drivers have installed, hit the detect for device button, and then flash the sbf to the device
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I have the RSD lite from my previous installation, shouldnt it be enough? or like you said i need rsd online?
hezided said:
I have the RSD lite from my previous installation, shouldnt it be enough? or like you said i need rsd online?
Click to expand...
Click to collapse
i meant go online and search for rsd lite. your current install should be fine, but if you want to upgrade it you can.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
i meant go online and search for rsd lite. your current install should be fine, but if you want to upgrade it you can.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
ok great thank you very much!
hezided said:
ok great thank you very much!
Click to expand...
Click to collapse
no problem. one more thing. you may get an error message when you do it. if you flashed a different radio to your device, you need to follow the following steps first
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot. 2. Power on phone and select fastboot 3. execute: fastboot flash radio bp.img, Where bp.img baseband image files 4. execute: fastboot reboot 5. Phone automatically boot on the android recovery mode 6. Wipe userdata/cache 7. Reload in RSD mode 8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
no problem. one more thing. you may get an error message when you do it. if you flashed a different radio to your device, you need to follow the following steps first
Solved !
1. Copy Radio image (baseband) to the folder where located fastboot. 2. Power on phone and select fastboot 3. execute: fastboot flash radio bp.img, Where bp.img baseband image files 4. execute: fastboot reboot 5. Phone automatically boot on the android recovery mode 6. Wipe userdata/cache 7. Reload in RSD mode 8. on the RSD lite browse appropriate .sbf file and puch Start
Thats all.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
where can i get this radio image?
OK, did you at least try looking for it on your own?
hezided said:
where can i get this radio image?
Click to expand...
Click to collapse
http://www.mediafire.com/?q83792uk2f895
it has a list of the common radio.img files from when the sbfs were first out
Sent from my MB860 using xda app-developers app
ravilov said:
OK, did you at least try looking for it on your own?
Click to expand...
Click to collapse
"Radio image (baseband" I dont even know what it is and if it suppose to match to my version or anything
hezided said:
"Radio image (baseband" I dont even know what it is and if it suppose to match to my version or anything
Click to expand...
Click to collapse
radio.img=baseband what carrier do you have?
Sent from my MB860 using xda app-developers app
orange IL
Yes, and you won't know until you start doing your own research.
hezided said:
orange IL
Click to expand...
Click to collapse
this looks to be the one for orange
Sent from my MB860 using xda app-developers app