Everytime I'm playing a game and my hand covers the sensor, the display turns off. This is extremely irritating and only a reboot fixes the issue. Is there any solution to this?
cheekrox said:
Everytime I'm playing a game and my hand covers the sensor, the display turns off. This is extremely irritating and only a reboot fixes the issue. Is there any solution to this?
Click to expand...
Click to collapse
settings>display>in pocket detection
uncheck it
Agreed, in pocket detection was a b****, disabled it asap
iolinux333 said:
settings>display>in pocket detection
uncheck it
Click to expand...
Click to collapse
I dont use pocket detection. Its unchecked.
ah, then you need to contact the developer of the game and report the bug, so it can get fixed before the next update
Related
I'm Using My Xperia S Quite A Long, This Is My First Android Phone So Far!:cyclops:
Now Straight Coming To The Problem:silly:
In Market, There Seems To Be So Many Cool Apps Dealing With The Proximity Sensor Like:
1>Proximity Screen Off
2>Wave Control
etc
Well It Seems There Is No Problem Installing It, Or Crash (or force Close)
BUT
On These Application Gesture Function Nothing Seems To Work EXCEPT The 'COVER & HOLD' Mode
[e.g: say I Set 'Swipe Once' To Turn Off The Screen And 'Swipe Once' To Turn On The Screen...NO NOTHING WORKS!:crying:
Now Put 'Cover & Hold' To Both Turn On And Off The Screen Just As Before (in different gesture)...Works Like A Charm:laugh:]
Same Case Happens In Wave Control ('Default Pause Or Play' On 'Cover & Hold' Works, But 'Next Song' On 'Swipe Once' Doesn't Work:crying:
I've Even Uploaded A Video (SORRY FOR LOW QUALITY with Nokia X6 :silly Showing The Problem In 'Proximity Screen Off' App
http://www.youtube.com/watch?v=7CVFaV2QeIk
If Anyone Is Having The Same Problem Please Post It Down And Of Course The Solutions Are MOST WELCOME
AnYoNe!!??
Proximity Screen Off didn't work too well with my Xperia S...it had a problem with immediately switching the screen right back on after it triggered a screen off. I'm using Smart Screen Off myself, which I think is the best one of these sensor on/off apps I've seen yet. It has a lot of options and seems to have a better calibration for your proximity sensor and gyroscope. Not only can you trigger your screen on and off with the proximity sensor, but you can also shake the phone to turn the screen on/off, and flip it over to turn the screen off. I'm using a hand wave to turn the screen on, combined with a screen off widget and the flip over motion for turning the screen off, and it works great.
I do wish somebody could make an app like PGM Nexus for Xperias, that is an amazing app that's sadly for the Galaxy Nexus only. You can turn on your screen by just swiping left to right on the screen, or double tapping on it with that app. Swiping right to left at the screen bottom turns the screen back off.
Elsydeon said:
Proximity Screen Off didn't work too well with my Xperia S...it had a problem with immediately switching the screen right back on after it triggered a screen off. I'm using Smart Screen Off myself, which I think is the best one of these sensor on/off apps I've seen yet. It has a lot of options and seems to have a better calibration for your proximity sensor and gyroscope. Not only can you trigger your screen on and off with the proximity sensor, but you can also shake the phone to turn the screen on/off, and flip it over to turn the screen off. I'm using a hand wave to turn the screen on, combined with a screen off widget and the flip over motion for turning the screen off, and it works great.
I do wish somebody could make an app like PGM Nexus for Xperias, that is an amazing app that's sadly for the Galaxy Nexus only. You can turn on your screen by just swiping left to right on the screen, or double tapping on it with that app. Swiping right to left at the screen bottom turns the screen back off.
Click to expand...
Click to collapse
Thank You Very Much For Your Help! I'll Definitely Use The Mentioned App. But Have You Tried Wave Control? I'm Also facing the Same Problem With It!
Actually I Thought My Xperia S Is Defective One:crying:
And I think I've the Solution For Your Problem (immediately switching the screen right back on after it triggered a screen off)
Turn Off the Slide Unlock To None!___:good:
Wave controller not working in my xps also........
Sent from my LT26i using xda premium
zyclops1 said:
Wave controller not working in my xps also........
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Only Cover And Hold Work, Isn't It!:silly:
Proximity screen off pro works fine for me on the S. Swipe with one or two fingers.
Sent from my LT26i using xda premium
i have a xperia p on ics and the wave control app is working fine for me
Crocodile1973 said:
Proximity screen off pro works fine for me on the S. Swipe with one or two fingers.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Am I Doing Something Wrong? I Don't Think My Phone Is Defective, Coz The Hold & Cover Works Like Charm!! Any Idea??:silly::silly:
I'm Non-Rooted Though, If It Has Anything To Do With!
Anyone Else?
Anime13 said:
Am I Doing Something Wrong? I Don't Think My Phone Is Defective, Coz The Hold & Cover Works Like Charm!! Any Idea??:silly::silly:
I'm Non-Rooted Though, If It Has Anything To Do With!
Click to expand...
Click to collapse
Using 5.0.1 pick one or two finger, make sure start service. All I did. Run finger over sensor and it comes on. Two finger swipe turns off
Sent from my LT26i using xda premium
Yes i know this bug.
It's just because the proximity sensor is to slow.
And don't worry, it's a software bug.
To fix it, go to system/etc/hw.conf
You will see 'proximity sensor configuration"
CHange values
dev=/sys/bus/i2c/devices/3-0054/
val_cycle=1
val_nburst=1
val_freq=5
val_threshold=1
val_filter=1
Click to expand...
Click to collapse
Reboot and enjoy your applications
seburton said:
Yes i know this bug.
It's just because the proximity sensor is to slow.
And don't worry, it's a software bug.
To fix it, go to system/etc/hw.conf
You will see 'proximity sensor configuration"
CHange values
Reboot and enjoy your applications
Click to expand...
Click to collapse
Thank You Very Much , I'm A Little Noob At Thses Stuff So Does this Process Require Root?
Partially Solved
Anime13 said:
Thank You Very Much , I'm A Little Noob At Thses Stuff So Does this Process Require Root?
Click to expand...
Click to collapse
Yes, every changes.in system partition requires root
Sent from my LT26i using xda app-developers app
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Mr.Preacher said:
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Click to expand...
Click to collapse
See if enabling wake on volume helps:
Settings > Display > Volume rocker wake
Mr.Preacher said:
Is there a workaround or fix to the proximity sensor issue when using CyanogenMod 10.1? It doesn't matter which dialer I use, my screen goes blank and I can't get it back on to use the keypad or hang up.
Thanks in advance.
Click to expand...
Click to collapse
If you are using a screen protector, there is a known issue regarding placement. If the protector cutout is too close to the sensor, it will interfere with the proper operation of the sensor and blank out the screen too easily.
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
retrostudd said:
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
Click to expand...
Click to collapse
I don't have a screen protector. This solved it for me. Many thanks.
That said, the settings I'm using are a little weird. I have the Low set to 81, and it doesn't seem to matter what the High is set to (currently 100).
This fix works
retrostudd said:
I ran into a similar issue, turns out the tinting on the screen for the sensors had gotten dirty inside and I had to disassemble my phone and clean the sensor Windows. However if you don't like the idea of disassembling your phone, the HTC rezound proximity calibrator app on Google play might be helpful to you. I would try the app first before doing something more extreme.
Click to expand...
Click to collapse
this totally worked to fixed this same issue I have had. I used to have to go outside on a sunny day for my screen to come on while making a phone call. Once I used this app I was able to get it to come on in a dark room with hardly any light. I may at some point open her up and actually clean the inside of the sensor cover, but for now this worked like a charm.
Thanks for the tip.
One item to note, if you do decide to open your phone and clean the sensor windows, don't clean too aggressively or you will remove the tint from the backside of the glass. Just a tip.
I'm glad you guys have gotten your sensors working again.
I just had this problem today. Previously I never had issues with prox sensor, but just a couple days ago I did a complete wipe (data, cache, dalvik, system and internal SD card) and installed RC1 with a fresh install. The app mentioned above DID fix my issue however I know its a ghetto fix. Before running the app, the proximity sensor would work normally in good light, but not in low light. After running the app it works even in dark light which is great. However, I know its a weird fix. I can actually see the red proximity sensor during calls, when I couldn't previously. I'm glad I got it working, but I know there is something wrong still, and it's definitely ROM related as opposed to hardware because just 2 days earlier it worked fine before the clean install. Hmm..
Sent from my Incredible 4G LTE using xda app-developers app
Check this video ... hope developers will fix this ASAP ...
Note : You need an extra camera to see the Proximity light. Remember, you can't see this with open eyes ! Just like Infrared sensor.
greatricky said:
Check this video ... hope developers will fix this ASAP ...
Note : You need an extra camera to see the Proximity light. Remember, you can't see this with open eyes ! Just like Infrared sensor.
Click to expand...
Click to collapse
sorry but you can't see anything, I cannot read any of those blurred text lines.
the best solution for this is either to stop using it temporarily or switch to aosp4.3/cm10.2. all those sensors that samsung added only drain more battery.
broodplank1337 said:
sorry but you can't see anything, I cannot read any of those blurred text lines.
the best solution for this is either to stop using it temporarily or switch to aosp4.3/cm10.2. all those sensors that samsung added only drain more battery.
Click to expand...
Click to collapse
nevermind, just keep your eyes on the proximity sensor . It doesn't disappear after an incoming phone call !
anyway , how to stop that sensor permanently ?? it turned it off from > settings > call > turn off proximity sensor ! but still the light is visible ... it disappears after phone reboot !
ive noticed this as well
That's probably an air gestures thing.
Sent from my SGH-M919 using Tapatalk 2
elesbb said:
That's probably an air gestures thing.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Hmmm mine is always shutdown i guess....that purple color is new to me (from the vid)
If you display turns off when coming close to the sensor with your hand during a call, the sensor is active, you just can't see.
Some cameras can see the light, some don't. You can check with an it remote control from your TV!
David
have noticed how this is on. i was gonna go through each individual service running by the system and shut it down and see if it turns off. Its gotta be an APK or jar file doing it. Unless the kernel itself is for some weird reason.
elesbb said:
have noticed how this is on. i was gonna go through each individual service running by the system and shut it down and see if it turns off. Its gotta be an APK or jar file doing it. Unless the kernel itself is for some weird reason.
Click to expand...
Click to collapse
I already turned off all sensors and installed several firmwares (omega ,arrow, wanam) and kernels ... but still ... it's so annoying
The proximity sensor requires 0,350mAh power. That's < 1% usage since we have 2600mAh battery I *think*....
greatricky said:
I already turned off all sensors and installed several firmwares (omega ,arrow, wanam) and kernels ... but still ... it's so annoying
Click to expand...
Click to collapse
Do you know if its still there on CM or Google Edition ROMs?
how to turn it off????
nik511 said:
The proximity sensor requires 0,350mAh power. That's < 1% usage since we have 2600mAh battery I *think*....
Click to expand...
Click to collapse
So I guess you mean it takes 0.35mA.
So if you have a runtime of 15 hours, it takes 5.25mAh... really not that much.
David.
davidbaumann said:
So I guess you mean it takes 0.35mA.
So if you have a runtime of 15 hours, it takes 5.25mAh... really not that much.
David.
Click to expand...
Click to collapse
Yeah
omg on all world doesnt exist app which works on rooted phone and can kill proximity and gesture sensor???
The app Elixir say 0,75mah for my Samsung S4, but also 0,75mah for an original battery of 2600mah is few energy, 2600/0,75= 3467 hours.
Hi guys. I wonder if there is an option to stop the wake-up movement recognition. In the night I am flash by my watch lol. Any ideas?
jafar16 said:
Hi guys. I wonder if there is an option to stop the wake-up movement recognition. In the night I am flash by my watch lol. Any ideas?
Click to expand...
Click to collapse
So you sleep with your watch on? Just curious. I have no answer to you problem though, sorry.
No my screen is off but it pass on cause of gesture.
Mute the phone (pull down and hold).
Sent from my unknown using XDA Premium 4 mobile app
jimbobtexas said:
Mute the phone (pull down and hold).
Sent from my unknown using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That won't help with the gesture activation.
spiderflash said:
That won't help with the gesture activation.
Click to expand...
Click to collapse
I'm assuming he/she meant mute / DND the watch by pulling down from the 'home screen'. If so, yes. It will help with the gesture activation.
When I do it, the screen doesn't light up when at 45ยบ.
Like so: link
Thank you for the solution but I use the watch to wake me up by vibration at the morning. So mute it not help me . It would be better if we have an option in the firmware to switch on or off the movement wrist detection.
I have the opposite problem, I can't get my lg watch to wake up by moving it, I've tried different movements and nothing, the screen is set to be always on but the only way to wake it up from its dimmed state is to tap the screen.
DanSeb said:
I have the opposite problem, I can't get my lg watch to wake up by moving it, I've tried different movements and nothing, the screen is set to be always on but the only way to wake it up from its dimmed state is to tap the screen.
Click to expand...
Click to collapse
If really nothing works and the watch is not muted you probably have a defect. Especially if this was the case from the moment on when you got it. Request a replacement from where you bought it.
jafar16 said:
Thank you for the solution but I use the watch to wake me up by vibration at the morning. So mute it not help me . It would be better if we have an option in the firmware to switch on or off the movement wrist detection.
Click to expand...
Click to collapse
Try https://play.google.com/store/apps/details?id=com.procoit.wearmylauncher and activate the shower mode. It still vibrates but the screen is dimmed and won't turn on if you accidently touch it or move your wrist.
Godd idea, i will try.
For some reason, my phone seems to get triggered in the fingerprint sensor A LOT when in pocket, is there any workaround to address this problem besides removing fingerprint for unlocking?
Stop wearing skinny jeans ??
garylawwd said:
Stop wearing skinny jeans ??
Click to expand...
Click to collapse
I was hoping for a workaround that involved the phone and not what I wear ??
i too have same problem, this might be an issue if you are using the provided case from xiaomi ..
its the thing which is causing issues in my case..
Not sure if this help....
Go to Settings > Security & location > Fingerprints
Then switch off "Show fingerprint icon when the screen is off"