[Q] i think bricked my i9100. - Galaxy S II Q&A, Help & Troubleshooting

hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
with odin
cm9
stock ics
stock gingerbread
lightening rom
through cwm recovery mode
slim ics
thebyani
resurrection roms
dynamic rom
hydrogen rom
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
speedmod
phenominal extreme
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
if i flash a rom on my phone then binary count is not increasing but when i install a kernel then it increases. why so?
i can format ,mount ,unmount anything on phone but i cant format the user data or do a factory reset while doing that my phone hangs.
i even tried .PIT file with repartition ticked in the odin.
please tell me as if there is any hardware problem or just a normal problem?
now,
my phone says
cant access to /system/csc/SEK/system/'. in recovery
WHAT DOES IT MEAN ???
can any 1 help me?
Hey guys i got my phone working..
The problem was with siyah 3.1rc6.
It was emmc bug..
Motherboard has been replaced under warranty..
I flashed the official gb firmware and older bootloader ,then reseted my binary counts with usb jig...

shubham.dhand said:
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
cm9 ,stock ics ,lightening rom through odin
slim ics , thebyani , resurrection roms through cwm mode
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
Click to expand...
Click to collapse
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine

Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458

thanks buddy now i'm trying your advice.
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
now i'm doing as you said ,will tell you later that it worked or not..
thanks for your time and your valueable advice

yes my phome is i9100 and i waited for a long time.
Kaze105 said:
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.

shubham.dhand said:
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
Click to expand...
Click to collapse
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje

i did that.
JJEgan said:
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
Click to expand...
Click to collapse
i did as you said but it is not working.
i still cant format/data or factory reset before or after flashing/installing rom via cwm recovery or odin.
still the problem remains the same.i cant delete the user data or cant do factory reset

did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22

Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
when i flash gb rom then after flashin there is a installation process in the phone in which it says that cant open data/recovery_log. something like this.
it happens so fast that i couldn't read that.

yeah i gone through these threads.
aHcVolle said:
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Click to expand...
Click to collapse
but should i go for flashing my phone with the .pit file?

Nooooooooooooo wait wait wait,don't ever touch pit files and repatition

i would try it but i hope it won't make your problems worse ...
[edit]
ok then not ...

Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA

flash with odin a firmware with 3 file.
Inviato dal mio Transformer Prime TF201 con Tapatalk 2

kedai said:
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yup i had siyah 3.1rc6 on my phone.
i tried to restore my nandroid backup but there is no effect on my problem.
how to know weather emmc is fine or currupted?

Try to mount it in CWM and connect it in linux computer and run fsck to check the eMMC. Windows chkdsk is no good.
And please try to remember, did you do this step: flash bad siyah rc6 then wipe/factory reset and get stuck?
if not, then the problem is different from those who flash bad rc6 (which is removed now and siyah is safe)

any thing is not working.
in every thread its written that if my phone goes in download mode and recovery mode then its soft bricked but then how can i unbrick my phone?
or is there any hardware problem?
i can mount and unmount every thing in recovery mode
i can format every thing but only user data cannot be formated,when ever i format/data or factory reset the phone hangs.

is there any other way of hard resetting i9100.?other than cwm recovery?

Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.

Phistachio said:
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Click to expand...
Click to collapse
yup i tried .PIT file too.
tried older bootloader also.but there is no effect on my phone

Related

[Q] [URGENT] Phone turns on and reboot (repeatly)

After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
cooza said:
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
Click to expand...
Click to collapse
borstri said:
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
Click to expand...
Click to collapse
After I hard reset and wiped cache..its still reboots..
Someone help me!! :'(
now it looks that only solution is to reflash, go to
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=7#regiona
or
http://forum.xda-developers.com/showthread.php?t=1113928
find something u like and flash it with odin.
http://forum.xda-developers.com/showthread.php?t=1110160&highlight=odin+how+to
dont bother wit finding of exact fw. for you, find something that is for your region....
Is it flash it by using odin?
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
borstri said:
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
Click to expand...
Click to collapse
After I flashed it, it turns to the CWM screen and install the Multi-csc..something like that..and it reboot..after it reboot..its still turns to CWM and install the multi-csc.
So what should I do now?
you have done something wrong, or taken wrong rom image, since after flashing with ODIN stock rom you WILL ENDUP with stock recovery! Dont know what you flashed, but it was not stock rom.
What rom you took exactly??
"GT-I9100_SIN_I9100DXKI2_I9100OLCKH1_I9100DXKI1"
I flash this..is this a boot loop or other problem?
Hey dude, thanks for helping me so much..
My phone is working now..but I have to download my things again..=(
Alright. Thanks!
no problem, been in that situation. check some custom roms when u have time....you'll be amazed what this device can do.
and in clockwork recovery you have backup and restore, setup phone just how you like it, make a CWM backup and you are always sure that rescue is there....don't need odin or PC for that.
Flash Supercore with odin as PDA or some other kernel that has CWM recovery
The problem occured again just now, its after i dpwnlpad some apps from market..and its still not completely remove the hanging problem..And my laptop died. LOL.
Anyone here?
May i sugest u reflash stock rom and return it to the store.
If u have random reboot after flashing stock rom there is obviouse something wrong with your device.
hi
my gs2 turns on and reboot repeatly when i put micro sd card and install app in sd card .
help me too .
sorry for bad english .
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
Your kernel is it also stock?

[Q] [Help] stuck at data.img?

What I did?
a. I was on MIUI 2.4.20
b. Did factory reset from CWM(SiyahKernel v3.1rc6)
c. After then my phone stuck on samsung boot logo.
d. Then i flashed my phone with stock firmware ICS XWLP7.
d(a). I also flashed XXKPA with PIT file(I know not to flash but still I Did, Dnt Know y...), flashing stops at data.img.
<whenever i use 3 files combination(code,modem n csc) i stuck at data.img>
e. After that my phone stuck at samsung logo and restart.
f. i tried to flash XXLPH(Recovery firmware) and succeeded but still on samsung boot logo.
g. Then Flash Lightening Rom 6.1 successfully.
h. I can get into recovery but sd-card mount failed, cache partition failed,etc.
I am able to get in download mode
Able to get in recovery mode only after flashing lightening 6.1(but sd-card mount failed, cache partition failed,etc.)
Please Help me If You Can. i really need>>>>>>>
I tried to find many post but did'nt find a solution
Thank you In Advanced.
m8 wen u hav a prblm stop there and ,read ,an post ur flashin so many times...anywayz if ur getting download mode try flashing the stock rom gb and then do factory reset...
rocky23 said:
m8 wen u hav a prblm stop there and ,read ,an post ur flashin so many times...anywayz if ur getting download mode try flashing the stock rom gb and then do factory reset...
Click to expand...
Click to collapse
buddy i am not able to factory reset....I can get in to recovery only by just flashing lightening rom 6.1 but sd-card mount failed, cache partition failed,etc.
problem after doing a factory reset from (SiyahKernel v3.1rc6) recovey is a known issue now...please read the Siyah kernel thread you may find any solution.....
ZACQ8 said:
problem after doing a factory reset from (SiyahKernel v3.1rc6) recovey is a known issue now...please read the Siyah kernel thread you may find any solution.....
Click to expand...
Click to collapse
No i did'nt find suitable solution to my problem.....
feroz_bilal said:
No i did'nt find suitable solution to my problem.....
Click to expand...
Click to collapse
Regret that we are also awaiting the solutions still for those who got effected with that perticula version of the Kernel..
you can still try different firmwares from ODIN,
Plz see the attachment if this could help you to understand my problem.....
did you try any other ROMs, after doing a factory reset, and wipes...
ZACQ8 said:
did you try any other ROMs, after doing a factory reset, and wipes...
Click to expand...
Click to collapse
boss, i tried 6 roms even http://forum.xda-developers.com/showthread.php?t=1457458 this guide as well.....
flash stockkkkk gb rom and stock kernel , and after that you will have stock recovery as i think which you can make factory reset from it and all will be fine
say thanks to god because your phone isn't hard bricked
also read these threads will solve your problem , read carefully
http://forum.xda-developers.com/showthread.php?t=1108499
and this is for softbricked phones which also will help you ,
http://forum.xda-developers.com/showthread.php?t=1457458
evaworld said:
flash stockkkkk gb rom and stock kernel , and after that you will have stock recovery as i think which you can make factory reset from it and all will be fine
say thanks to god because your phone isn't hard bricked
also read these threads will solve your problem , read carefully
http://forum.xda-developers.com/showthread.php?t=1108499
and this is for softbricked phones which also will help you ,
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
No, the guide which is used to unbrick, in that i am stuck at flashing(see attachment) at data.img????
Ok download mode it's good, flash stock GB ROM, than the wipe code, *2767*3855#
It should wipe now. After that flash the cfroot the newest one, don't have to be your version , when it reboots go to recovery, it will be new recovery now, 5. **
From there format system partition plus all other usual wipes.
Now go to download mode again and flash the stock GB or ICS ROM and wipe with code one last time. You should be fine now.
Sent from my GT-I9100
atifsh said:
Ok download mode it's good, flash stock GB ROM, than the wipe code, *2767*3855#
It should wipe now. After that flash the cfroot the newest one, don't have to be your version , when it reboots go to recovery, it will be new recovery now, 5. **
From there format system partition plus all other usual wipes.
Now go to download mode again and flash the stock GB or ICS ROM and wipe with code one last time. You should be fine now.
Sent from my GT-I9100
Click to expand...
Click to collapse
sir I am trying to flash 3 package files and downloaded many firmwares but it gets stuck at flashing(at datafs or data.img)????
did u use a pit file while the first flash if yes wat was it?
****************check pm***************
rocky23 said:
did u use a pit file while the first flash if yes wat was it?
****************check pm***************
Click to expand...
Click to collapse
sir, i tried as you said but back with same problem i.e. stuck at data.img????
feroz_bilal said:
sir I am trying to flash 3 package files and downloaded many firmwares but it gets stuck at flashing(at datafs or data.img)????
Click to expand...
Click to collapse
Same problem, stucks at data.img, trying everything
bro...i have same problem with u now..
n i think i should send my phone to samsung centre now... :'(
But you didn't even try what I said, instead you do what you like, is it? Or you tried it but failed?
Sent from my GT-I9100 using Tapatalk 2
atifsh said:
But you didn't even try what I said, instead you do what you like, is it? Or you tried it but failed?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
my phone cannot boot..only stuck at samsung logo....it dont even enter the OS as well...
Try flashing the latest siyah kernel using ODIN.
Sent from my GT-I9100 using xda premium

[Q]Installing custom rom on I9100.. Possibly bricked

Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
arunreturns said:
Ok heres what i did.
First On 2.3.6 KL1 i presume. Rooted my phone using CF ROOT
http://forum.xda-developers.com/showthread.php?t=1103399
Then Installed F1 Galaxy Nexus ROM
http://forum.xda-developers.com/showthread.php?t=1601518
Then tried to dual boot (Greedy me!)
The other ROM i thought of was Resurrection ROM..
Then i installed it. Using this guide
http://forum.xda-developers.com/showpost.php?p=24233085&postcount=2
So the next time i installed Siyah 3.2b5 My phone didn't boot after The initial S2 logo.
So I then flashed a new ROM KL8 from Odin
Its working fine.
But am not able to install any other ROM.
Any idea what might be the issue?
Thanks in Advance
Click to expand...
Click to collapse
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Did Root once again (Sorry For not mentioning)
Sun90 said:
the KL8 rom u installed from odin is it a stock firmware if yes then u have lost root privealage hence u have 2 root it once agian using a cf root kernel
then only u can install any other roms
Click to expand...
Click to collapse
Yeah i did root using CF Root. Hence i got CWM from which i did wipe data, wipe cache and then Installed zip from sdcard. (F1 galaxy nexus from Faryaab) It got installed. Then again stuck at the boot logo. Dont see the boot animation
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Tried it no go
atifsh said:
Try formatting system partition and get the file again, might be corrupt download
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi..
I did what you told me to. Still get the same boot logo
Guess my phone is done for R.I.P
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
What intrigues me is that, If i use KL8 alone (which is flashed via odin) Am able to use the mobile. use it well actually
But if i try to use any other ROM its stuck in the Boot logo
I tried LPQ from Intratech. Even that didnt work.
I thought this could be an issue with the kernel
(But i realised i was able to flash CF Root's kernel and move back to stock kernel so there would be no issue with regards to Kernel.)
Incorrect or Incomplete download wont be an issue i guess as I tried two to three ROMS.
Btw. I used this link
http://www.technetinfo.in/mobile/mobile-software/i9100xxkp8-android-403.html
I followed all the Instructions (Guess may be cause of the PIT file. I'm not sure cause ive seen in posts that we should not lay hands on PIT files)
So someone please help me out.
Will be ever so grateful
atifsh said:
Don't think so phone is rip, download the file again, or try some other ROM
If I were you I do this
formatting system, cache, data and after that flash stock GB using Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
By formating system cache data you mean wipe options in CWM right. That i have done lotsa times. Can kernel failure cause these issues, as once i got Kernel panic mode error??
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Finally Issue solved
JJEgan said:
If you follow a link from another forum why not ask them its their instructions after all .
XDA says total wipe of the phone and start again.
and do not touch a PIT file ever .
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery >>>> install CF root if no recovery first .
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
Pick your custom rom and follow instructions .
jje
Click to expand...
Click to collapse
cooza said:
I think the problem was that you tried to dual boot with a 4.0.3 and a 4.0.4 ported ROM.As far as Im aware 4.0.3 is the supported ROM for dual boot with Siyah kernel.I personally wouldnt trust 4.0.4 dual boot yet.Do as posted above and you should be O.k.
Click to expand...
Click to collapse
Thank you for your help.
Issue has been solved. Now am able to Install F1 Galaxy Nexus ROM
I'm putting dual booting aside for now. Will stay on CM9 kernel itself
Thanks again for your help

[Q] Help me please.. Galaxy s2 stuck on boot logo...

I am a newbie from Nepal. I dont have much knowledge of flashing. A week ago i tried to flash CMW recover while i was in resurrection remix JB rom. Till then i am not able to start my phone because it freezes at "Samsung Galaxy S2" logo... Now i dont know the CSC, PDA and kernel version of my mobile. So please help me solve my problem, how can i make it work?
Boot into recovery (Turn phone off. Then hold home/power/volume up) & do a wipe/factory reset. Or if you have a recent backup (or any backup) restore that from recovery. I've done this a couple of times over the past few mths when my phone has spontaneously bootlooped.
didnt help
MistahBungle said:
Boot into recovery (Turn phone off. Then hold home/power/volume up) & do a wipe/factory reset. Or if you have a recent backup (or any backup) restore that from recovery. I've done this a couple of times over the past few mths when my phone has spontaneously bootlooped.
Click to expand...
Click to collapse
I can boot into CWM recovery but the wipe/factory reset and cache deletion too would not help.. I dont have any backup and i am not able to access my external sd card too... so please can you help me now...
Boot into download mode (Phone off. Home, power, volume down) & flash a stock rom in Odin; go to Samfirmware or AndroidFirmwares.net & get a stock rom (or get the PC version of Checkfus). Flashing instructions here
help me again
MistahBungle said:
Boot into download mode (Phone off. Home, power, volume down) & flash a stock rom in Odin; go to Samfirmware or AndroidFirmwares.net & get a stock rom (or get the PC version of Checkfus). Flashing instructions here
Click to expand...
Click to collapse
Now i dont know PDA, PHONE and CSC of my SGS2, So how can i select the particular rom for my SGS2.. Please let me know.....
Flash an old rom on your sd card maybe?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Dannyvld said:
Flash an old rom on your sd card maybe?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Click to expand...
Click to collapse
Sorry i cant access my external sd card in CWM recovery and i dont know how to access internal memory of my phone since it can only boot into recovery and download mode...
In that case flash any stock rom you like. I gather you'll be going back to a custom rom pretty quickly in any case (?) so it doesn't matter. Whatever you do tho, do not flash a PIT.
liveondead said:
Now i dont know PDA, PHONE and CSC of my SGS2, So how can i select the particular rom for my SGS2.. Please let me know.....
Click to expand...
Click to collapse
MistahBungle said:
In that case flash any stock rom you like. I gather you'll be going back to a custom rom pretty quickly in any case (?) so it doesn't matter. Whatever you do tho, do not flash a PIT.
Click to expand...
Click to collapse
All I can do is download a rom which is in zip format, but i know odin does not support .zip but it supports .tar, so how can i download rom in .tar, also does it matter if I flashed the rom which is not meant for my region?(I mean I dont know my phone's PDA and I am not able to decide which firmware to download since every firmware has its own specific PDA)... Yes, I'll be going back again to custom rom after I make it work...haha
AFAIK a rom for another country wont break your phone, but be careful with 4.0.4 roms because of the brickbug
liveondead said:
All I can do is download a rom which is in zip format, but i know odin does not support .zip but it supports .tar, so how can i download rom in .tar, also does it matter if I flashed the rom which is not meant for my region?(I mean I dont know my phone's PDA and I am not able to decide which firmware to download since every firmware has its own specific PDA)... Yes, I'll be going back again to custom rom after I make it work...haha
Click to expand...
Click to collapse
go to http://www.sammobile.com/firmware/?page=3 and choose the stock or even another stock rom you wish, download it.
Boot into download mode and flash the single .tar file through odin, flashing instructions can be found here: http://forum.xda-developers.com/showthread.php?t=1075278
PD: if the downloaded file is .zip and not .tar, just extract the zip and u'll get the .tar
Delta25 said:
AFAIK a rom for another country wont break your phone, but be careful with 4.0.4 roms because of the brickbug
Click to expand...
Click to collapse
Amm, now i have a android 4.0.4 firmware in odin supported format.. and i am about to flash using odin.. but i got confused what did you mean by "but be careful with 4.0.4 roms because of the brickbug".. Please explain me... And thankx in advance..
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
MistahBungle said:
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
Click to expand...
Click to collapse
Oh god, I am so confused. When I selected my PDA in the odin interface and I clicked start, it says "The Parameter is incorrect".. What can I do now???
MistahBungle said:
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
Click to expand...
Click to collapse
Please help, when i tried to flash android 4.0.4, odin says "The Parameter is Incorrect"...
liveondead said:
Please help, when i tried to flash android 4.0.4, odin says "The Parameter is Incorrect"...
Click to expand...
Click to collapse
Parameter is incorrect error can be caused by either of two reasons
1 . something is wrong with the file you downloaded try re downloading
2.Kies is interfering with Odin, terminate Kies from the background by using the task manager.
Using GT - I9100
Just hit the damn help button if I helped you.
A lot of Thankx..
I wanna thank all of the members of the forum who have helped me in fixing my mobile. I finally fixed it by flashing the stock rom android 4.0.3, and it is doing perfect but laggs sometimes....:good:
Glad you got it sorted
liveondead said:
I wanna thank all of the members of the forum who have helped me in fixing my mobile. I finally fixed it by flashing the stock rom android 4.0.3, and it is doing perfect but laggs sometimes....:good:
Click to expand...
Click to collapse
When my phone bricked i went to the store, they set the official software over my rooted one, i had very much lag, just flash a good rom and its over.
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)

cwm doesnt start/stuck at loading screen after stock flashed

Hey guys,
yesterday i flashed the latest unofficial temasek rom, before that i had cm 10.2.
at first it worked fine, but afterwards i also flashed the latest gapps.
it lagged a bit so i did a reboot but then it stuck at loading screen. i mean it seemed like it boots but it didnt continue.
i tried to get in cwm and it took about 5 minutes to get there, it said cant mount data etc.
i wanted to flash the normal cm11 but there was an error and then it couldnt start anymore. no blue circle.
after several minutes i got in the cwm and tried to flash different roms, at first custom via cwm, then i tried to flash the stock via odin and
it said it was successfull, but it wasnt. it still stuck at loading but its not frozen, the animation works well.
i tried wipes and factory reset but it didnt help. the only thing that works well is download mode.
its a normal unbranded s3.
thanks for helping
Flash Philz recovery
Or flash stock rom via Odin .
JJEgan said:
Flash Philz recovery
Or flash stock rom via Odin .
Click to expand...
Click to collapse
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
kom4for2 said:
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
Click to expand...
Click to collapse
Dont wate ur time Go to download mode then flash stock rom...
danierakes said:
Dont wate ur time Go to download mode then flash stock rom...
Click to expand...
Click to collapse
like i already said. the last rom i flashed was a stock rom. but it didnt work..
it still stucks at the animation..
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Zizza said:
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Click to expand...
Click to collapse
wiped all data cache and did factory reset, nothing helped.
custom rom via cwm flashed and stock rom via odin, but it still doesnt boot...
its still stuck at the animation..
i wanted to try the 3 part flash but mostly its uploaded at hotfile, and hotfile was shutted down...
could anyone show me a working link? and whats that pitfile i heard in some forums?
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
JJEgan said:
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
Click to expand...
Click to collapse
it finally works, but its quite instable. i took the battery out when it was still running, after that it couldnt start.
the only thing that work is the stock rom recovery, cwm or philz do not work...
i had to do the factory reset. but the only thing that doesnt work is
ok, there was a message called factory mode...
im trying to get a new stock..
kom4for2 said:
ok, there was a message called factory mode...
im trying to get a new stock..
Click to expand...
Click to collapse
Read the faqs .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221

Categories

Resources