Hey guys,
yesterday i flashed the latest unofficial temasek rom, before that i had cm 10.2.
at first it worked fine, but afterwards i also flashed the latest gapps.
it lagged a bit so i did a reboot but then it stuck at loading screen. i mean it seemed like it boots but it didnt continue.
i tried to get in cwm and it took about 5 minutes to get there, it said cant mount data etc.
i wanted to flash the normal cm11 but there was an error and then it couldnt start anymore. no blue circle.
after several minutes i got in the cwm and tried to flash different roms, at first custom via cwm, then i tried to flash the stock via odin and
it said it was successfull, but it wasnt. it still stuck at loading but its not frozen, the animation works well.
i tried wipes and factory reset but it didnt help. the only thing that works well is download mode.
its a normal unbranded s3.
thanks for helping
Flash Philz recovery
Or flash stock rom via Odin .
JJEgan said:
Flash Philz recovery
Or flash stock rom via Odin .
Click to expand...
Click to collapse
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
kom4for2 said:
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
Click to expand...
Click to collapse
Dont wate ur time Go to download mode then flash stock rom...
danierakes said:
Dont wate ur time Go to download mode then flash stock rom...
Click to expand...
Click to collapse
like i already said. the last rom i flashed was a stock rom. but it didnt work..
it still stucks at the animation..
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Zizza said:
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Click to expand...
Click to collapse
wiped all data cache and did factory reset, nothing helped.
custom rom via cwm flashed and stock rom via odin, but it still doesnt boot...
its still stuck at the animation..
i wanted to try the 3 part flash but mostly its uploaded at hotfile, and hotfile was shutted down...
could anyone show me a working link? and whats that pitfile i heard in some forums?
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
JJEgan said:
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
Click to expand...
Click to collapse
it finally works, but its quite instable. i took the battery out when it was still running, after that it couldnt start.
the only thing that work is the stock rom recovery, cwm or philz do not work...
i had to do the factory reset. but the only thing that doesnt work is
ok, there was a message called factory mode...
im trying to get a new stock..
kom4for2 said:
ok, there was a message called factory mode...
im trying to get a new stock..
Click to expand...
Click to collapse
Read the faqs .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Related
first of all plz don't hate for making a new thread i really searched some time and i dind't find anything that helped me.
my sgs2 is stuck at the boot screen (splash screen with the S and "samsung galaxy sII" underneath).
i can access recovery and download mode. so i did a data/cache wipe and factory reset and than i flashed an original firmware with odin. flahs worked fine but my phone is still not booting. i also flashed an insecure kernel and tried - not working so i reflashed the original kernel - still not working. btw i flashed this one "GT-I9100_XEU_I9100XWKE7_I9100XXKE4_I9100XEUKD1".
so can anyone help me plz?!
Lol. Funny.
Sent from my Kyocera Echo.
POST ONE
http://forum.xda-developers.com/showthread.php?t=1108499
jje
JJEgan said:
POST ONE
http://forum.xda-developers.com/showthread.php?t=1108499
jje
Click to expand...
Click to collapse
as i said in my first post if you would have read it i already did this and it is not working!
have you tried updating thru KIES?
which region is your handset from?
and you have already tried using the USB Jig too...right? after reading the POST one
If you belong to XEU, Kies would update the phone to KF3.
After updating the firmware normally the phone gets stuck in the boot screen for 10-15 secs first time around. i hope you are leaving it there for a minute or so.
i tried kies but it didnt recognize the phone.
i also flashed kf3 now but it is still not working. left it on splash screen for about 10 mins or so...
Well for starters a question about failed boot would be better answered in a failed boot thread and you dont mention you have read that post in your OP .
Clean flash
Via CWM recovery mounts and storage format SD card System Data Cache and this will wipe all data .
Factory reset .
Phone will now not boot .
Enter download mode .
Open Odin
Download a stock rom and following instructions connect USB cable and flash .
That fails its a service centre job .
jje
ok jjegan can you plz explain that again so a noob can do it too?
Clean flash
Boot into recovery go to mounts and storage format SD card System Data Cache and this will wipe all data .
Factory reset .
Phone will now not boot no OS .
Enter download mode .
Open Odin
Download a stock rom and following instructions connect USB cable and flash .The same method you used .
jje
That fails its a service centre job .
Firstly, you did mention that you tried a factory reset, so the third post from JJE has no merit, so instead of assuming we know everything and rushing to answer, we need to determine the conditions under which your phone is no longer booting.
Was the phone working normally?
If it was, what rom was the phone running in the first place, and what did you do (if anything) before it got stuck at the boot logo?
The last post by JJE is "assuming" you have the CWM recovery, I am going to ask you, which recovery do u have, is it the stock recovery or the CWM recovery. if it's the ClockworkMod you would know.
Did you try a normal reboot or did you try flashing something on the phone before you got the bootloop?
yes the phone was working normally. i didn't do anything before it got stuck at boot. The stock rom with t-mobile austria branding was running on it. i can't say the exact version. The phone began to lag during games and browsing so i turned it off and wanted to turn it on again as it got stuck at boot logo.
no i do not have cwm installed so the factory reset and data/cache wipe was done from stock recovery.
after several on/off switches i tried flashing an unbranded stock rom available in this forum. first ke7 then kf3 but the phone still wont boot. also kies is not recognizing the phone.
thanks in advance.
What you want to do is get in into download mode open odin and
download and extract this
http://androidadvices.com/downloads/GalaxyS2_GTI9100_XXKG3_2.3.4.zip
tick repartition
click on PIT and select u1_02_20110310_emmc_EXT4.pit,
click on PDA and select CODE_I9100XXKG3_CL401405_REV02_user_low_ship.tar.md5,
click on Phone and select MODEM_I9100XXKG3_REV_02_CL1040774.tar.md5,
click on CSC and select GT-I9100-CSC-MULTI-OXAKG3.tar.md5,
flash it
after all done perfectly reboot to recovery and wipe partition cache
reboot once again and you are done
if this helped reply me
unfortuantly it didnt work out. i did everything as you described but it still got stuck at the boot screen.
i really dont know what to do any more...
Downloaded but asking for password to unzip?
One of the major do not touch is both repartition and pit file especially for a novice .
You have taken the steps in the Boot loop thread post recovery wipe user data . Download mode followed by flash a stock rom that fails flash Villain rom .
Personally i would take the phone to a service centre and claim it stopped working during a Kies update .
jje
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
x-timewinder-x said:
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
Click to expand...
Click to collapse
In recovery did u try the:first clear cache and then wipe data/factory reset.After these reboot
Sent from my GT-I9100 using Tapatalk
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
x-timewinder-x said:
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
Click to expand...
Click to collapse
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
x-timewinder-x said:
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
Click to expand...
Click to collapse
Not necessarily.
Similar thing happened to me with KI8.
Was all good on KG1.
Flashed intratechs KI8 all good.
Flashed cfroot for KI8 had to factory reset to get root to work.
All was good at this point.
Flashed siyah 1.8 kernel all good.
CWM backuped.
CWM flashed % battery mod and stuck on Samsung logo at boot.
CWM restore still stuck at Samsung logo at boot.
Tried lots of things to fix but no go.
CWM restore of KG1 and all good again.
Still trying to work out what went wrong and will post the fix when/if I find out.
Sent from my GT-I9100 using XDA App
I have this problem too. For some reason, the only rom I can flash is Cognition 1.6 . The rest seem to just get stuck at the Galaxy S2 logo
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
with odin
cm9
stock ics
stock gingerbread
lightening rom
through cwm recovery mode
slim ics
thebyani
resurrection roms
dynamic rom
hydrogen rom
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
speedmod
phenominal extreme
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
if i flash a rom on my phone then binary count is not increasing but when i install a kernel then it increases. why so?
i can format ,mount ,unmount anything on phone but i cant format the user data or do a factory reset while doing that my phone hangs.
i even tried .PIT file with repartition ticked in the odin.
please tell me as if there is any hardware problem or just a normal problem?
now,
my phone says
cant access to /system/csc/SEK/system/'. in recovery
WHAT DOES IT MEAN ???
can any 1 help me?
Hey guys i got my phone working..
The problem was with siyah 3.1rc6.
It was emmc bug..
Motherboard has been replaced under warranty..
I flashed the official gb firmware and older bootloader ,then reseted my binary counts with usb jig...
shubham.dhand said:
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
cm9 ,stock ics ,lightening rom through odin
slim ics , thebyani , resurrection roms through cwm mode
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
Click to expand...
Click to collapse
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
thanks buddy now i'm trying your advice.
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
now i'm doing as you said ,will tell you later that it worked or not..
thanks for your time and your valueable advice
yes my phome is i9100 and i waited for a long time.
Kaze105 said:
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
shubham.dhand said:
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
Click to expand...
Click to collapse
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
i did that.
JJEgan said:
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
Click to expand...
Click to collapse
i did as you said but it is not working.
i still cant format/data or factory reset before or after flashing/installing rom via cwm recovery or odin.
still the problem remains the same.i cant delete the user data or cant do factory reset
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
when i flash gb rom then after flashin there is a installation process in the phone in which it says that cant open data/recovery_log. something like this.
it happens so fast that i couldn't read that.
yeah i gone through these threads.
aHcVolle said:
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Click to expand...
Click to collapse
but should i go for flashing my phone with the .pit file?
Nooooooooooooo wait wait wait,don't ever touch pit files and repatition
i would try it but i hope it won't make your problems worse ...
[edit]
ok then not ...
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
flash with odin a firmware with 3 file.
Inviato dal mio Transformer Prime TF201 con Tapatalk 2
kedai said:
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yup i had siyah 3.1rc6 on my phone.
i tried to restore my nandroid backup but there is no effect on my problem.
how to know weather emmc is fine or currupted?
Try to mount it in CWM and connect it in linux computer and run fsck to check the eMMC. Windows chkdsk is no good.
And please try to remember, did you do this step: flash bad siyah rc6 then wipe/factory reset and get stuck?
if not, then the problem is different from those who flash bad rc6 (which is removed now and siyah is safe)
any thing is not working.
in every thread its written that if my phone goes in download mode and recovery mode then its soft bricked but then how can i unbrick my phone?
or is there any hardware problem?
i can mount and unmount every thing in recovery mode
i can format every thing but only user data cannot be formated,when ever i format/data or factory reset the phone hangs.
is there any other way of hard resetting i9100.?other than cwm recovery?
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Phistachio said:
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Click to expand...
Click to collapse
yup i tried .PIT file too.
tried older bootloader also.but there is no effect on my phone
First I had XXLPQ then I flashed siyah kernel v3.2.8 through CMW, I used it for like a day then everything started crashing so I just rebooted and then I got a bootloop.
I flashed XWLP7 it got stuck at the bootlogo(before animation screen) so I went into recovery mode and then it said "successful csc install (KOR)" something like that then I flashed siyah kernel v3.3.1 though ODIN, now I tried to change the CSC though the menu by using *#272*IMEI No# then it just never booted it just stays at the "Samsung Galaxy S II" the one before the animation screen.
I tried searching i found nothing similar...
I think its a boot loader problem, How do i flash a boot loader ?
pleease help
EDIT: I finally got it into download mode, now can someone please tell me whats the issue ?
bootloaders are roughly half way down 1st post http://forum.xda-developers.com/showthread.php?t=1075278
edit: if youve got it into download mode just flash a stock rom for now so you have a working device again
skimminstones said:
bootloaders are roughly half way down 1st post http://forum.xda-developers.com/showthread.php?t=1075278
edit: if youve got it into download mode just flash a stock rom for now so you have a working device again
Click to expand...
Click to collapse
Thanks yes as I said I flashed a new stock rom and kernel but no use anyway am gona flash a bootloader which I finally found here
I think there was an issue with the bootloader and kernel, i flashed the bootloader but it didnt work so I flashed a CF-root kernel and it finally worked .
Ba7rani123 said:
I think there was an issue with the bootloader and kernel, i flashed the bootloader but it didnt work so I flashed a CF-root kernel and it finally worked .
Click to expand...
Click to collapse
So now it boots past the Galaxy S2 screen? I have experienced that for 2-3 times now, same thing where everything started crashing and rebooting the phone will end up stuck at the bootscreen. What I had to do is to wipe data, dalvik, and cache then only it would work again.
It could be due to the particular ROM used as I have not experienced it after using the newer XWLPD for a few weeks now.
nanoronline said:
So now it boots past the Galaxy S2 screen? I have experienced that for 2-3 times now, same thing where everything started crashing and rebooting the phone will end up stuck at the bootscreen. What I had to do is to wipe data, dalvik, and cache then only it would work again.
It could be due to the particular ROM used as I have not experienced it after using the newer XWLPD for a few weeks now.
Click to expand...
Click to collapse
its a siyah kernel v2.3.8 issue where some files get corrupt, so even after flash v3.3.1 some files maybe corrupt also. So a full wipe is advised after backup.
Hoesntly I dont know but I think that its linked to the rom :/.
Ba7rani123 said:
its a siyah kernel v2.3.8 issue where some files get corrupt, so even after flash v3.3.1 some files maybe corrupt also. So a full wipe is advised after backup.
Hoesntly I dont know but I think that its linked to the rom :/.
Click to expand...
Click to collapse
No back then I was still using the stock kernel. Just rooted with ChainFire's method and that's all.
nanoronline said:
No back then I was still using the stock kernel. Just rooted with ChainFire's method and that's all.
Click to expand...
Click to collapse
Maybe a bootloader issue, see this thread it explains alot
http://forum.xda-developers.com/showthread.php?t=1457458
If u can boot to recovery then its fine but if u can only boot into download mode then u have corupption
Ba7rani123 said:
Maybe a bootloader issue, see this thread it explains alot
http://forum.xda-developers.com/showthread.php?t=1457458
If u can boot to recovery then its fine but if u can only boot into download mode then u have corupption
Click to expand...
Click to collapse
No I could boot into both recovery and download modes. Back then I tried flashing the same firmware and newer firmware but both still ended stuck at the boot screen. Only after I booted into recovery to wipe data, Dalvik cache and cache then it booted past the bootscreen and working again.
nanoronline said:
No I could boot into both recovery and download modes. Back then I tried flashing the same firmware and newer firmware but both still ended stuck at the boot screen. Only after I booted into recovery to wipe data, Dalvik cache and cache then it booted past the bootscreen and working again.
Click to expand...
Click to collapse
maybe some of the data was corrupt *-)
i already did a search in google and XDA but nothing worked ! please read carefully
my G925I just restarted and never be able to boot again, so i enter to stock recovery and wiped cache data BUT no luck, and flashed a stock firmware and still the same, it's boot to stuck recovery and show installing updates BUT at 30% its stop and saying "erasing" then its reboot and stay in bootloop,
i managed to get into download mode and flashed TWRP recovery, when ever i try to flash a rom the phone restart again and enter bootloop and it's never shutdown!!
tried :
1- wipe everything
2- flash more than one stock firmware
3- flash recovery and succeeded BUT it's keep restarting !
4- flash custom ROM BUT no luck, keep restart at installing !
5- flashed custom kernel and it WORKED :good:
for now i can only boot into download mode without restart
have a solution ? :crying:
hussam_qashu said:
i already did a search in google and XDA but nothing worked ! please read carefully
my G925I just restarted and never be able to boot again, so i enter to stock recovery and wiped cache data BUT no luck, and flashed a stock firmware and still the same, it's boot to stuck recovery and show installing updates BUT at 30% its stop and saying "erasing" then its reboot and stay in bootloop,
i managed to get into download mode and flashed TWRP recovery, when ever i try to flash a rom the phone restart again and enter bootloop and it's never shutdown!!
tried :
1- wipe everything
2- flash more than one stock firmware
3- flash recovery and succeeded BUT it's keep restarting !
4- flash custom ROM BUT no luck, keep restart at installing !
5- flashed custom kernel and it WORKED :good:
for now i can only boot into download mode without restart
have a solution ? :crying:
Click to expand...
Click to collapse
This is a soft boot due to the fact you still have the ability to access recovery and such what i would suggest you do is get factory files and restore phone back to stock and start over this should fix your problem. If you look around XDA you will find the files you will need ODIN being the main tool you will use to flash your phone.
The_Fallen_angel said:
This is a soft boot due to the fact you still have the ability to access recovery and such what i would suggest you do is get factory files and restore phone back to stock and start over this should fix your problem. If you look around XDA you will find the files you will need ODIN being the main tool you will use to flash your phone.
Click to expand...
Click to collapse
that's new for me, what's "factory files" exactly ? different from firmware?
thank you for you time
hussam_qashu said:
that's new for me, what's "factory files" exactly ? different from firmware?
thank you for you time
Click to expand...
Click to collapse
no i just said factory file as in the firmware just return phone to stock using Odin and you should have a working phone. to start with again
The_Fallen_angel said:
no i just said factory file as in the firmware just return phone to stock using Odin and you should have a working phone. to start with again
Click to expand...
Click to collapse
already tried that, no luck
keep restarting.
Maybe motherboard issue ?
hussam_qashu said:
already tried that, no luck
keep restarting.
Maybe motherboard issue ?
Click to expand...
Click to collapse
You have flashed a stock firmware with stock bootloader etc. using odin and still stuck in a soft brick ? remember to wipe the phone a rule of thumb i use is to wipe the phone 3 times before i flash and 3 times after i flash. during the first boot up it may take a little time to boot as it must rebuild the cache. I dont think it is a motherboard issue i think you may have just flashed a wrong file that needs to be wiped out before continuing on. i have had this problem in the past with a galaxy s2 when i was developing custom roms for it. it took me a couple of wipes and factory firmware reflashes but i eventually got the phone back in working order. look here for the factory files you will need to re flash your phone with odin ----> https://samsung-firmware.org/model/SM-G925I/ also make sure you are using the latest version of ODIN you will to put your phone in download mode instead of recovery
Hi, could you fix it ?? I am facing the same issue.