First I had XXLPQ then I flashed siyah kernel v3.2.8 through CMW, I used it for like a day then everything started crashing so I just rebooted and then I got a bootloop.
I flashed XWLP7 it got stuck at the bootlogo(before animation screen) so I went into recovery mode and then it said "successful csc install (KOR)" something like that then I flashed siyah kernel v3.3.1 though ODIN, now I tried to change the CSC though the menu by using *#272*IMEI No# then it just never booted it just stays at the "Samsung Galaxy S II" the one before the animation screen.
I tried searching i found nothing similar...
I think its a boot loader problem, How do i flash a boot loader ?
pleease help
EDIT: I finally got it into download mode, now can someone please tell me whats the issue ?
bootloaders are roughly half way down 1st post http://forum.xda-developers.com/showthread.php?t=1075278
edit: if youve got it into download mode just flash a stock rom for now so you have a working device again
skimminstones said:
bootloaders are roughly half way down 1st post http://forum.xda-developers.com/showthread.php?t=1075278
edit: if youve got it into download mode just flash a stock rom for now so you have a working device again
Click to expand...
Click to collapse
Thanks yes as I said I flashed a new stock rom and kernel but no use anyway am gona flash a bootloader which I finally found here
I think there was an issue with the bootloader and kernel, i flashed the bootloader but it didnt work so I flashed a CF-root kernel and it finally worked .
Ba7rani123 said:
I think there was an issue with the bootloader and kernel, i flashed the bootloader but it didnt work so I flashed a CF-root kernel and it finally worked .
Click to expand...
Click to collapse
So now it boots past the Galaxy S2 screen? I have experienced that for 2-3 times now, same thing where everything started crashing and rebooting the phone will end up stuck at the bootscreen. What I had to do is to wipe data, dalvik, and cache then only it would work again.
It could be due to the particular ROM used as I have not experienced it after using the newer XWLPD for a few weeks now.
nanoronline said:
So now it boots past the Galaxy S2 screen? I have experienced that for 2-3 times now, same thing where everything started crashing and rebooting the phone will end up stuck at the bootscreen. What I had to do is to wipe data, dalvik, and cache then only it would work again.
It could be due to the particular ROM used as I have not experienced it after using the newer XWLPD for a few weeks now.
Click to expand...
Click to collapse
its a siyah kernel v2.3.8 issue where some files get corrupt, so even after flash v3.3.1 some files maybe corrupt also. So a full wipe is advised after backup.
Hoesntly I dont know but I think that its linked to the rom :/.
Ba7rani123 said:
its a siyah kernel v2.3.8 issue where some files get corrupt, so even after flash v3.3.1 some files maybe corrupt also. So a full wipe is advised after backup.
Hoesntly I dont know but I think that its linked to the rom :/.
Click to expand...
Click to collapse
No back then I was still using the stock kernel. Just rooted with ChainFire's method and that's all.
nanoronline said:
No back then I was still using the stock kernel. Just rooted with ChainFire's method and that's all.
Click to expand...
Click to collapse
Maybe a bootloader issue, see this thread it explains alot
http://forum.xda-developers.com/showthread.php?t=1457458
If u can boot to recovery then its fine but if u can only boot into download mode then u have corupption
Ba7rani123 said:
Maybe a bootloader issue, see this thread it explains alot
http://forum.xda-developers.com/showthread.php?t=1457458
If u can boot to recovery then its fine but if u can only boot into download mode then u have corupption
Click to expand...
Click to collapse
No I could boot into both recovery and download modes. Back then I tried flashing the same firmware and newer firmware but both still ended stuck at the boot screen. Only after I booted into recovery to wipe data, Dalvik cache and cache then it booted past the bootscreen and working again.
nanoronline said:
No I could boot into both recovery and download modes. Back then I tried flashing the same firmware and newer firmware but both still ended stuck at the boot screen. Only after I booted into recovery to wipe data, Dalvik cache and cache then it booted past the bootscreen and working again.
Click to expand...
Click to collapse
maybe some of the data was corrupt *-)
Related
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
x-timewinder-x said:
I followed the guide in the '[READ THIS]' thread and flashed a stock rom (i already tried about 10 different roms), but i still get a boot loop.
As i can enter the recovery and download mode without a problem and there never seems to be an error message after flashing i don't think that there is something wrong with the hardware.
Does anyone have an idea what i could do?
Also i somewhere read that you can fix pretty much any problem by using a riffbox.
Does any of you guys have any experience with that thing/ know if that could probably fix my problem?
Click to expand...
Click to collapse
In recovery did u try the:first clear cache and then wipe data/factory reset.After these reboot
Sent from my GT-I9100 using Tapatalk
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
x-timewinder-x said:
Yes, i already tried that.
In cwm recovery i also tried to format data,system and cache and flashed a new rom afterwards just in case.
Click to expand...
Click to collapse
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
JJEgan said:
All i can suggest is above formats plus format sdcard and format dalvik you will loose data but that looks lost anyway .
Flash an older stock rom via Odin from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
x-timewinder-x said:
Tried all of that, but i'm still stuck at boot loop
Does that mean the hardware is just broken?
Click to expand...
Click to collapse
Not necessarily.
Similar thing happened to me with KI8.
Was all good on KG1.
Flashed intratechs KI8 all good.
Flashed cfroot for KI8 had to factory reset to get root to work.
All was good at this point.
Flashed siyah 1.8 kernel all good.
CWM backuped.
CWM flashed % battery mod and stuck on Samsung logo at boot.
CWM restore still stuck at Samsung logo at boot.
Tried lots of things to fix but no go.
CWM restore of KG1 and all good again.
Still trying to work out what went wrong and will post the fix when/if I find out.
Sent from my GT-I9100 using XDA App
I have this problem too. For some reason, the only rom I can flash is Cognition 1.6 . The rest seem to just get stuck at the Galaxy S2 logo
Hey guys,
So i have my S2 for like 6 months now and never had any issue with flashing custom roms/kernels till yesterday. i installed XXKI4 and everything went perfect.
Few hours later i decided to flash CM7( wiped system,data,cache dalvik etc and flashed the zip 2x) so after this i rebooted my phone and it gave a bootloop. I was not able to boot in recovery mode so i had to reflash with odin to a stock rom. Well i did that and i was on stock rom again. i decided to flash the latest speedmod kernel, i flashed it and bam phone not booting, shows the Samsung Galaxy S II GT-i9100 text with the yellow triangle and its stuck at this screen for an hour now. i just cant use ANY custom kernel/rom on my phone because they all give bootloops and i want CM7 so bad. Any idea's and suggestions will be truly welcome.
Stock Samsung Roms are working great, but dont want that ;p
thx!
Coentje44 said:
Hey guys,
So i have my S2 for like 6 months now and never had any issue with flashing custom roms/kernels till yesterday. i installed XXKI4 and everything went perfect.
Few hours later i decided to flash CM7( wiped system,data,cache dalvik etc and flashed the zip 2x) so after this i rebooted my phone and it gave a bootloop. I was not able to boot in recovery mode so i had to reflash with odin to a stock rom. Well i did that and i was on stock rom again. i decided to flash the latest speedmod kernel, i flashed it and bam phone not booting, shows the Samsung Galaxy S II GT-i9100 text with the yellow triangle and its stuck at this screen for an hour now. i just cant use ANY custom kernel/rom on my phone because they all give bootloops and i want CM7 so bad. Any idea's and suggestions will be truly welcome.
Stock Samsung Roms are working great, but dont want that ;p
thx!
Click to expand...
Click to collapse
Have you done 2x flash in a row of CM7? its a know bug (but unknown reasons) it just dosnt start until you flash it 2x in a row.
Suggested method:
1. Enter ClockWorkMod recovery
2. Wipe data/cache factory reset
3. Wipe cache
4. From mount and storage menu, use Format System
5. From advanced menu, use the Wipe dalvik cache
6. Flash CM7 latest nightly
7. Reflash CM7 latest nightly
8. Reboot the phone
Not sure if this can help you, since you experience a problem that is not exactly the one i saw some times on forum (you cant even enter recovery mode after the flash) but this is how usually ppl makes CM7 work
Oh on a side note, i suggest to not use rom manager, it's confirmed (at least, from various posts here on xda) to not be really 100% working on our SGS2 and can cause problems.
If all this isnt working, it may be worth downgrade to KI3 or KH3 stock one, root again and then do the above system.
I can assure you 100% this system works over KI3 and KH3
yep you need to flash 2 x CM7.
First time it will flash very fast.
Go back to the stock rom and then install CM7 again
can you boot in CWM or are you getting some errors ?
Cangir said:
yep you need to flash 2 x CM7.
First time it will flash very fast.
Go back to the stock rom and then install CM7 again
can you boot in CWM or are you getting some errors ?
Click to expand...
Click to collapse
nah, this won't do it, believe me! coz i have exactly same issue with mine. I've done this countless number of times and nothing works... i just came to accept the fact that my phone doesn't support custom anything whether kernel or ROMs, until someone finds out the solution.
meanwhile you can try siyah kernel 1.7.8 or so, it worked with mine, see if it works with yours.
cheers!
henrychukx said:
nah, this won't do it, believe me! coz i have exactly same issue with mine. I've done this countless number of times and nothing works... i just came to accept the fact that my phone doesn't support custom anything whether kernel or ROMs, until someone finds out the solution.
meanwhile you can try siyah kernel 1.7.8 or so, it worked with mine, see if it works with yours.
cheers!
Click to expand...
Click to collapse
i know this problem, my phone was stuck at boot too but i flashed back to stock rom and i fixed my phone. my problem was i can't use cwm its was dead.
i already tried to flash cm7 like 10 times and it doesnt work i can only boot stock roms with the speedmod kernel other kernels give bootloop.
Ugh this is pretty frustrating, will try to downgrade to xxki3.
Btw, after i flashed Cm7 twice my phone bootloops, then when i flash a CWM kernel to boot in recovery mode i get Can't mount /cache/blabla. really weird, i have never seen this on a phone ! =)
Yay its working!! downgraded to XWKI4 and flashed the cwm kernel! now im running CM7! thx peeps! =)
For the other people that had problems, you have to flash the codeworkx kernel because cf root kernel has a modified CWM that is not compatible withCM7
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
teknoman17 said:
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
Click to expand...
Click to collapse
+1, i have the same problem.
Please Help
teknoman17 said:
i have almost the same problem,but me i can flash any rom,but the problem is with the kernel my phone refuses to boot on any other kernel else than cf-root and the speedmod,it freezes in the kernel loading so i must turn it off and reflash via odin cf-root or speedmod to get it works again.
Click to expand...
Click to collapse
Yes, its all the same problem, flashing a rom with a diff kernel won't boot up, will just be stuck on boot logo...
---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------
Phew! NOW I HAVE CM7 RUNNING ON MY PHONE!!
I'm gonna try to explain how i fixed my issue, as clear and explanatory as i can..
lucky i didn't brick my phone during all this, because I tried so many things and none worked.I unsuccessfully tried downgrading to XWkI4, ZCKI4, and alot others via Odin... after flashing all i get is tons of error messages(on 3e recorvery) E: can't open/cache or E:failed blah bla bla to load /efs... i thought OMG! my phone is bricked! then i recalled reading somewhere that flashing the 3 tar (PDA,MODEM,CSC) files usually should work(maybe better than flashing a 1 tar file), so i found a 3 files xxKI3 rom, flashed it and BAM! it booted up this time without any error. so now i went ahead and rooted it since the tar files came unrooted, then went into CWM to flash cm7 ROM, flashed it twice and ofc i got stuck on boot logo.....i didn't panic much, i pulled out the battery, and restarted to CWM where i cleared cache/ dalvik/ and did wipe/factory reset, then i reflashed CM7 again (twice) and it worked!!!! YES, CM7 is fiannly working on my SG2!
thanks for everyone for helping, and i hope this can help others in same boat as me..
abhigupta7 said:
+1, i have the same problem.
Please Help
Click to expand...
Click to collapse
+1 here also can only get the CF kernel to work. Any rom seems to work but only if the kernel is replaced with CF
andybarron said:
+1 here also can only get the CF kernel to work. Any rom seems to work but only if the kernel is replaced with CF
Click to expand...
Click to collapse
Try what i said and see if it works.
try the siyah 2.1.1 kernel,it solved my problem
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
with odin
cm9
stock ics
stock gingerbread
lightening rom
through cwm recovery mode
slim ics
thebyani
resurrection roms
dynamic rom
hydrogen rom
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
speedmod
phenominal extreme
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
if i flash a rom on my phone then binary count is not increasing but when i install a kernel then it increases. why so?
i can format ,mount ,unmount anything on phone but i cant format the user data or do a factory reset while doing that my phone hangs.
i even tried .PIT file with repartition ticked in the odin.
please tell me as if there is any hardware problem or just a normal problem?
now,
my phone says
cant access to /system/csc/SEK/system/'. in recovery
WHAT DOES IT MEAN ???
can any 1 help me?
Hey guys i got my phone working..
The problem was with siyah 3.1rc6.
It was emmc bug..
Motherboard has been replaced under warranty..
I flashed the official gb firmware and older bootloader ,then reseted my binary counts with usb jig...
shubham.dhand said:
hey guys please help.
i think i bricked my phone galaxy s2 i9100.
odin is working ,cwm mode is working and even downloading mode is working.
this problem happened after i flashed slim ics rom yesterday 29-4-2012 on my i9100. the main problem behind it is that i'm not able to factory reset the phone.
whenever i try to factory reset my phone in cwm mode or recovery mode,my phone hangs.
i can format my phone through system /format.
i can wipe cache ,dalvik cache and battery stats.
i flashed many roms and kernels but even after flashing any rom or any kernel in my phone ,it doesnt work.
i installed these firmware and tried so that my phone starts working -
cm9 ,stock ics ,lightening rom through odin
slim ics , thebyani , resurrection roms through cwm mode
kernels -:
siyah 3.1rc4 ,rc6, 3.1.2
cm9 remix
cf
but nothing is working..
after any thin i flash only see is the GALAXY S2 GT-I9100 logo on my screen.
please guys tell me a way out..
Click to expand...
Click to collapse
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
thanks buddy now i'm trying your advice.
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
now i'm doing as you said ,will tell you later that it worked or not..
thanks for your time and your valueable advice
yes my phome is i9100 and i waited for a long time.
Kaze105 said:
Reading the post, seems like OP did flash a stock file (although ICS, not GB).
2 dumb questions just to confirm. You have the i9100? not the i9100G? Also have you waited a certain amount of time after you flashed those roms? It can take up to a couple minutes for it to first boot.
If above are fine, (you have i9100, and you waited a long time and it was still stuck on i9100 screen)
Try the link below.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
shubham.dhand said:
i read this thread before writing this post but it didnt help.
the problem is that i can flash any thing on my phone but i cant factory reset my phone because of which my phone is not starting after flashing any rom or kernel.it just show the logo galaxy s2 gt-i9100.
Click to expand...
Click to collapse
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
i did that.
JJEgan said:
Factory reset is not required after flashing a rom .
You load rom via Odin it finishes install and then reboots itself .
You load rom via CWM and it goes to reboot screen yes and phone reboots .
As said a stock gb rom flashed via Odin preferably after a format of system data and cache should be your first step .
jje
Click to expand...
Click to collapse
i did as you said but it is not working.
i still cant format/data or factory reset before or after flashing/installing rom via cwm recovery or odin.
still the problem remains the same.i cant delete the user data or cant do factory reset
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Sun90 said:
wel u have a soft brick ma8 dont panic just dwnl a odin flashable stock GB rom and install the same
after that search the forum under samsung gs2 how 2 root ur phone with stock gb fallow the instructions and root ur phone
then select the ics rom like lightening rom and flash thru odin
every thing will be fine
Click to expand...
Click to collapse
when i flash gb rom then after flashin there is a installation process in the phone in which it says that cant open data/recovery_log. something like this.
it happens so fast that i couldn't read that.
yeah i gone through these threads.
aHcVolle said:
did you read this thread?
http://forum.xda-developers.com/showthread.php?t=1615058
maybe this will help you?
http://forum.xda-developers.com/showpost.php?p=25216762&postcount=22
Click to expand...
Click to collapse
but should i go for flashing my phone with the .pit file?
Nooooooooooooo wait wait wait,don't ever touch pit files and repatition
i would try it but i hope it won't make your problems worse ...
[edit]
ok then not ...
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
flash with odin a firmware with 3 file.
Inviato dal mio Transformer Prime TF201 con Tapatalk 2
kedai said:
Looks like you have siyah rc6. Make sure it's not from the 21st, iirc.
Don't factory reset just to be safe.. Restore your nandroid if possible and change to a later version.
Hope all goes well
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
yup i had siyah 3.1rc6 on my phone.
i tried to restore my nandroid backup but there is no effect on my problem.
how to know weather emmc is fine or currupted?
Try to mount it in CWM and connect it in linux computer and run fsck to check the eMMC. Windows chkdsk is no good.
And please try to remember, did you do this step: flash bad siyah rc6 then wipe/factory reset and get stuck?
if not, then the problem is different from those who flash bad rc6 (which is removed now and siyah is safe)
any thing is not working.
in every thread its written that if my phone goes in download mode and recovery mode then its soft bricked but then how can i unbrick my phone?
or is there any hardware problem?
i can mount and unmount every thing in recovery mode
i can format every thing but only user data cannot be formated,when ever i format/data or factory reset the phone hangs.
is there any other way of hard resetting i9100.?other than cwm recovery?
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Phistachio said:
Have you tried flashing with the .PIT? I doubt it'll work, since other people also tried it, but it's worth a shot.
Click to expand...
Click to collapse
yup i tried .PIT file too.
tried older bootloader also.but there is no effect on my phone
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
vladtdr said:
Every time i try to flash a custom rom the rom flases in 5-10 seconds and then phone reboots and gets stuck at samsung galaxy s3 GT-i9300 black LOGO. I can only flash a rom with odin. I have tried touch clockworkmod and simple latest versions and cfroot one also, and i have tried flashing from internal and external sd card...help pls
Click to expand...
Click to collapse
Flash another kernel ( SIYAH) with ODIN , then flash the rom you want to ....
didin't work...did the same thing:crying: i will try to flash an leaked official jb rom in odin as a base and then flash a custom one in cwm
Didn't work...please help
no one knows what to do?srsly? i want to flash custom roms...that is the hole point of android ffs
I would get a stock image from sammobile and flash the phone back to stock and start again.
vladtdr said:
Didn't work...please help
Click to expand...
Click to collapse
Don't panic,follow the steps:
1-Root e recovery with cf-root
2-download rom ( zip.packages) If you see any error messages or the procedure stops, then the packet of cooked rom may be corrupted.
Re-download and re-install from the beginning..
3-If the first boot takes more than 20-30 minutes, manually restart the phone by removing the battery or by pressing and holding for 10 seconds the power button.
If the problem persists, perform a hard reset .
4-If the phone restarts all the time, back in recovery mode and re-install, also performing the hard reset.
5-If your phone will not boot up, go into download mode and try to install a firmware via odin, performing a hard reset.
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Flash via recovery requires CF Root ,
ROOT
http://forum.xda-developers.com/showthread.php?t=1684535
Odin flash is much longer than 5 seconds and short flash is probably wrong file /faulty file .
jje
i have flashed cf root after flashing stock roms both jb and ics and it didint work...i tried to flash like 7 different roms in ics both based on jellybean and ics...i wiped all everytime...
vladtdr said:
i tried installing a stock rom then flashing over that i have installed a ics one and jb one...didn't work...the problem is not with the booting itself but with the flashing like i said every rom flashes in like 5 seconds...it tells me it;s done and everything went fine but when i reboot i can't get past the samsung logo before the boot animation, so practically the rom doesn't flash...i dont know why...odin works great....but i can't flash through CWM. I wanted to try TWRP recovery also but i can't seem to find one for the international version of SGS3...Please help:crying:
Click to expand...
Click to collapse
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
devid801 said:
I really don't think the ROM caused your recovery to not work correctly. Have you tried a different recovery, likE https://play.google.com/store/apps/...DEsImNvbS5mcmFnZ2VsLnJlY292ZXJ5ZXhlY3V0ZXIiXQ..
Click to expand...
Click to collapse
i will try this now and report back...and if it's worh mentioning, i had an s2 that did the SAME EXACT thing...i could never sort it out and i sold it...
this app did nothing just rebooted in cwm where it gave me an error...
vladtdr said:
this app did nothing just rebooted in cwm where it gave me an error...
Click to expand...
Click to collapse
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
devid801 said:
WHAT ERROR ? PUBLISH THANKS ....Also any errors from the recovery during the flash you should publish if there are .....
Click to expand...
Click to collapse
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
try using a different recovery
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
make sure phone is gt9300
GR0S said:
make sure phone is gt9300
Click to expand...
Click to collapse
zoot1 said:
Use a different/older recovery..if you are using touch version use the non-touch version of vice-versa..just flash the recovery tar file in Odin..
Click to expand...
Click to collapse
slaphead20 said:
try using a different recovery
Click to expand...
Click to collapse
I did all of that i tried CF-root recovery 6.0.1.2 touch and non-touch recovery and i am sure that my phone is the unlocked international version i9300...
vladtdr said:
it says that it can't flash the file and that a log file has been generated...ofc i am freaking out the hole point of android are custom roms and if i can;t install one owning an s3 is pointless...usually it doesent give error i told u guys it finishes like normal only problem is it takes5-10 sec..and then bam, the only error was with the app you sugested
Click to expand...
Click to collapse
There is some protection with some cwm that allow script only with ROM Manager
as you can see there is no error in the log, so i can't do nothing.
Now try to ADB Push a ROM to your phone.....
Hey guys,
yesterday i flashed the latest unofficial temasek rom, before that i had cm 10.2.
at first it worked fine, but afterwards i also flashed the latest gapps.
it lagged a bit so i did a reboot but then it stuck at loading screen. i mean it seemed like it boots but it didnt continue.
i tried to get in cwm and it took about 5 minutes to get there, it said cant mount data etc.
i wanted to flash the normal cm11 but there was an error and then it couldnt start anymore. no blue circle.
after several minutes i got in the cwm and tried to flash different roms, at first custom via cwm, then i tried to flash the stock via odin and
it said it was successfull, but it wasnt. it still stuck at loading but its not frozen, the animation works well.
i tried wipes and factory reset but it didnt help. the only thing that works well is download mode.
its a normal unbranded s3.
thanks for helping
Flash Philz recovery
Or flash stock rom via Odin .
JJEgan said:
Flash Philz recovery
Or flash stock rom via Odin .
Click to expand...
Click to collapse
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
kom4for2 said:
have already tried both, philz took also several minutes to launch,
and stock is "installed", stuck like every other room at booting screen
Click to expand...
Click to collapse
Dont wate ur time Go to download mode then flash stock rom...
danierakes said:
Dont wate ur time Go to download mode then flash stock rom...
Click to expand...
Click to collapse
like i already said. the last rom i flashed was a stock rom. but it didnt work..
it still stucks at the animation..
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Zizza said:
ensure that you wiped all data, cache and factory reset
clean wipe..this step is often omitted during installation.
Click to expand...
Click to collapse
wiped all data cache and did factory reset, nothing helped.
custom rom via cwm flashed and stock rom via odin, but it still doesnt boot...
its still stuck at the animation..
i wanted to try the 3 part flash but mostly its uploaded at hotfile, and hotfile was shutted down...
could anyone show me a working link? and whats that pitfile i heard in some forums?
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
JJEgan said:
Sammobile and samsung-updates for firmware or xda stock rom thread .
PIT will kill your phone if used in ignorance its all in the faqs and guides .
Recovery FORMAT sdcard system data cache .
Boot to download mode flash stock rom via Odin .
Try the Kies recovery method .
Click to expand...
Click to collapse
it finally works, but its quite instable. i took the battery out when it was still running, after that it couldnt start.
the only thing that work is the stock rom recovery, cwm or philz do not work...
i had to do the factory reset. but the only thing that doesnt work is
ok, there was a message called factory mode...
im trying to get a new stock..
kom4for2 said:
ok, there was a message called factory mode...
im trying to get a new stock..
Click to expand...
Click to collapse
Read the faqs .
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221