Hi, can somebody help me?
I installed the latest version of Lite'nin ROM today, and it uses the LP9 release with Netherlands CSC.
I would like to change the CSC to XEU (I believe that is UK/Europe unbranded).
I have tried various things, flashing hidden.img and cache.img from the sim free stock rom in MobileOdin, I downloaded the XEULP5 csc file and flashed it via Odin - but whenever I enter *#272*MYIMEINUMBER# I see KPN and cannot change it, no other options etc...
Am I doing something wrong, or can it simply not be done for some reason?
I would post in development, but not enough posts yet!
Related
Hi,
I have been struggling for a while to get my Tab back to a factory state. I flashed the KI1 stock rom but it is an Italian Rom. I then tried to flask KG7 which again was an Italian rom, so I changed the CSC using a CSC changing app from the Android Store, which successfully changed the CSC to XEU (UK).
The problem is that now when I try and connect to Kies it says that this version of the tab can't be updated (I guess this is because of the way I changed the CSC). I would REALLY appreciate it if someone could point me in the right direction of an official UK Rom for the P7500, so that it can be updated in Kies. It is causing me a real headache!
Thanks
Surely someone can help out with this? I just need a stock UK rom that can be updated using Kies!
not sure if this helps ...but sammobile has a list of firmwares to download, you could try the version you had before you upgraded to KI1
http://www.sammobile.com/threads/328-Samsung-P7500-Galaxy-Tab-10.1-Firmwares.
I had a version of KG7 - I tried flashing that one from samfirmware, but the CSC was Italian. I changed the CSC to XEU (UK) which worked, but the tab couldn't then be updated in Kies.
im one step behind! Flashed to KI1 and wanting to change.. I shall watch this post!
My S2 came from 'expansys online' and had the information below and no update in KIES.
PDA: XWKI4
Modem: XXKI1
CSC: OXAKI2 (SEB)
I changed the sales code to NEE by '*#272*IMEI#' and then KIES asked me to update to the following version.
PDA: XWKI8
Modem: XXKI4
CSC: OXAKI2(NEE)
Then I flashed stock firmware from Intratech's thred. But KIES said my phone cannot be updated by it. I check the information by '*#272*IMEI#' and there is just one work 'NEE' after 'sales code' and NOTHING SHOWN BELOW(before there were a list i can select). I thought I should have one 'XEN' to select at least but nothing.
The flashing should be successful because there were some apps with Dutch language.
PDA: XWKJ3
Modem: XXKI4
CSC: XENKJ1
At latst yesterday I flashed KK5 combination from Intratech's thred and succeed (with special apps like bbc i-player) but problem is still there. I cannot see any CSC to select by '*#272*IMEI#'.
KIES says the firmware 'I9100XWKK5/I9100XEUKH2/I9100XXKI3/I9100XWKK5' cannot be updated by it.
So anybody know how to solve it or who know which combination can be updated by KIES?
Anyone can give a help?
I dont really understand what you are trying to achieve .
Kies looks at Product Code and a few other codes .These are then matched against firmware on the Kies server . No match = no download .
Why vendor not updated
product Codes do not match any firmware .
Kies may not be able to match up the current codes on your phone .
You have a phone you changed its sales code
you updated then you flashed stock firmware then you flashed stock firmware again .
You want latest firmware then flash stock rom and flash relevant CSC to your location .
jje
JJEgan said:
I dont really understand what you are trying to achieve .
Kies looks at Product Code and a few other codes .These are then matched against firmware on the Kies server . No match = no download .
Why vendor not updated
product Codes do not match any firmware .
Kies may not be able to match up the current codes on your phone .
You have a phone you changed its sales code
you updated then you flashed stock firmware then you flashed stock firmware again .
You want latest firmware then flash stock rom and flash relevant CSC to your location .
jje
Click to expand...
Click to collapse
My question is why there is no CSC which I can select after I call '*#272*IMEI#'. There is just one word 'NEE'. No CSC list.
I flash XEU so I think at least there should be XEU CSC and the word should be changed from NEE to XEU. But the fact is not so.
And how to change product code?
You flashed the Frankenstein version of KK5 which is a combination that Intratech put together, and he placed it in the FRANKENSTEIN section, Kies will not recognize it, in order to flash with Kies, stay with stock roms/combinations.
The biggest question is why do you want to flash with Kies and with ODIN, pick one and stick with it, flash the CSC separately if you do not see it, or download CSC select from the market.
achillies400 said:
You flashed the Frankenstein version of KK5 which is a combination that Intratech put together, and he placed it in the FRANKENSTEIN section, Kies will not recognize it, in order to flash with Kies, stay with stock roms/combinations.
The biggest question is why do you want to flash with Kies and with ODIN, pick one and stick with it, flash the CSC separately if you do not see it, or download CSC select from the market.
Click to expand...
Click to collapse
what I most warry about is why there is no XEU displayed. After calling *#272*IMEI# just 'Sales Code : NEE' is displayed (sorry no image). Anyone whose phone just has non-multi CSC can show me your infromation after calling.
NYHGai said:
what I most warry about is why there is no XEU displayed. After calling *#272*IMEI# just 'Sales Code : NEE' is displayed (sorry no image). Anyone whose phone just has non-multi CSC can show me your infromation after calling.
Click to expand...
Click to collapse
Flash the CSC separately, then use the market app to select it, will reset your device though...
I have a SII which has been imported in to New Zealand, it was 2.3.4, with a SMO CSC
Locally there has just been a 4.0.3 upgrade avaliable, I've downloaded the VNZ (Vodafone NZ) and flashed it with odin.
The upgrade to 4.0.3 went great, but the CSC has remained at SMO, so now Keis is reporting that "your device does not support software upgrading via keis"
PDA: I9100XWLP7
phone:I9100XXLPS
CSC: I9100VNZLP2
I've tried the CSC changes, and this only give me the option of the SMO CSC.
Any idea on how to fix this, I would if possible like to have VNZ as the CSC
Greg
flash ur stock rom,its obivious tht the csc will change wat u expect man...an always hav a efs backd up....
wipe using code, after that if still doesnt change flash againusing odin and wipe again using code.
will work, iv seen ics requires twice flashing for csc fix, GB worked usually with one flash and wipe code
*2767*3855#
Essentially its make your mind up time Stick with Kies and official firmware or use Odin .
This attempt to mix and match does not always work .
jje
Does anybody know the three-letter CSC code for T-Mobile UK? I've flashed LF2 BTU but as that wasn't the orginal ROM (the original was PDA: I9300BVALE4 - CSC: I9300TMUALE4)
I want to know how to put it back completely to stock in case it has to go back for whatever reason, stupidly I didn't check what it was before I started flashing and changing the CSC.
Any help would be appreciated, thanks
Sorry to bump, but does anyone know?
ratsalad said:
Does anybody know the three-letter CSC code for T-Mobile UK? I've flashed LF2 BTU but as that wasn't the orginal ROM (the original was PDA: I9300BVALE4 - CSC: I9300TMUALE4)
I want to know how to put it back completely to stock in case it has to go back for whatever reason, stupidly I didn't check what it was before I started flashing and changing the CSC.
Any help would be appreciated, thanks
Click to expand...
Click to collapse
Its (TMU)
That's what I thought, but I can't seem to find that in any CSC installer which led me to believe that it was (or they used) something different.
If needed, the stock TMU rom can be found here:
PDA: I9300BVALE4
CSC: I9300TMUALE4
http://www.sammobile.com/firmware/?page=8&view=5174
Or you can download it with Chck Fus if you set:
Product Code to GT-I9300MBVTMU
PDA to I9300BVALE4
CSC to I9300TMUALE4
Phone to I9300BVLE4
I had trouble finding the stock T-Mobile firmware too and ended up downloading it through Check Fus the day before I spotted it on the SamMobile.com site.
Hope this helps
-P
Thanks for the links, I had got that firmware, what I'm struggling with is the three letter CSC code that matches that, if you get my meaning.
Thanks for replying though I appreciate it.
Not sure if it would help, but the specific CSC files for T-Mobile can be found in the cache.img inside the firmware file.
I just extracted the cache.img from the firmware file with WinRAR and then used Cache Ripper to unpack the img file
I've uploaded the zip file Cache Ripper spat out to MediaFire if anyone is interested *shrug*
http://www.mediafire.com/?p4iw15gxpw4xp5k
hmmm, the customer.xml gives the sales code as TMU, yet I've never seen that in any of the CSC install options or on the Multi-CSCs either.
unless I'm missing it somwhere.
thanks for the file though
Sorted it out I flashed the stock firmware ale4 checked the CSC with CSC checker and it was still BTU I then did a factory reset and checked again and it had changed to TMU. I now know how to put it completely back to stock if I need to
Thanks for your help
ratsalad said:
checked the CSC with CSC checker and it was still BTU I then did a factory reset and checked again and it had changed to TMU
Click to expand...
Click to collapse
Sorry to be a pain but what is CSC checker, an apk or pc app?
Regards
Jack
ooops hit thanks by accident then lol
Sorry I believe it's called CSC Select not checker
Here's the market link, it says it's for the Galaxy S / S2 but it works on the S3 too
https://play.google.com/store/apps/...sMSwyLDEsImNvbS5tYW5uaWFray5jc2NzZWxlY3RvciJd
Thanks a lot, just to compensate I thanked you too
Hi, first post, but have been using all the helpful info from the forums for 6 months now with my TF201, this is related to my new i9300. I'll try to be as descriptive as I can:
Black i9300 purchased last week in the UK, but currently has the TGY (Hong Kong) CSC code. I tried flashing to the UK JB ROM on Sammobile but came back with an unknown CSC error. Fair enough. I followed some instructions i found to get to BTU CSC code:
Flash back to BTU ICS
Flash BTU CSC package
Use Galaxy CSC changer to select BTU
Reboot, now with a fully working ICS build, and BTU CSC (I9300OXAALF2).
However at this point i wasn't able to find any official OTA updates and Kies told me that my device was not compatible with kies updates.
Flashed the original JB UK ROM I downloaded and now i'm back with the unknown CSC.
Any ideas? I've already tried flashing the CSC package onto JB and that's not worked, so now i'm really stumped. As far as I can tell i've removed all HK CSC codes from my device as it was happy as BTU with ICS...
Thanks