what does set on boot mean, do I need it checked?
Sent from my PG86100 using XDA
set on boot means the app will startup open boot and manually set the frequencies to what you have selected. It's not needed with most phones. I'm actually not sure if it is needed or not on the 3d, hopefully someone can chime in.
tammyjustin said:
what does set on boot mean, do I need it checked?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Of you want to keep the settings in SetCPU then check it... Although if there is a initscript it might change it back to the default just so you know
Sent from my PG86100 using Tapatalk 2
tammyjustin said:
what does set on boot mean, do I need it checked?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
if u have used other oc apps, prior to this one, u will need to wipe all data from the oc app, to stop it interfering with your new settings for the newer oc app
Related
Sent from my SGH-T959 using XDA App
Would like to know this too....every time I have adjusted the settings it would cause my phone to not wake up....
For now since I have it installed with auto-detect settings with no profiles added and it is fine. Used it to verify the 1.2g JAC kernel I installed.
Its not setup for the vibrant yet. The only way to successfully use it is with the auto setting and not using profiles.
Sent from my SGH-T959 using XDA App
DaSmittyman said:
Its not setup for the vibrant yet. The only way to successfully use it is with the auto setting and not using profiles.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Profiles work completely fine for me. Running 2.0.3 with all of them set to conservative. Never had a problem with SetCPU
Thanks for responding & info.
Sent from my SGH-T959 using XDA App
What do you guys use for your settings to get best battery life.
Sent from my SGH-T959 using XDA App
Most people are using 1200 max 200 min.
Sent from my SGH-T959 using XDA App
xplod420 said:
What do you guys use for your settings to get best battery life.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Max 1200, min 200 ...... DO NOT USE PROFILES, our phone can not handle them for some reason, regardless of ROM/kernel....also i would advise NOT checking "set on boot" as the majority of users have been experiencing problems where your settings will reset to dangerously low clocks....even if you uncheck it your settings will be preserved upon reboots
Do you use ondemand or something else.
Sent from my SGH-T959 using XDA App
xplod420 said:
Do you use ondemand or something else.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
gotta use conservative, sorry forgot to mention that
Thank you.
Sent from my SGH-T959 using XDA App
I use to be able to change my dpi by going to build prop and put.what ever I wanted but now I can't save it for some reason anyone know why.I'm on hboot 1.5
Sent from my PG86100 using xda premium
yneill said:
I use to be able to change my dpi by going to build prop and put.what ever I wanted but now I can't save it for some reason anyone know why.I'm on hboot 1.5
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I don't have such problem. Have you changed the permission to write the file?
You can also try pull the file out, altered it and push back again.
I change mine to 280dpi and only thing that is wrong is misalignment of dialpad, so I use Acontact instead.
yneill said:
I use to be able to change my dpi by going to build prop and put.what ever I wanted but now I can't save it for some reason anyone know why.I'm on hboot 1.5
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
when you are using root explorer, ensure you pressed the "r/w" button in the right upper corner.
Thanks that worked
Sent from my PG86100 using xda premium
Is this the same as using LCD density changer?
Sent from my PG86100 using XDA App
aznmode said:
Is this the same as using LCD density changer?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
yes
10 char
Why does my phone take so long to wake up I'm using venom Rom with zarbos kernel?
Sent from my HTC6435LVW using xda app-developers app
Low screen off clock speed I'm guessing.
Sent from my HTC6435LVW using xda app-developers app
I'm gonna have to agree with the low screen off clock speeds. Just reflash the kernel and up them. It should fix it.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Low screen off clock speed I'm guessing.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
i have it on 384 minimum clockspeed i leave the kernel at its defaults all the time i did reflash wiped the rom again matched md5 on both downloads and still my phone sometimes take forever to wake up when i click power!
snowman122 said:
i have it on 384 minimum clockspeed i leave the kernel at its defaults all the time i did reflash wiped the rom again matched md5 on both downloads and still my phone sometimes take forever to wake up when i click power!
Click to expand...
Click to collapse
Thats weird.. I am running CM with the same min clock speed and mine is instant. When I was on venom mine only lagged when I was using widget locker.
123421342 said:
Thats weird.. I am running CM with the same min clock speed and mine is instant. When I was on venom mine only lagged when I was using widget locker.
Click to expand...
Click to collapse
yeah thats what im saying on my rezound it was instant but on this phone viper is weird for me
Actually my bad my screen off is at 192 but the option to change it is greyed out how do I fix this!!
Sent from my HTC6435LVW using xda app-developers app
snowman122 said:
Actually my bad my screen off is at 192 but the option to change it is greyed out how do I fix this!!
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Reflash the kernel and make your choices for screen off there.
Sent from my Nexus 10
trickster2369 said:
Reflash the kernel and make your choices for screen off there.
Sent from my Nexus 10
Click to expand...
Click to collapse
Just tried that still didn't work and the choices I make don't stick. I choose stock speed no overclock but when i check in kernel tuner clockspeed is at max 1.8 and still takes forever to wake up. I am s-off and using clockwordmod
Sent from my HTC6435LVW using xda app-developers app
snowman122 said:
Just tried that still didn't work and the choices I make don't stick. I choose stock speed no overclock but when i check in kernel tuner clockspeed is at max 1.8 and still takes forever to wake up. I am s-off and using clockwordmod
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Uninstall kernel tuner and reinstall the kernel. Kernel tuner is known to mess stuff up.
Sent from my HTC6435LVW using xda app-developers app
Remove any cpu tuner because this kernel does not need it. Other ones do but not this one. Then reflash the kernel.
Sent from my HTC6435LVW using xda app-developers app
Bigandrewgold said:
Uninstall kernel tuner and reinstall the kernel. Kernel tuner is known to mess stuff up.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Yeah I do that too I learned hard from the rezound to uninstall it before flashing a kernel still a no go but ill just probably flash the stock viper kernel
Sent from my HTC6435LVW using xda app-developers app
snowman122 said:
Yeah I do that too I learned hard from the rezound to uninstall it before flashing a kernel still a no go but ill just probably flash the stock viper kernel
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
He's saying to uninstall it completely. Don't put it back on at all.
FWIW, I'm on Venom 1.2 and after trying a bunch of different set ups, what seems to work best for me is to simply uninstall all kernel managers and then install the kernel and run it "stock".
This has given me awesome battery life, no lag, and no boot issues.
If I change or refresh it acts normal but it won't be long and all my live wallpapers do this no matter what kernel I'm using
Sent from my HTC6435LVW using xda app-developers app
Did you change the screen resolution?
RLGL said:
Did you change the screen resolution?
Click to expand...
Click to collapse
Haven't changed it. It will flip for bout an hour then just does this I'm on the viper Rom
Sent from my HTC6435LVW using xda app-developers app
I believe that's GPU screen tearing. Are you overclocking or anything?
xlxcrossing said:
I believe that's GPU screen tearing. Are you overclocking or anything?
Click to expand...
Click to collapse
Nope no ocing if I change it when it starts doing that it'll be ok for a lil while then start again
Sent from my HTC6435LVW using xda app-developers app
Since you've tested multiple kernels try to wipe dalvik and cache and dirty flash your current version of viper. Something got messed up ROM side perhaps.
Also check the gpu rendering options in developer options. Mess with them and see if it changes anything.