[Solved] Flashed EVO to metropcs everything working except YouTube!? - HTC EVO 3D

Like title says everything work, but YouTube hits me with "unable to connect to server"
Any idea what's wrong ?
Sent from my 3evo on MetroPCS

If the web browser is working and can connect to a website, I think it's a problem with the youtube application.
See if the mobile site works. If it does, then it is a problem with the application.
Try reinstalling youtube from the market or updating it and seeing if it works again.

robdeezle said:
Like title says everything work, but YouTube hits me with "unable to connect to server"
Any idea what's wrong ?
Sent from my 3evo on MetroPCS
Click to expand...
Click to collapse
Maybe you should had flash to Boost. Metro data sucks balls, which is why I reFlashed to Boost after using Metro.

shook187 said:
Maybe you should had flash to Boost. Metro data sucks balls, which is why I reFlashed to Boost after using Metro.
Click to expand...
Click to collapse
I remember reading that Boost throttles data after x amount of data. Sprint decided to do this to keep data hogs under control but only for their Boost customers.
Sent from my iPhone with the bigger GeeBees.

I will give it a shot.
Sent from my 3evo on MetroPCS

robdeezle said:
Like title says everything work, but YouTube hits me with "unable to connect to server"
Any idea what's wrong ?
Sent from my 3evo on MetroPCS
Click to expand...
Click to collapse
You have to have wifi enable as well, log off your wifi router and enable your wifi i had the same issue.
Sent from my PG86100 using xda premium

YouTube will work better off wifi but you don't need it enabled to use it. Have you tried an older ver of the app?? Or a newer one ???
#Root_Hack-Mod*Always\

yes most sense roms need wifi on even if its not connected for youtubr idk why just turn on wifi but disconnect from your router

##3282# from the dialer on the Evo. You will get to the EPST settings. Click edit and then enter the MSL. It will prompt you for a password which is the MSL aka SPC.*Once you get past that, go to advanced > RTSP Proxy Address (for stock Gingerbread it's advanced > RTSP/HTTP Setting > RTSP Proxy Port). Make this 0.0.0.0 Also make the HTTP PD Proxy Address 0.0.0.0 Also change the ports for both of these to 0 Back out and you should be good.
YouTube should now be working. This is the process for cricket but it should have the same results for metropcs.
Sent from my Galaxy S2 Epic Touch

mexiking713 said:
##3282# from the dialer on the Evo. You will get to the EPST settings. Click edit and then enter the MSL. It will prompt you for a password which is the MSL aka SPC.*Once you get past that, go to advanced > RTSP Proxy Address (for stock Gingerbread it's advanced > RTSP/HTTP Setting > RTSP Proxy Port). Make this 0.0.0.0 Also make the HTTP PD Proxy Address 0.0.0.0 Also change the ports for both of these to 0 Back out and you should be good.
YouTube should now be working. This is the process for cricket but it should have the same results for metropcs.
Sent from my Galaxy S2 Epic Touch
Click to expand...
Click to collapse
im on cricket and that still doesnt work sometimes. It depends on the ROM idk why

On stock roms gb Rom it works. And sense 3.5 Roms it might not work. If you want sense 3.5 i recommend mik Rom. Had everything working when i had my evo 3d.
Sent from my Galaxy S2 Epic Touch

Thanks i appreciate your guys help alot.. in the end I decided to flash miui, I've used it all day on my og evo so I just went back to what I know. Still haven't checked YouTube though
Sent from my 3evo on MetroPCS

Related

metropcs web for eris

hi all few weeks ago i was looking for a way to surf the web on my eris and i had to take it to some one to set it up and he charged me $30 to put a shortcut on the home screen that say proxy settings but after the leaked 2.1 which unfortunately i installed on my eris instead of the rooted one i lost that shortcut so i did my researches and i found that if you download any cut from the market open it and go to New shortcut then Activity wait for the list to load scroll down to proxy settings open it and create a shortcut go bak to home screen and look for the proxy settings shortcut open it and for hostname use wap.metropcs.net and port 3128 click save restart and you be able to surf the web using the internet app
note:if you are connected to a wifi the internet app will not work in less you turn mobile network of and restart for that i have opera mini it will work on wifi but not on mobile so i use internet app for mobile and opera for wifi the rest of apps will work normal on wifi not on mobile only the mail app work normal on wifi and mobile use it to send and receive pix messages
also you must do the settings on ##7764726# and ##778# from @vzw3g.com to @mymetropcs.com for more information on that refer to these post http://www.howardforums.com/showthread.php?t=1466303
Do not skip any steps!!!!!
This works...
WAP
1: Goto settings -> Connections -> Connections
2: Remove any connections that are there
3: Open your phone and enter ##778#, select "EDIT" and enter your unlock code.000000
4: Set the following values:
M.IP Settings:
MIP_MODE = Simple IP Only
M.IP Default Profile:
NAI = [email protected]
Home Address = 0.0.0.0 (just delete the values and save)
Primary HA Address = 0.0.0.0 (just delete the values and save)
Secondary HA Address = 0.0.0.0 (just delete the values and save)
Security:
HDR AN AUTH User Id = [email protected]
PPP USER ID = [email protected]
PPP PASSWORD = metropcs
then menu and + save changes
Click to expand...
Click to collapse
so now only i need to set the mms to send pix because i receive picture messages but can't send
So what kind of speeds do you get from metropcs?
We have metropcs here in Tampa, FL but from what I understand it comparable to dialup speeds. :/
Yea same here in Dallas if I'm on 1x I get dialup but on some areas I get 3g
Oh you put s.ip dun user name as @dun.metropcs.com
You soul get 3g on some areas too
deseo said:
Yea same here in Dallas if I'm on 1x I get dialup but on some areas I get 3g
Oh you put s.ip dun user name as @dun.metropcs.com
You soul get 3g on some areas too
Click to expand...
Click to collapse
You'll need APN Backup & Restore (free from Market) to get your MMS working right. There's tutorials all over about what things need to be put in, but I just modify the 'Production' area in the xml file. Some people create/rename a whole area called 'metropcs'.
I've done this with Cricket. Good luck with Metro.
I have don it but not success
For mms
pkopalek said:
You'll need APN Backup & Restore (free from Market) to get your MMS working right. There's tutorials all over about what things need to be put in, but I just modify the 'Production' area in the xml file. Some people create/rename a whole area called 'metropcs'.
I've done this with Cricket. Good luck with Metro.
Click to expand...
Click to collapse
I have tried most possible solutions posted on the forums not just me but almost everyone whit eris on metropcs are trying to figure these out
HTC Eris Metro internet apps (other than main internet browser) to work on metroweb
I have the HTC Droid Eris all flashed from Verison to MetroPCS on Android 2.1 rooted, I have Web(on the default UI Sense internet browser. All I want is to be able to use Android Market and other Apps like Trapster (to detect speed traps) without using WI-FI. I want to be able to use these internet dependent applications on Metro's mobile data network. So far have been unsuccessful. Does anyone know the secret Metro PCS settings that will make this happen ? Any ideas?
I do the remote flash on the eris for either cricket or metro apps work /gps/market place/full internet pm me for details
ljm1715 said:
I do the remote flash on the eris for either cricket or metro apps work /gps/market place/full internet pm me for details
Click to expand...
Click to collapse
Why not share?
popetorak said:
Why not share?
Click to expand...
Click to collapse
yea he is looking to get every ones money as the guy that was charging 30 for web setup tha's why he don't share on till some of us find out how to do it
Is There a Way to Backup Your Metro Flash Settings?
I had my Eris flashed to Metro, but it wasn't syncing my contacts with Gmail correctly. People on these forums were saying that a hard reset would fix it. Tried that and of course all of my Metro Flash settings were wiped and my phone was reverted back to the original Verizon network. Is there a way to backup the Metro Flash settings or create some type of restore image, so I don't have to take it back to get reprogrammed every time I do a hard reset?
How do I know if I have all the APN setting correct?
brownewill said:
I had my Eris flashed to Metro, but it wasn't syncing my contacts with Gmail correctly. People on these forums were saying that a hard reset would fix it. Tried that and of course all of my Metro Flash settings were wiped and my phone was reverted back to the original Verizon network. Is there a way to backup the Metro Flash settings or create some type of restore image, so I don't have to take it back to get reprogrammed every time I do a hard reset?
Click to expand...
Click to collapse
Don't need to take to re flash just load the metropcs .prl and you set just dial *228 to reprogramor do the settings manually
challenge
what about internet and mms?
Thanks about this guide now I have internet and mms working fully. I would kiss you in rl for this guid seriously I spent like week searching and finally found.
Just a tip you can't have mms working without having internet working. You get internet working then edit mms setting with apn backup and restore.
code600 said:
Thanks about this guide now I have internet and mms working fully. I would kiss you in rl for this guid seriously I spent like week searching and finally found.
Just a tip you can't have mms working without having internet working. You get internet working then edit mms setting with apn backup and restore.
Click to expand...
Click to collapse
Did you get it working on metro Pcs? if so how did you edit the apn file? Im just getting into android and I have been searching for some time with no luck. Thanks
brownewill said:
I have the HTC Droid Eris all flashed from Verison to MetroPCS on Android 2.1 rooted, I have Web(on the default UI Sense internet browser. All I want is to be able to use Android Market and other Apps like Trapster (to detect speed traps) without using WI-FI. I want to be able to use these internet dependent applications on Metro's mobile data network. So far have been unsuccessful. Does anyone know the secret Metro PCS settings that will make this happen ? Any ideas?
Click to expand...
Click to collapse
Download APN Backup & Restore from the market.
Back Up your APN's.
Upload them here, so that other MetroPCS users can have MMS working properly.
You would be a hero.
Also, if you want to actually help people, you can do a nand backup, then turn your phone on and delete all of your contacts and information the best that you can, then do a nand backup again, and upload the second nand backup.
APN Backup & Restore is how you edit APN's. They're not REALLY APN's, they're just for MMS, on this phone.
##778 pw 000000 is how you edit most connection settings
iptables in the system is how you put EVERYthing through the proxy (need root)
and APN Backup (then edit it on a computer in a text editor) is how you can edit the APN's.
Make sure you DELETE before you RESTORE or it will just add on to the APNS already there.
here is the eris flash for metro/cricket enjoy...
www-megaupload-com/?d=PV7PQ9UI
change the dashes to dots..
Yes, get your custom ROM in there, and then flash the .zip (within this .zip) that is appropriate for MetroPCS.
It's all there, and it should work perfectly.

No data on Simply Honey 3.8 Revolution

Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
dbg17891 said:
Hey guys/gals. I just Odined Simply Honey 3.8 Revolution light to my phone but i don't have data. Wifi seems to work and i have tried rebooting the phone. Is there something I missed?
Click to expand...
Click to collapse
settings > wireless and network > mobile network > access point names > t-mobile
apn type: internet and mms
under access point names its blank. I can add a new apn but im not sure what all to add as far as proxy, port, user name, pass, server, ect...
edit: I got it to work thank you.
Also lost Data after flashing Wifi Calling app ...can't change settings in Mobile networks
think I've lost baseband...(whatever that means...basically phone won't recognize a sim card is loaded) is there a way to fix this without Oding ?
Does the phone say there's no SIM card inserted? If so, run to any T-mobile store and ask for a new SIM.
Also, I was having data issues two days ago. I keep a copy of the KB5 modem that's flashable in Recovery. Just re-flash and all was good.
T-mobile APN address:
epc.tmobile.com
Wish I could attach the KB5 file for ya, but I can't. Just search for it.
Sent from my GT-I9000 using XDA Premium App
i dont know much about apn?
but under my apn it says simple and under that
it says tmobile us
But simple is the one thats highlighted But when i try to select tmobil us it sends me to page with lots of info like proxy and port #etc...
I get data connection with simple but i think my data connection would be better with tmobil if i could get that to work.
anyone know how to do this????????? how do u fill out the apn page with what info do i put in?
or know wht simple means??????????
Apn type, wht do i put there?????

Help with issue mms pictures on EVO 3d on boost

My EVO 3d is flashed to boost mobile....but I'm having issues with the mms picture text...its not sending....can any please help?
Sent from my PG86100 using XDA App
try ##3282#/edit/advanced/mmsc change to mm.boostmobile.com then menu commit changes, reboot.
another option is to use gosms and settings/advanced/mms settings check apn and put the url there, skip proxy and set port to 80
im having the same issue, kinda, with my evo.. only i had it working so i know its my device being stupid
shizznizzle said:
try ##3282#/edit/advanced/mmsc change to mm.boostmobile.com then menu commit changes, reboot.
another option is to use gosms and settings/advanced/mms settings check apn and put the url there, skip proxy and set port to 80
im having the same issue, kinda, with my evo.. only i had it working so i know its my device being stupid
Click to expand...
Click to collapse
Actually it is
mm.myboostmobile.com
edit...damn this is an old thread
my bad, definitly put the "my".
also i said i had it working once, what i just discovered it has always worked.... just not on wifi. i can only send over the celluar network.
louforgiveno said:
Actually it is
mm.myboostmobile.com
edit...damn this is an old thread
Click to expand...
Click to collapse
LOL, answering a 6 month old thread is classic.

[How To] Fix T-Mobile Tethering

Alright guys. Just an hour ago I received a message from T-Mobile saying that they blocked my tethering and that I had to pay for that. Screw that. I found a way to fix it.
Prerequisites:
Rooted Phone on GB / ICS
Data Plan
Wireless Tether For Root Users app, download it from here.
New APN (For T-Mobile USA users)
We will create an APN (also works with MMS). Go to Settings -> Mobile Network -> Access Point Names. Press the menu button and press New APN. Type the following.
Name: T-Mobile US
APN: epc.tmobile.com
Proxy:
Port:
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Proxy:
MMS Port:
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: (leave this blank)
Click to expand...
Click to collapse
Press Save APN. After that, do the following.
1. Install the app.
2. Open WiFi Tether.
3. Press the Menu Button.
4. Click Settings.
5. Click "Change Device-Profile".
6. If you are on Gingerbread, choose your Actual Device!
6.1 If you are on Ice Cream Sandwich, choose "Generic ICS".
7. If you are on T-Mobile, Scroll down and MUST select "Routing Fix".
7.1 Depending on your Carrier, you may need to select Routing Fix.
8. Tether away! (Just don't go over your data!)
not working for me. Im assuming it only works on GB...i have ICS
asidrave said:
not working for me. Im assuming it only works on GB...i have ICS
Click to expand...
Click to collapse
Nope. It works on ICS. Make sure you select it after you saved it.
Sent from my HTC_Amaze_4G using Tapatalk 2
Didn't work for me. Even rebooted the laptop and phone. Tried USB and wireless both. Maybe I will google for "wap.voicetream.com/net" I remember years ago that worked... back when I used a Handspring Visor, LOL.
Don't know if it matters:
I have the "unlimited" 5G plan. I have a SGS4G phone, use Team Acid's ICBINB rom, and antonx's KJ6 kernel version 1.1.0. The phone is (of course) rooted.
Here are screenshots
I forgot to add that I usr wireless tether for root users. Not the built in hotspot.
Sent from my HTC_Amaze_4G using Tapatalk 2
hasoon2000 said:
Nope. It works on ICS. Make sure you select it after you saved it.
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
I did have it selected when i set it up. Tried it again...its working now. Im using the stock mobile hotspot.
Thanks for the help
I double checked the setings from your screen shot. Mine are the same, still no go. Deleted browser cache (Chrome) and restarted browser (again). No go. Tried "wap.voicestream.com" and "internet2.voicestream.com" still no-go.
I am using the hotspoy app that came with the team acid icbinb rom, which I believe is stock SS or Android. I will look on the market for "wireless tether for root users and see if that helps".
Hasoon did you try leaving everything blank except mmsc and apn? That's my current apn set up, I can't confirm the hotspot since I have the 5GB data with free tethering.
Dark Nightmare said:
Hasoon did you try leaving everything blank except mmsc and apn? That's my current apn set up, I can't confirm the hotspot since I have the 5GB data with free tethering.
Click to expand...
Click to collapse
Nope. I always used this set up on unlocked Android phones and it always worked.
hasoon2000 said:
Nope. I always used this set up on unlocked Android phones and it always worked.
Click to expand...
Click to collapse
I installed the Telus ICS update yesterday, put this in and for some reason, my data is connected, but it's like access isn't fully allowed, one minute it loads the page fine, then it suddenly says server unavailable, I tried the other thing I said and it works, I wanted to test the tethering with it though, since I as far as I can remember, my tmo apn settings had close to these settings.
Dark Nightmare said:
I installed the Telus ICS update yesterday, put this in and for some reason, my data is connected, but it's like access isn't fully allowed, one minute it loads the page fine, then it suddenly says server unavailable, I tried the other thing I said and it works, I wanted to test the tethering with it though, since I as far as I can remember, my tmo apn settings had close to these settings.
Click to expand...
Click to collapse
I don't know what to tell you lol. I used to work at T-Mo and I always used these settings for customers. Never had an issue with it.
hasoon2000 said:
I don't know what to tell you lol. I used to work at T-Mo and I always used these settings for customers. Never had an issue with it.
Click to expand...
Click to collapse
Lol got ya.
Dark Nightmare said:
Hasoon did you try leaving everything blank except mmsc and apn? That's my current apn set up, I can't confirm the hotspot since I have the 5GB data with free tethering.
Click to expand...
Click to collapse
Sorry, not exactly related to topic.
I was wondering, does 5GB data come with free tethering always or you were lucky to get it for free?
I have preferred Android plan.
Creating a whole new apn isnt necessary at all. This is already all over the forum =). All you ever have to do is delete everything out of the "apn type" field of the default apn like so -
https://www.youtube.com/watch?v=ZPaIpdSuCe0&feature=youtube_gdata_player
Why go through all the trouble when this method takes a matter of seconds and works like a charm on every single Rom I've ever tested it on? =)
Sent from my Turellular Amaze 4g using xda premium
ApokrifX said:
Sorry, not exactly related to topic.
I was wondering, does 5GB data come with free tethering always or you were lucky to get it for free?
I have preferred Android plan.
Click to expand...
Click to collapse
Nope. You gotta buy the tethering plan. T-Mobile doesn't believe in free lol
AndroidAutobot said:
Creating a whole new apn isnt necessary at all. This is already all over the forum =). All you ever have to do is delete everything out of the "apn type" field of the default apn like so -
https://www.youtube.com/watch?v=ZPaIpdSuCe0&feature=youtube_gdata_player
Why go through all the trouble when this method takes a matter of seconds and works like a charm on every single Rom I've ever tested it on? =)
Sent from my Turellular Amaze 4g using xda premium
Click to expand...
Click to collapse
Because it didn't work for me lol. I did my way and it worked like a charm.
hasoon2000 said:
Nope. You gotta buy the tethering plan. T-Mobile doesn't believe in free lol
Because it didn't work for me lol. I did my way and it worked like a charm.
Click to expand...
Click to collapse
Actually you are mistaken. Currently speaking, tethering comes automatically with the 5 or 10 gig options.
If you think t mobile pricing is unreasonable, you should try having service with Verizon, or any carrier not t mobile for that matter he he he =)
That's weird. It's worked for me on 6 different roms, and also worked for BOTH of my co workers on completely stock Amaze's. I think something may have been missed, but since your current method works I guess there's no point in figuring that out I guess =)
Sent from my Turellular Amaze 4g using xda premium
AndroidAutobot said:
... Currently speaking, tethering comes automatically with the 5 or 10 gig options.
Click to expand...
Click to collapse
Thanks a lot bro!
I was wondering is there any T-Mobile document about it?
The reason I ask: If I login to myTMobile, all I see is:
Services:
REQ Pref Android Web
Free Wi-Fi Calling
If I google for
t mobile tethering free
I get lots of variations on:
T-Mobile's "free" tethering ends with ICS upgrades...
ApokrifX said:
Thanks a lot bro!
I was wondering is there any T-Mobile document about it?
The reason I ask: If I login to myTMobile, all I see is:
Services:
REQ Pref Android Web
Free Wi-Fi Calling
If I google for
t mobile tethering free
I get lots of variations on:
T-Mobile's "free" tethering ends with ICS upgrades...
Click to expand...
Click to collapse
I can explain the "REQ Pref Android Web". There were 2 types Android data plans. (Now they just call it smartphone web or something like) One Req and an Android web. If you bought a phone on contract or did an upgrade, they added the Required data so you can't remove it. If you brought a phone in and wanted to activate or bought the phone outright, you are not required to keep the data and can remove it whenever.
It doesn't relate to the question, but just wanted to throw that out there lol.
hasoon2000 said:
I can explain the "REQ Pref Android Web". There were 2 types Android data plans. (Now they just call it smartphone web or something like) One Req and an Android web. If you bought a phone on contract or did an upgrade, they added the Required data so you can't remove it. If you brought a phone in and wanted to activate or bought the phone outright, you are not required to keep the data and can remove it whenever.
It doesn't relate to the question, but just wanted to throw that out there lol.
Click to expand...
Click to collapse
I got it.
I was explained verbally, I have unlimited plan throttled down after 5GB.
It's not the same as 5GB plan, probably.
I can see on TMO forums, people are talking about:
http://support.t-mobile.com/thread/25504?start=15&tstart=0
Only the $14.99 tethering plan and the very recent amendments to the 5GB and 10GB plans have explicitly allowed use.
To AndroidAutobot:
I was wondering, do you see tethering is included in your services list on myTmobile?

[GUIDE] HOW TO FLASH THE HTC EVO 4gLTE to Verizon Prepaid

I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Alright so before we start we need to get the tools.
Qpst
https://drive.google.com/file/d/0B2VIFL0RoIC8R253S2FjNkhPZXc/view?usp=sharing
Possible diag drivers
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
cdmaworkshoptool (if you need to get your msl)
http://code.google.com/p/cdmaworkshoptool/
DFS
http://cdmatool.com/
PRL 53000
http://forum.xda-developers.com/showpost.php?p=36946094&postcount=81
Verizon Messenger
https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit
activate your samsung gusto 2
On your evo turn on usb debugging, install apps, and airplane mode.
Install everything and make sure everything is running and connecting well. Connect your device to your computer and open up a dialer and type ##3424# to put it in diag mode
Open up cdmaworkshoptool read msl, change it to all zeroes, and write the prl then close it.
Open up qpst and use this method here to erase your meid and esn
reboot your phone and open dfs.
Plug both devices in and add their ports to dfs.
Send this password
Code:
2011101116083112
to the gusto2 in the pwd section
Send this password
Code:
41 74 64 77 61 6F 70
to the evo 4g lte in the cmd section
Then hit read in write just as in video
adb install verizon messenger or place it on your sdcard and install it
Turn off the gusto take the evo out of airplane mode and reset it
You'll have working 3g, mms talk and text.
HOW TO GET THE NATIVE MMS APP TO WORK
open up your build.prop with es file explorer and change the sprint parts to look like this:
Code:
ro.com.google.clientidbase.yt=android-verizon-us
ro.com.google.clientidbase.am=android-verizon-us
ro.com.google.clientidbase.ms=android-verizon-us
ro.phone.min_match=7
ro.product.model=EVO
ro.cdma.home.operator.alpha=verizon
gsm.sim.operator.alpha=verizon
gsm.operator.alpha=verizon
ro.cdma.home.operator.numeric=310004
gsm.sim.operator.numeric=310004
gsm.operator.numeric=310004
save and reboot then open your dialer and type ##data# hit edit type your msl
then change /advanced/rtsp/http settings to this
rtsp proxy ip
0.0.0.0
rtsp proxy port
0
http proxy ip
0000
http proxy port
8085
backspace out of there to advanced and hit mms server url change it to:
http://mms.vtext.com/servlets/mms
then change mmsc setting to
name
verizon
mmsc
http://mms.vtext.com/servlets/mms
mms proxy
not set (erase everything there)
mms port
8080
mms protocol
wap 2.0
back space out of there and enjoy mms. The weird thing is that you have to turn off wifi to send an mms
Notes
Go to mobile network and change network mode from LTE/CDMA to CDMA other wise you'll have network disconnect problems
Requests
Hit thanks button whenever you can
Pretty please with sugar on top I would like to get rid of the dfs situation entirely and it's not needed if you have a samsung intensity 2 as a donor if you have any coding abilities at all figure out why cdma workshop tool reads the intensity ppp and aaa incorrectly but reads the intensity 100%
Asadullah said:
I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Click to expand...
Click to collapse
thanks sooo much !!:good: will this get 3g data working?
evo401 said:
thanks sooo much !!:good: will this get 3g data working?
Click to expand...
Click to collapse
Yes before I forget this doesn't include mms but you can download verizon messenger from the market and it will work
Asadullah said:
Yes before I forget this doesn't include mms but you can download verizon messenger from the market and it will work
Click to expand...
Click to collapse
thank you! but how do you download verizon messenger from the market? i get this when i try online since on the phone googleplay wont even show it..
This app is incompatible with all of your devices. then the install is greyed out.:good:
Their $50 plan is geared towards the dumb feature phones. If you're running this plan with an android device, how long before they boot you?
stang04 said:
thank you! but how do you download verizon messenger from the market? i get this when i try online since on the phone googleplay wont even show it..
This app is incompatible with all of your devices. then the install is greyed out.:good:
Click to expand...
Click to collapse
I'll upload it.
gpz1100 said:
Their $50 plan is geared towards the dumb feature phones. If you're running this plan with an android device, how long before they boot you?
Click to expand...
Click to collapse
I've been on it for probably 6 months I don't hold anything back use data like I want haven't had any problems except from dealers making money flashing phones that want me to stop with my videos and tutorials.
HERE"S A LINK https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit it's on google docs
what was that command you typed in dfs. thats the only thing i need. thanks.
^^Good to know... sprint 3g still blows chunks out here.. vzw somewhat better. For my data usage, functional 3g would be more than enough.
This is something to consider for when my contract is up.
Thanks
Asadullah said:
I'll upload it.
I've been on it for probably 6 months I don't hold anything back use data like I want haven't had any problems except from dealers making money flashing phones that want me to stop with my videos and tutorials.
HERE"S A LINK https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit it's on google docs
Click to expand...
Click to collapse
thank you...
btw, if you flash roms on the lte, do you have to setup mms url ? or do you just install the verizon messenger? have you tested this messeger with an aosp rom? if you flash roms ofcourse.. thank you again, really appreciate it.
i subscribed in youtube.
jamesandadina said:
what was that command you typed in dfs. thats the only thing i need. thanks.
Click to expand...
Click to collapse
41 74 64 77 61 6F 70 is what you type in command but if you find something that will let you send this as spc "tdwaop" it's like a super spc that spits out more info
stang04 said:
thank you...
btw, if you flash roms on the lte, do you have to setup mms url ? or do you just install the verizon messenger? have you tested this messeger with an aosp rom? if you flash roms ofcourse.. thank you again, really appreciate it.
i subscribed in youtube.
Click to expand...
Click to collapse
I just install the verizon messenger since it takes over as default mms without issue
This one v has been whipping me
Also what prl did you use. Any Verizon prl I used always showed roaming. And I think 00001 prl is probably bout outdated by now. Thanks. I've had good luck with ltes on straight talk but need to go to Verizon cause steaight talk says I abuse data and I have to reflash with new donor and new number every month. Its getting annoying lol. Prl please lol. If you need any help with anything I might be able to help. I'm good at the s2, s3, and the mifi 2200. I don't do it as a business just family and friends I hook up for them lol
jamesandadina said:
Also what prl did you use. Any Verizon prl I used always showed roaming. And I think 00001 prl is probably bout outdated by now. Thanks. I've had good luck with ltes on straight talk but need to go to Verizon cause steaight talk says I abuse data and I have to reflash with new donor and new number every month. Its getting annoying lol. Prl please lol. If you need any help with anything I might be able to help. I'm good at the s2, s3, and the mifi 2200. I don't do it as a business just family and friends I hook up for them lol
Click to expand...
Click to collapse
do you know how to flash the epic touch to verizon prepaid?
Watch the new laws that go into effect tomorrow January 26th 2013 making it illegal to modify a cell to operate on another network. There is another link in this section for details.
Sent from my EVO using xda app-developers app
waterbound said:
Watch the new laws that go into effect tomorrow January 26th 2013 making it illegal to modify a cell to operate on another network. There is another link in this section for details.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
That only apply on new phones
Sent from my EVO using xda premium
The new law does not currently restrict this phones flashing please don't start this non sense also it has no purpose in the flashing of this phone to Verizon
what is the dfs 16 dig pass word for htc
Asadullah said:
I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Alright so before we start we need to get the tools.
Qpst
http://conflipper.com/Software/QPST_2.7_366.rar
Possible diag drivers
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
cdmaworkshoptool (if you need to get your msl)
http://code.google.com/p/cdmaworkshoptool/
DFS
http://cdmatool.com/
PRL 53000
http://forum.xda-developers.com/showpost.php?p=36946094&postcount=81
Verizon Messenger
https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit
activate your samsung gusto 2
On your evo turn on usb debugging, install apps, and airplane mode.
Install everything and make sure everything is running and connecting well. Connect your device to your computer and open up a dialer and type ##3424# to put it in diag mode
Open up cdmaworkshoptool read msl, change it to all zeroes, and write the prl then close it.
Open up qpst and use this method here to erase your meid and esn
reboot your phone and open dfs.
Plug both devices in and add their ports to dfs.
Send this password
Code:
2011101116083112
to the gusto2 in the pwd section
Send this password
Code:
41 74 64 77 61 6F 70
to the evo 4g lte in the cmd section
Then hit read in write just as in video
adb install verizon messenger or place it on your sdcard and install it
Turn off the gusto take the evo out of airplane mode and reset it
You'll have working 3g, mms talk and text.
Notes
Go to mobile network and change network mode from LTE/CDMA to CDMA other wise you'll have network disconnect problems
Requests
Hit thanks button whenever you can
Pretty please with sugar on top I would like to get rid of the dfs situation entirely and it's not needed if you have a samsung intensity 2 as a donor if you have any coding abilities at all figure out why cdma workshop tool reads the intensity ppp and aaa incorrectly but reads the intensity 100%
Click to expand...
Click to collapse
Hi, why do you put some password in dfs after the command for htc you didn't mention about it any where can you enlighten thank you
rockndrole said:
Hi, why do you put some password in dfs after the command for htc you didn't mention about it any where can you enlighten thank you
Click to expand...
Click to collapse
It unlocks more doors
Help please.
Asadullah said:
It unlocks more doors
Click to expand...
Click to collapse
I am having an issue with a recent flash. I followed directions in the video and was successful in flashing two Evo 4g to verizon prepaid using the Gusto 2. But...I seem to be stuck roaming to the sprint towers. How do I get the phone out of roaming please?
I spoke to verizon customer service this evening and they alerted me to this. I am sure this is what is causing me to have to dial phone numbers twice. I will dial a number to call, it will connect to an automated message telling me to dial the number again, and then it will connect.
Odd, and verizon will dump me for roaming like a feind.
Thanks for the guide and any direction you could send me for help.
I had the same issue it's mainly to do with the crappy radio in the device. So what I did is flash the rom.zip from the s-off site to get to 100% stock and then flashed the 53000 prl and haven't had any problems. I am still pretty much 100% stock just removed the bloat that comes with the phone.
Asadullah said:
I had the same issue it's mainly to do with the crappy radio in the device. So what I did is flash the rom.zip from the s-off site to get to 100% stock and then flashed the 53000 prl and haven't had any problems. I am still pretty much 100% stock just removed the bloat that comes with the phone.
Click to expand...
Click to collapse
Thanks for the reply. What is the s-off site to get the Rom you talked about?
Thanks mucho.

Categories

Resources