Related
Guide: How to fix a bricked SGSII from failed flash, no recovery & no usb recogntion
Now Fixed. - Thanks: Below is the guide to how I broke and fixed it with a little help from my XDA Friends. Maybe the MODS could sticky it as a unbrick guide to go alongside the rest?
So I was flashing a ROM through Odin as per the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1075278
The flash failed and when I restarted my phone I was left with the following:
1)No Access to Recovery Mode through Vol Up + Home + Power
2)Access to Download Mode through Vol Dwn + Home + Power
3)PC would recognise a device was connected on any USB port but kies or Odin Could not detect the phone
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
The Cure:
1)Uninistal and Re-Install Kies and Samsung Mobile Device Driver
2)Pureley by accident left my phone connected on flash screen of death through the process and on loading ODIN it connected perfectly right away
3)Set PDA to ROM and flashed.
4)Reflashed as per normal routine again due to boot loop this time in download mode.
5)Factory Reset via Recovery Mode to force CSC update to match ROM
6)*When it arrives use USB jig to re-set flash counter to 0*
Step 2 is not advised as goes against what all the instructions say, please try download mode before this method I don't know if it was just luck I didn't further mess up the phone, but to be honest bar screwing my IMEI it couldn't get much worse! And as I said I found it by accident and it worked. Don't know if anyone has an explanation. From the message on the screen and what I read on Kies ref the emergency recovery I think this is a kind of emergency download mode for when stuff goes wrong as it hints kies can fix it from this screen.
I tried to flash the 02 2.3.5 file from the carrier branded thread, followed all instructions. File was a .tar.md5 i left as is as per instructions.
the flash failed when the phone powers up i get upgrade failed, I can get to download mode but odin doesn't recognise the phone as being connected ive tried multiple usb ports
kies also wont recognise it
i cant access recovery mode
is there any way back?
ive read most of the other posts but don't seem to be getting anywhere other than fustrated!
In kies there's an option to install drivers, try that first and see if it'll find the phone again.
kies
no joy that root, the pc knows its there as every port i plug into it wants to install drivers for device and does so
Remove Samsung Kies from phone and reinstall it and try again .
jje
Cheers will report back, what i don't get is why i cant get to recovery mode would make things easier! Can a jig do this? If i try i just get the failed update screen
I also get same. Screeb when plugged into charger does thos mean its not even charging?
Sent from my X10i using Tapatalk
My god you guys are amazing! Uninstalled reinstalled kies then conected phone not in download node but on the failure screen odin connected right away and flashed perfectly its alive again thnx sooooo much
Sent from my X10i using Tapatalk
Jig ordered jig worked one reset flash count
Sent from my GT-I9100 using Tapatalk
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
cyberspaceguy said:
my phone doesn't turn on anymore...and my jig doesn't work to turn on it in download mode... battery is full I check it with tester voltage. Can somebody help me??? my phone is die!!!!
Click to expand...
Click to collapse
Service Centre .
jje
DAMN
I really wish I saw this 2 weeks ago
Its stuck in the warranty repair centre, I dont expect it to be fixed, so will try this soon when it comes back !
Lol i spent ages reading multiple posts about bricked phones nothing seemed to be working do asked, someone suggested the kies reinstall, then by accident i deviated slightly from instructions in terms of not disconnecting phone and leaving it on brick screen and it happened to work
Alot of people flame for posters asking previous questions but these guys were really helpful to me.
Ask and xda will provide
Sent from my GT-I9100 using Tapatalk
this just happened to me..luckily sprint gave me a new phone after 2 days for no charge at all..
Odin was not recognizing my phone... than I followed your instructions and unninstaled kies and samsung usb drivers.
turned usb debbuging mode ON...
turn off phone
put the phone in download mode (hold volUP, home, power)
AND WHEN I INSTALLED KIES WITH THE USB PLUGGED IN THE PHONE, WINDOWS INSTALLED THE DRIVERS AND I FLASHED THE FIRMWARE I WANNED WITH ODIN
MANNY THANKS
Glad it worked hopefully this will get sticky
Sent from my GT-I9100 using Tapatalk
4)when phone started or attempted to be put into rec mode just a splash screen saying firmware upgrade failed and a picture of a phone and pc with a yellow warning triangle.
Click to expand...
Click to collapse
On that screen, the phone is effectively in Download Mode already.
Just connect Odin and flash away, did it on my phone a lot of times already (I sometimes forcefully enable this screen manually - don't ask why - and always flashed directely from there.)
Thanks for that i didnt realise till after I'd flashed that this was still download mode, i was still in flappy panic "dude i bust my phone " mode. Still trying to find out why windows ****s up the drivers when the flash bins out
Sent from my GT-I9100 using Tapatalk
Why don't people use mobile Odin?
Sent from my GT-I9100
Hi guys, hoping someone can shed a little bit of light on my issue.
Rooted my phone- all went fine!.
Went to install CWM and all i got was the e3 recover telling me:
Failed to verify signature.
Instillation failed.
So after a little bit of messing about i decided to just leave it and continue on with my day. My phone then ran out of battery. I put it on charge without turning it on and came to find the phone in recovery mode with a fully working version of Clockwork MOD, suprising to say the least. I rebooted the phone and then tried to reboot back into recovery mode, and since then my phone wont load normally or into recovery past the samsung logo.
I dont know what to do because although my phone will go into download mode, it will not work with ODIN, i simply get the message "failed to open serial port."
So i have a phone that wont load recovery, wont load normally, and wont let me install kernals etc through ODIN, please someone help me!
Any help would be great, thanks people.
Hi
I'm new here & have been reading many threads in preparation before rooting my phone.
Its sounds like your phone is stuck in a boot loop, if so read this tread & it should help you out. (sorry if i got it wrong)
http://forum.xda-developers.com/showthread.php?t=1108499
peace
The above solution will not work for you, because your have no recovery.
How did you root your phone? To summarize:
1. You rooted your phone.
2. You tried flashing CWM (why?)
3. Flashing failed and you have no recovery anymore?
4. Odin does not recognize your phone anymore.
Correct?
Try a different USB cable to make sure it isn't the cable.
Have you stopped kies on your computer before running odin?
Sent from my GT-I9100 using XDA App
I had the same problem get into Cwm the way you'd get into normal Android recovery so hold vol up + home + power then when the boot screen pops up let go for a millisecond then repush vol up + home + power
Sent from my GT-I9100 using XDA App
Your phones only bricked if it wont turn on mate. Relax as its most likely fixable. Do as others have suggested and disable kies as its a pain in the backside. Kies doesnt like odin and will crap it up. Install a kernel like chainfires; get into cwm and wipe everything. Dalvik, cache, system. Get a usb jig off ebay for gs2 if you can as thats helped me out. I only use Siyahs kernel or Chainfires as they are the most stable. Good luck.
Sent from my GT-I9100 using Tapatalk
Hello everyone,
My Galaxy Tab 10.1 GT-P7500 is stuck in a boot loop which only shows "Samsung Galaxy Tab 10.1" on screen. I've tried pressing the power button to power down the device, but the screen will just go blank for a while and then the "Samsung Galaxy Tab 10.1" will show again. There is no way for me to go into download mode.
Any way to solve this problem?
I've tried and tried and finally got into download mode, used Odin to install a kernel. Everything runs OK, until it reboots. Then I see the logo again for awhile, suddenly it powers off, then unable to switch on anymore. I think the battery is dead, will try later after it is charged up.
Nobody seems to care about the issue I've face.
Anyways, been trying out all the solutions that I can find all around XDA, it turns out only "restocking" can solve my problem.
Re-flashed my tablet following the guide at Team Overcome's site.
Maybe these instructions will help
a while ago i got my tablet stuck in bootloop... after a lot of research... i fixed it and put the step by step here: http://forum.xda-developers.com/showthread.php?t=1329261
Let me know if it helps!
You should get a USB jig. It'll jump you into download mode. Unless that tablet doesn't use the mini usb... Which it might not. If you have a custom recovery on there, then wipe data, then install a new ROM
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Bootloop and recovery will not work...
damastah said:
You should get a USB jig. It'll jump you into download mode. Unless that tablet doesn't use the mini usb... Which it might not. If you have a custom recovery on there, then wipe data, then install a new ROM
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Hi - will a "USB jig " help me with my problem, or do you have any Suggestions?
I was flashing stock 4.0.4 ICS via Odin and unfortunately I walked away from my computer for a quick minute ... and my 3 year decided to unplug the tablet. I previously had CWM v.5???? - now I can see the download screen, then get to the OS warning screen.
Then when it says to hit volume up to continue and down to cancel ... I hit volume up and it goes into bootloop and when I hit down it goes into download load but Odin doesn't recognize it.
Note : I have to hit the opposite volume to even get into download mode.
Any ideas or help would be greatly appreciated.
if im not wrong you can restore with kies, emergency firmware ....... or something like that, did you try?
Hey guys,
I tried upgrade to ICS via Kies and the upgrade failed and the phone stopped rebooting. So, I tried to do a recovery via Odin but instead of clicking the PDA button and flashing, I click the Bootloader button and flahed. Now I can't enter the download mode and the phone just keeps rebooting. Is there anything I can do to get into the download mode?
Thanks
Might be a chance that a jig could work. If not, JTAG or Samsung service center.
Thanks
I guess it's time to upgrade to the SIII then....
messing wiv the bootloaders is dangerous i think ,phone needs service center now...
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
crazy_android said:
If you’ve hard bricked your Galaxy S2 (and can’t get into download mode) or you want to reset the ODIN download counter (so no one will no you’ve rooted your Galaxy S2), or you just simply
want to remove the i9100 splash screen, you can make a USB jig to solve all your problems.
Click to expand...
Click to collapse
Actually, a usb jig won't recover a hard bricked device. His device does boot up so it's not a hard brick and there may be a chance.
Sent from my GT-I9100 using xda premium
The device sounds fine, just seems like you're not getting the button combo done quick enough or correctly. Pull the battery first, if it boots into a loop instantly, hold the combo while inserting battery.
using a jig will be a good idea
I should mention that it only starts booting up but never actually goes past the boot up screen. The blue bar stops almost at the end and doesn't go any further.
So, I got a usbjig today and was able to enter the download mode but all attempts to flash through Odin have failed...
Any suggestions?
Without seeing the log from Odin (you could always upload a screenshot; but it probably won't make a lot of difference), hard to say definitively. But being a betting man I'd wager the NAND is completely stuffed therefore service centre job.
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------