[Q] Flashing Samfirmware via ODiN HELP!!! :( - Galaxy S II Q&A, Help & Troubleshooting

Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys

---

Extract the zip, you'll be able to find the needed files there.

---

curodot said:
Extract the zip, you'll be able to find the needed files there.
Click to expand...
Click to collapse
Theres just one MD5 file?

---

AntAust1513 said:
Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys
Click to expand...
Click to collapse
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.

---

bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?

---

AntAust1513 said:
bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?
Click to expand...
Click to collapse
Reading fail.

---

ctomgee said:
Reading fail.
Click to expand...
Click to collapse
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help

---

AntAust1513 said:
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help
Click to expand...
Click to collapse
go ahead and flash , and do please take some good time to read .

---

bala_gamer said:
go ahead and flash , and do please take some good time to read .
Click to expand...
Click to collapse
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.

---

AntAust1513 said:
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.
Click to expand...
Click to collapse
|Yes the dont post yet another bootloop post at the top of the page .
jje

---

WINNING. Sorted

---

XmitData fail
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.

---

dabnis said:
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.
Click to expand...
Click to collapse
Are you sure you are flashing the right ROM for your device?
I9100?
If yes:
Try this and/or this(unbranded 4.0.3 recommended).