my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
DevonSweeney said:
my s6 edge is bricked from failed root and when i try to install firmware i get this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I also tryed to root my phone and now im also stuck with this error message when i try to fix it.
Witch Rom do you come from and witch Rom do you try to flash ?
edzamber said:
Witch Rom do you come from and witch Rom do you try to flash ?
Click to expand...
Click to collapse
well, im kinda a noob at this stuff so im not sure, but if you meant what firmware then its 5.1.1,
add me on skype if you would like to help me more please "@[email protected]"
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
edzamber said:
I think you have try to flash a Rom with old bootloader, thats why odin fail at Sboot part (bootloader). Try to dl and flash last Rom for your device (at least COI9).
Sorry, no Skype user...
Click to expand...
Click to collapse
Im sorry but that makes no sense to me, is there a way you can give me a quick tutorial, i am a noob
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
edzamber said:
Ok, no worries
What is your S6 edge model (g925f, g925i...)?
Click to expand...
Click to collapse
SM-G925F
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
edzamber said:
Great, witch location/region ?
I mean witch country ?
For exemple, I'm on G925F France.
I need this information to give you a link...
Click to expand...
Click to collapse
SM-G925F Northern Ireland
But Northern Ireland Is Kinda Part Of The UK
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
edzamber said:
Ok.
I think you have to install last UK COI9.
Here is link to dl on Sammobile.com. If you havn't an account, register for free to dl.
http://www.sammobile.com/firmwares/download/57658/G925FXXU3COI9_G925FBTU3COJ1_BTU/
Then, extract firmware zip with 7zip on your Desktop.
If there is only one file, flash it into AP
If there is 4 files :
BL file in BL
AP file in AP
CSC file in CSC
Modem file in CP
Let me know
Click to expand...
Click to collapse
can i use winrar? and can you link me to odin, an odin which you would use please?
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
edzamber said:
Yes Winrar working too.
Here is Odin i use :
http://www.mediafire.com/?x3lefbe2uu8hv8f
Click to expand...
Click to collapse
thanks so much for the help so far, lets hope it works!!
You're welcome.
Let me know
edzamber said:
You're welcome.
Let me know
Click to expand...
Click to collapse
so i just put my phone into download mode, add it to odin.
then load the file inside the zip file into the AP?
correct?
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
edzamber said:
* Extract Rom file.tar.md5 from Rom zip on your desktop with Winrar
* Open Odin as administrator
* In case of one single AP file, clic on AP into Odin and add AP file to load in
* Wait until odin load AP file
* Start in Download mode
* Plug usb cable
* When you see a number under COM into odin is add, clic on Start
Click to expand...
Click to collapse
ODIN said that it passed, but now it only turns on when plugged in and when it is plugged in it is stuck in a sequence of: samsung s6 edge logo, blue screen with android logo, turn off. and then repeats over and over, i am able to go into download mode though
Go in recovery and wipe factory reset.
edzamber said:
Go in recovery and wipe factory reset.
Click to expand...
Click to collapse
i cant get into recovery mode i dont think, i can only get into download mode. And i cant turn it on when it isnt plugged in and i cant turn it off when it is
UPDATE: got into recovery mode and factory reset. thank you so much, your a lifesaver! if i get money in the near future i will be donating!!!!
Related
Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys
Extract the zip, you'll be able to find the needed files there.
curodot said:
Extract the zip, you'll be able to find the needed files there.
Click to expand...
Click to collapse
Theres just one MD5 file?
AntAust1513 said:
Hi guys, i have an i9100p currently runnning custom rom and i would like to flash the stock ICS rom from my carrier (orange) i downloaded Odin and the rom itself from samfirmware and also the flashguide for some help. the flashguide mentions putting each file in the correct place but this rom file only has 1 file(a ZIP file) also do i need to re partition etc.. i have looked elseware on XDA but only seemed to come across the guides where there is the Phone modem and CSC but as i have none of those files, i really need help... thanks guys
Click to expand...
Click to collapse
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?
AntAust1513 said:
bala_gamer said:
if it has only one big file then put in PDA section and flash, leave all the others to default values before pressing flash.
Double check the rom you have downloaded. People often flash i9100 roms to other variants.
Click to expand...
Click to collapse
thanks for your help! .. do i need to tick re partition or auto reboot or anything?
Click to expand...
Click to collapse
Reading fail.
ctomgee said:
Reading fail.
Click to expand...
Click to collapse
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help
AntAust1513 said:
just being sure, i bricked my old phone using odin a while ago so im cautious thanks for all your help
Click to expand...
Click to collapse
go ahead and flash , and do please take some good time to read .
bala_gamer said:
go ahead and flash , and do please take some good time to read .
Click to expand...
Click to collapse
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.
AntAust1513 said:
Yeah yeah i think im in bootloop (its been about 5 minutes) any ideas? its a stock from for my phone.
Click to expand...
Click to collapse
|Yes the dont post yet another bootloop post at the top of the page .
jje
WINNING. Sorted
XmitData fail
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.
dabnis said:
HI Guys, Flashing the ROM via Odin I get the following error:
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> boot.img.md5
<ID:0/011> NAND Write Start!!
<ID:0/011> recovery.img.md5
<ID:0/011> system.img.md5
<ID:0/011> __XmitData_Read ..
<ID:0/011> XmitData Fail..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have searched the net and unable to get any related issues, please help.
Click to expand...
Click to collapse
Are you sure you are flashing the right ROM for your device?
I9100?
If yes:
Try this and/or this(unbranded 4.0.3 recommended).
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
so you tried to flash a pit file?
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
sleepingsword said:
Just noticed my phone was on the Samsung boot screen, it was just sitting on my desk I wasn't even using it.
The phone was only rooted via Odin about a month ago, using a stock 4.1.1 rom (Norway, Telenor)
I managed to get into the Odin mode so I can try ans re-flash the stock rom hoping this may fix it.
I could only find this ROM (which is a norway telenor 4.04 rom)
I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5
My question is about why Odin fails, here is the message;
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300TENBLF1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
is the fone borked?
Click to expand...
Click to collapse
I just manged to help others over this soft brick problem, by flashing one of Darkys roms !!
Just find your country/region dl it and flash following his instructions
http://www.darkyrom.com/index.php?forum/#rom-darkyrom-iii-i9300.122
---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Sammy rom wont solve the problem - Darkyrom will :laugh:
Glebun said:
so you tried to flash a pit file?
Click to expand...
Click to collapse
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
xSpeced said:
Flash the stock FW from sammobile and leave all the ODIN checkmarks as it.
Click to expand...
Click to collapse
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
sleepingsword said:
Nay, didnt have much luck finding one, can you give me any pointers to finding it?
Tried again but still have this ''<ID:0/004> There is no PIT partition.'' error
Click to expand...
Click to collapse
Are you blind ??
Stock wont do, Darky will!
Get CWM again do this>
*Installation
1. Download Odin3 and CF-Root-SGS3-vxx.zip
2. Power off your phone
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
Now you successfully installed CWM + Super User + CWM Manager.
spoonymoon said:
Are you blind ??
Stock wont do, Darky will!
Click to expand...
Click to collapse
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
sleepingsword said:
Help me see...
Darky guides say I need to install CWM first but ODIN still says there is no PIT partition when I try to install it...
Click to expand...
Click to collapse
Look one post above
spoonymoon said:
Look one post above
Click to expand...
Click to collapse
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
sleepingsword said:
I think you misunderstand me, look at that CWM guide you gave me, it says use ODIN for flash CWM
but when it try to flash CWM via ODIN i get the same error: <ID:0/004> There is no PIT partition.
Click to expand...
Click to collapse
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whitout reparation) thats all
Link>http://speedy.sh/kcqvD/CF-Root-SGS3-v6.2.tar
spoonymoon said:
No you dident read properly
3. Boot into download mod (Press vol down + Home + Power on)
4. Unzip CF-Root-SGS3-vxx.zip. You need to end up with a .tar file, dont extract .tar file.
5. Open Odin
6. Select PDA as CF-Root-SGS3-vxx.tar
7. Connect the phone to your computer
8. Make sure that re-partition is not ticked
9. Click Start Button
10. Wait for phone to reboot.
You must flash the excracted tar file in PDA in Odin (whiteout reparation) thats all
Link>http://speedy.sh/kcqvD/
Click to expand...
Click to collapse
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
sleepingsword said:
as i said, trying to add the file CF-Root-SGS3-v6.2.tar give this result
Code:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
spoonymoon said:
then tick re-partition and try again
edit- whitch odin version are you using? gotta be 1.85
Click to expand...
Click to collapse
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
EDIT:
tried this PIT file: GT-I9300_mx_20120329
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sleepingsword said:
I need a PIT file for re-partition, i cant find one on the forums...
I have tried both ODIN versions 3.04 and 1.85
both say the same no pit partition.
this is looking like I will have to try and get a replacement from Samsung...
Click to expand...
Click to collapse
Try Odin v.3.07
dont work
Not sure but think , its possible a corrupted emmc !
But flashing a wrong pit file could make things even worse - lets investigate a bit more ?
Try latest odin 3.07
Btw: its a long shot but try flashing whitout external sd - remove it first
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Damm sorry to hear br0
And you're welcome
TRY THIS COULD WORK
http://www.androidauthority.com/galaxy-s3-gt-i9300-clockworkmod-recovery-6-0-1-0-install-103347/
sleepingsword said:
same result with Odin 3.07, no PIT partition...
so I found 3 PIT files.
GT-I9300_mx_20120220
GT-I9300_mx_20120322
GT-I9300_mx_20120329
alas none work, ODIN 3.07 just hangs on <ID:0/003> Get PIT for mapping..
this happens if i select any .tar file (CWM or Sammy Firmware) with the PIT file, or Just the PIT file on its own....
its dead Jim....
Thanks for trying to help me Spoonymoon
Click to expand...
Click to collapse
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
painterceessie said:
Heey mate,
I have the same as you,no pit.
The emmc is burned.
I take it to the repair center,and they told me it was the screen,cost 216 euros.
I say the screen is good it's the main board that's bad.
No warranty they say,f..k it.
Now I buy a main board from someone,100 euro.
Put it in and voila,it works.
Warranty samsung sucks.
Good luck.
Do you have the blue one.
It happens a lot with the blue ones.
Click to expand...
Click to collapse
with what excuse did they tell you no warrenty?
even if you flashed it they cant say no warrenty, a ok phone dosent burn emmc because of a flash, actually in eu theres a eu statement proven at court that says they cant say so, ill find the page for you, print that and throw that in their faces!
Searching is not really painful....have you tried it?
Follow the screenshots and use the Odin version included.
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Gate11 said:
Hey,
I have a samsung S3, I9300. I used a version of cyangenmod, a lillipop one for a while but I got a lot of troubles with, everytime the phone is down, and crashing. Yesterday, I found it blocked, it doesn't want to go on.
I tried to use Odin to install a new android but I got a problem :
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many versions of odin, used as administrator and nothing changed.
Please help me, I really need the phone for work tomorrow.
Thank you guys.
Click to expand...
Click to collapse
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
exonerare said:
Download another ROM preferably a KitKat Rom(Your choice). But since ODIN is blocked you'll have to flash it via your custom recovery. If you don't have a custom recovery:
Goto the Playstore
Download "TWRP Manager (ROOT)"
Open app
Grant Permission(on SU)
Select "Device Name"
Find "Samsung Galaxy S3 i9300"
Select "Recovery Version to install"
Select the latest one(The one very first at the top is latest available)
Hit "Install Recovery"
Make sure you have WiFi as it will now start to download the files..
If something like "Ensure the partition...... /dev/block/.." pops up; Hit "YES"
Click to expand...
Click to collapse
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Gate11 said:
The problem is that the phone is blocked, i can't access or turn on. Only Download mode
Click to expand...
Click to collapse
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
exonerare said:
Sounds like the phone is bricked.
You have to return to stock S3 via download mode and start the rooting again if ODIN still works in Download Mode.
Do you know how to?
Click to expand...
Click to collapse
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Gate11 said:
No, i don't know, I installed unofficial cyagenmod via odin but it's not working now
Click to expand...
Click to collapse
Follow this video https://www.youtube.com/watch?v=4NMTWvXQPjk
Read the description.
Good Luck.
exonerare said:
Follow this video
Read the description.
Good Luck.
Click to expand...
Click to collapse
That's what I was doing actually, i'm trying to download a new ROM now.
doesn't work, any other idea please?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
rp158 said:
@Gate11: try to repartition, Link
Take 4.3-set, of course, and if it contains no PIT-file, take this from 4.1.
Click to expand...
Click to collapse
The links are dead :/
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
rp158 said:
@Gate11, they aren't dead. They're Mega-links, download via your PC-browser or Mega-app.
Click to expand...
Click to collapse
I know me.ga but the files were deleted.
@Gate11, shame, then take this german site to download or search by yourself.
I rooted my phone using odin3 then tryed to flash the sdk23 arm64 xposed framework using flashify
Now im stuck on the samsung word logo 'boot loop' and i don't know how to fix it:crying:
Also have a custom recovery [TWRP]
now i think i broke it :crying: i cant get into the recovery mode i dont why but i went to advance wipe and check all of it
also now doesnt do to the samsung word logo it stays on the samsung galaxy s6 powered by android screen
also when charging no green is seen just a empty battery with lighting bolt
plus KERNEL IS NOT SEANDROID ENFORCING in red in the top left corner.
Think i basicallly wiped everything ohno
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
es0tericcha0s said:
I'm struggling to understand why you were using Flashify to install Xposed, especially since you have TWRP. Regardless, you have to try and get it into Download Mode. If you can, you should be able to reinstall the original firmware.
Click to expand...
Click to collapse
i am able to get to download mode (odin mode right?), now how do i reinstall the original firmware? (maybe link me some steps)
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
es0tericcha0s said:
1000 tutorials here on xda or youtube.
Basic structure:
find / download firmware
boot to Download Mode
open Odin as admin
place .tar or .tar.md5 file of the firmware in AP slot if one 1 large file or if it is split into multiple ones then they will be labeled obviously for BL, AP, CP, CSC just like in Odin.
Hit start and wait for a bit. If the flash is successful but it is stuck in a boot loop, then reboot to the stock recovery and reset it.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on the phone says
SECURE CHECK FAIL : (BOOTLOADER)
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
es0tericcha0s said:
Looks like you're using the wrong firmware. You have to use one for your variant and you typically can't downgrade bootloaders so it's gotta be the same firmware or newer.
Click to expand...
Click to collapse
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed
i used a file G920IDVU3EPEA_G920IXSA3EPEA_G920IDVU3EPEA_HOME.tar.md5
pretty sure its the right one, the sticker on the back of my phone says its SM-G920I
This fail doesnt have the SECURE CHECK FAIL : (BOOTLOADER) on the phone
Also 'An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software' appears on the phone screen
Never Mind i fixed it i just had to use a differnt cable, think my cable was broken.
Cant get into the recovery mode (hold down the volume up, home and power button at the same time) right?
did a factory reset in recovery mode still have a bootloop
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
xKyono said:
never mind again just didnt have the battery to boot up sorry think its fixed how love ya
Click to expand...
Click to collapse
:good::highfive::victory:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Smart switch is way better than odin.
Sent from my SM-G925F
supergoose360 said:
Hi All, Wiped cache partition in recovery by mistake on rooted S6 Edge 6.0.1, device then showed "kernel is not seandroid enforcing". Tried to flash stock firmware 6.0.1 (EE) and no luck.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Many thanks in advanced.
Click to expand...
Click to collapse
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root again
http://www.sammobile.com/firmwares/database/SM-G925F/BTU/
[U,[/U]
callumbr1 said:
Flash one of these g925f BTU firmwares.
Will work mate.
Or did you use cf autoroot? If so just flash the root ]
Click to expand...
Click to collapse
Thanks will try this! Any idea as to why it fails on cm.bin?
supergoose360 said:
[U,[/U]
Thanks will try this! Any idea as to why it fails on cm.bin?
Click to expand...
Click to collapse
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
callumbr1 said:
Is the firmware you tried to flash same as before? 6.0.1?
It can happen when trying to downgrade or bootloader locked. What rooted firmware was you on before? And what did you try to flash?
cm = Cryptography Manager. Preventing flashing previous builds is implemented in sboot.bin
The firmware you tried to flash was lower build than the firmware you was on?
Click to expand...
Click to collapse
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
supergoose360 said:
I was on 6.0.1, i tried to flash with stock 6.0.1 on ee to get out of bootloop.
Click to expand...
Click to collapse
Was you on ee firmware before?
callumbr1 said:
Was you on ee firmware before?
Click to expand...
Click to collapse
The phone came with an ee sim card so i can only assume so.
supergoose360 said:
The phone came with an ee sim card so i can only assume so.
Click to expand...
Click to collapse
Did you get it direct from ee?
callumbr1 said:
Did you get it direct from ee?
Click to expand...
Click to collapse
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
supergoose360 said:
It was a gift so i cannot say for sure.
Just flashed 6.0.1 BTU and got the same error on odin.
And now my phone shows "use emergency recovery function in smart switch" smart swith (latest version) does not connect to device. Also Thanks for your help so far!
Click to expand...
Click to collapse
Did you try to flash this one...
http://www.sammobile.com/firmwares/download/82651/G925FXXS4DPG2_G925FBTU3DPD2_BTU/
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
callumbr1 said:
Did you try
Also what error did you get this time? Dont worry the phone isnt bricked. Just need to work out and flash the correct firmware. If that didnt work try the XEU firmware
Click to expand...
Click to collapse
Cm.bin
FAIL!
i flashed using:
PDA G925FXXU3DPDP
CSC G925FBTU3DPD2
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
supergoose360 said:
Also i forgot to mention before i did the last flash my device was recognised by my laptop and popped up as SM-G925S which is korean but my phone box says SM-G925F
Click to expand...
Click to collapse
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
callumbr1 said:
Then that will be why the cm.bin fail. It is a g925s. What does it say on the back of the phone? It should be printed on it?
Click to expand...
Click to collapse
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
supergoose360 said:
It says g925f but thats because i recently replaced the back due to damage. Is it possible ive chaned the info of the phone so its showing sm-g925s?
Click to expand...
Click to collapse
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number
callumbr1 said:
No you cant change the info to make it say a different model. Can you get into recovery? Turn off phone. Then hold home +up + power button?
Click to expand...
Click to collapse
Sorry i cannot do that. Will this be a problem?
supergoose360 said:
Sorry i cannot do that. Will this be a problem?
Click to expand...
Click to collapse
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
callumbr1 said:
Or plug in to pc, find your s6 edge in my computer right click and go on properties. It will give you model number and serial number?
Click to expand...
Click to collapse
It is no longer recognised by the comouter in its current state.
supergoose360 said:
It is no longer recognised by the comouter in its current state.
Click to expand...
Click to collapse
Ok i just flashed twrp recovery and now its in recovery mode and has come up on the computer.
SM-G925S
Firmware version 1.0
Not sure if i should type my serial in here.