I already tried everything enabled ADB, everything seems fine, but when i start the root app, everytime it gives me this error
remount failed: operation not permited
failed to copy 'files\su' to '/system/bin/su': Read only file system, what am i doing wrong???
please help me what am i doing wrong i'm on 3.2.1 (release 2) and my kernel is 2.6.36.3 build 8#1 so it's supoused to be exploitable.
Tekkenlord said:
I already tried everything enabled ADB, everything seems fine, but when i start the root app, everytime it gives me this error
remount failed: operation not permited
failed to copy 'files\su' to '/system/bin/su': Read only file system, what am i doing wrong???
please help me what am i doing wrong i'm on 3.2.1 (release 2) and my kernel is 2.6.36.3 build 8#1 so it's supoused to be exploitable.
Click to expand...
Click to collapse
Did you do the Rescue-Backdoor with Condi's AiO Tool
If not then you are getting a red menu and if you already did that
Then maby you could try this:
1. Connect your tab.
2. Enable usb debugging.
3. Open device manager
4. Disable SONY TABLET S
5. Start Condi's 2.7 AiO Tool
6. Choose option 1 for root.
7. Press enter so your device will reboot.
8. look in device manager list and wait until SONY TABLET S re-appears
9. If it appears then you must enable it again and wait for the AiO tool to finish.
YF,
Mahaco.
thanks for answering, no i havent done the rescue back-door, so i should try that first? and then the steps you mention?
but wait don't i need to be rooted first to do the rescue back door?
also when the exploit starts and in the middle of it a meesage in windows apperas saying that it is trying to install MTP USB device and it's unable to install it maybe that's another cause?
pardon my noobinesh but im really getting desperate here.
You were right!!!!! i was disabling the adb device listed NOT the sony tablet S listed i disabled Sony Tablet S and enabled it again in the fist reboot and that did the magic (crazy uh?) thanks so much Mahaco you're a life saver now on to another dumb question now that i'm rooted what? xD
Tekkenlord said:
-Thanks for answering, no i havent done the rescue back-door, so i should try that first? and then the steps you mention?
-But wait don't i need to be rooted first to do the rescue back door?
-Also when the exploit starts and in the middle of it a meesage in windows apperas saying that it is trying to install MTP USB device and it's unable to install it maybe that's another cause?
-Pardon my noobinesh but im really getting desperate here.
-You were right!!!!! i was disabling the adb device listed NOT the sony tablet S
listed i disabled Sony Tablet S and enabled it again in the fist reboot and that did the magic (crazy uh?)
thanks so much Mahaco you're a life saver now on to another dumb question now that i'm rooted what? xD
Click to expand...
Click to collapse
Nice to hear you made it! You gave me a smile for that lol
Okay now try the rescue-backdoor,
Follow these steps carefully, be patient, if you have downloaded the update 3.2.1.r2
then don't install!, This will probaly change your kernal version and you will not able to gain root anymore!
So if you downloaded the update the AiO tool will go on,
if you have finished that, some values are changed and you are able to do the steps from Condi's ICS steps ( In Blue )
i must remind you even how silly it sounds, with switching you External SD from your tab to your pc
then don't forget to put it back before you continue, this wont brick your device but it can cause problems
and you have to re-do all the steps which is quite frustrating if you are stressed about bricking your device,
And last but not least, don't change your region thats not nessesary just follow the steps and you will get true
thanks i will try everything i can, i just wanted to ask what do you mean by if i downloaded the update 3.2.1 r2 you mean if i downloaded it from the internet then i can't do the ICS and rescue-back door thing?
because yes i updated the tablet via internet form an original update, thanks for the patience you have and the help; me i'm a total noob.
Tekkenlord said:
thanks i will try everything i can, i just wanted to ask what do you mean by if i downloaded the update 3.2.1 r2 you mean if i downloaded it from the internet then i can't do the ICS and rescue-back door thing?
because yes i updated the tablet via internet form an original update, thanks for the patience you have and the help; me i'm a total noob.
Click to expand...
Click to collapse
No the AiO tool will atomatic start the download 3.2.1.r2 on your tab nothing more just try the rescue backdoor and you will find out after you have proper driver installed
succes
i'm already in ICS and i can say it's quite nice and all, thanks again mahaco for all the help provided, and with another silly question, how can i gain more access to other apps now that im rooted? i use the condi's tool to install google market place modded or what?
Tekkenlord said:
i'm already in ICS and i can say it's quite nice and all, thanks again mahaco for all the help provided, and with another silly question, how can i gain more access to other apps now that im rooted? i use the condi's tool to install google market place modded or what?
Click to expand...
Click to collapse
Thats something you have to find out on condi's page thats not my part,
I'll PM you about something what you can do with Root access in combination with Rom Tool Box Free,
EDIT>
Be carefull with deleting system apps, there is a high chance that you ruïn your tablet,
so think twice before you uninstall an system app,
Don't try region changer still not supported i think,
I installed the modded version in HC but it didn't worked for me so don't know that
Related
Hi thanks for looking.
I'm a new register and newbie to rooting. And I'm currently following
[ROOT ICS L9 GUIDE] Root ICS with New Lelus method & Offline Flash [11-Mar] guide.
http://forum.xda-developers.com/showthread.php?t=2173465
Unfortunately, I'm a new user register so I can't post on that message thread. So, I was instructed to post my question here.
So, I'm following the guide word-for-word from steps 0 - 8 and now I'm up to the part where it says to "When done, REMOVE USB CABLE AND POWER OFF THE PHONE."
Okay, now question:
[Q]1: For step 9a and 9b. When do I actually perform these steps:
So, currently my USB cable is removed and the L9 is power off from the above step in STEP8.
9A. says to Add lines in "hosts" file as mentioned in step 1 of this post.
So, I'm going to assume that I add the Hex-Edited BIN file and related KDZ file that I've downloaded in STEP1.
But where do I add said lines to?
[Q]2: okay so for step 9b. Start "SmallServer" as mentioned in step 2 of same post.
Where is this "SmallServer?"
In step 2 of the same post, I've already Downloaded Root_and_Flash_Guide_byCMahendra(date).zip file (attached with this post) and extract in your C-Drive.
and gotten three folders named "C:\RootLelus" and "C:\RootFlash" and "C:\shttps"
[Q]3. Okay, now that I'm just advance reading to STEP10 that asks to follow Steps 3-10. Does that mean now I have to reconnect my phone back to the PC from STEP8 and go through the steps 3-10 again, since I've already gone through it the first time around.
[Q]4. the Actual Magic.
So, which LG UPDATE TOOL is the step 11 referring to? Is this when I'm installing the driver to my PC in Step 3? Or is said LG UPDATE TOOL sometime during step 4-8?
Sorry, for all the confusing NEWBIE questions. I'm just trying to follow all the steps without bricking my new phone.
Thank you in advance for your patience and assistance.
-Peter Wong
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Protomartyr said:
[Q]1:
It says follow "step 1 of this post" ; Those words are actually a link to a second thread which is this one:
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
[Q]2:
See above link in Q[1]
[Q]3:
Please read the link in Q[1] and then ask the question again if still don't understand
[Q]4:
Same response as in Q[3]
Click to expand...
Click to collapse
OMGaawwdd, I'm such an idiot, I totally didn't click on that link. Thank you very much.
No problem!
OKay, sorry... another question.
So, I'm now flashing with the PHONE UPDATE TOOL and after going through all the steps and the 'MAGIC' swap. My phone reboots and when it turns on I get an error message:
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
Please let me know what I did wrong and at which point in the process do I need to repeat all the steps again to root my phone.
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/showpost.php?p=36351786&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
Thanks in advance.
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Protomartyr said:
Hmm I remember getting a driver installation error when trying to put the phone into 'software upgrade mode'. In my case, I held the 'volume up' button down and plugged the USB cable into the phone. Then I got the error notification that the OMAP driver didn't install. Yet right after this, another set of drivers installed (I'm guessing the computer took a minute to recognize the different mode of the phone?). These new set of drivers installed successfully and I was able to root with no problems.
tl;dr I disregarded the OMAP error, and rooted just fine with no problems
Have you checked if you got root after flashing? If you do have root, then you should be fine.
Click to expand...
Click to collapse
Protomartyr,
Ohhh..so that error message isn't the cause of my phone not being able to successfully root, huh? No, my phone still isn't rooted. Basically when my L9 is successfully rooted is when all default icons on my phone are gone right?
So, a couple new questions then.
[Q]1: Okay, I know when it's time to flash you have to hold down the volume button and then plug in the USB cable into the phone. How long do you hold the volume button down? I hold the button down until the phone turns out with the S/W flashing message and then I let go. Do, I need to hold down the button throughout the whole flashing process?
[Q]2: How can you tell if the phone is rooted? Does it look different?
I'm guessing my phone is still haven't been rooted and I'm only getting this error message.
[Driver Software Installatior
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
OMAP4430 Device unplugged]
So, if the above error message isn't the cause of my failed rooting. At which step do I go back and reattempt to root my phone?
Do I go back and use the [GUIDE] FLASH L9 Factory ICS/JB ROM WITH OFFLINE FIX + UNBRICK
http://forum.xda-developers.com/show...86&postcount=1
And start with STEP7 and rerun the PHONE UPDATE TOOL and MAGIC swap?
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Protomartyr said:
You wouldn't see a difference once you rooted right off the bat. You should see the SuperSU app in your apps list if you followed the procedure. However, having the SuperSU app doesn't mean you are rooted (SuperSU binaries must be installed as well and this requires super user privileges).
To check if you have rooted successfully, the best way is to just download 'Root Checker' here (Click Me for Link)
Once you install Root Checker and open it, you should see a notification asking for Root Checker to get super user privileges. Accept the notification and you should see 'Root successful' or something along those lines.
Let me know if Root Checker says 'successful' or not, and maybe we can troubleshoot after that?
Click to expand...
Click to collapse
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
peter wong said:
Hey Protomartyr,
Cool, my phone installed SuperSU in my apps menu and Root Checker says my phone has been rooted. Now I just need a guide or info on how to remove the bloatware and what I can do with my rooted phone. Thanks for all your assistance and guidance.
Click to expand...
Click to collapse
No problem. Congrats on getting root :highfive:
As far as removing bloatware safely is concerned, you might have to ask someone else (I'm still a newbie at these things). You can remove/disable them using Titanium Backup (from the app store). Proceed with caution though, as you don't want to remove an app that the phone needs to function. From what I hear, it's safer to just disable unneeded apps (though even then you must tread carefully). Titanium Backup is also useful for backing up all your apps/system apps/user data.
As far as what you can do with root...well that's like asking how many drops of water are in the ocean You can fully customize your phone and even install a new ROM; just naming a few. You can get a better picture of what people are doing with their phones in this thread [Click Me] as well as the other LG L9 threads.
Enjoy!
Lg Optimus L9 p76910g 4.0.4
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Domonick5150 said:
I want too know if the T-mobile lg optimus L9 can be rooted my specific device is in the picture attached i read through the forum and could not understand if there was a for sure way to do so. I have rooted and flashed my LG optimus net from net 10 To arearom Q So following instructions on how to root my exact device would help alot if anyone could direct me too another thread.
Thanks,
Click to expand...
Click to collapse
According to your screenshot, you have the P769 running firmware 10g
You can root this device using the method described in this thread.
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
peter wong said:
Thanks again for everything Protomartyr,
You've been really helpful. Okay, another question. So, now that I've rooted my phone. Do I now go back and turn on the Lookout Security Antivirus, that I've had to turn off during the rooting process steps? Or would I need to allows need to leave it off to keep my root active?
Click to expand...
Click to collapse
You can re-enable Lookout after you root.
one more question
Do you believe that this will be the only rooting method released?
Domonick5150 said:
Do you believe that this will be the only rooting method released?
Click to expand...
Click to collapse
As far as I know, this is the only method available at the moment; but I'm a newbie so don't take my word as the golden truth
thanks
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Domonick5150 said:
Well you helped me out it's just i read tgat thread & it said 10 g india version with USA t-mobile un-tested So idk.
Click to expand...
Click to collapse
Could you point out exactly where it said this? I re-read the thread and couldn't find it.
I'm new to this whole Android scene, been an Apple user my whole life. I know the ins and outs of iOS and jailbreaking, but i can't figure out how to root my device for the life of me!
I've looked through Google and found this (bin4ry's recovery), which picks up my device, and I get the screen on my phone saying restore, which I click. Then it comes up with "Starting restore", before coming up with "Restore ended" a few moments later. After that the program just sits there, obviously failing to root the device.
I've also read through this thread but didn't understand any of it, and attempts to follow instructions given were all dead ends
Any help would be much appreciated.
Cheers
What type of phone, and what android version..?
Miniricho said:
What type of phone, and what android version..?
Click to expand...
Click to collapse
Alcatel OT-993
Running Android ICS 4.0.4
Ultim8um said:
Alcatel OT-993
Running Android ICS 4.0.4
Click to expand...
Click to collapse
Have you tried cd (change directory) into the folder where your bin4ry restore is located?
Commonly happens to most phones, there's a video on the site where you download it from.
Also that russian page is for installing CWM (clockworkmod recovery) And you need to be rooted in order to do that.
Miniricho said:
Have you tried cd (change directory) into the folder where your bin4ry restore is located?
Commonly happens to most phones, there's a video on the site where you download it from.
Also that russian page is for installing CWM (clockworkmod recovery) And you need to be rooted in order to do that.
Click to expand...
Click to collapse
Ah that explains why I couldn't follow it. Cheers
Also I presume you mean in the command prompt?
puu(dot)sh/2EfaU(dot)png
Would that be correct? Because that is how I have done it every time
EDIT: This is the step it stops on. puu(dot)sh/2EfpJ.png I click restore on my phone and as stated in the OP it starts and ends the restore instantly
Are you sure your phone is rootable via this method?
Miniricho said:
Are you sure your phone is rootable via this method?
Click to expand...
Click to collapse
Its the only method that comes up when searching for my phone, but no I'm not sure. If you know any other methods that work that would be wonderful
Maybe just try some of the most popular methods like unlockroot, or superoneclick,
if all else fails, make sure your drivers are installed correctly, and keep trying and searching around. Good luck.
Same problem
-Ran the latest version of Bin4ry on my Alcatel OT-993 running unrooted Android 4.0.4.
-The script seems to run correctly and I'm able to click the Restore button but it wont reboot the the phone.
-When I manually switch of the phone it displays that the script was successful and says its waiting for the device to reappear.
-When the phone is switched on again the script finishes but says im not rooted
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
Ladies and gentlemen, I would like to present to you all a formal guide to venture into one of the best smartphones in the market, the underdog to the other mass marketers, the Sony Xperia Z3v for Verizon!
*Please note I am not responsible for any bricking, destruction of your device, alien invasions, or any other problems. It is up to the user's choice to seek out what is done on your device on your own terms.*
This is the method I would recommend that's much quicker and efficient is Kingroot. I know there were some previous controversy about what could be behind Kingroot, but from what I will show here is using Kingroot as leverage to gain access quickly into my prerooted Lollipop firmware that can stand alone after removing Kingroot afterwards.
1. Have the Z3v in your possession.
2. Google "Kingroot" and download for Android and run the rooting process there.
3. Download "Superuser" from the Play Store to have the binary to run root fully. (Optional just in case the next step doesn't work)
4. Install XZDualRecovery (grab the flashinstaller for the Xperia Z3) to install TWRP from here: http://nut.xperia-files.com/path/XZ...40vagg0tpcrnm1vlnt63je5&randomizer=_ehkq575vz
(The link is subject to change, so if that happens, navigate through here: http://nut.xperia-files.com/)
5. Download my new 5.1.1 prerooted Lollipop zip from my thread here: http://forum.xda-developers.com/z3/...08-prerooted-lollipop-5-1-1-23-4-b-0-t3338967
6. Access TWRP by opening an app called NDR Utils in your App Drawer
7. Flash my zip through the install button and now you'll be on the latest prerooted stock build of Lollipop with a few mods.
Optional Step 8. Uninstall any traces of Kingroot from your phone and you're good to go. This step may already be done for you after you flash the prerooted because reportedly there were already no traces left behind. Enjoy!
Thanks to the following people:
@zxz0O0, for achieving root for our Z3v
@jal3223, for helping me as much as you can to guide me through myself
@[NUT], for the custom recovery to install onto our Xperia devices
Please hit thanks for the all in one guide to freedom!
hey man,
im getting stuck after running root.bat
i get javaruntime =null error
did you experience this and do you know what i should do.
also the java link you provided is dead
Mountainfisher said:
hey man,
im getting stuck after running root.bat
i get javaruntime =null error
did you experience this and do you know what i should do.
also the java link you provided is dead
Click to expand...
Click to collapse
At that point, that's what was stopping me too. What I did was just go ahead and redownload the root files, uninstall all Java on my desktop and resintall it. Then try again to make it work.
GigaSPX said:
At that point, that's what was stopping me too. What I did was just go ahead and redownload the root files, uninstall all Java on my desktop and resintall it. Then try again to make it work.
Click to expand...
Click to collapse
What do you think are chances are of unlocking our bootloader now? Sony's unlock site will give us an unlock key for our device. I'm not sure what is holding us up.
Oh No, I vowed to stop messing with my phones....
jal3223 said:
What do you think are chances are of unlocking our bootloader now? Sony's unlock site will give us an unlock key for our device. I'm not sure what is holding us up.
Click to expand...
Click to collapse
Personally, I'm fine without doing custom ROMs. I like how Sony's UI works as it is and I prefer it that way than going full AOSP like any other Nexus phone. I just like to buy what came with the package as is intended.
Bobby Buggs said:
Oh No, I vowed to stop messing with my phones....
Click to expand...
Click to collapse
This is well worth to do. I installed Xposed, and unlocked some awesome stuff. Such as using Superior Auto mode with 15 mp right off the start or 20.7 MP. Greater the details, amazing functions made.
Oh and also, I will now proceed to upload the flashable zip of the latest FW being prerooted. Just so there's some better things to deal with.
Ive uninstalled java, reinstalled java, factory reset twice, still the java runtime error =null
im bout cooked for today
Mountainfisher said:
Ive uninstalled java, reinstalled java, factory reset twice, still the java runtime error =null
im bout cooked for today
Click to expand...
Click to collapse
This guy said it took him 10 times so I am going to keep trying till it works!
sthrnsprtsmn said:
I was getting the same errors. I had to factory reset the phone multiple times and redo the steps. On about the 10th time, it took. I skipped the phone set up steps, and kept a root checker apk on my sd card to speed it up. Also, I unchecked the verify apps over USB. I didn't see that mentioned anywhere.
Time to send my donation. Thank you very much @zxz0O0
Click to expand...
Click to collapse
Perhaps I'm missing something. What is the secret to getting flashtool to recognize the ftf after you have moved it to the root of the firmwares folder and first open flashtool. A pop up tells me to move the file but it is already there. I love and loathe this hobby.
JediDru said:
Perhaps I'm missing something. What is the secret to getting flashtool to recognize the ftf after you have moved it to the root of the firmwares folder and first open flashtool. A pop up tells me to move the file but it is already there. I love and loathe this hobby.
Click to expand...
Click to collapse
Your C:/flashtool/firmware folder should be empty. Place the firmware you want to use in /USERNAME/.flashtool/firmware
make sure you uninstall all java and re install fresh!! that was what was holding me up
Someone should do a youtube of this process live
6. Follow the instruction exactly as stated then proceed. , I dont see the instructions.
Of course my phone is at 0 .E. 1 .44 build, so that means I have to go back to the older build, do this root and then reflash to the 1 .44 build?
Bobby Buggs said:
6. Follow the instruction exactly as stated then proceed. , I dont see the instructions.
Of course my phone is at 0 .E. 1 .44 build, so that means I have to go back to the older build, do this root and then reflash to the 1 .44 build?
Click to expand...
Click to collapse
You completely skipped steps 1 and 2 because you're on the latest build. Step 6 is following the instructions that are listed within the exploit.bat.
You won't be reflashing the latest until you've followed through to the new list of steps that occurs after 9.
Giga, sent you a Pm
---------- Post added at 09:31 AM ---------- Previous post was at 09:20 AM ----------
Call me a idiot but I dont see any instructions, I ran the exploit file and my screen shows daemon started successfully but nothing else
ROOT Z3V
This is how I did it. following GigaSPX's instructions
1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download here
Downloaded the firmware
2. After having downloaded the FTF, please proceed to using the flashtool to flash your phone. Place your FTF in the firmware folder of the .flashtool folder to run from therein this process I found out that you don't want to just copy the files but use cut and paste. and I added the firmware i downloaded. You may uncheck Data from wipe.*
I turned the phone off, held volume down and connected the phone to the USB cable attached to the pc.
3. Download the files to root right here.
downloaded the root files but I actually downloaded these files http://forum.xda-developers.com/showpost.php?p=60529402&postcount=232
4. Grab the Java Development Kit from here. To prevent issues, you may want to uninstall Java existing on your computer to do a fresh install of this.
5. Extract the zip of the root files into a place and then run exploit.bat.
when i reached this the phone asks to let your pc connect, then you click ok... (im assuming you have developer options usb debugging enabled and allow unknown sources checked) When the exploit stops, go to your phone and go to Developer options and click on Select Debug app and choose the test2app then enable "wait for debugger"
6. Follow the instruction exactly as stated then proceed.
because I used that those root files, the process ended here since that root runs automatically after the exploit ends. phone restarted and verizon will give you the OTA update, which BTW it doesnt make you loose root
7. Once it stops at a line saying "please continue to press any key", go back to the folder named as "root" and run root.bat from there.
8. Your phone will reboot from here and you will enjoy root. If it doesn't work, try again a few times while going to command prompt and enter the following line to do a fresh cleanup before trying again:
I hope this is not too confusing. if it is I apologize. let me know and I'll take it down so I don't confuse people more
xratablancax- After you run the exploit file the root one opens by itself? I am not having this. I have to manually open both the exploit once it is finished, I then have to click the root method to get that going. Trying to clarify. I haven't gotten past the Java Null error. I know a few folks that might have me do this for them and I would like to do it for them. Lets say I don't get it. Will I still receive an OTA to get back to the latest? Or will I have to build or find an FTF to do so. Thanks.
Great write up!
Thanks for the time and effort you put on rooting our abandoned Z3v.
Really look forward to flashing the Pre-rooted firmware that you're about to made
xratablancax said:
This is how I did it. following GigaSPX's instructions
1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download here
Downloaded the firmware
2. After having downloaded the FTF, please proceed to using the flashtool to flash your phone. Place your FTF in the firmware folder of the .flashtool folder to run from therein this process I found out that you don't want to just copy the files but use cut and paste. and I added the firmware i downloaded. You may uncheck Data from wipe.*
I turned the phone off, held volume down and connected the phone to the USB cable attached to the pc.
3. Download the files to root right here.
downloaded the root files but I actually downloaded these files http://forum.xda-developers.com/showpost.php?p=60529402&postcount=232
4. Grab the Java Development Kit from here. To prevent issues, you may want to uninstall Java existing on your computer to do a fresh install of this.
5. Extract the zip of the root files into a place and then run exploit.bat.
when i reached this the phone asks to let your pc connect, then you click ok... (im assuming you have developer options usb debugging enabled and allow unknown sources checked) When the exploit stops, go to your phone and go to Developer options and click on Select Debug app and choose the test2app then enable "wait for debugger"
6. Follow the instruction exactly as stated then proceed.
because I used that those root files, the process ended here since that root runs automatically after the exploit ends. phone restarted and verizon will give you the OTA update, which BTW it doesnt make you loose root
7. Once it stops at a line saying "please continue to press any key", go back to the folder named as "root" and run root.bat from there.
8. Your phone will reboot from here and you will enjoy root. If it doesn't work, try again a few times while going to command prompt and enter the following line to do a fresh cleanup before trying again:
I hope this is not too confusing. if it is I apologize. let me know and I'll take it down so I don't confuse people more
Click to expand...
Click to collapse
JediDru said:
xratablancax- After you run the exploit file the root one opens by itself? I am not having this. I have to manually open both the exploit once it is finished, I then have to click the root method to get that going. Trying to clarify. I haven't gotten past the Java Null error. I know a few folks that might have me do this for them and I would like to do it for them. Lets say I don't get it. Will I still receive an OTA to get back to the latest? Or will I have to build or find an FTF to do so. Thanks.
Click to expand...
Click to collapse
What line of code
JediDru said:
xratablancax- After you run the exploit file the root one opens by itself? I am not having this. I have to manually open both the exploit once it is finished, I then have to click the root method to get that going. Trying to clarify. I haven't gotten past the Java Null error. I know a few folks that might have me do this for them and I would like to do it for them. Lets say I don't get it. Will I still receive an OTA to get back to the latest? Or will I have to build or find an FTF to do so. Thanks.
Click to expand...
Click to collapse
If you look at the link I provided, that gives your a different set of root files, one that the Exploit runs and right after root runs automatically.
VERY IMPORTANT... YOU NEED TO FLASH YOUR DEVICE TO STOCK ROM, YOUR DEVICE NEEDS TO BE IN ROM, 23.0.E.0.376, BACKUP DEVICE, FLASH THEN ROOT THEN OTA UPDATE
Hello, there!
The precious thing is a cheap 7" allwinner a33 tablet. By apps its recognized as Astar y33.
It is a 16Gb Storage Tablet with 1 gb ram. I bought ist for 42€. :cyclops:
Unluckily i only can install apps on a 1 gb internal storage and the 16gb are only for media or movable apps. It should have 1gb ram but Aida64 said it has 512 installed.
I urgently need to give root to it, to make it work -and enjoyable. I allready tried out:
-Kingoroot (also via PC)
-Kingroot
-Iroot
-Towelroot
-SuperOneClick.exe
-and various desktop based one click rooters
and all failed.
I dont know what i can try next.
I have the ADB driver, but not a certain fastboot interface driver, which i could not find in the internet at all. I have a 64 system.
Many people with similar tablets could root them with Kingo root or Iroot, but it worked not for me and my tablet must be somehow different, it also did not had any bloat or malware on it.
Please, please, give me a hint what i could try next. :silly:
These are the specifications of the tablet:
*See attachements
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Good evening!
I tried it out right now.
It was flashable but the su binary wont let me update. How should i update the su binary? Do i need another flashable zip?
Unluckily the root checker says that root permission is not granted yet.
Update: I flashed a current Supersu update.zip with my stock recovery mode.
It says "installtion abortet".
I dunno. I ll have to use the tablet to cut vegetables. *joke
Wow, seems like suddenly root was granted.
Last thing was: I tried to root it with Iroot via PC.
It installed some adware on the tablet but the root checker still said no.
Then Kinguser detected some malware in the notification are. I fixed this and noticed that i also could remove system apps with Kinguser.
Then i retried apps that recommed root like rashr and to my surprise - root was granted suddenly!!!
:laugh:
Woah! Somehow im not so sure what rooted it now, because i already tried everything five times before already and it didnt work ^^
I think, it could be this:
Kingroot has shown me before, that my device is not supported. I could kinda request compatibility, which i did.
Maybe this magic happend unnoticed and suddenly it was rooted.
Oh ****.
Afterwards i flashed some recovery.img someone told me its for TWRP for the tablet.
Since then, its in a bootloop.
How to fix this? For now, i will just wait until the battery has run empty. (That fixed beeing stuck in fastboot mode before)
THANKS!!!
Nejix83 said:
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Click to expand...
Click to collapse
Hey dude, you are awesome! I could not find anywhere this file. At last my tablet is rooted. I have been looking for firmwares for these tablets everywhere and, as they are really old and chinese crap now, all mirrors I find are down. Where did you find this zip? maybe I can find a firmware there. I need to flash it from 0 because I did a mess with adb and deleted every system app
Hello everyone
do you have an update.zip SuperSU-v2.82
Best Regards
Great !
Nejix83 said:
Root method for recovery
Good afternoon!
To apply the patch-and for rooting you device, it is necessary to get into Recovery.
So try to load into recovery by this way: "Settings-> Recovery and reset-> Recovery Mode".
After rebooting, you see some menu where you should select drive(sd card) on which the pre-recorded file "Update.zip"
After finishing, restart your device use first point of menu.
Now you have a root, it is necessary to update the SuperSu by selecting "OK".
P.S.
I didn't test it but find it on some good forums. Send privet massage to me if you have some questions.
Root_patch
Click to expand...
Click to collapse
That's work fine.
My Tv Box is Q Plus Android 9.
Maybe it can help : You can use the rom of Vorkez 7 in Q Plus, because they have same hardware.
steleclanel1 said:
That's work fine.
My Tv Box is Q Plus Android 9.
Maybe it can help : You can use the rom of Vorkez 7 in Q Plus, because they have same hardware.
Click to expand...
Click to collapse
@steleclanel1
Hi, I have a Q Plus box too and have managed to root it but I need to bypass google play device check. I have edited build.prop successfully but can't find the global settings database to complete this. Are you able to help... does the Vorkez 7 rom allow for this? Thanks
thanks, it is work fine