Related
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Get a case.
Sent from my PG86100 using XDA App
e_town said:
I've been a (very) proud 3VO owner since July 2nd. I can be rough on my gadgets / phones, but i've been treating this one well. I have started to notice some of the black paint wearing off around the top of the metal bezel (specifically between the light sensor and the headphone plug). It is mainly on the sharp edge / corner, but is also showing in a few other places. I'm assuming it is from the phone being in my pocket rubbing on coins. Keys are always on a carabiner, knife is in other pocket, and don't carry a lighter.
My question is this: Has anyone actually sanded that piece down and polished it? I know it is not going to be a high grade metal, but I'd imagine if the phone was tore down that piece could be precisely sanded and buffed. Even if it was a little rough, a brushed metal look would be pretty slick looking around the phone. That bezel does have some printing on it around the camera button for "2D 3D Camera Mode", but who cares. We know what it does.
I'm afraid after a few months of use this thing will look like it's been through hell and back.
Click to expand...
Click to collapse
A high gloss polish would look too iphoney (2g/3g variants.)
And a brushed metal style would look too similar to LG line of current phones. In my opinion.
But.. To me. I like how roughed up metal looks. So, some worn paint, maybe some rust spots would look kinda bad ass to me. Lol.
Sent from my PG86100 using Tapatalk
novanosis85 said:
Get a case.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thank you for adding value to this thread.
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Xencer said:
I've dropped my phone about 3 times now and I never dropped my galaxy s I had for a year. But there are silver metal scratches
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Well thats the thing I have NEVER dropped my E3D and it has been in a Otterbox Defender since the day I bought it. I pulled it out to clean it and make sure there was no dust in there and I noticed the paint chips.
I am not kidding, use a sharpie marker, looks damn good.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I did but it doesn't stay... :|
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
hchavarria said:
I just bought mine this past weekend but if this is a wide spread problem it'll suck. I wonder if a fine grain would remove the black paint without roughing up the medal. If I were to do this will it void the terms of the sprint protection plan? Heck I wonder if they will fix this problem under the TEP program.
Click to expand...
Click to collapse
Answer: No, it's not a problem, it's normal wear and tear.
OP, you could definitely try your idea. But in addition to that, I put any coins I have in my other pocket. Nothing goes in the same pocket as my 3D except maybe a piece of paper on occasion.
il Duce said:
I am not kidding, use a sharpie marker, looks damn good.
Click to expand...
Click to collapse
I've dropped my phone where the metal bezel has a scratch and now is bare. Using a sharpie marker works but the marker wears off after a while. I used a sharpie marker and then used a tpu case. The problem solved.....for now.
Jeremiah239 said:
I just noticed 2 spots on my phone where the paint is wearing away on the bezel, it pisses me off!
Sent from my E3D using Tapatalk
Click to expand...
Click to collapse
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Noiro said:
If you have OCD, You're within your 30 days to make a fresh exchange.
And then buy a case on the follow-up.
Click to expand...
Click to collapse
I do have OCD and I have had a Otterbox Defender on my phone since the day I bought it! So I think its gonna keep happening no matter what I do!
I'm still in my 30 days and I also have dust under the screen so I might get a replacement anyway.
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
I've got a small dot exposing the metal on mine. Its not that noticeable but just in case I now have a case on it.
Well as luck would have it I noticed something white on one of the corners of the phone do I rubbed it with my thumb and some of the black paint came off, same thing happened with the bottom corner. This phone is just 5 days old! I haven't had many of the problems manifest as discussed in other threads so I wouldn't want to return it but I am certainly contemplating it.
R2D2 631 said:
This aluminum frame that is on the front and sides of this phone is a really bad move by HTC... ive been xtra careful especially for my thirty day period... and rite ontop of front speaker there is a little white spec, it isnt a dent or scratch but a white small mark.. I see more problems to come with this aluminum front... And im not the one who likes wearing rubbers for protection i like my phone naked and just wear a phone holder on belt.. this is just another problem for the evo3d.... this along with the signal.,heat issues maybe because of radio, stupid sensative cheap power button.. all making me go back to my e4g... never had any of those issues i just mentoned.
Click to expand...
Click to collapse
Yep it doesn't matter how careful you its gonna happen! Even with a case it happened to me then I took my case off for 3 days and another one showed up and I treat my phone like gold I am actually way over protective with it. I'm thinking of taking it back and getting the NS4G! I have dust under my screen now the paint is chipping and my rear speaker sounds like ****, I'm just scared the problems I have now are only gonna get worse.
Wow another problem. I too have paint chipping on the left side on the lower part by the screen. I rubbed it thinking it was dust and now it's silver. It also looks like the plating is slightly bent. And I also have a small white dot right under the sense on the metal part. Looked at my Shift and 4G and I see nothing like this and I used the hell out of those. As opposed this one, which is already a replacement for other issues.
Its 3 days old ffs. I've barely used it. Exchanging it is useless, its the build quality. It's going to happen to all EVO 3Ds sooner or later, even with a case and super care. Within a few months it will look like crap.
Oh well, I'm definitely returning this, but I'll do it after I have some fun with it. I hope the SGS2 has superior build quality, I think I can live without Sense from now on.
My wife has never dropped hers. But its bad. I dropped my phone once on some rocks. Small silver scratch on the face.
Sent from my PG86100 using XDA Premium App
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across this where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Gonna check out this link when i get on my pc. But sounds like a pretty good idea. Back when I had an ipod touch I hated the mirror backs because of how scratched up they got so i sanded it to look like stainless steel. Worked out perfect.
Although I don't like the shiny plastic look its not so bad I think I can live with it but if this ends up working good with the EVO maybe ill give it a shot but I don't think ill be the guinea pig haha
Sent from my PG86100 using xda premium
njgtechguy said:
Like many others, the top of the Evo 4G LTE is a major detractor. When looking for a way to fix this I came across hxxp://basejewellery.com/media/iphone/17.jpg (I haven't posted enough to allow links) where they sanded the polycarbonate of the glossy iPhone to give it a brushed look. I'm curious as to how well something similar (using circles insteads of lines to make it matte but not brushed) would work well with the top of the Evo 4G LTE. What makes this worse is that in the video HTC published you can see a prototype with matte plastic and it looks tremendously better.
Click to expand...
Click to collapse
Yes it also broke my heart to see that prototype, I was like..WHYYYYYYYYY!!!!
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Rodderik said:
with the obvious disliking of that piece i'm sure there will be 3rd party replacements since it is supposedly easily removable
Click to expand...
Click to collapse
I thought so to but it does house the nfc chip so if anyone does make one it probably won't be cheap
Sent from my PG86100 using xda premium
It's not the NFC chip but just the antenna so third parties should be able to make a replacement part. The area near the lens worries me a bit though. Unless it looks better in person I think I will sand it.
Thanks for posting this. I was already planning to do this but now I have some instructions. For anyone who doesn't want to read the external posts, the process should go something like this:
1. Remove the shiny plastic back-cover
2. Acquire two small pieces of sand paper (one 800 grit and one 1200 grit)
3. Start by wet-sanding with the 800 grit sandpaper (use a forward-back motion)
4. Clean, inspect, and continue sanding until all shiny spots are gone
5. After you've gotten to all the tricky spots, let it dry, clean again with a soft cloth, and check out the results. This will produce a very dull finish.
5. If you would prefer a more polished finish, switch to the 1200 grit sandpaper and carefully re-sand the entire surface
6. Post pictures on xda.
I'm sure there will be third parties making backings. It'd be an easy way to make money too, if anyone is keeping track of this idea. I for one love the two-toned look.
I despise the two-tone look. I wish I'd never seen the AT&T One X in white. makes me hate the looks of the back of this phone that much more. If I get one, I'll be doing this or painting the back or something to make it look better.
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
njgtechguy said:
If anyone is experienced with sanding, is the 800 anf then 1200 grit approach appropriate?
Click to expand...
Click to collapse
Yes, coarse paper first (800) then the finer paper (1200), I would test it out first. and don't forget this should be a wet sand with water as a lubricant.
I wanted to put in a request to Seidio to make some in a limited quantity but:
1. I wonder if they'll follow through?
2. Will it kill the signal advantage of the OEM's door?
3. Will it dissapoint (Still glossy, Loud, LOGO plastered, Weird etc.)?
That back peice is also part of my reasoning for wanting a white one.
i wonder if the plastic is a coated red like the original evo.
i thought it was neat with the original evo, you could sand to reveal red.
the back doesnt bother me, it'll be covered with a casing anyways.
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
flex360 said:
lol
i could care less
cuz as soon as i get it im slapping a nice case on it
people just love to moan for nothing
Click to expand...
Click to collapse
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
blkswanpres said:
What about the people not putting a case on it, not that it bothers me but still some people don't wrap their phones up.
Click to expand...
Click to collapse
This otherwise what's the point of putting a label on the.back
Sent from my PG86100 using xda premium
I usually skin my devices when I get em so my entire phone looks shiny like that lol. Hope to pick one up around Christmas
Sent from my SPH-D710 using xda premium
I don't understand why people would want to put cases on their phones. It's the same principle as buying an expensive couch and 'protecting' it with a plastic cover or buying an expensive car and then installing neoprene covers on the seats. This is an awesome, well built phone. It was designed to be used 'naked'. If it needed an additional layer of clothing, HTC would have designed it into the phone.
I feel that if people would just learn to take care of their phones, they could enjoy using them the way they were designed to be used.
Anyway... my 2 cents. You have a right to disagree and, if you buy the phone, it's yours to do with as you please. But, personally, I just can't stand to see a beautiful smart phone dressed in a purka (a phone burka).
I'm probably going to sand blast mine as soon as I get it. if its just polycarbonate it'll turn out nicely!
Just wait a month or so for the Chinese to make a nice top replace and post it on Ebay.
I dont have an EVO LTE to do it, but I think the black matte plasti-dip should look good on the phone, giving a complete matte look on the back.
Anyone care to try it??
This is what i'm talking about
http://www.youtube.com/watch?v=FchIWF8Vi2Y
once I get my phone ill try it. im confident that it'll come right off with no damage done to the cover
The issue with this is that it will do just that, peel right off. I'd say probably less then a day.
No way that is staying on once you put it in your pocket.
i think it would stick.
check out whole cars and wheels done in plasti-dip.
plus they have more colors to choose from.
http://www.dipyourcar.com
regalpimpin said:
The issue with this is that it will do just that, peel right off. I'd say probably less then a day.
No way that is staying on once you put it in your pocket.
Click to expand...
Click to collapse
I think you'll be surprised at how effective plasti-dip is at sticking to the surface. It is only easy to peel off once you get a hole started and work it bigger and so on. If there is a tear or hole you can easily patch it by spraying some more on
I was highly considering this for my EVO as well. I've used plastidip for my grill and headlight eyebrows, and it sticks well, but one you get an edge started, it will peel right off like a sticker. I might try it (since I have some spray leftover from my grill) and if it falls off too easy, I'll just toss some flat black vinyl over the whole back of the phone.
I think it's a good idea. Plasti dip is pretty popular in the car world. I suggested the same thing in another thread a while back but no one responded.
Sent from my EVO using XDA
Looks pretty cool, I'd give it a try if I wasn't gonna use a case.
http://forum.xda-developers.com/showthread.php?t=1690710
No peeling and no need to reapply. Do it once and you're good to go.
s4pat said:
i think it would stick.
check out whole cars and wheels done in plasti-dip.
plus they have more colors to choose from.
http://www.dipyourcar.com
Click to expand...
Click to collapse
This has to be one of the dumbest things I've seen. I have plasti-dip that I use to put grip on tools. I can't imagine trying to do a whole car in it.
Sent from my New School EVO LTE
I have some at home (still need to do the rear emblems on my car). May have to give it a try.
How do we amaze owners keep the device looking amazing
Sent from my HTC_Amaze_4G using xda app-developers app
you mean flashing bad ass rom's... or exterior by using screen protectors and cases?
I try not to drop it in the dirt if that's what u mean..lol
Ninjistix said:
you mean flashing bad ass rom's... or exterior by using screen protectors and cases?
Click to expand...
Click to collapse
Meant like cleaning AMD stuff, wiping screen etc
Q
Sent from my HTC_Amaze_4G using xda app-developers app
filthygoat223996 said:
Meant like cleaning AMD stuff, wiping screen etc
Q
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Hey FilthyGoat I take my case off, remove battery and lightly air blow, wipe the edges there is always a little layer of dust there.
I do that ever couple weeks so it does not accumulate. I also use a LCD screen cleaner, no house hold cleaners on the screen.
Hope my method will give you some tips FilthyGoat .......your username makes me smile with this question you asked
CalicoJeb said:
Hey FilthyGoat I take my case off, remove battery and lightly air blow, wipe the edges there is always a little layer of dust there.
I do that ever couple weeks so it does not accumulate. I also use a LCDs screen cleaner, no house hold cleaners on the screen.
Hope my method will give you some tips FilthyGoat .......your username makes me smile with this question you asked
Click to expand...
Click to collapse
Indeed, thing is, filthy goats have a very hard time keeping anything clean
I go try hard some times and completely give the phone a wipe down but the screen becomes smudged very quick ... Maybe cuz I'm filthy? Who knows
Sent from my HTC_Amaze_4G using xda app-developers app
mine too, smudges happen very quick, doesen't take much in terms of greasy fingers. I have a couple eyeglass cloths around my desk at work and I give it a spray with the eyeglass solution and just wipe it down. Also, I change the screen protector every few months, and go through a few tpu cases a year. Mine still looks as new as the day I bought it.
the kinda of case and screen protector i'm using don't really leave smudges... the most ill have to worry about is dust gathering around the corners of the screen where the protector is.. but i just blow it off dust and wipe it whenever it looks dirty
Is eye glass cleaner harmful to the glass display?
Sent from my HTC_Amaze_4G using xda app-developers app
Has anybody noticed that dust collects on the inside of the little window for the front-facing camera? Or, am I the only one this has happened to? I have no idea how to clean it; I've tried shooting "canned air" into the back with the cover off, and into the earpiece. If anyone has any suggestions, I'd gladly listen. Thanks!
takingflight005 said:
Has anybody noticed that dust collects on the inside of the little window for the front-facing camera? Or, am I the only one this has happened to? I have no idea how to clean it; I've tried shooting "canned air" into the back with the cover off, and into the earpiece. If anyone has any suggestions, I'd gladly listen. Thanks!
Click to expand...
Click to collapse
Hasn't happened to me yet, but I'be only had the amaze for half a year so Idk
Possibly a design issue?
Sent from my HTC_Amaze_4G using xda app-developers app
i go naked!
I originally had a ballistic case for my phone but hate how bulky it was, and the phone is a heavy beast as it is. I really don't like screen protectors either, they either smudge too much, or distort the clarity of the screen. So I'm going totally naked now which can be a delicate operation, so I take the following steps to keep my phone clean.
1. Don't drop it. Duh. Most of the time dropping a phone without a case isn't the end of the world though, and I could live with a ding in the corner should it happen, better than living in fear and having a frumpy-ass case wrapped around it the other 99.9% of the time that I don't have poor coordination...
2. Never set the phone down on a hard surface unless very gently, this prevents scratching. If I do set my phone down I put my wallet under it, but most of the time my phone is either in my hand or in my front pocket.
3. Dedicate one pocket to you phone (you can carry your wallet there too it it's soft), and NOT your back pocket. I'm a lightweight guy and I shattered the screen on my Atrix by sitting on it when getting into my car, turned out it wasn't as strong as my iPhone's 3GS screen was, so I don't do this anymore. Sounds stupid but I've knowingly sat on my phone thousands of times without it ever breaking... I just really like my phone in my back pocket. So now I keep my phone in my front right pocket with the screen facing my leg; keys and spare change go in left pocket.
4. Carry a microfiber pouch on you--I use this to clean the screen and to clean my sunglasses, and I store my sunglasses in it when stowing them away. Most cheap-o sunglasses stores around here will sell you one for 2 or 3 dollars, the nice ones feel like micro-suede...
5. Keep your hands & ears clean, I won't detail how to clean you ears and trim your nails but you get the idea :laugh:
Dead skin and pocket debris are the main things to get stuck in the speaker grills so if you're super anal you could keep your phone in a soft case with a drawstring before putting it in your pocket but that's kinda dorky, at the end of the day it's just a phone and you're probably gonna replace it with a better one in due time anyways so I say go naked and enjoy...
I bought this white back for the phone to see what i could do with it. I took the letters off because they were not stuck on there good. They came off with a dust can.
Decided to paint it a sliver color to match the frame as close as possible. I hand painted the inside of the letters black. I don't know what to do about the "M" yet, if i'm going to put one on there or not. Maybe something else, idk.
This is what I have so far. It looks like it has a brushed look to it. After I painted it, I scuffed it with a dish scrubber to give it that look.
Last thing I do, will be spray a satin clear.
That thread title though.
Looks good.
I thought I was on p&*#hub for a second...
EmperorX said:
I thought I was on p&*#hub for a second...
Click to expand...
Click to collapse
lol
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
dcemtp1 said:
You should think about selling one, I wouldn't mind paying for it! It looks awesome!
Click to expand...
Click to collapse
I'm going to see how this one holds up first. I have some ideas for other covers lol
just cleared it a bit ago. ended up using a matte clear. just going to let it dry really good and maybe polish it a lil before installing it.
looks pretty good
Would be nice to see it on your phone!
I like it
I just got around to installing it.
pics
Looks great
albert1500 said:
I just got around to installing it.
pics
Click to expand...
Click to collapse
I'd buy one from you if you decide to sell it
Definitely a cool option to have something unique like that.
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
literadesign said:
This does look cool. But I wonder what kind of spray paint you used and even more importantly what kind of clear coat are you going to use to withstand bending? When one removes and puts back on one has to bend this cover a bit and I'm not sure how well will paint and coat withstand this?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I used rust-o-leum paint and clear. I'm not worried about the bending. I'm taking this one off in the next few days.
I started another one with a different silver. I wont be reusing the current one.
FYI they make paint for plastic (bendable) it's mostly for bumpers on cars
I took the cover off earlier and the paint held up very well, i didnt bend the cover a whole lot to begin... i wasnt going to use it again so i decided it to test how much bend it would take and i had to bend it a lot in order for the paint to wrinkle.
I tried doing something similar for my daughter that got bored by the same old phone sleeve/case that was partially clearly transparent and partially frosted look.
I decided to paint the frosted part using RAL 9005 matte black spray paint. I haven't clear coated it yet as it was just an experiment. If it turns out to be ok I may coast it using some not so rigid coat to avoid cracking due to the rubbery nature of this sleeve.
She likes the end result. Me too. Unfortunately I'm not able to add images to my posts (haven't posted enough posts to XDA - apparently)
images.tapatalk-cdn.com/15/04/23/2214dce5a324e57d152757f716f672b9.jpg
Sent from my Galaxy Nexus using Tapatalk
How did you stick the back cover back on?
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
lotus49 said:
I'm curious to know what you used to stick the cover on with.
The reason I ask is that my first Nexus 6 came with the cover unstuck right out of the box. I returned it (partly because I was worried that the battery may have swelled) but I'd be interested to know how hard it would have been to stick the cover back down again.
Click to expand...
Click to collapse
Uuhm... i had thought the idea of seeing more than one back cover in some of the more recent photo's would have indicated it... but also in the first post he says he bought a white back cover a while ago to see what he could do with it. He didn't remove and replace the same back cover. Pretty sure that's NOT possible due to the adhesive... or at least risks the ability to put it back on firmly and smoothly.