[Q] Unable to enter bootloader - HTC Titan

I'm trying to enter bootloader but the phone just keep going into a loop. here is what I'm doing:
Turn the phone off
Press and hold the camera + power buttons at the same time
phone screen turns on, then vibrate, then screen goes off and keep doing the same thing over and over.
am I doing something wrong?
My device: USA AT&T HTC TITAN

Its Vol+ & Vol- with Power Button.
As In take battery out put it back in.. Hold Power along with both volume keys and couple seconds after the vibration the Bootloader shows up

Tachi91 said:
Its Vol+ & Vol- with Power Button.
As In take battery out put it back in.. Hold Power along with both volume keys and couple seconds after the vibration the Bootloader shows up
Click to expand...
Click to collapse
I wonder if in the european version is different, here is where i got confused: http://forum.xda-developers.com/showpost.php?p=19089173&postcount=1
Thanks a lot!

To get your phone into bootloader mode, you have to enter the unlock code first then when it reboots thats the time that you press the power + volume (+/-). I had the same issue with my at&t titan (sim unlocked).

Related

failed/ crashed while flashing rom

while flashing the phone crashed and turned off and wasnt possible to be turned on again. connecting to USB only turns the LED solid green while plugging directly into the wall will turn onto the motorola screen with boot failed 1. any help would be nice. thanks!
Can you get into recovery by holding Vol Down and hitting power and then pressing Vol Up to cycle to "Recovery"?
negative. phone will not respond at all. when not plugged into the wall outlet, it will not even turn on the display
tngay510 said:
negative. phone will not respond at all. when not plugged into the wall outlet, it will not even turn on the display
Click to expand...
Click to collapse
Have you taken out the battery for a bit and then put it back it to see if that works or tried a different Atrix battery?
Sent from my ATRIX using the Premium XDA App
i was able to force boot into fastboot by powering up and vol up but not recovery. the battery was died even after a whole day of plugging into the wall charger. while trying to follow some recoveries while in fastboot, i hit the wall with error 0x180004
Two things to consider
If you're able to get into fastboot, are you not able to press "Vol Down" again to cycle the different boot modes and to get into RSD?
And, if you can still get into fastboot, what recoveries have you tried? There's at least 3 different ones available.
i am only able to get to fastboot via power button and vol up. power button and vol down will just flash the screen then goes blank.
tngay510 said:
i am only able to get to fastboot via power button and vol up. power button and vol down will just flash the screen then goes blank.
Click to expand...
Click to collapse
What he mean is after you press vol up + power button and the phone display unlocked with fastboot menu, cycle with vol down to see the other menu.
Sent from my MB860
bimasakti85 said:
What he mean is after you press vol up + power button and the phone display unlocked with fastboot menu, cycle with vol down to see the other menu.
Sent from my MB860
Click to expand...
Click to collapse
Volume up and power button goes straight to fastboot. Volume down and power button goes to fastboot as 1st option, and from there you can use volume down to cycle through options and volume up to select.
fixed the problem by fastboot-w then force fastboot via power button + vol up and RSD lite 4.5.141

question about bootloops???

i haven't experienced this but in case it happens, what if the phone enters a bootloop, how does someone go about turning the phone off (since you cant battery pull) and get into the bootloader/recovery??
hold power key for about 10 seconds or so.don't let go until phone turns off.
EDIT: Here you go Page 24. It says Note: If the phone hangs and the touchscreen does not respond, press and hold "power" for about 10 seconds to restart the phone.
EDIT 2: Also found this here
Symptom #2:
If the device cannot power on, and seems that it cannot be charged, it could be that the device is not in default operation mode. This can be caused when the “volume up key” was pressed while pressing the “power” key when device was last powered down. To power on and off the device normally, please be careful to not hold down any other hardware key while pressing the power key during power up operations.
How to fix:
1. Press & hold the power button for up to ~ 20 seconds. The capacitive keys (three keys at bottom of screen) should begin flashing. This indicates that a reset is imminent. Continue to hold power until they stop flashing.
2. Release the power key
3. Press the power key again for 1 second. Wait a few seconds and the device should then power on
Sent from my EVO LTE using XDA
Yeah I don't think that actually helps with a true bootloop. Restarting the device is just looping another boot. lol.
Try just holding down the vol-down button through one of the bootloops. Not sure that will work ... but worth a try.

Atrix boot loop

I got an Atrix from a friend who was having problems with it.
I tried turning it on and it stays tuck in a boot loop with the "Dual Core Technology" screen.
I tried a couple of key combinations to see if I could get to fastboot but nothing works. So far I've tried the following combinations:
1. holding the volume up button while powering on
2. holding the volume down button while powering on
3. holding volume up + volume down while putting the battery in and then pressing the power button
4. holding volume up + volume down while putting the battery in and then letting go of volume down and pressing the power button
5. holding power and volume up button while putting the battery in
I also tried this. After holding down the volume up button and pressing the power button, i tried hitting the volume down button once and then hitting volume up, hitting it twice and then volume up, 3 times and volume up, etc. etc. and then plugging in the phone to the computer, just in case the fastboot menu was there but I couldn't see it, but that doesn't seem to work either.
As it stands right now, all I'm getting is the boot loop. The phone had been sitting around for a while so I'm not really sure what the history is so all I have to go off of is what I have in front of me.
I'd appreciate any help in the matter.
Can you tell more history of the phone?
Is it rooted?
Is the bootloader unlocked?
Which ROM is it running if it's running one?
Sent from my SGSIII with the XDA Premium App
Bruce Lee said:
Can you tell more history of the phone?
Is it rooted?
Is the bootloader unlocked?
Which ROM is it running if it's running one?
Sent from my SGSIII with the XDA Premium App
Click to expand...
Click to collapse
I'm pretty sure its not rooted and almost certain its the stock rom but I have no idea about the bootloader. My friend is not very tech-savy so I'm guessing that the bootloader is locked.
I have no way to verify any of this. All I have at this point is the phone that sits looping at the "dual core technology" screen.
If you have any ideas about which way to proceed from here, I'd greatly appreciate it!
What exactly is happening (down to the last detail) when you boot while holding Vol(-)?
ravilov said:
What exactly is happening (down to the last detail) when you boot while holding Vol(-)?
Click to expand...
Click to collapse
When I have the volume down button pressed while booting, the green led stays on for 4-5 seconds, then the phone boots to the dual core screen, it'll stay there for about 5-7 seconds, then go to the M logo with the ripples and then the screen goes black for a second and then it loops back to the dual core screen. Only, this time, there is no delay between the 'dual core technology' screen and the M logo with the ripples.
Try this:
1) Remove battery
2) Replace battery while holding volume down button
3) Navigate to recovery
Should get you out of the loop.
aerohp said:
I got an Atrix from a friend who was having problems with it.
I tried turning it on and it stays tuck in a boot loop with the "Dual Core Technology" screen.
I tried a couple of key combinations to see if I could get to fastboot but nothing works. So far I've tried the following combinations:
1. holding the volume up button while powering on
2. holding the volume down button while powering on
3. holding volume up + volume down while putting the battery in and then pressing the power button
4. holding volume up + volume down while putting the battery in and then letting go of volume down and pressing the power button
5. holding power and volume up button while putting the battery in
I also tried this. After holding down the volume up button and pressing the power button, i tried hitting the volume down button once and then hitting volume up, hitting it twice and then volume up, 3 times and volume up, etc. etc. and then plugging in the phone to the computer, just in case the fastboot menu was there but I couldn't see it, but that doesn't seem to work either.
As it stands right now, all I'm getting is the boot loop. The phone had been sitting around for a while so I'm not really sure what the history is so all I have to go off of is what I have in front of me.
I'd appreciate any help in the matter.
Click to expand...
Click to collapse
Maybe the easiest way to get make it work again would be to flash the original stock rom with RSDLite.
It's very easy, you just need to connect your phone via fastboot ( when powering on hold vol(-) key until it says fastboot), then press vol(+) and the computer will detect it.
Just remember to flash the correcto sbf for your phone, otherwise you will have another bootloop.
joelorona said:
Maybe the easiest way to get make it work again would be to flash the original stock rom with RSDLite.
It's very easy, you just need to connect your phone via fastboot ( when powering on hold vol(-) key until it says fastboot), then press vol(+) and the computer will detect it.
Just remember to flash the correcto sbf for your phone, otherwise you will have another bootloop.
Click to expand...
Click to collapse
Where do I get the stock rom?
How about you do some searching on your own for a change?
This time search for fruitcakes. That's the stock ROM.

[Solved] Can't get in fastboot anymore...

After a bad flash, I'm stuck at "htc One/beatsaudio" white screen, but unable to reboot in bootloader/recovery, even not power down...
Holding the power button a loooooooooooooong time makes softbuttons blinking, but nothing else happen...
Any idea?
Aaaaargh...finally solved...:victory:
I post "MY" solution, maybe it can help someone else (using the "search" functionality...)
Just press Power + Vol. Up + Vol. Down at the same time...:highfive:
The Other way: Press Power long time, until your phone gets off. After a second press and hold Vol. Down, press the power button and the phone starts in bootloader mode.
Neo XL said:
The Other way: Press Power long time, until your phone gets off. After a second press and hold Vol. Down, press the power button and the phone starts in bootloader mode.
Click to expand...
Click to collapse
Thank you, but I was starting this thread because it wasn't possible anymore to use the normal way: Power button 10 sec. and Power + Vol. Down to get in bootloader mode...
Sent from my HTC One X+ using xda premium

GApps error after installing Phone no longer starts.

Hi all.
I have a phone Samsung 920I not "L"
OK to start from the beginning. I am new to this and followed steps from watching Channel48 on YouTube. Not blaming him it's just so you have an Idia of where I got my info from.
Instlled Odin
I installed twrp-3.1.0-0-zeroflte.img and it didn't work.
I then found twrp-3.3.1-0-zeroflte.img and installed it over the top, Now works when booting into recovery.
I then installed 920F Samsung recover file that was only about 25Mb in size and got my phone working again.
left it for a day then tried again.
Installed twrp-3.3.1-0-zeroflte.img with Oden. works
Installed: EvolutionX_4.1.69_zerofltexx-10.0-20200331-0232-OFFICIAL Works I was happy Looked at "About" and it now says my phone is 920F :/ Andoird 10 cool it works so who cares if it says 920F right!!!
I then booted back into Recovery and Installed: open_gapps-arm64-10.0-pico-20200228 and that said it successfully installed and I swiped to restart the phone.
My phone powered off and that's where this ends.
I have tried holding the power button for about 30sec and nothing happens I tried plugging into the charger and it doesn't respond to show it's charging
Is there something I can do now or is the phone dead This is my main phone as I love the Samsung S6 over the rest because it has the main buttons, not on touchscreen and IR so I can use the phone as a remote.
Thanks
edit. update
I got my phone working again. I will leave this thread incase someone else asks the same thing.
How I got my phone to work again. This is what I found on Google search and I will BOLD the option that turned my phone on.
Press and hold Power button for more than 20 seconds to check whether it turns on your phone or not.
Press and hold Volume Up button for a few seconds and without releasing the Volume up button, press and hold Power button until your screen displays something.
Press and hold Volume Up button for a few seconds and without releasing the Volume up button, press and hold the Power + Home buttons until your screen displays something.
Press and hold Volume Down button for a few seconds, without releasing the Volume down button, press and hold Power button (totally 2 buttons) until your screen displays something.
Press and hold Volume Down button for a few seconds and without releasing the Volume down button, press and hold Power button + Home button until your screen displays something.

Categories

Resources