Related
I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Shaamaan said:
I really screwed up.
I wanted to update my phone to the latest Energy version, and during the flashing process, absent-mindedly thinking about continuing the setup sitting at the couch (as opposed to the computer), I detached the phone.
Now, when I turn it on, it just says "Software update failed! Please try again.", but I cannot access the coloured bootloader.
If I try to update again (or even do task29) everything goes fine, till the progress bar appears, which is stuck at 0%.
I've tried running an original HTC firmware img from the card, but then I get the following error:
0028002
NOT ALLOW
Please help!
EDIT: After that, the bootloader appears, so I thought about trying a regular update then. When I do that, the update fails telling me the update file is corrupt.
Click to expand...
Click to collapse
Hi,
I suppose you can put your HD2 in bootloader mode (three colour screen). If yes do task29 once again but with radio rom eg. 2.10.50.28_2. After that try to install different rom eg. omega, clarity etc.
Did you read my post?
I said it doesn't work. If I try to run task29 or anything, it WAS stuck at 0% endlessly.
I could only get to the bootloader when I tried to update from the card, and that failed too.
Now I can't enter the bootloader nor run any updates (they go to 1%, then report the updater is corrupt).
did u do HSPL?
i would double check
agent_47 said:
did u do HSPL?
i would double check
Click to expand...
Click to collapse
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Shaamaan said:
I already unlocked my phone before.
When I tried updating the original firmware from the card, that cleared the SPL, so now it seems to be the default. But when I tried to run HSPL now I get a wrong device code error.
Click to expand...
Click to collapse
unlocking is not the same thing as HSPL
updating stock ROM via sdcard will erase HSPL
go to bootloaded useing the volume key + power.
connect to USB and try and install the HSPL.
if it fails, try a different USB port\PC
if it still fails, can u post the text in tri color screen here
Sorry, when I meant "unlock" I meant the SPL thingy. I did not mean the carrier unlock, or whatever the technical term is.
Currently, I cannot access the bootloader at all.
Attempting to update with a freshly downloaded original HTC firmware gets the process stuck at 0%.
I managed to get to the bootloader...
It appears when I insert a card with LEOIMG, but it doesn't run the update from there, and appears to be STUCK at the bootloader (won't even show USB when the cable is connected).
Here's what it currently says:
HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Currently, the phone refuses to update the firmware using the LEOIMG from the card (won't even show the question), and any attempt to flash it normally results in the phone being stuck at 0%.
Trying to install HSPL says "incorrect device ID".
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
dashrink said:
Reformat the sd card with fat 32 or exfat put leoimg on there and press & hold volume down while turning phone on. Hope you get it working again....
Sent from my HD2 FroYo using the XDA app
Click to expand...
Click to collapse
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
EDIT 2: I fear that trying to update via the card or USB cable just won't work. As such, I pray there's a qualified support in my town, which can handle HTC phones and can brutally flash the software (as I reckon this is the only thing that can be done).
Shaamaan said:
I just tried this; the phone shows the bootloader and something extra in the corner (I didn't notice what it was) and is now stuck on "Loading...".
EDIT: Trying exFAT didn't reach that point at all. It got stuck on the bootloader saying that the software update failed. FAT32 was the one that got stuck on Loading.
BTW, I hope I'm not just very impatient, but if after 5 minutes it's STILL 0%, then I'd say chances are, something is wrong.
Click to expand...
Click to collapse
Hopefully it's not a hardware problem.
Find me on skype - pannet7. I can speak Polish.
Regards
Well, apparently HTC is rather unpopular in Poland... I found one place in my town (Poznań) where they were willing to give it a shot, but their HTC service technician is on vacation till Monday.
I can use the official warranty method, but that will take about a week, starting Monday as well.
If anyone has any more ideas, I'm all ears.
so... did yo manage to get it working ?
- just out of curiosity ..
AlCapone said:
so... did yo manage to get it working ?
- just out of curiosity ..
Click to expand...
Click to collapse
Same problem here, did you manage to get it working?
Hi,
I have a problem with my HTC HD2, thing is that the phone it's not booting correctly, all i got when i power on the device, it's an emty white screen... without the green HTC letters.
I got installed a cooked ROM, BsB Beast 6.1, with radio 2.12.50.02_2, and i was running Android from SD when all this **** started, two weeks ago. The phone battery ran out while i was on Android, a couple of hours later... i got home and plugged the phone for charging. When i pressed the power button, the phone boots with that blank screen.
I can get into the bootloader, and it's showing this info (whitout the underscores):
PB81100 HX-BC
SPL-1.42.HSPL XE
_____________0x05
_____________0x30
CotullaHSPL
I've tried many different things and none seems to do anything at all:
- First of all, i did a hard reset. The process ends OK but the phone stays doing the same
- Then, i tried to flash again the same ROM i was using. I was unable to do that by using CustomRUU and PC connection. The phone it's detected by the PC, and the bootloader screen shows that it's conneted by "USB". Then, i executed the CustomRUU app, following all the steps and, when the phone should start flashing the progress bar doesn't get past 0%, both the phone display and PC. After a few minutes, CustomRUU gives an error saying "timeout" connection. I've tried to do this from different USB ports and different PCs with the same result.
- After those fails, i tried to flash again the cooked rom from SDCARD. The process ends OK, saying "Update Complete". Then, i rebooted the phone but the blank screen remains the same way. That cooked ROM doesn't have radio.
- After that, i decided to flash a stock ROM. First, i tried to make a "Task 29" to the phone, but i got the same problem than with the cooked ROM. The progress bar doesn't get past 0%. With the stock ROM the problem was the same again. Then, i tried to flash the stock ROM from SDCARD. The process stops at X% saying 0018003 RADIO - FAIL. I've got this error each time i try to flash a ROM with radio or a radio itself.
- I was able to do a "task 29" by using MTTY, but nothing changes when i try to flash any ROM after that.
- i've tried to upgrade my HSPL, by using both HSPL2 and HSPL3. Both programs detects my version of HSPL, then the process starts and ends saying "Succesfully done" but nothing changes in my bootloader, it's still saying that i got 1.42.HSPL
Since i can get to the bootloader, i hope to have any chance to get this device back to life.
I've readed some posts here and within other forums, i've tried with many different cooked or stock ROMS but nothing works
I hope to find help here, thanks in advance and, sorry if my speaking it's not 100% correct
yet another "i was running android and...........now my phone won't boot".. thread. makes me glad i don't bother with android...tried it once and had to hard reset, never touched it since, heh.
for the sticking at 0%,and timeouts etc, try and always enter bootloader yourself, then wait for serial to become usb, and then run customruu. this way you can also visually confirm hspl is there(or not there, depending what you are doing) and it should cure certainly the timeouts.
if i were you, i'd concentrate on getting back to stock, and start over.(only skimmed your post, i'm mobile, so sorry if i say something you already did.)
get into bootloader, get rid of hspl if it s there,(run hspl2 and choose 1.66.0000) then back into bootloader(you should soon get used to holding vol down as each stage completes to reenter bootloader) then try flash your CORRECT stock rom via usb. if that fails try it using the sd card method.
Thanks for answering, samsamuel.
I haven't looked into the Android section for threads with the same problem i got, maybe i should have started that way
Each time I enter the bootloader, i'm doing as you've said (believe me... in these days i've become a "master" on pushing power button with vol. down )
I always wait for the bootloader to finish loading, then i plug the phone to my PC, wait again for "Serial" turns into "USB" and, then, start the flashing process.
I'll try to do what you said with HSPL2, to select 1.66.000. Each time i've tried with different HSPLs, i've selected 1.66.HSPL or 2.08.HSPL... so, i guess i should try with that.
I'll be updating this thread as soon as i got news.
/me edit
I must to say, that Android was running "fine" (some minor problems when trying to wake up the phone, but nothing critical apart from this disaster). By the record, i didn't have installed dual boot... the phone always boots into WinMo
Hi again,
I have tried to update my SPL to 1.66.000 without success, despite what HSPL2 says ("Succesfully done")
Any thought about this? I can't understand why those programs are saying "OK" but are doing nothing
thanks in advance
not seen it first hand but have read several threads where the update seems to work but nothing changes. not really sure as to cause or cure, sorry.
I wonder if is there a way to make HSPL2 / HSPL3 to leave traces or any log of what they are doing... in order to see why my phone is ignoring them
Little bump, looking for more help
Is this the right subforum to post this things?
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset
I am a new Android convert and purchased the Photon 4G last week. I successfully rooted, though I have not unlocked the bootloader. I flashed the Photon Laser 1.1 ROM, and then the Alien 1.1 Rom and theme. After noticing that I had no 3G/4G, I decided to revert to stock and avoid the Alien 1.1 for now. I went into Clockworkmod and wiped the dalvik cache, which I think was my major mistake, then in android recovery mode I wiped the cache 3 times, and did a factory restore. From this point forward I can not boot the phone successfully. Once it comes up to the tap the android to begin screen, I receive multiple error messages requesting the calander, phone, and other apps be force closed. I am unable to get into the phone at all. Additionally, if I tap the android icon, I can see the icon flex indicating my tap, but nothing happens. I've spent the last 6 hours attempting to use RSD Lite to reflash the stock image, but I receive an error each time stating "Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected." I need some direction from anyone that can help. Thank you in advance.
WEC2011 said:
I am a new Android convert and purchased the Photon 4G last week. I successfully rooted, though I have not unlocked the bootloader. I flashed the Photon Laser 1.1 ROM, and then the Alien 1.1 Rom and theme. After noticing that I had no 3G/4G, I decided to revert to stock and avoid the Alien 1.1 for now. I went into Clockworkmod and wiped the dalvik cache, which I think was my major mistake, then in android recovery mode I wiped the cache 3 times, and did a factory restore. From this point forward I can not boot the phone successfully. Once it comes up to the tap the android to begin screen, I receive multiple error messages requesting the calander, phone, and other apps be force closed. I am unable to get into the phone at all. Additionally, if I tap the android icon, I can see the icon flex indicating my tap, but nothing happens. I've spent the last 6 hours attempting to use RSD Lite to reflash the stock image, but I receive an error each time stating "Failed flashing process. Unable to retrieve initialization values from INI file. (0x7029); phone connected." I need some direction from anyone that can help. Thank you in advance.
Click to expand...
Click to collapse
Hey, I just wanted to confirm that you used RSDlite to flash the Final SBF release...45.2.5? And that didn't work? I've had issues with RSDlite attempting flash and then fail on me too. In that case, my phone would turn on into the Moto-boot logo, and then get stuck. I took the battery out and put it back in and it seemed to get me back into the phone after booting. Maybe you can try to reflash the final 45.2.5 update again?? Try using the cmd terminal to reboot or push files onto the phone? Sorry I don't know too much..I'm still really new to android.
I have followed the exact steps from this page: (http://forum.xda-developers.com/showthread.php?p=16328237), but every time RSD Lite fails with the error message I listed in the original post. I have pulled the battery several times, but am unable to get past the "tap the Android" screen. Tapping it leads to no change at all. I have no access to CWM anymore, and can only access recovery from Android recovery now, which I have used to reboot a few times at this point. When I reboot, I am greeted with errors that include "The process com.android.phone has stopped unexpectedly. Please try again." and "The application Suggestions Poll Scheduler Service (process com.motorola..suggestions.scheduler) has stopped unexpectedly. Please try again." and "The application Calander Storage (process com.android.calendar has stopped unexpectedly. Please try again."
WEC2011 said:
I have followed the exact steps from this page: (http://forum.xda-developers.com/showthread.php?p=16328237), but every time RSD Lite fails with the error message I listed in the original post. I have pulled the battery several times, but am unable to get past the "tap the Android" screen. Tapping it leads to no change at all. I have no access to CWM anymore, and can only access recovery from Android recovery now, which I have used to reboot a few times at this point. When I reboot, I am greeted with errors that include "The process com.android.phone has stopped unexpectedly. Please try again." and "The application Suggestions Poll Scheduler Service (process com.motorola..suggestions.scheduler) has stopped unexpectedly. Please try again." and "The application Calander Storage (process com.android.calendar has stopped unexpectedly. Please try again."
Click to expand...
Click to collapse
I know it's somewhere in this forum, but if you brick your phone and render it useless, you can try and reflash the original SBF...not the update. Give it a shot. Just let the force closes go, but see if you can connect to your computer. Best of luck!
Thanks, but I think that's what I was doing. Maybe it was the update. Can anyone point me to the original sbf? Thanks again for the replies.
http://www.multiupload.com/FNZKNV0T3G
thats the link, u need to unzip and then mount it on RSDlite
Thank you so much. I will download now and run it. Let you know if it finally works. Thank you for the link and help.
So nothing under the sun worked at all. I ended up having to take the phone back to the retailer and received a new one. I am happy now because after two days I have a functioning phone. I still believe that my error was clearing the dalvik cache before the factory reset, but I wouldn't have done that had the Alien ROM, which I mostly liked, hadn't killed my non-wifi data reception, as in I had none. Thank you the those of you who took time out to read and post a reply to help me. I am very grateful.
Help
Hey guys:
Yesterday I made mega mistake, I've flashed CM7 but... I didn't notice that I had to unlock the bootloader, obviously didn't work , but now, the phone is stuck on "unable to boot 2 entering RSD mode" with the Moto logo, so I tough, I will flash it again with the official Sprint update and fix the whole thing, but RSD gets to 100% restarts the phone and then phone shows just garbage! just like a blurry image, can't describe correctly but doesn't go any further. I've removed the battery start the phone again and then I get the same message "unable to boot 2 entering RSD mode". I'm on a loop right now, any advise will very appreciated, thanks'
Try flashing the 154_5 sbf...when in rsd mode...ive always had luck,with it as a starting point.
Sent from my MB855 using xda premium
KTT16 said:
Try flashing the 154_5 sbf...when in rsd mode...ive always had luck,with it as a starting point.
I will certainly give it a shot. I don't remember right now which file is the one that i got, I'm at work, but took me about 2 days in a row to download the file on my 128 kbps connection... third world connection.. I know.
Something that I would like to know is, when I turn the phone on takes directly to the error, if I press power + volume up then takes me to fast boot and stays there and if I do power + volume down gives a messages for about 1 second goes away and the phone goes like dead... I have to remove the battery to get it going again. Is there anything else that I need to know?.
thanks'
Click to expand...
Click to collapse
you need to get into rsd mode by powering up + volume up but use rsd verion 5.5 when connecting to the computer. Then after run the sbf and wait till it asks to manually power up the phone..pull battery and ur golden.
Make sure youre fully charged and have allege drivers installed properly.
Sent from my MB855 using xda premium
KTT16 said:
you need to get into rsd mode by powering up + volume up but use rsd verion 5.5 when connecting to the computer. Then after run the sbf and wait till it asks to manually power up the phone..pull battery and ur golden.
Make sure youre fully charged and have allege drivers installed properly.
You're the man!!!, I've dowloaded the file you told me and RSD 5.5 and I'm back in bussiness. I just unlocked the bootloader... ready to try CM7, yay!.
Thank you for your support, best regards.
Click to expand...
Click to collapse
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?