If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Related
Resurrection v1.7 Installation aborted
I'm unable to update to Resurrection v1.7 from v1.5.
I'm getting the following failed messages before saying Installation aborted:
Code:
assert.failed:getprop("ro.product.device")=="galaxys2" || getprop("ro.build.product")=="galaxys2
etc...
"
I did:
- wipe data/factory reset
- wipe cache
- wipe dalvik cache
and still it won't flash.
Should i flash 1.6 then 1.7?
Cheers,
Simon
Download the rom again .
jje
yup go as jje said and delete the old rom stored on sd and save the fresh copy..
sayo9394 said:
Resurrection v1.7 Installation aborted
I'm unable to update to Resurrection v1.7 from v1.5.
I'm getting the following failed messages before saying Installation aborted:
Code:
assert.failed:getprop("ro.product.device")=="galaxys2" || getprop("ro.build.product")=="galaxys2
etc...
"
I did:
- wipe data/factory reset
- wipe cache
- wipe dalvik cache
and still it won't flash.
Should i flash 1.6 then 1.7?
Cheers,
Simon
Click to expand...
Click to collapse
Flash westcrip's CWM stock kernel
Reboot
Reboot to CWM
Flash Remix 1.7
wipe cache & dalvik
Reboot
EDITED : posted the CWM stock kernel
Gimme a like it's work for you
Yup do exactly as HK Tang said
Users have some problem flashing .zip files without CM9 Kernal
Press Thanks if my post if un-helpfull !! So i should know i am still NoOb
Thanks guys
Thanks guys for replying and trying to help.
Unfortunately, i'm still unable to flash 1.7. It's not a big since 1.5 is really stable for my day to day usage.
I have tried the following without sucess;
- flashed CM9 kernel (was successful)
- Downloaded the Resurrection 1.7 ROM again
- copied the zip to both internal and external (sd card)
- flashed 1.7 ROM (with no success, assert fail, Installation aborted)
EDIT
Sorry guys I'm an idiot!
Hk.Tang said:
Flash westcrip's CWM stock kernel
Reboot
Reboot to CWM
Flash Remix 1.7
wipe cache & dalvik
Reboot
...
Click to expand...
Click to collapse
I kinda forgot the *REBOOT to CWM* step! OOPS! How embarrassing!
Thanks Hk.Tang for the help. and thanks everyone for replying
Check link for img
https://plus.google.com/photos/100106473084399572659/albums/5736420420980885281/5736420420063646994
sayo9394 said:
Thanks guys for replying and trying to help.
Unfortunately, i'm still unable to flash 1.7. It's not a big since 1.5 is really stable for my day to day usage.
I have tried the following without sucess;
- flashed CM9 kernel (was successful)
- Downloaded the Resurrection 1.7 ROM again
- copied the zip to both internal and external (sd card)
- flashed 1.7 ROM (with no success, assert fail, Installation aborted)
EDIT
Sorry guys I'm an idiot!
I kinda forgot the *REBOOT to CWM* step! OOPS! How embarrassing!
Thanks Hk.Tang for the help. and thanks everyone for replying
Check link for img
https://plus.google.com/photos/100106473084399572659/albums/5736420420980885281/5736420420063646994
Click to expand...
Click to collapse
Great Enjoys 1.7 fren .
Only problems with this rom. Now i cant download any zip file from web, or cant use programs like wifi transfer and air droid, it always fails when transfering files....
Will this ever be (big) bug free i am asking myself
sh00kre said:
Only problems with this rom. Now i cant download any zip file from web, or cant use programs like wifi transfer and air droid, it always fails when transfering files....
Will this ever be (big) bug free i am asking myself
Click to expand...
Click to collapse
Try another kernel,mate.
latest siyah kernel
download the latest siyah kernel from here...
Code:
http://www.gokhanmoral.com/gm/2012/04/24/siyahkernel-v3-1-2/
then flash it thru CWM
problems solved- simples
there is a 3.1.2-2 beta version but the one I posted above is the latest stable version, I'm using- in fact its the only kernel I will EVER use
Previously i tried reflashing rom, and also with siyah rc6 kernel where everything worked well.... I think its rom related, or something about my phone...
Try wipe data, wipe cash and wipe dalvik from recovery menu. Then flash 1.7 again
Verstuurd van mijn GT-I9100
blade30p said:
download the latest siyah kernel from here...
Code:
http://www.gokhanmoral.com/gm/2012/04/24/siyahkernel-v3-1-2/
then flash it thru CWM
problems solved- simples
there is a 3.1.2-2 beta version but the one I posted above is the latest stable version, I'm using- in fact its the only kernel I will EVER use
Click to expand...
Click to collapse
My phone would refuse to flash at all with the siyahkernel - what i do is flash back to 1.5 and then reboot recovery - THEN install 1.7 and flash siyahkernel back if you want
Hi,
I wanted to flash a new rom (Pure AOKP v2.0 Spike 6)
Had ICS Litening rom before.
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also another rom (http://forum.xda-developers.com/show....php?t=1460702)
Installation successfull but always freeze after reboot.
Default procedure if you can't get past a bootloop/etc. - flash a stock ROM and try again. Additionally, check the links in my signature.
screamworks
edit: msg deleted.. wrong thread
T4mpon said:
Hi,
I wanted to flash a new rom (Pure AOKP v2.0 Spike 6)
Had ICS Litening rom before.
I copied the zip file on my external SD
made wipe data/factory reset
wipe chace
and wipe dalvik
then installed from zip file.
But when rebooting the S2 freezes on the first bootscreen with the yellow triangle. I forgot to turn on debugging mode bevore wiping. Is that the prob?
What can I do now? Tryed also another rom (http://forum.xda-developers.com/show....php?t=1460702)
Installation successfull but always freeze after reboot.
Click to expand...
Click to collapse
Try using a ROM Nuke script before flashing the custom ROM mate. :good:
I have flashed cm7 and it worked successully, the stable version, minus that the google play store was getting a server error. Anyway im trying to upgrade to cm9, i flashed boot.img and in cwm i flashed cm9, and gapps. But when it starts and android upgrades etc i am stuck at "unfortunately setup wizard has stopped working"" any help? i dunno what to do
Did you make factory reset? Wiped dalvik cache?
Sent from my Xperia Arc S using xda premium
Someguyfromhell said:
Did you make factory reset? Wiped dalvik cache?
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
yes i did :/
Just restart the phone and see if it works, else just reinstall the ROM, i.e. Do a factory reset + wipe cache partition + format system + wipe Dalvik cache, followed by installing the ROM followed by installing gapps and then reboot.
hmnk said:
Just restart the phone and see if it works, else just reinstall the ROM, i.e. Do a factory reset + wipe cache partition + format system + wipe Dalvik cache, followed by installing the ROM followed by installing gapps and then reboot.
Click to expand...
Click to collapse
ok thanks, also i have to flash the ftf file they said to use as baseband first right?
sutty23 said:
I have flashed cm7 and it worked successully, the stable version, minus that the google play store was getting a server error. Anyway im trying to upgrade to cm9, i flashed boot.img and in cwm i flashed cm9, and gapps. But when it starts and android upgrades etc i am stuck at "unfortunately setup wizard has stopped working"" any help? i dunno what to do
Click to expand...
Click to collapse
this happens randomly for CM9, the wizard will restart if it doesn't you can try my method(assuming you have all the files in your SD card)
1.Flash stock Rom (2.3.4)
2.install CWM and root
3.Flash Kernel
4.flash Baseband
5.Go to CWM, restore to factory defaults, clear cache and dalkiv(optional)
6. flash CM9 then G-apps then Accelometer fix(optional)
7. reboot
again the setup wizard my crash or stop but it'll restart and work
goodluck!
tokaides said:
this happens randomly for CM9, the wizard will restart if it doesn't you can try my method(assuming you have all the files in your SD card)
1.Flash stock Rom (2.3.4)
2.install CWM and root
3.Flash Kernel
4.flash Baseband
5.Go to CWM, restore to factory defaults, clear cache and dalkiv(optional)
6. flash CM9 then G-apps then Accelometer fix(optional)
7. reboot
again the setup wizard my crash or stop but it'll restart and work
goodluck!
Click to expand...
Click to collapse
thx for help, btw ermmm im installing gapps-ics-20120429-signed, is that correct?
well thats it i give up, thanks for all the help but i keep getting the same setupwizard stopped error, and it wont go away although i did exactly as u said step by step :/ damn...back to real ics 5.1
sutty23 said:
well thats it i give up, thanks for all the help but i keep getting the same setupwizard stopped error, and it wont go away although i did exactly as u said step by step :/ damn...back to real ics 5.1
Click to expand...
Click to collapse
Well all you have to do is change the gapps version... you downloaded the wrong version dude...
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
rahulbrand said:
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
Click to expand...
Click to collapse
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Christiaan91 said:
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Click to expand...
Click to collapse
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
Can you give us a step by step program of what you're doing when install a new rom?
Christiaan91 said:
Can you give us a step by step program of what you're doing when install a new rom?
Click to expand...
Click to collapse
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
And what does the op say?
"1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot"
In stead of step 1 i would suggest:
Mounting /system, /data and /cache
Format /system, /data and /cache
Then proceed with step 2 etc...
Everything will be lost so make a back-up with titanium backup. (don't back-up/restore system apps)
Clean Install
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
flasherruts said:
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
Click to expand...
Click to collapse
Worked Fine...Thanks..
Hi All,
after about 8 months of purchase my first smartphone, I decided to go to the modding with the Resurrection Remix Westcrip. In recent updates I have several problems:
1) Unfortunaly, com.androidsistemui the process has stopped. I tried to reinstall the ROM and Gapps Light-I checked again the warning. This time the message after pressing the ok button is gone and the phone is not locked but I did do an update to the patch Google service and I believe that we have solved the problem but after going on settings, about phone and having looked at the version of the Resurrection Remix is the previous version. Why?
2) Settings / Tools Resurrection / Resurrection Remix Update / Install App and I understand this (see photo of the screenshots).
I solved the first point .. but what can you tell me about the screenshots I posted?
with the installation of the latest release I have the same problem again. Why?
Hi all,
I have updated to version 5.0.8 and RR reboot gets me off the window with words com.androidsistemui has stopped.
I've tried using the GS2ROMNuke but the result has not changed the same window, I tried to make several times a Deep Clean but nothing to make the problem remained. I wanted to download the firmware for the Italian Jelly Bean XWLS and I reinstalled using Odin. Once this is done, I installed the latest version of the RR and restart interlock no window. But is it possible that every time I have to upgrade to the latest version I have to start again from the Jelly Bean using Odin and then repeat the procedure for installing the updated RR? Could someone kindly explain why? Thanks in advance.
lucasscott2872 said:
Hi all,
I have updated to version 5.0.8 and RR reboot gets me off the window with words com.androidsistemui has stopped.
I've tried using the GS2ROMNuke but the result has not changed the same window, I tried to make several times a Deep Clean but nothing to make the problem remained. I wanted to download the firmware for the Italian Jelly Bean XWLS and I reinstalled using Odin. Once this is done, I installed the latest version of the RR and restart interlock no window. But is it possible that every time I have to upgrade to the latest version I have to start again from the Jelly Bean using Odin and then repeat the procedure for installing the updated RR? Could someone kindly explain why? Thanks in advance.
Click to expand...
Click to collapse
Did you flash RR 5.0.8 on top of stock 4.1.2?
lucasscott2872 said:
Hi all,
I have updated to version 5.0.8 and RR reboot gets me off the window with words com.androidsistemui has stopped.
I've tried using the GS2ROMNuke but the result has not changed the same window, I tried to make several times a Deep Clean but nothing to make the problem remained. I wanted to download the firmware for the Italian Jelly Bean XWLS and I reinstalled using Odin. Once this is done, I installed the latest version of the RR and restart interlock no window. But is it possible that every time I have to upgrade to the latest version I have to start again from the Jelly Bean using Odin and then repeat the procedure for installing the updated RR? Could someone kindly explain why? Thanks in advance.
Click to expand...
Click to collapse
when i update my RR rom to 5.0.8 from 5.0.7 i will gt the same com.androidsistemui has stopped....
but if i do clean installation(wipe data)....those com.androidsistemui working fine.....
i believe that is RR rom update issue...hope they will fix it soon...
April 24, 2014
"Due to continuous com.android.sistemui has stopped I decided to abandon the Resurrection Remix and install a new Rom. I chose the MIUI and I can tell you that I do not hateful window is checked .. It 'was great to be of your .. shame because I liked so much this Rom"
Today
The saying that it is said that the first love you never forget it ... I went back to the RR with version 5.1.2 and I was happy because that hateful com.android.sistemui window has stopped no longer appeared even with version 5.1 .3
But when I decided to upgrade to version 5.1.4 variants 20140602 and 20140603 my worst nightmare has reappeared. As in the Changelog there is no record regarding the installation I did not do any full wipe.
How do I have to do?
Looks like whenever you update, a clean install is not happening. When you tried gs2romnuke, did you also flash gs2romwipe?
I will update when I have the Rom I always look before the Changelog to see if there is any directive then step to install the Rom behaving accordingly:
If required a full wipe / wipe :
I go into Recovery Mode
I make wide data, wipe cache, advanced> Dalvik Cache
Mount and Storage> Format System
Flash Rom
Flash Gapps
Reboot
If you do not need a full wipe / wipe :
I go into Recovery Mode
Flash Rom and / or Gapps (in practice only what is updated)
I make Wipe Cache
I make Dalvik Cache
Reboot
Something wrong?
------ April 03, 2014---------
I updated to the latest version of the problem is repeated .... I made a GS2Nuke but to no avail .... I tried again to start from the Samsung Custom Rom and then upgrade to the latest version but nothing to make me appear more com . androidsistemui has stopped ...... I'm pissed off .. someone could help me?
-------April 04, 2014---------------------
I downloaded the firmware XWLS and I installed it by performing a "Deep Clean". Then I reinstalled the RR (as if for the first time) and odious window does not appeared to me .. I hope now to enjoy the RR
And 'it possible that with each update I have to start from scratch by installing the version of Jb then move on to the latest version of RR?
---------------April 24, 2014-----------------------
Due to continuous com.android.sistemui has stopped I decided to abandon the Resurrection Remix and install a new Rom. I chose the MIUI and I can tell you that I do not hateful window is checked .. It 'was great to be of your .. shame because I liked so much this Rom
I don't think it was rom's problem. There are a lot of happy users, including me.
Can't blame rom just coz we can't pinpoint the issue.
Some time ago I tried the GS2RomNuke not getting the expected results ........ at this time in desperation I tried it with GS2RomWipe and it seems that everything has gone for good ...... I'm restarting .... at the first reboot is coming out the window .. I'm trying again with another restart .... this time no window ...
I do not want to denigrate this Rom. However, or the fault of the ROM or my Samsung does not own the digests. But do you think it is possible?
Did you try nuke and wipe scripts at separate flashes?
I read it in the op of that thread that flash nuke first, then wipe script and then the rom.
I have difficulty understanding what you're telling me ... Could you tell me in detail the steps to be carried out? Thanks in advance..
Your post gave me an understanding that you flashed nuke script once and then the rom. When that didn't work out,next time, you tried wipe script and then the rom. However the correct process would be..
1. Nuke script
2. Wipe script
3. Rom
Wipe script would be the set of wipe data / factory reset, wipe cache and wipe Dalvik cache?
I wanted to ask one more thing and covers the proper way to flash a rom.Te I ask because I have come to doubt ... I knew that this was the order of execution to start with a clean (full wipe) :
Get into Recovery Mode
Perform wipe data / factory reset, wipe cache and advanced> Wipe Dalvik Cache
Mount and Storage> Format System
Flash Rom
Flash Gapps
reboot
Then a moderator Italian guide told me that this was incorrect and that I should do so:
Get into Recovery Mode
wipe cache, wipe Dalvik, wipe data (factory reset) with this order
install rom
install gapps
wipe cache, wipe Dalvik
reboot
I'm confused ......
I don't remember exactly what else the wipe scripts wipes apart from the things you mentioned. Still it's better to follow the op written by the script creator. You can open those scripts with notepad and check.
About the order of wipes you got from the Italian guy, I am not very sure. My wipes are usually in random order and I never had unclean flash problems.
Thank you guys for trying to help me .... but after the shock announcement of the team to abandon the development Resurrection Remix I hope that with the search for a new Rom is more lucky ...
Carry the shock announcement:
This is it!
Resurrection Remix v5.1.5 will be last version in Resurrection Remix Kitkat ROM series. It will be android 4.4.2 based ROM. This last version is our way of saying goodbye and bidding farewell to an amazing journey we had with everyone.
Resurrection Remix team is thankful to all its users, supporters, fans and contributors for making Resurrection Remix such a successful aftermarket custom android ROM.
:crying::crying::crying::crying: