Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
rahulbrand said:
Just installed Resurrection Remix v5 kitkat 4.2.2
Awesome....Really Stable..
But when 8 reboot the phone..
It got struck at the screen where GTI9100 GALAXY S2 is written.
I can reboot to recovery but my Android is not booting...
I also tried cm10.2 kitkat but same issue
Need help....Really need kitkat
Click to expand...
Click to collapse
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Christiaan91 said:
In some rare occasions my phone also gets stuck at the booting logo, but holding power down and restart the phone solves my problem.
Did you preform a clean install?
Click to expand...
Click to collapse
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
Can you give us a step by step program of what you're doing when install a new rom?
Christiaan91 said:
Can you give us a step by step program of what you're doing when install a new rom?
Click to expand...
Click to collapse
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
And what does the op say?
"1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot"
In stead of step 1 i would suggest:
Mounting /system, /data and /cache
Format /system, /data and /cache
Then proceed with step 2 etc...
Everything will be lost so make a back-up with titanium backup. (don't back-up/restore system apps)
Clean Install
rahulbrand said:
yes I cleaned using philz kernel then flashed kitkat compatible kernal and installed..
When I stuck at logo what should I do..???
Is it a bug??
Click to expand...
Click to collapse
rahulbrand said:
Selected clean to install a new rom
wiped dalvik cache
Flahed kitkat compatible recovery
Installed rom
installed gaaps
Click to expand...
Click to collapse
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
flasherruts said:
okay.what you do is not enough . and as you mentioned , you need to reboot recovery(under advanced ) after you flash the compatible recovery .
I recommend ..
1) flash compatible recovery ( http://forum.xda-developers.com/showthread.php?t=2546597 ) and reboot recovery
2)wipe data
3)wipe cache
4)wipe dalvik cache(in advanced )
5)go to mounts and storage and format system , data , cache
6) flash the rom and compatible gapps and leave the rom after flashing for like 10 minutes ( leave it in the recovery , untouched )
7) after you are back , reboot system and let the rom boot up .
8) after it boots up and you set it up ( like setting time , date , account ) leave the rom untouched again .. say for an overnight so that it gets the time to settle .. the next day .. start customizing and installing apps like you did .
P.S. : I would recommend not to flash a custom kernel as of yet as kernels are in beta stages as of now
All the best !
Click to expand...
Click to collapse
Worked Fine...Thanks..
Related
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Wipe phone
Boot to recovery go to mounts and storage format cache data and system also format sd card but this will wipe sd card .
Phone will no longer boot remove battery then replace and boot to download mode .
Via Odin flash stock rom .
jje
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
nikzDHD said:
What kernel are you using? Go into Download mode as jje said and flash a stock firmware, then flash CF root then flash away with custom roms.
Click to expand...
Click to collapse
i am using cf root kernel , and i will try to do as jje said
http://forum.xda-developers.com/showthread.php?t=1291282
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
gr4ndm4st3r_bl4ck said:
Flash a stock kernel+rom with odin , flash a cf-root then use clockwordmod recovery ( enter CWM manager in apps drawer and boot to CWM )
-wipe data
-wipe cache
-install zip from internal sdcard
-DO NOT REBOOT ( at least if you want CyanogenMod )
-install zip from internal sdcard (again , due to a bug)
-reboot
report back here when you try it
Click to expand...
Click to collapse
not working , i already tried this method with MIUI
Which of the many versions of the SGS2 do you have?
xperia ray said:
Hi ,
I installed many roms , cyanogenmod , miui, lightning rom
but no one is working , all stuck on boot screen
currently i have android 2.3.5 xxki4 rooted firmware
i tried every thing , wipe cache before installing rom and etc etc but no rom booting , all stucks on boot
please help
Click to expand...
Click to collapse
This is for the international I9100:
Data/factory reset,wipe cache, wipe dalvik cache, format system, data and cache in mounts and storage. flash cm7 twice in a row without rebooting and flash google apps.Reboot and done
Enable usb-debugging first before flashing and backup you current rom and apps.
Maybe you have a I9100G, all the roms don't work.
prodygee said:
Maybe you have a I9100G, all the roms don't work.
Click to expand...
Click to collapse
i have galaxy s2 gt i9100, unlocked international version
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686
I root my Phone With "CF-Auto-Root-m0-m0xx-gti9300"
I instal Recovery ( I try many recoverys CWM 5.xx 6.xx and TWRP ) All are working good
Everytime when I try to flash a custom rom with or without aroma all the proces are working good but when I rebot, the phone stay at samsung logo .(retry flash not help)
I can install just with Odin stock firmware.
In recovery i can instal diferent mods in stok firmware and that works good ,but when i try to instal a full rom ,custom rom ,after instal and rebut the phone stay at samsung logo
What i do wrong ? What can i do to be able to instal a custom rom ?
Please help
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
convict_moody said:
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for reply
I do what you said but i don't wait 15 - 20 min . I wait about 5 -10 minutes and i removed the battery
Recap . I understand that I should wait 20 minutes with the phone showing samsung logo ? Nothing else . Isn't it ?
boomboomer said:
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
Click to expand...
Click to collapse
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
mihaitosca said:
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
Click to expand...
Click to collapse
Yes, 5.18 doesn't flash properly for some reason.
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
blahsum said:
Hi guys,
I successfully followed the advice on this thread (http://forum.xda-developers.com/galaxy-s2/help/to-mod-s2-t3189884) and I have installed CM12.1 's nightly from 29/8.
I boot in once, no problem. But on the second boot the phone bricks. The only way I can get into the system again is to load Philz kernel again and reinstall. But after the second boot the phone bricks again.
Any ideas? It may be the nightly, but even updating to the latest (31/8) didn't fix this.
I can get the CM10.1 stable to work fine, but that drain my battery faster than I can charge it.
I'd like to use 12.1, though: am I just doing something wrong that causes the bricking?
thanks,
Click to expand...
Click to collapse
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Sureshtuty said:
Clean install the rom!!
1.At first Flash stock rom
2.flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Click to expand...
Click to collapse
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
blahsum said:
When you say I should flash the rom, do you mean I should unzip the stock and push it with Heimdall/Odin?
Click to expand...
Click to collapse
I mean before flashing any custom rom flash stock rom then flash that rom which u want.
1.download stock firmware flash it with odin
2.then flash philz kernel
3.Reboot to recovery
4.Wipe Cache Partition and Dalvik/ART Cache
5.Now click on Clean to Install New ROM
6.Install the rom
7.Reboot system
Don't forget to hit the thanks button
Excellent, thank you!
A few tips to anyone looking this up:
First, I used Heimdall - but apparently Odin is quite similar.
I had to unpack the stock rom and then individually flash the factoryfs and zimage files.
I then unpacked the Phils mod and flashed the zimage again.
That was all in download mode
After that I flashed CM12 in recovery mode.