Related
like the title
im having difficulties in adding the sound file into my animation
can anyone help out?
btw the file attached
it consists of pictures, sound file(in OGG and mp3 format) just in case
Sound at boot is a sound file type OGG for ICS or WAV for GB located in System/Etc as POWERON file .
jje
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
lamfe1991 said:
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
Click to expand...
Click to collapse
JJEgan told you what you needed to know...
/system/etc/PowerOn.ogg
So rename your .ogg file to PowerOn.ogg, and put in in /system/etc.
Though, some custom ROMs don't appear to support boot sounds. Since you say you're on 4.0.4, I have to assume you're on a custom ROM, since Samsung has only released up to 4.0.3 in terms of Samsung stock firmwares.
Thx for ur advice
I follow exact the same as u guys advise but its not working
From the very beginning, it has no boot sound at all after i rooted and flashed. Would that differ the settings?
lamfe1991 said:
Thx for ur advice
I follow exact the same as u guys advise but its not working
From the very beginning, it has no boot sound at all after i rooted and flashed. Would that differ the settings?
Click to expand...
Click to collapse
Try re-reading the last paragraph of my last post.
so im dead man any recommended ROM that supports boot sound?
lamfe1991 said:
so im dead man any recommended ROM that supports boot sound?
Click to expand...
Click to collapse
Not from me. I don't recommend ROMs, because that always leads to a "what's the best ROM" debate, which usually ends up getting the thread locked.
(refer to this)
If you want a guarantee that boot sound will work, then flash back to stock.
Might be worth converting to OGG rather than renaming . Might be worth reading the faq for whatever rom you use.
jje
lamfe1991 said:
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
Click to expand...
Click to collapse
i donno when u guys will learn how 2 post with relavent stats like which custom/stock rom ur into its ver the kernel ur using etc at least u can put the same in ur signature so that people find it easy 2 resolve ur issue please edit ur op properly with all this first and remember the same when u post next
ps: if ur using a latest AOKP base rom like rr v1.9.1 then boot sound is not there and even if u put the same in ur bootanimation.zip it will not wrk
Sun90 said:
i donno when u guys will learn how 2 post with relavent stats like which custom/stock rom ur into its ver the kernel ur using etc at least u can put the same in ur signature so that people find it easy 2 resolve ur issue please edit ur op properly with all this first and remember the same when u post next
ps: if ur using a latest AOKP base rom like rr v1.9.1 then boot sound is not there and even if u put the same in ur bootanimation.zip it will not wrk
Click to expand...
Click to collapse
Agree difficult to work out an answer in fact nearly as difficult as reading your post in mangled Engrish .
jje
sorry jje but this forum in not only for perfect english talking guys - see my broken english - i´m german but i understand what is talking here
regards
mekoa8 said:
sorry jje but this forum in not only for perfect english talking guys - see my broken english - i´m german but i understand what is talking here
regards
Click to expand...
Click to collapse
I don't think he's talking about broken English, exactly. More the insistence of some members to type "English" (some call it "text talk") like:
u = you
ur = your (or sometimes you're)
wat = what
don = don't
2 = to (or sometimes too)
wrk = work
eva = ever
abt = about
neva = never
wiv = with
kno = know
and so on, and so forth.
I personally find this really irritating, (but nonetheless, I can still generally read it) and I know that many other members who can manage to decipher it feel much the same way... but to many non-native English speakers, it makes it especially hard. Plus, it makes it so the bulk of posts that are comprised of such nonsense will not run through Google Translate, so any non-English speakers who don't speak or read any English at all, REALLY won't understand.
So even though people who post in such a manner may be trying to be helpful, it sometimes ends up being counter-productive.
Edit to add: This is just my opinion, by the way... I'm not trying to flame, or say that Sun90 wasn't being helpful - he was, and he by far is NOT the worst perpetrator I've seen doing "text talk"; I'm just saying that some don't seem to consider how difficult it can be for non-English speakers when they post using "text talk" or use abbreviations, or even slang that could be common to a specific country or region.
ctomgee said:
I don't think he's talking about broken English, exactly. More the insistence of some members to type "English" (some call it "text talk") like:
u = you
ur = your (or sometimes you're)
wat = what
don = don't
2 = to (or sometimes too)
wrk = work
eva = ever
abt = about
neva = never
wiv = with
kno = know
and so on, and so forth.
I personally find this really irritating, (but nonetheless, I can still generally read it) and I know that many other members who can manage to decipher it feel much the same way... but to many non-native English speakers, it makes it especially hard. Plus, it makes it so the bulk of posts that are comprised of such nonsense will not run through Google Translate, so any non-English speakers who don't speak or read any English at all, REALLY won't understand.
So even though people who post in such a manner may be trying to be helpful, it sometimes ends up being counter-productive.
Edit to add: This is just my opinion, by the way... I'm not trying to flame, or say that Sun90 wasn't being helpful - he was, and he by far is NOT the worst perpetrator I've seen doing "text talk"; I'm just saying that some don't seem to consider how difficult it can be for non-English speakers when they post using "text talk" or use abbreviations, or even slang that could be common to a specific country or region.
Click to expand...
Click to collapse
hey sorry for the same mate will be more specfic with my words next time so that it will not trouble people in any way
Android 4.0.4 ICS on samsung wave I S8500 ROOTED
Its been hardly a week now Android on Samsung wave 1 S8500 is Rooted
yes you heard me, its ROOTED, that means more functionality from your Samsung wave phone.
thanks to xda Devs they have created a new zImage for your android
The touch calibration has been made, so the left part of your screen which was facing touch issues is resolved now.
Steps
1) Copy and replace this zImage in your phone memory with this one here >> http://data.hu/get/5295695/zImage (Use the “Lassú letöltés” button in mid page to download).
2) use unlocktroot tool to root your wave >> http://www.unlockroot.com
3) Download unlockroot tool from above link and install
4) Connect ur android on samsung wave to pc, make sure usb debugging is on
5) Click on root
6) it will ask to install a driver, click on install driver anyway , the second option (in win 7)
7) Wait for root to complete
3) Done
Enjoy
DONATE ME
http://forum.xda-developers.com/donatetome.php?u=4667743
done
everything is ok but cant overclock more than 1gzh....
It seems that the overclock possibilities depend on the programm you choose (due to processor recognition I would say).
So try several programms. If it still doesn't work try to change the device name to GT-I9000 Galaxy S.
ok, but are you sure is it "GT-I9000 Galaxy S" ? becouse i read build.prop of Froyo(previous wavedroid) and here is write only "GT-I9000", so i rewrite this, but some apps don't work still(quadrant benchmark works, Tegrak overclocking don't work). Have you another idea?
zmajster01 said:
ok, but are you sure is it "GT-I9000 Galaxy S" ? becouse i read build.prop of Froyo(previous wavedroid) and here is write only "GT-I9000", so i rewrite this, but some apps don't work still(quadrant benchmark works, Tegrak overclocking don't work). Have you another idea?
Click to expand...
Click to collapse
No your right it is "GT-I9000". I should have had a "," between. I said Galaxy S only to inform.
Anyway maybe those apps doesn't work also on galaxy S, do they ?
To overclock there is also the possibility to modify kernel, but I don't know how to do that, maybe we can take the setting from the old overclocked kernel and apply them in the new one ?
yes, yes, i agreed, but i too shor to do this, maybe wavedroid team made some magic for us noobs (not everybody, just me)
unlockroot donst recognize my phone any idea what should i do ?
blachy123 said:
unlockroot donst recognize my phone any idea what should i do ?
Click to expand...
Click to collapse
Did you install the drivers properly ?
Can you specify a bit more ?
nvm i fixed it
Be sure to get USB Debugging On !!
can anyone upload the unlockroot program? download not working anymore
~MaX~ said:
can anyone upload the unlockroot program? download not working anymore
Click to expand...
Click to collapse
http://mediafire.com/?b4m6swdddnq5bd9
http://www.putlocker.com/file/DA0F15FD0CC74682
yasotharan13 said:
Android 4.0.4 ICS on samsung wave I S8500 ROOTED
Its been hardly a week now Android on Samsung wave 1 S8500 is Rooted
yes you heard me, its ROOTED, that means more functionality from your Samsung wave phone.
thanks to xda Devs they have created a new zImage for your android
The touch calibration has been made, so the left part of your screen which was facing touch issues is resolved now.
Steps
1) Copy and replace this zImage in your phone memory with this one here >> http://data.hu/get/5295695/zImage (Use the “Lassú letöltés” button in mid page to download).
2) use unlocktroot tool to root your wave >> http://www.unlockroot.com
3) Download unlockroot tool from above link and install
4) Connect ur android on samsung wave to pc, make sure usb debugging is on
5) Click on root
6) it will ask to install a driver, click on install driver anyway , the second option (in win 7)
7) Wait for root to complete
3) Done
Enjoy
Click to expand...
Click to collapse
i think you should have given credits to me!
i was the one who posted this procedure on badahub.com
and i also happen to be the editor of that site
you have copied word to word from my post on how to root wave
you need to give credits
deeps_17 said:
i think you should have given credits to me!
i was the one who posted this procedure on badahub.com
and i also happen to be the editor of that site
you have copied word to word from my post on how to root wave
you need to give credits
Click to expand...
Click to collapse
i didn't get any credits otherwise didn't thing about credit.
this is only for ics users.ok
yasotharan13 said:
i didn't get any credits otherwise didn't thing about credit.
this is only for ics users.ok
Click to expand...
Click to collapse
wt do you mean by ics users
you are enjoying root coz of my tutorial
and u dun give a mention about my name also
you are disgusting man
seriously
learn some ethics and come
deeps_17 said:
wt do you mean by ics users
you are enjoying root coz of my tutorial
and u dun give a mention about my name also
you are disgusting man
seriously
learn some ethics and come
Click to expand...
Click to collapse
i searched web and give this information.this is not serious matter.
who have s8500 thats mean ics user
@yasotharan13
If you didn't write this tutorial you must give credits or at least write the source from where you got this.
@deeps_17
yasotharan13 didn't claimed that he had written this
http://badahub.com/2012/07/android-4-0-4-ics-on-samsung-wave-i-s8500-rooted.html
No idea, I can't see exact date...
@ deeps_17
Maybe we have few more important problems, as 1 Copy & Paste Tutorial...
Please forgive us. :angel:
Then concentrate on more important stuff...
Like writing new Tuts, more infos...
Internet is living from Copy and Paste. :good:
Otherwise we would read long long Credits...
Credits goes to my Mom, my Dad, my Grandma who has born my Mom and my other Grandma who has born my Dad...
.
.
.
.
.
I thank ""God"", who has made the earth, where we are all living... etc...
Also I will thank Edison, the Inventor of Glühbirne... that I have light in my Room...
Now serious... few of our German Forum members think you are the man who ported Android to Wave...
P.s.: Sorry that I have written God... it is short word.
I have no religion.
Please, better back to Topic.
Android Port is NOT finished.
We need our energy...
Best Regards
adfree said:
http://badahub.com/2012/07/android-4-0-4-ics-on-samsung-wave-i-s8500-rooted.html
No idea, I can't see exact date...
@ deeps_17
Maybe we have few more important problems, as 1 Copy & Paste Tutorial...
Please forgive us. :angel:
Then concentrate on more important stuff...
Like writing new Tuts, more infos...
Internet is living from Copy and Paste. :good:
Otherwise we would read long long Credits...
Credits goes to my Mom, my Dad, my Grandma who has born my Mom and my other Grandma who has born my Dad...
.
.
.
.
.
I thank ""God"", who has made the earth, where we are all living... etc...
Also I will thank Edison, the Inventor of Glühbirne... that I have light in my Room...
Now serious... few of our German Forum members think you are the man who ported Android to Wave...
P.s.: Sorry that I have written God... it is short word.
I have no religion.
Please, better back to Topic.
Android Port is NOT finished.
We need our energy...
Best Regards
Click to expand...
Click to collapse
LOL:laugh::good:
Not working
yakub234go said:
LOL:laugh::good:
Click to expand...
Click to collapse
Its not working, unlockroot does not detect my phone eventhough I have run USB debugging.
Can help?
Is this only work for Bada 2?
Can I have a full tutorial on this? as I didnt find any Zimage file to replace. Thanks,
Sorry for writing here but I am not authorized to write in the same post. I hope I could be able in near future
I need to know how to root the new MIUI 2.8.3 ?
Thanks for every one worked on it
Regards
sherifaly said:
Sorry for writing here but I am not authorized to write in the same post. I hope I could be able in near future
I need to know how to root the new MIUI 2.8.3 ?
Thanks for every one worked on it
Regards
Click to expand...
Click to collapse
is there any application that called superuser or supersu ?
On the home screen you will see tools folder, open it then find permission (the icon like paper script) open that then choose manage root permission
Sent from my PC36100 using Tapatalk 2
nom051205 said:
On the home screen you will see tools folder, open it then find permission (the icon like paper script) open that then choose manage root permission
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I did that but it doesnt work , Also I flashed the superuser in this thread http://forum.xda-developers.com/showthread.php?t=997581
It always says superuser deny the apps.
Also regaridng battery I see you mention that it stays for only 5 hours , it stays with me for 20 hours with regular conditions & I am using battery deffender.
If I have any other comments I will mention it but we must root it
Again thanks for the good job
This rom is already pre-rooted no need to flash any thing as we generally do in stock roms.......
I think you have flashed some superuser.....so i think you need to re- flash the rom-(***do make a clean rom flash asper rom developer***)
Now after rom instal just instal root explorer......
Now as soon as u open root explorer a menu popup will apear it is just like superuser pop up ...(only the diffrence is this pop up will apear for 20sec...and contains so many warning message all u need to click next every time) (****refer attached images ****)
After this step you can see root folder .....
For every application which asks for root permission. U need to do this .....
Adi.
sherifaly said:
I did that but it doesnt work , Also I flashed the superuser in this thread http://forum.xda-developers.com/showthread.php?t=997581
It always says superuser deny the apps.
Also regaridng battery I see you mention that it stays for only 5 hours , it stays with me for 20 hours with regular conditions & I am using battery deffender.
If I have any other comments I will mention it but we must root it
Again thanks for the good job
Click to expand...
Click to collapse
Now that weird, I have no issue with su on mine, maybe you should reflash the rom?
Sent from my PC36100 using Tapatalk 2
nom051205 said:
Now that weird, I have no issue with su on mine, maybe you should reflash the rom?
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
Finally Thanks to jyeshta001 for his replay.
Thanks to nom051205 for the rom and we hope to see further development
I have some time to support but I dont have any experince in roms editing so if you can advice with some links I could support.
Best regards
sherifaly said:
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
(QUOTE=sherifaly;32178538)
Use rom tool box pro / a strong startup manager so that u can control unwanted application running form the begining for startup.....
For head set one use a wedget called "toggle to head set" from playstore.
For lagness use any CPU tool like set CPU and set frequency as "1xx to 1xxx " and the governor to "on demand" (but drains battery)
For button lights "root dim " aPK. Will help u to some extend ......
For random colours on screen we will have to w8 "Nom bro" will bring a patch ....soon .....
Adi!™
Click to expand...
Click to collapse
jyeshta001 said:
sherifaly said:
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
(QUOTE=sherifaly;32178538)
Use rom tool box pro / a strong startup manager so that u can control unwanted application running form the begining for startup.....
For head set one use a wedget called "toggle to head set" from playstore.
For lagness use any CPU tool like set CPU and set frequency as "1xx to 1xxx " and the governor to "on demand" (but drains battery)
For button lights "root dim " aPK. Will help u to some extend ......
For random colours on screen we will have to w8 "Nom bro" will bring a patch ....soon .....
Adi!™
Click to expand...
Click to collapse
Thanks my friend I will try all
But now the market is mentioning the device is not compatible with this app , what shall I do ??? knowing that I changed the resoluation to 180 DPI.
Thanks in advance
Click to expand...
Click to collapse
sherifaly said:
jyeshta001 said:
Thanks my friend I will try all
But now the market is mentioning the device is not compatible with this app , what shall I do ??? knowing that I changed the resoluation to 180 DPI.
Thanks in advance
Click to expand...
Click to collapse
Open the build.prop(this file is in system folder) in text editor of root explorer and add following lines at the end of build prop page ...
ro.product.model=GT-N7000
ro.product.manufacturer=samsung
Then save &exit ....after that you should do a reboot.
Now check ur market compatability .... if this is not working then change the model number and manufacture name to some other one..... on above lines....
Give us the feedback if it is not working.....ok
Adi™
Click to expand...
Click to collapse
jyeshta001 said:
sherifaly said:
Open the build.prop(this file is in system folder) in text editor of root explorer and add following lines at the end of build prop page ...
ro.product.model=GT-N7000
ro.product.manufacturer=samsung
Then save &exit ....after that you should do a reboot.
Now check ur market compatability .... if this is not working then change the model number and manufacture name to some other one..... on above lines....
Give us the feedback if it is not working.....ok
Adi™
Click to expand...
Click to collapse
Thanks again my friend it works fine.
I will check the mentioned progarms & give my feed back.
Best regards
Click to expand...
Click to collapse
sherifaly said:
jyeshta001 said:
Thanks again my friend it works fine.
I will check the mentioned progarms & give my feed back.
Best regards
Click to expand...
Click to collapse
Regarding market also LCD density modder pro willl solve the problem
New problem appears , Viber & Tango are not working after searching I found some body mentioned a problems with mic ( in custom roms)
Any ideaes about that
Click to expand...
Click to collapse
sherifaly said:
sherifaly said:
Regarding market also LCD density modder pro willl solve the problem
New problem appears , Viber & Tango are not working after searching I found some body mentioned a problems with mic ( in custom roms)
Any ideaes about that
Click to expand...
Click to collapse
yes viber, tango, skype not working only on those custom roms which are based on 2.3.7 and also all ics roms
Click to expand...
Click to collapse
citric_acid said:
sherifaly said:
yes viber, tango, skype not working only on those custom roms which are based on 2.3.7 and also all ics roms
Click to expand...
Click to collapse
who says skype not working? you better search carefully... there are workaround for 2.3.7 already...
Click to expand...
Click to collapse
deysmacro said:
citric_acid said:
who says skype not working? you better search carefully... there are workaround for 2.3.7 already...
Click to expand...
Click to collapse
okay, so did you try that trick, i think after trying you shouldn't have said that, even though what about those who does'nt want to credit there accounts, also ive mentioned about 4.0.4 roms, i know that they won't work on them since they're still on development stage so its better to stay on 2.3.3 for frequent voiper's
Click to expand...
Click to collapse
citric_acid said:
deysmacro said:
okay, so did you try that trick, i think after trying you shouldn't have said that, even though what about those who does'nt want to credit there accounts, also ive mentioned about 4.0.4 roms, i know that they won't work on them since they're still on development stage so its better to stay on 2.3.3 for frequent voiper's
Click to expand...
Click to collapse
Yes also viber is orking in 2.3.7 I tries it in Longhorn & others
Click to expand...
Click to collapse
I'm a newbie in need of some help.
What I'm after is a way to permanently disable or remove wifi access from the s3 in a way that will stick even after a factory reset.
I'd like to stay as close to stock as possible.
I have found "completely-remove-wifi-from-android-rom-including-settings-layout" on stackoverflow which seems ideal but I suppose will require atleast compiling the kernel which will require some expert (or at least detailed) advice.
So far I've managed a quick and dirty solution intentionally recreating an issue people who edited wpa_supplicant.conf ran into by changing some file permissions setting in init.rc, but it seems less than ideal.
Your input is very welcome.
just open the phone and get the wifi antenna out and that does it
Blackwolf10 said:
just open the phone and get the wifi antenna out and that does it
Click to expand...
Click to collapse
It is a possibility but one i would like to avoid if at all possible.
I would try deleting the wifi stuff out of the rom first .
jje
JJEgan said:
I would try deleting the wifi stuff out of the rom first .
jje
Click to expand...
Click to collapse
More details might be needed, which wifi stuff do you mean ?
I just about managed to unpack and repack boot.img I suppose its possible to remove all the wifi related stuff from the init scripts, not sure if it'll get a different result than what I've done so far.
johnny.p said:
More details might be needed, which wifi stuff do you mean ?
Whatever s in the rom sorry i dont have time to look for you .
Click to expand...
Click to collapse
JJEgan said:
johnny.p said:
More details might be needed, which wifi stuff do you mean ?
Whatever s in the rom sorry i dont have time to look for you .
Click to expand...
Click to collapse
Thanks anyhow, perhaps you'll find the time later or someone else will have a better idea.
No hurry, I'll only be able to check back in a couple of days in any case.
Click to expand...
Click to collapse
JJEgan said:
johnny.p said:
More details might be needed, which wifi stuff do you mean ?
Whatever s in the rom sorry i dont have time to look for you .
Click to expand...
Click to collapse
Well after a false start using a guide on how to preroot an sII which resulted in a brick (for some reason the s3 couldn't mount the repakced system.img) I've managed to use dsixda's guide and android kitchen.
So display wise - removing the wifi files from /etc/permissions seems to remove wifi from the settings layout. but its still available from the kies via wifi and probably other places.
Functionality wise removing the wifi files from /etc/wifi does stop it from functioning.
So its a success, still I would appreciate any tips on making it less crude and any pointers on making a regular rom rather than an update zip.
Click to expand...
Click to collapse
johnny.p said:
So its a success, still I would appreciate any tips on making it less crude and any pointers on making a regular rom rather than an update zip.
Click to expand...
Click to collapse
Found a good guide in Galaxy S III General called '[HOW TO] Root it Yourself (w/o increasing counter)' only difference from the guide i used seems to be size you give to mkuserimg.sh but there you go so thats one issue handled.
I don't know where to find an FSC script to flash .111 since flashtool keeps telling me that "Flash script is mandatory. Closing session". I don't know if I can't just take one from F33XX or if I'll brick my device. Flashtool doesnt provide a default.fsc file, itr only provides "F32XX.properties". And if doesn't exist, how can I make it by myself ?
same problem
szucsi1996 said:
same problem
Click to expand...
Click to collapse
It seems like you have to use an older version of flash tool where it won't ask for fsc.
Yooooomi said:
It seems like you have to use an older version of flash tool where it won't ask for fsc.
Click to expand...
Click to collapse
lol, im on 0.9.23.2
szucsi1996 said:
lol, im on 0.9.23.2
Click to expand...
Click to collapse
Try to use https://forum.xda-developers.com/xperia-sp/help/help-fsc-script-t3193845
Yooooomi said:
Try to use https://forum.xda-developers.com/xperia-sp/help/help-fsc-script-t3193845
Click to expand...
Click to collapse
does it work for you?
szucsi1996 said:
does it work for you?
Click to expand...
Click to collapse
I don't know I'm going to try it in 20 minutes, I'm not home haha
Yooooomi said:
I don't know I'm going to try it in 20 minutes, I'm not home haha
Click to expand...
Click to collapse
ok wait for you because my phone is in a gsm service.....
szucsi1996 said:
ok wait for you because my phone is in a gsm service.....
Click to expand...
Click to collapse
More than one hour that I'm stuck with a f*****g "Processing of boot.sin finished with errors" I dont know what to do :/
It doesn't ask for an FSC anymore but I can't get it to work
Yooooomi said:
More than one hour that I'm stuck with a f*****g "Processing of boot.sin finished with errors" I dont know what to do :/
It doesn't ask for an FSC anymore but I can't get it to work
Click to expand...
Click to collapse
szucsi1996 said:
Click to expand...
Click to collapse
I just downgraded my phone to .111 using the latest Flashtool. I went to Users/.flashtool and copied the default fsc of the F31XX to the F32XX folder, renaming it to the build version, something like "F3212_36.0.B.1.111.fsc". Flashtool then asked me if I wanted to use it during the flash, I answered yes. Now my phone is fully working, rooted and xposed on .111, till now everything is working fine, even the front camera focus
Yooooomi said:
I just downgraded my phone to .111 using the latest Flashtool. I went to Users/.flashtool and copied the default fsc of the F31XX to the F32XX folder, renaming it to the build version, something like "F3212_36.0.B.1.111.fsc". Flashtool then asked me if I wanted to use it during the flash, I answered yes. Now my phone is fully working, rooted and xposed on .111, till now everything is working fine, even the front camera focus
Click to expand...
Click to collapse
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
szucsi1996 said:
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
Click to expand...
Click to collapse
Let's make a new thread where i post screenshots...
Yooooomi said:
Let's make a new thread where i post screenshots...
Click to expand...
Click to collapse
You can post this thread or not?
szucsi1996 said:
You can post this thread or not?
Click to expand...
Click to collapse
https://forum.xda-developers.com/xa...-flashtool-t3551319/post70893399#post70893399
Yooooomi said:
https://forum.xda-developers.com/xa...-flashtool-t3551319/post70893399#post70893399
Click to expand...
Click to collapse
Are we the same issue? Make Xperia laugh when you switch to front camera.. And front camera saying some application using it?
nikkali25 said:
Are we the same issue? Make Xperia laugh when you switch to front camera.. And front camera saying some application using it?
Click to expand...
Click to collapse
Everything is working fine for me
szucsi1996 said:
Can you make me tutorial video? Vedy important for me! Please
And where i can find default.fsc file?
Click to expand...
Click to collapse
Hope you have finally found the way to it, otherwise I'd like to tell how I did this.
First, in Windows, open file explorer and click on c:/ go to users and double click on your user name to open.
Once there go to .flashtools and navigate till you find the folder devices, open it and go to the foder corresponding to the name of your device, in this case I assume it musst be F32XX, open it and see if the is a file named F3213_(version of the room).fsc without the brackets.
If there is not you can goback to the devices folder and open the folder corresponding to F3211 and find a file named F3211_(version of a rom).fsc, if so just copy it into the folder corresponding to your device making sure your rename it with F3213_(version of the rom).fsc.
Finally just flash your rom with flashtools, at the beginning of the process it will ask you if you waant to use the fsc file found, just click on yes and the process will begin and end successfully.
I worked for me.
Hope you find it useful.
amhed91 said:
Hope you have finally found the way to it, otherwise I'd like to tell how I did this.
First, in Windows, open file explorer and click on c:/ go to users and double click on your user name to open.
Once there go to .flashtools and navigate till you find the folder devices, open it and go to the foder corresponding to the name of your device, in this case I assume it musst be F32XX, open it and see if the is a file named F3213_(version of the room).fsc without the brackets.
If there is not you can goback to the devices folder and open the folder corresponding to F3211 and find a file named F3211_(version of a rom).fsc, if so just copy it into the folder corresponding to your device making sure your rename it with F3213_(version of the rom).fsc.
Finally just flash your rom with flashtools, at the beginning of the process it will ask you if you waant to use the fsc file found, just click on yes and the process will begin and end successfully.
I worked for me.
Hope you find it useful.
Click to expand...
Click to collapse
So, Wit this your device won't brick?
merolrockstar said:
So, Wit this your device won't brick?
Click to expand...
Click to collapse
As I said I tested it and it's working on F3212, now look on the thread for the people who have another device