This is kind of related to development, and still really important since those flashing Leak ROMs might not read the General section and not know if I posted this there. That is why I posted this here.
If you flashed any PG86IMG firmware zip for the Virgin Mobile leaks, you might not be able to go back.
EDIT: CHADS DOWNGRADE THREAD: http://forum.xda-developers.com/showthread.php?t=1641461
NOTE: This is not specific to freeza's zip. Any firmware zip for the leaks is the same.
Why?
The leak firmware has a file, dzdata_4g.hdr, which no other official firmware has.
The only similar thing other leaks have is dzdata.img which has confirmed not working since people flashing 2.17 ruu (which has this) are still showing the Virgin Mobile banner and having problems.
Downgrading will leave you with the Virgin Mobile dzdata_4g.hdr.
TL;DR/easier to digest
Leak has dzdata_4g.hdr
No official firmware RUU does
Downgrading leaves you stuck with dzdata_4g
What is bad about keeping the Firmware
If you have flashed the zip or have tried downgrading from it, you might be one of the few that have problems with:
-No 3G, just 1X
-No VPN
-More bugs
And everyone will be stuck with the "Virgin Mobile" banner.
Also you're flashing radios and firmware from an unnoficial firmware for a different device. This can cause a lot of issues.
If you aren't having problems and you flashed it, good for you.. Some do but most don't..
EDIT: We're marked as Virgin Mobile so we'll be at the bottom of the tower priority.. among other things..
Can I still flash the firmware zip minus dzdata_4g.hdr?
Try it and report back. It might brick or phone or cause random reboots with the ROM.
Is there a fix if I already flashed it?
See here: http://forum.xda-developers.com/showthread.php?t=1641461
Summary:
The point of this warning is that if you flash the leaked firmware, there is a chance of you having problems. This chance is pretty high since I'd say like 1/10 of people have no 3G and signal quality for a lot of people got poorer.
If you get these problems, there's no going back. There's no way of fixing them.
Whether it's worth taking the risk or not is up to you.
Edit: This kind of explains the situation were in right now:
HTCFlyerX said:
BTW....if anyone can confirm that they can roam on data after flashing the VM firmware please let us know! I believe data roaming may not work any longer.
And to explain why I don't believe the Sprint ICS leak....very simply....all the rcdata.imgs from our ruus contain the same exact thing....the partition (RCData) is the Radio-Cust.(om?)er?) Data partition and holds pri information and roaming data!
So quite simply....we flashed a file that was built for a different carrier and are now marked as that carrier in different areas of the network.....this WILL conflict with other things as more of us use our devices at different levels!
ADDED AFTER..... Chad has just confirmed with Qualcomm that we have messed up our devices PRI! There is no way to revert from the VIRGIN MOBILE PRI!
The ICS leak may be our fix as it could contain a updated PRI that would be accepted by our devices partition!
Click to expand...
Click to collapse
Sent from my Evo 3D using Tapatalk 2.0
Thanks man
I havent had any problems with upgrading and am happy with the ics leak so im good to go I've had same signal, same data speeds and everything....
Nice post btw
That's a good thing I just flash away with s-on then.
sent from the future!
I happen to be one of those lucky chaps who flashed it and are suffering from extremely poor signal...
God damn...why did I flash this ish..
ssojyeti2 said:
I happen to be one of those lucky chaps who flashed it and are suffering from extremely poor signal...
Click to expand...
Click to collapse
I flashed it and went a few places and had what I think is extremely poor signal, but every time I checked my wifes phone's signal (stock Epic 4G) it is the same. Maybe just coincidence?
Good thing I just flashed the roms and not the fw *PheeeW*
Interesting. Curious to.see more feedback I myself did not update firmware. Signal seems normal.
Sent from my PG86100 using Tapatalk 2
im not entirely sure how true this is cause I just nandroid back to WarmTwoPointThree and using my 4g hotspot from my Evo 3d
I upgraded to the firmware and then decided to go back to the 2.17 firmware and I don't have any problems?
Sent from my PG86100 using Tapatalk 2
Jamesredmond82 said:
im not entirely sure how true this is cause I just nandroid back to WarmTwoPointThree and using my 4g hotspot from my Evo 3d
Click to expand...
Click to collapse
4G still works with the firmware, I never said anything was wrong with 4G. So does hotspot.
Go to settings, about phone, network and tell me what it says for your network operator.
Also you did flash the firmware right? or did you flash the roms without firmware?
Gumby63 said:
I upgraded to the firmware and then decided to go back to the 2.17 firmware and I don't have any problems?
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Only some are actually having problems, but the point is, if you flash Freeza's firmware there is a chance of you having problems. If you have problems, theres no way of fixing them.
Also the chance is pretty high as many users have been reporting of no 3G, VPN, etc.
With the virgin mobile banner am I no longer in the Sprint database or is it just cosmetic/visual that can be edited with eri.xml ???
Sent from my PG86100 using XDA
I appreciate the warning, but maybe it was premature? I flashed the fw with no issues, and I've been on 2 ics builds and one 2.17 without problem.
Sent from my PG86100 using Tapatalk 2
Hope a solution comes out for this, so glad I didn't flash the firmware lol.
sent from my 3VO
I want this **** off of my phone!!! Can I use a old RUU?
Sent from my PG86100 using XDA Premium App
yousefak said:
4G still works with the firmware, I never said anything was wrong with 4G. So does hotspot.
Go to settings, about phone, network and tell me what it says for your network operator.
Also you did flash the firmware right? or did you flash the roms without firmware?
Click to expand...
Click to collapse
I Flashed the firmware right into bootloader and I dont see where you are seeing your network operator
I flashed Freeza's ics firmware but my banner never changed to virgin mobile even though it seemed to work since voicemail didn't work. I was able to run 1.13 RUU and it seemed like everything was back to normal.
I also haven't had an issues with any rom.
I flashed while on Newts one S. And was able to restore to Nocturnal Adrenaline just fine.
Jamesredmond82 said:
im not entirely sure how true this is cause I just nandroid back to WarmTwoPointThree and using my 4g hotspot from my Evo 3d
Click to expand...
Click to collapse
You can Nandroid back to a previous "rom" but, the "firmware" (if you flashed) will remain the same.
Related
I'm having terrible 4g issues. i got a replacement thunderbolt a little while back and flashed eternity which im not too happy with on there. but i never flashed a new rom because i was told that the new radios on the most current hardware would supprt it. sure enough it did but the 4g doesnt work like its supposed to. just goes in and out and stuff
since i'm not too good with radios i need to know which one would be the best to flash. and why if someone doesnt mind explaining it to me. thanks!
Willis_G said:
I'm having terrible 4g issues. i got a replacement thunderbolt a little while back and flashed eternity which im not too happy with on there. but i never flashed a new rom because i was told that the new radios on the most current hardware would supprt it. sure enough it did but the 4g doesnt work like its supposed to. just goes in and out and stuff
since i'm not too good with radios i need to know which one would be the best to flash. and why if someone doesnt mind explaining it to me. thanks!
Click to expand...
Click to collapse
Are you currently running the most updated 605.19 stock radios?
You ARE if you go to settings, about phone, software information, more, and the baseband version reads 1.49.00.0406w_1, 0.01.79.0331w_1
If these are not the numbers you see, flash these radios from here:
http://forum.xda-developers.com/showthread.php?p=24992678
If these are the numbers you see, then it should be working properly. If not, you may have installed an older version of Eternity. Check to make sure you flashed the most updated one.
Or the 4G in your area may be simply going in and out. Try flashing another ROM to verify this.
Sent from my ADR6400L using xda premium
RBarnett09 said:
Are you currently running the most updated 605.19 stock radios?
You ARE if you go to settings, about phone, software information, more, and the baseband version reads 1.49.00.0406w_1, 0.01.79.0331w_1
If these are not the numbers you see, flash these radios from here:
http://forum.xda-developers.com/showthread.php?p=24992678
If these are the numbers you see, then it should be working properly. If not, you may have installed an older version of Eternity. Check to make sure you flashed the most updated one.
Or the 4G in your area may be simply going in and out. Try flashing another ROM to verify this.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Thank you bro! i'm going to start messing with this and checking everything. and i'll probably reflash too. i've been wanting to for a while but i think im going back to bamf. i ran bamf for over a year and really liked it
Willis_G said:
Thank you bro! i'm going to start messing with this and checking everything. and i'll probably reflash too. i've been wanting to for a while but i think im going back to bamf. i ran bamf for over a year and really liked it
Click to expand...
Click to collapse
I run Gingeritis3D and still love it. I tried running BAMF Forever 1.10 but it was too laggy, even after changing kernels. Just keep flashing and find out what you like.
Sent from my ADR6400L using xda premium
RBarnett09 said:
I run Gingeritis3D and still love it. I tried running BAMF Forever 1.10 but it was too laggy, even after changing kernels. Just keep flashing and find out what you like.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
I just did the LiquidSmooth-ICS-v1.5-MR3
and have no data now. Im trying to determine what the best radios are for this. does anyone have ideas?
The .19 radios works best for me. Have you tried toggling data on and off or putting it into airplane mode for a minute and taking it back out.
Sent from my Thunderbolt using Tapatalk 2
disconnecktie said:
The .19 radios works best for me. Have you tried toggling data on and off or putting it into airplane mode for a minute and taking it back out.
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
.19? i guess i dont understand
605.19 is the name of the radios. Not the entire name but the last 5 digits of the radio name are usually what we go by.
Sent from my Thunderbolt using Tapatalk 2
disconnecktie said:
605.19 is the name of the radios. Not the entire name but the last 5 digits of the radio name are usually what we go by.
Sent from my Thunderbolt using Tapatalk 2
Click to expand...
Click to collapse
cool man well i dug threw the thread and found the radios that other people flashed. and ran those threw the phone. still have sketchy 4G but if i keep it on cdma only and run permanent 3g its smooth, just not super fast like i wish.
does anyone know a specific LTE only radio i can flash in that they have had success with running the ICS Roms?
Willis_G said:
cool man well i dug threw the thread and found the radios that other people flashed. and ran those threw the phone. still have sketchy 4G but if i keep it on cdma only and run permanent 3g its smooth, just not super fast like i wish.
does anyone know a specific LTE only radio i can flash in that they have had success with running the ICS Roms?
Click to expand...
Click to collapse
I'm pretty sure the LTE radios they used were from the 2.11.605.19 OTA. They may have flashed a different CDMA radio, but Idk. The leaked LTE radio causes most phones to reboot a lot.
Here's a link to the combo radios though. I suppose it never hurts to try them out... the outcome varies by phone.
http://forum.xda-developers.com/showthread.php?p=30974567
But it is still recommended to use the 2.11.605.19 radios... which I posted a link for them above.
Sent from my ADR6400L using xda premium
RBarnett09 said:
I'm pretty sure the LTE radios they used were from the 2.11.605.19 OTA. They may have flashed a different CDMA radio, but Idk. The leaked LTE radio causes most phones to reboot a lot.
Here's a link to the combo radios though. I suppose it never hurts to try them out... the outcome varies by phone.
http://forum.xda-developers.com/showthread.php?p=30974567
But it is still recommended to use the 2.11.605.19 radios... which I posted a link for them above.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
Cool bro, thanks alot. its funny you mentioned the autoreboot, the phone did it once to me already.
I will experiment with LTE radios and keep flashing until i find something that works good.
Willis_G said:
Cool bro, thanks alot. its funny you mentioned the autoreboot, the phone did it once to me already.
I will experiment with LTE radios and keep flashing until i find something that works good.
Click to expand...
Click to collapse
I've even had luck with the old 2.11.605.9 radios.
Try them if you'd like.
http://forum.xda-developers.com/showthread.php?t=1396408
Just be careful flashing different radios. If you flash a bad radio, it can brick you.
Also, I was always told to never flash the same radio that is already installed. So if you flash the .9 radios and they are currently installed, don't flash them again until you flashed a different radio.
Sent from my ADR6400L using xda premium
I am on latest baseband version : 1.12.11.0809 and Hboot 1.19. I am not S-OFF but would be doing it very soon.
I want to downgrade to earlier baseband/radio version, is it possible?
honest1212 said:
I am on latest baseband version : 1.12.11.0809 and Hboot 1.19. I am not S-OFF but would be doing it very soon.
I want to downgrade to earlier baseband/radio version, is it possible?
Click to expand...
Click to collapse
Not sure if it's possible but may not be a good idea most of the current rom are based off the latest firmware 2.13
No, you will hard brick
Sent from my EVO using xda premium
mrlakadaddy said:
No, you will hard brick
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
honest1212 said:
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
Click to expand...
Click to collapse
No hard brick, meaning your phone will be a paperweight don't do it!
Sent from my EVO using Tapatalk 2
thicklizard said:
No hard brick, meaning your phone will be a paperweight don't do it!
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
No chances at all?
I tried it. Unrecoverable brick
Sent from my EVO using xda premium
corcgaigh said:
I tried it. Unrecoverable brick
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Ok, so can I run older version RUU if I do S-OFF? Will that downgrade the radio?
honest1212 said:
Ok, so can I run older version RUU if I do S-OFF? Will that downgrade the radio?
Click to expand...
Click to collapse
I'm not sure. All the info you need you can probably find in captain throwbacks firmware thread
Sent from my EVO using xda premium
i did it and got lucky.. i swear it was an act of god that my phone still works.. i tryed to downgrade and when running the ruu in bootloader my battery died!!! yep sh*t was crazy.. i thought it was gone but i charged it for a bit got it to come on.. it downloader half the ruu and it was stuck it kept going from bootloader screen to stock recovery then shut off.. over and over.. then it finished running the ruu and it rebooted for the 20 th time and it was good.. i was back to stock and phone was back.. it was crazy.. im so lucky that it didnt brick
evo401 said:
i did it and got lucky.. i swear it was an act of god that my phone still works.. i tryed to downgrade and when running the ruu in bootloader my battery died!!! yep sh*t was crazy.. i thought it was gone but i charged it for a bit got it to come on.. it downloader half the ruu and it was stuck it kept going from bootloader screen to stock recovery then shut off.. over and over.. then it finished running the ruu and it rebooted for the 20 th time and it was good.. i was back to stock and phone was back.. it was crazy.. im so lucky that it didnt brick
Click to expand...
Click to collapse
That sounds very risky. I would rather search for downgrading rather than search later for unbricking....
Guess I was one of the lucky ones. I upgraded my radios, then I got horrible 3g and cell service. I just flashed the downgraded radios and was back in business.
So I guess the moral is YMMV.
Sent from my EVO using xda premium
corcgaigh said:
I'm not sure. All the info you need you can probably find in captain throwbacks firmware thread
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Can you put the link?
honest1212 said:
Can you put the link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1704612
Sent using my HTC EVO LTE and a magic wand
honest1212 said:
Actually, I am not getting EVDO/3G network if I use the latest radio(1.12.11.0809) . I have to downgrade to get the EVDO network.
The same thing happened with Sprint GNEX where I used to get EVDO network only on FC12 radio and no other ones.
This is the reason I want to downgrade. I know possibilities of bricking is much higher but there should be some way.
Click to expand...
Click to collapse
You should look at captain throwbacks post. I tried to downgrade radios and completely hard brick the phone. Don't risk it man!
Are you guys sure about this downgrading and bricking business? I know on the EVO 4G, the original one, the first exploit to change its ESN was to use an older radio... And I must have downgraded and upgraded radios on that like 5 times...
My memory may be hazy, but I am sure I did that. The same goes for Droid Incredible. Unless EVO LTE is completely different?
I am thinking of upgrading my radio too because I am using the EVO LTE on Verizon, and the signal strength is about 10db worse than a regular VZW 3G, right next to it. But if the update makes things worse, I was wondering if I can just downgrade to the stock radio...
So again, are you guys sure about this?
ProFragger said:
Are you guys sure about this downgrading and bricking business? I know on the EVO 4G, the original one, the first exploit to change its ESN was to use an older radio... And I must have downgraded and upgraded radios on that like 5 times...
My memory may be hazy, but I am sure I did that. The same goes for Droid Incredible. Unless EVO LTE is completely different?
I am thinking of upgrading my radio too because I am using the EVO LTE on Verizon, and the signal strength is about 10db worse than a regular VZW 3G, right next to it. But if the update makes things worse, I was wondering if I can just downgrade to the stock radio...
So again, are you guys sure about this?
Click to expand...
Click to collapse
First off, the Evo LTE is different then previous phones. It uses the newer Qualcomm Secure Boot 3 which does A LOT more version and signature checking. It also uses eMMC flash memory instead of NAND. (Which gives the added ability of setting individual blocks of memory as read-only via low level firmware, before the OS even boots up).
Now, that said, some ppl have bricked their Evo LTE's by DOWNGRADING firmware. The biggest problem is that it's unclear what the exact combinations are which result in a brick. Therefore anyone attempting to downgrade should be very careful and read through both firmware threads before trying it themselves.
As far as using these radio's with Verizon service, your kinda on your own. The Evo LTE is the Sprint version of the HTC One X/XL and therefore the radios are (probably) tuned for best performance on Sprint's network.
And before someone asks, NO you can not use One X/XL radios on the Evo LTE. While in theory they should work, in reality you are almost 100% guaranteed to brick.
Unfortunately the newest generation of phones is much more secure, more complicated and extremely lacking in hardware documentation, compared to older ones.
-SLS-
That's a very fair, detailed post Soul Shadow... Appreciate the knowledge... Guess I will not be touching the radios then...
Unless you guys can confirm or debunk that the new radios have improved your signal strength by any chance?
ProFragger said:
That's a very fair, detailed post Soul Shadow... Appreciate the knowledge... Guess I will not be touching the radios then...
Unless you guys can confirm or debunk that the new radios have improved your signal strength by any chance?
Click to expand...
Click to collapse
OK, after reading a lot and with help of all of you guys, I finally downgraded my radio from 1.12.11.0809 then I went to 1.05.11.0606 and then to 1.02.12.0427.
Though it didnt helped me getting 3G signals but downgrading is possible and this may help anyone out there to do the same.
I used the bootloader flashables and just flashed it. I am on 1.19 boot with S-OFF.
Just tried downgrading from 1.12.11.0809 (latest OTA) to 1.05.11.0606 via bootloader and got a brick. I'm on 1.19 S-OFF hboot.
Any ideas on unbricking besides JTAG?
Here's the situation, my phone is running great on SuperLTE or any other Sense rom. Excellent battery, no signal problems, no freezing, just a reliable piece of technology. The problem comes in when I try to run anything other than a stock style rom.
When I flash cm10, everything works good, except for sporadic mms sending and receiving. If I flash any of the miui builds I have a messaging LOS after a reboot that my phone can not recover from and a full wipe is required.
I have tried reflashing radios, prl and profile updates. Tried doing hands free activations. About the only thing I have not tried is running the RUU. Would this make any difference? I'm s-off with hboot 1.12, 1.12.11.0809 radio. With the JB update dropping any day should I just wait for the new firmware and try that first.
Any tips or suggestions are greatly appreciated. Thanks
Sent from my EVO using xda premium
I would read through the OP for CM10 and see if anybody else has had the same issues. If Sense-based ROM's work fine for you, I'd be inclined to say it's CM10, not your phone. Also, if and when JB drops, I'd wait for a rooted version from one of the devs, as opposed to losing root and potentially other issues.
Sent using my HTC EVO LTE and a magic wand
Updating to hboot 1.19 could be worth a try. Its not like u have something to lose now that dirtyracoon is around..its very easy to run
Sent from my EVO using Xparent Red Tapatalk 2
This just drives me crazy. I know that every one of our phones are different, but many people don't have these problems. Makes a guy wonder what is different or messed up with mine.
Sent from my EVO using xda premium
So I am a flashaholic, I admit it. And proud lol
However, I have noticed that I am no longer getting 4g/LTE connectivity. I keep getting network errors on pretty much every rom I try I have decent service in my area and my wife's Galaxy s3 is getting great service.
To get some service i have been switching to CDMA only is there something else I could do?
Tks
MB
You could try update PRL & Profile.
Or RUU back and you still experience issues then go to Sprint to warranty it out.. Hope you get it fixed
Sent from my EVO using Tapatalk 2
scoot0073 said:
You could try update PRL & Profile.
Or RUU back and you still experience issues then go to Sprint to warranty it out.. Hope you get it fixed
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I had the same problem until I updated radios that matched the ROM base I was using... I could nandroid back to earlier roms and have 4g, but new roms wouldn't connect reliably to 4g until I updated the radio to match. I'm S-On, so I just did the recovery flashable radio.
Thanks
Thanks folks so I am running the Super LTE Milestone 4.1 with Soff. My current Radio (Baseband is 1.12.11.0809 ) does anyone have any idea what radio I should be running with SuperLTE Milestone ?
thatenglishguy said:
Thanks folks so I am running the Super LTE Milestone 4.1 with Soff. My current Radio (Baseband is 1.12.11.0809 ) does anyone have any idea what radio I should be running with SuperLTE Milestone ?
Click to expand...
Click to collapse
Try doing a full update from this post --------> http://forum.xda-developers.com/showthread.php?t=1704612&highlight=radios+jewel
Take every PRECAUTION when flashing radios PRI etc...., they are they easiest way to brick your phone!
It happened to me. After flashing mean 6.4 I lost LTE. The only way I could connect is by switching to CDMA only. I reflashed different roms, unrooted, updated the software, re rooted, soff again, fixed permissions, profile, prl, called sprint and did numerous resets.
In other words, I think its toast.
I'm headed to the sprint store in the morning.
Sent from my EVO using Tapatalk 2
I have an Note i717M from Bell Canada that I have unlocked and using t-mobile radios to work with Wind.
For the last two weeks I had nothing but great reception and no black outs. I recently installed Black Star since I tried that ROM I have had almost no connection. I re-flashed ICS Blaze radio which I was using on Stock and CM10 with no issues.
Now no matter what ROM I flash I can't get connected for more then two minutes.
Not sure if anyone can think of anything that might cause this.
I am convinced it's not the radio because it works with my rogers account just fine when I flash the stock radio back to the phone.
Also I can connect to Wind Away on the stock radio no problem and stay connected with full bars.
Could it be the kernel?
Got it working I had to do the full flash in odin each of the partitions. Something must have been corrupted pretty bad. As soon as i flashed all the stock partitions and booted up and got the ics ota. Flashed icsblaze and back to full connectivity.
Sent from my SGH-I717M using xda app-developers app
It sounds like you just needed to add the right APN settings to the rom for it to work. If you decide to try blackstar again makesure to copy down your APN settings you are currently using.
I got the same problem he does and I don't know how to repartition my phone can someone help me
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sk84all20 said:
I got the same problem he does and I don't know how to repartition my phone can someone help me
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I guess he used this rom to back to stock.
http://forum.xda-developers.com/showthread.php?t=1657279
By the way, It's 2.3 stock.. not ICS.
Yeah I went back to bone stock.
Here is the funny thing I have 2 notes, 1 rogers, 1 bell. When I use the rogers phone on darkstar absolutely no issues.
The bell version, it completely knocks out the AWS radio that I use and I am not able to restore it for some reason.
I had to reflash all the partitions to restore it. Tried 3 times same result on the bell version.
Wonder what's different in the i717M vs the i717R
darknoon77 said:
I guess he used this rom to back to stock.
http://forum.xda-developers.com/showthread.php?t=1657279
By the way, It's 2.3 stock.. not ICS.
Click to expand...
Click to collapse
Sk84all20 said:
I got the same problem he does and I don't know how to repartition my phone can someone help me
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Unless you have a keen understanding of how to partition a device, dont try.
Rather, use Odin or kies to push the factory image to the device, and let it run the partition mapping for you. Otherwise, you can damage the device and brick yourself.
Read up on all things note, in the general section at the top. Use the "super thread" and find the issue you are looking for.
Also, you can general search for the answers, as they are covered in many threads in this section.....g