Related
I have a rooted SE wt19i with CWM recovery installed and yesterday I wiped all the data, cache and system files to install Minimul Triumph ROM.
When I rebooted my phone it was stucked at the First Sony Ericsson screen and didnt boot into recovery. I have a Backup On My SD.
Please Help
have you tried flashing back to the original firmware using flashtool?
Yes i DId try but it doesnt even go to flash mode
Edit:I finally managed to go to flash mode. I flashed the firmware succesfully thanks kevin
First, I cannot find that kind of ROM for WT19i, could be wrong ROM to install. You can only install ROMs, that are built for your phone.
Second, you must have custom kernel to boot into custom ROM. Stock kernel only works with stock ROM. First install custom kernel(there's plenty of them in Development section, like X Kernel, Rage Kernel, bbooff's kernel etc) and then via CWM install custom ROM(install from sdcard).
Most custom kernels include CWM.
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Rudjgaard said:
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Click to expand...
Click to collapse
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
azim0106 said:
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
Click to expand...
Click to collapse
Unbrick it using the files given in the sticked thread by someguyfromhell
mihahn said:
Unbrick it using the files given in the sticked thread by someguyfromhell
Click to expand...
Click to collapse
i didn't find (Sticked thread by someguyfromhell) will u please give me the link of that thread.
i will be very thankfull to u
waiting for your reply
thanks in advance
http://forum.xda-developers.com/showthread.php?p=24136222
Sent from my SK17i using xda app-developers app
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
the most easy way to flash custom rom is to unlock your bootloader first...then flash any custom kernel that have root and CWM pre-installed...then you can flash any custom rom without any problem....
THANK YOU
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
danutzgtx480 said:
Download Flashtool from HERE
DOWNLOAD official ICS firmware from HERE
Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
How to root 4.0.4 (4.1.B.0.431)
Go to settings > Security > Mark "Unknown sources"
Settings > Developer options > Mark USB debugging
Settings > Xperia > connectivity > USB connection mode > select MSC mode
1 ) Download Xperia ray kernel from HERE
2) Go to C:/ Drive > flashtool > firmwares > delete everything present and Put the kernel ( ST18i_4.1.A.0.562_kernel.ftf )
3) Run Flashtool click on the flashing icon ( left side below "file" option)
Select flashmode > ok
Setup should be like this > select OK
Shutdown phone and press Volume Down while plug in usb GREEN light on
Flashtool may show error after flashing kernel, no worries
4) After flashing restart your device, It will not start completely, remain at Sony logo or remain blank/black.
Whatever the status is, just restart your device and proceed with the rooting--->
( Make sure you close flashtool before running the rooting toolkit )
Now connect your mobile to PC and Root Your Phone
5) Download Xperia mini 4.0.4 Kernel and flash it
Your mobile is now rooted (See if any Superuser app has been installed on your phone ) and back to life
Click to expand...
Click to collapse
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
had $tucked same situation
amphe said:
hey guys! i m using xperia mini, rooted, locked bootloader, installed clockwork recovery by using x-Parts
i decided to flash real ICS r5.1
but now... when i start my phone, sony ericsson logo did appear but it wont continue running...
i cant reboot into recovery too. i did hold volume button down and push power on button but it just wont boot into recovery mode.
b4 i try to flash the rom, i did backup in clockwork
desperately need help! :crying: thanks in advance
Click to expand...
Click to collapse
same was the problem when i rooted live with walkman... thanks to xda i came out of problem ..
problem was with kernel
i did unloked bootloader , flashed cwm and rom but i forgot to flash the kernel so i had $tucked at sonyerrison logo..
flashing computed connected worked for me
Michi_optimus_me said:
I wouldn't do it with the kernel to flash, cause if something goes wrong you have the ray kernel on mini pro and you will have to try to unlock bootloader and flash other kernel. I would just flash the ftf file for .42 and root, run local-prop and upgrade to ics and run push-root-files.
Click to expand...
Click to collapse
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
danutzgtx480 said:
If something goes wrong you just flash the official 4.1.b.0.431 ftf with flashtool and the phone will be like new but i root my phone ( Xperia mini St15i stock 4.0.4) with this metod and work like a charm
Click to expand...
Click to collapse
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
HELP NEEDED........................... Please
mihahn said:
Hmm okay I think both methods are working but the method with local-prop is easier and for noobs better I think
Click to expand...
Click to collapse
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
jesudas said:
hi to all i have just flashed mu xperia mini rooted GB .62 LOCKED BOOTLOADER with ice cream pureness v3 with x parts CWM and flashed base rom patches and also supersu after reboot my phone stucked at logo when after thinking a lot i just forgot to clean wipe cache partition but when i realized this its too late for me coz when i connected my phone reflash the rom its not showing me the LED notificatio is there any solution for it please help me guys i am total noob and its the only phone i have please do help me thanking you:crying::crying:
Click to expand...
Click to collapse
Okay, have you got latest flashtool installed? Please install all drivers for all phones and modes from flashtool installation folder -> drivers.
Turn phone off, take off battery, insert battery, hold volume down, connect usb, flash stock rom!
That should work, try it again.
Be sure the custom rom you flash is same as the base you used before. I mean if you flash an ics custom rom, you have to be on ics before, same on gingerbread
Thanks.............
mihahn said:
Just flash the original rom with flashtool. Do it like here.
Have you been on rooted ics or rooted gingerbread? Cause I think you have to be on rooted ics to install real ics, but I don't know exactly
Click to expand...
Click to collapse
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
MoonBlade said:
er its not showing LED notification while using the ROM? or during boot to go into recovery ??
Click to expand...
Click to collapse
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
jesudas said:
Thank you senior..............ya its my bad that i flashed this rom on rooted GB but after reading all instructions from thread i found it and re flashed with stock GB thank you for your reply........................
---------- Post added at 02:39 PM ---------- Previous post was at 02:33 PM ----------
During Boot to recovery................ any way i found solution for this but thanks a lot for your reply thanks man...............
Click to expand...
Click to collapse
Why don't you upgrade to ICS? that way u'll be able to use Real ICS ROM.
Hello Friend
amphe said:
OMG! THANK YOU ALL for your time to read my post and reply me!
PROBLEM SOLVED! I M SO HAPPY!
THANK YOU! THANK YOU!
Click to expand...
Click to collapse
I am having the same problem will you please let me know how the problem is solved.waiting for your valuable reply.
How to flash it..i mean after downloading stock frimware where you put files in flas
plz tell me i have same problem of that ..
Please read this!!!
People with locked bootloaders please read this
u have installed a recovery mode (using x-parts or any other methods) to your system partition. When u flash a rom, it formats system partition. so u can't go back to recovery until u bootup and install it again. to get a permanent recovery, u have to unlock bootloader and flash a kernel that have a recovery mode (it's getting installed to your boot partition). so it won't get wiped by a rom flash.
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
nrdl said:
Hello ravin
You gave us the reason, and a solution for unlocked bootloaders... The question is that the problem happens in locked ones.
Anyone knows how to solve this?
There are plenty of roms for Locked Bl, so it is just a questionvof method with the Cwm installation.
Thanks for your input!
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
mihahn said:
You could try opening the rom.zip, replace the files in the zip with the files from cwm (can be found in the forum), zip it again and flash it
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
u mean flashing cwm also with the rom?
that's a great idea!
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Flash a stock ftf file
or use pccompanion to repair
then try again and follow the instructions EXACTLY
rumnheim said:
I was using rooted Stock 4.0.3. I installed CWM recovery. I didnt unlocked bootloader. I did a full wipe but forgot to format cache, data and system. I installed Jelly Sandwich and patched it. When I reboot my phone it stucked at sony logo. When I want to open recovery it also stucks at sony logo. Also when I connect it to charger sony logo appears forever and indication led is not flashing. What can I do to solve this?
Click to expand...
Click to collapse
Use flashtool/pcc/SEUS to flash stock firmware again!
After that don't forget to wipe things!!
P.s.- if u aren't able to post probs in official thread due to lack of posts! then pm me!
Sent From my Neo V ruining JellySandwich 5.0 using Tapatalk 2
Thanks everyone. I flashed stock rom using SEUS. Phone boot up without any problem. I rooted and installed CWM then flashed JellySandwich. JellySandwich is working very well.
Kuhhan said:
help..
Click to expand...
Click to collapse
Use flashtool to flash 587 fw
Sent from my »Neo V«
Kuhhan said:
help..
Click to expand...
Click to collapse
What's the issue you face! And what all steps you've done so far?
Sent from my MT11i using xda premium
the issue he faces is he doesnt have 10 posts..nd the steps hes done so far..or rather step is spammin..
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
tasosace said:
hello everybody,i am using sony ericsson xperia neo v cyanogenmod 10 rooted and unlock bootloader....i have some issues and from a video in youtube i try to relock bootloader,now my neo v doesn't open,i try with flashtool to put stock firmware but my phone stuck in sony logo,any help please????
Click to expand...
Click to collapse
Did the flash complete successfully?did you relock bootloader?
I couldn't get you clearly!
Sent from my MT11i using xda premium
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
rspayumo said:
Good day guys! I have the same problem. It is actually my first time at this so forgive me. I was trying to install CM 10 on my Neo V. So I went to CWM, wiped data/factory, wiped dalvic-cache then went on to installing the rom. It gave the status 7 error. So I went back to the file to remove the getprop lines. Tried to flash it again, but got another error like this "set_perm: some changes failed". After rebooting, I'm stuck at the "SONY" logo. I can't go to CWM anymore and I can't go to fastboot (pressing volume up + plug usb) too. Is there any way to recover my phone? I'll appreciate any help. Thanks!
Click to expand...
Click to collapse
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Attitude.SSJ said:
You need to install cm compatible kernel... Did you unlock boatloader? Fastboot s menu button and plug usb... Go into flashmode by back button plus usb and flash stock firmware...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Ghostfreak NB said:
Did you unlock bootloader before trying out CM based ROMs
Also a clean install is what i'd suggest
First flash The kernel inside the Zip
Then,
Wipe data,cache,dalvik cache
Format data,system,cache
Install your Rom
Also ,Fastboot is not accessed by vol up button but Menu button+plug usb
Click to expand...
Click to collapse
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
rspayumo said:
Wow! That was fast! Thank you very much! Yes, I was able to unlock the phone's bootloader via fastboot way (if you will). I was trying to install cm-10-20130609-NIGHTLY-haida. I believe haida is the correct one for Neo V? Thanks again!
Thanks a lot for the fast replies! My bad on the fastboot buttons. I was able to figure that out now and also the flashmode. Right now I'm trying to download Mt11i_4.1.B.0.431_customized cenral europe 3.ftf.7z. I believe this is the stock ftf for Neo V? Another question, the boot.img is the kernel inside the cm-10-20130609-NIGHTLY-haida.zip right? Should I install it using flashmode? or should I use the CWM to install kernel? I'm really sorry for the newbie questions, I have been trying to find the answers myself but there are a ton of info and videos that always give different ways to do them. Obviously, I followed one that did not work for me. Thank you again! I'll post updates.
Click to expand...
Click to collapse
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Ghostfreak NB said:
Yup boot.img is the kernel
Flash it using fastboot mode
Then flash the Rom
Sent from my Neo v using xda premium
Click to expand...
Click to collapse
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
rspayumo said:
Goodnews to me! I was able to revive my Neo V, big big thanks to your help. I was able to install the stock ICS ftf.
So at this time, will I start again at the beginning like root, unlock bootload, install CWM again? I'm not giving up yet on this thing. :fingers-crossed: I tried to access CWM, but it is not loading at this moment so I'm guessing I have to install that again, right? Thanks again! I hope you won't give up on my newbie questions.
Click to expand...
Click to collapse
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Just flash the cm kernel... You ll get cwm... Use it to flash the rom... Don't forget to do wipes...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Will try that! Thanks sir! Big thumbs up for you! :good: I'll still post updates... :fingers-crossed:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
rspayumo said:
Just to update my case, finally, I was able to install CM 10 rom successfully. I guess the one that messed my first try is the franco kernel I installed initially before installing CM 10. Thanks a lot to all who helped! I do appreciate it very much! :good:
Click to expand...
Click to collapse
franko kernel :laugh:.. that was for nexus devices :silly:... use the kernels & roms in neo forums for neo .. :good:
Flash proper kernel and stok
Hi guys,
I decided to flash my kernel and rom etc even though I know not much about it all. Nevermind, I root my phone, unlock bootloader, install cwm, try 2 different kernels but they only boot and then nothing, just black screen. So I flash stock kernel and phone worked normally. After that I saw a couple .img files I downloaded, i tried to put them into phone somehow through flashtool, nothing waqs working so I renamed those kernels images to system.img and put it into phone with flashtool in fastboot mode, and then button Select system to flash. And now my phone is stucked at booting. Theres only sony logo until i pull the battery out. How can i flash back to stock system and where can I get those IMG files. And I cannot get to recovery mode. I did a backup but i cannot use it without getting to recovery mode.
Is there anyone who could help me?
Thank you very much and sorry for my english.
Hi guys,
I decided to flash my kernel and rom etc even though I know not much about it all. Nevermind, I root my phone, unlock bootloader, install cwm, try 2 different kernels but they only boot and then nothing, just black screen. So I flash stock kernel and phone worked normally. After that I saw a couple .img files I downloaded, i tried to put them into phone somehow through flashtool, nothing waqs working so I renamed those kernels images to system.img and put it into phone with flashtool in fastboot mode, and then button Select system to flash. And now my phone is stucked at booting. Theres only sony logo until i pull the battery out. How can i flash back to stock system and where can I get those IMG files. And I cannot get to recovery mode. I did a backup but i cannot use it without getting to recovery mode.
Is there anyone who could help me?
Thank you very much and sorry for my english.
Click to expand...
Click to collapse
You seem to be flashing kernels... May I know where you got those .img files from..
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
You seem to be flashing kernels... May I know where you got those .img files from..
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Thanks for rreply.
I used
marckernel0.3.img
and then
boot_ICS_plus_v5.img
and I got them from this forum.
I renamed them to system.img and then by using flashtool, phone in fastboot mode, I used Select system to flash so it might be the problem. Using kernel img and used them wrong way. And as I said I can't get to recovery mode. So for repairing I can only use fastboot or flash mode. I tried to repair it with SEUS. It said I have wrong system data so it cannot proceed.
Did you try flashing stock ftf through flashtool?
Sent from my Xperia Neo V using xda app-developers app
Attitude.SSJ said:
Did you try flashing stock ftf through flashtool?
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
Yes, whole story is.... I rooted phone, then unlocked BL, then install cwm, then I flashed 2 kernels, after each flash, phone booted and then it got stuck on black screen. Right after that I flashed stock kernel and phone booted and loaded normally. And then I used img files mentioned before the way I said. So I think I don't need to do anything with kernel but with system data.
You have unlocked bootloader,so flash custom kernel which have CWM in built...
Sent from my Xperia Neo V
megatpanji said:
You have unlocked bootloader,so flash custom kernel which have CWM in built...
Sent from my Xperia Neo V
Click to expand...
Click to collapse
Can you give me a link to any custom kernel? And then should I use fastboot or flash mode? I feel like I'm completely lost now.
So I used MT11i_4.1.B.0.431_kernel.ftf to flash current kernel. After it I managed to get into recovery, run latest backup. After it phone booted and loaded normally. I guess it(s the end of me trying to do something like this with my phone.
Thank you guys for your help
palix1702 said:
So I used MT11i_4.1.B.0.431_kernel.ftf to flash current kernel. After it I managed to get into recovery, run latest backup. After it phone booted and loaded normally. I guess it(s the end of me trying to do something like this with my phone.
Thank you guys for your help
Click to expand...
Click to collapse
So rename ur thread like this [ SOLVED]................ So members will know that you've solved the problem
after flashing pantom kernel v1.1b on my xperia P it wont boot.. it wont charge as well..
response of my phone:
when i plugged in the charger the led indicator turns red then it after 2 to 3 seconds, the led indicator will off.
when i press down the power button and the volume up, the led indicator turns violet.
when i press down the power button and volume down, the led indicator turns green.
any solutions?
thanks
Something went wrong on flashing the kernel I suggest you flash another kernel or flash back original firmware or flash back stock kernel @akosipolan
Theliakos said:
Something went wrong on flashing the kernel I suggest you flash another kernel or flash back original firmware or flash back stock kernel @akosipolan
Click to expand...
Click to collapse
thanks for the reply mate, i downloaded the stock firmware, and i already installed the flashtool, how do use the flashtool to flash back the stock firmware, when my phone doesn't turning on?
any suggestions/idea?
thanks
Well you press the lightning and then flasmode you go to the folder were the firmware is and you press flash! You wait then a pop up will come out! you will press the down volume and them insert the usb the led it will become kind of green and then wait make sure you have installed drivers in driver folder
akosipolan said:
thanks for the reply mate, i downloaded the stock firmware, and i already installed the flashtool, how do use the flashtool to flash back the stock firmware, when my phone doesn't turning on?
any suggestions/idea?
thanks
Click to expand...
Click to collapse
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
ChikeD said:
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
Click to expand...
Click to collapse
thanks for the reply sir, my phone is now ok.. big thanks..
ChikeD said:
Click the lightenin icon (flash) select flashmode and then select the file you download, clear all wipes and exclusde everything but kernel, then flash.
This should flash onlu kernel.
If your bootloader is locked, don't flash any custom kernels.
Click to expand...
Click to collapse
Hi
Need help even i am in the same problem I flashed the CM 11 Nightly.zip that contains the boot.img (kernel) and now my phone stops at "Sony" logo
I am Bootloader unlocked and what should I do ? is it advisable to flashmode only stock kernel or anything else ?
deepankarbu said:
Hi
Need help even i am in the same problem I flashed the CM 11 Nightly.zip that contains the boot.img (kernel) and now my phone stops at "Sony" logo
I am Bootloader unlocked and what should I do ? is it advisable to flashmode only stock kernel or anything else ?
Click to expand...
Click to collapse
If you only flashed the CM kernel then flashing stock should fix it.
Can't get into CWM recovery?
One more issue cropped up
ChikeD said:
If you only flashed the CM kernel then flashing stock should fix it.
Can't get into CWM recovery?
Click to expand...
Click to collapse
One more issue cropped up. I have completely installed CM 11 Nightly 24 for Xperia P but, the DSP Manager and Google Now force close. Google now can be activated by saying "OK GOOGLE" but doesn't work can you please guide on ?
deepankarbu said:
One more issue cropped up. I have completely installed CM 11 Nightly 24 for Xperia P but, the DSP Manager and Google Now force close. Google now can be activated by saying "OK GOOGLE" but doesn't work can you please guide on ?
Click to expand...
Click to collapse
As I don't follow CM11 development I have no clue.
Those are nightlies so you can expect issues.
Take logcat for those FCs and attach them to your question there.
Thanks
ChikeD said:
As I don't follow CM11 development I have no clue.
Those are nightlies so you can expect issues.
Take logcat for those FCs and attach them to your question there.
Click to expand...
Click to collapse
Thanks :good: