I have tried CM9 on my Razr for a while but not quite happy with it but I can not flash it back to stock ROM. Does anyone know where to look for the solutions? I have read many topics but not make it through. It keeps saying Installation abort.
Thank you in advance.
use RSD Lite to flash stock ROM Gingerbread
What he said.....make sure you download the correct fast boot files which correspond with your phone....then just use RSS lite to flash to phone. This is simple and works well
Or use the RAZR utility which is a one stop shop
Sent from my XT910 using XDA
md07 said:
use RSD Lite to flash stock ROM Gingerbread
Click to expand...
Click to collapse
This. I just did this last week (reverting from leaked ICS back to stock GB). Works fine. Just RSD to stock GB and let your phone update all the way to the latest OTA.
which version of ics are you running? 84 or 83?
ddfuji said:
which version of ics are you running? 84 or 83?
Click to expand...
Click to collapse
i used matts droid razr utility,the full version,it installs the fastboot files for you and worked great for me,was able to get back to 171 then ota to 181 root,install safestrap and voodoo all with the dru,just look it up in the forum
Related
Hi!
I saw that khold has recently posted the gsm ics ota. However it's only possible to flash it with rsd lite or similiar methods. I don't have access to a computer right now so is it possible to flash the ics update as a nandroid backup(if some one could upload it)?
My gsm razr is currenly running rooted 651.167.20.XT910.Retail.en.EU 6.1.5-167_SPU-15-M2
You can use this nandroid http://forum.xda-developers.com/showthread.php?t=1734893 it is "Latam" but works fine on european razr.
This rom is much better and faster than stock ics.
Just sayin'...
...
Well I don't want to try any roms cuz if anything goes wrong I'll be stuck without a phone for weeks
Firidan said:
Hi!
I saw that khold has recently posted the gsm ics ota. However it's only possible to flash it with rsd lite or similiar methods. I don't have access to a computer right now so is it possible to flash the ics update as a nandroid backup(if some one could upload it)?
My gsm razr is currenly running rooted 651.167.20.XT910.Retail.en.EU 6.1.5-167_SPU-15-M2
Click to expand...
Click to collapse
you can't flash a ics nandroid on a gb rom
Sorry to hear that. Guess I gotta borrow a computer somewhere.
BakaPhoenix said:
you can't flash a ics nandroid on a gb rom
Click to expand...
Click to collapse
oh, i didn't notice it was gb, sorry
Hi everyone I'm in a serious problem here.
I'm trying to revert my Droid Razr back to its stock Rom using RSD Lite.
I Have tried different versions of Rsd Lite and I have the latest drivers installed but it still wont work!
View attachment 1295713
And thats the error I get
Can anyone help me please!!!!
Are you using a 64bit windows machine?
adaimespechip said:
Are you using a 64bit windows machine?
Click to expand...
Click to collapse
32 Bit Windows 7
I'm really desperate guys!
if you flashed ics you reflash ICS...
disable your antivirus
disable your firewall
if possible use other computer or notebook...
if possible use windows 7 32 bits or other windows system...
Jeanjacq said:
Hi everyone I'm in a serious problem here.
I'm trying to revert my Droid Razr back to its stock Rom using RSD Lite.
I Have tried different versions of Rsd Lite and I have the latest drivers installed but it still wont work!
View attachment 1295713
And thats the error I get
Can anyone help me please!!!!
Click to expand...
Click to collapse
Looks like you're going to a Gingerbread build. If you have a Motorola ICS installed you can't go back easily...
Find an ICS fastboot, or is ICS even available on your carrier?
Sent from my XT894 running ICS
danifunker said:
Looks like you're going to a Gingerbread build. If you have a Motorola ICS installed you can't go back easily...
Find an ICS fastboot, or is ICS even available on your carrier?
Sent from my XT894 running ICS
Click to expand...
Click to collapse
I don't have ICS. No. I am going back to stock from The Artic Rom (gingerbread)
Solution found!
I found the solution
I tried a different fastboot file associated with my region and the flash was successful.
Thank you everyone for their time.
Jeanjacq said:
Hi everyone I'm in a serious problem here.
I'm trying to revert my Droid Razr back to its stock Rom using RSD Lite.
I Have tried different versions of Rsd Lite and I have the latest drivers installed but it still wont work!
View attachment 1295713
And thats the error I get
Can anyone help me please!!!!
Click to expand...
Click to collapse
If your is a droid razr then i think it is XT912. But in the screenshot i see that you used a XT910 sbf file!
Try this : http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
or you can use mattlgroff's utility found here: http://forum.xda-developers.com/showthread.php?t=1486718 (choose the one for CDMA)
Good luck!
Important Question
Hello Guys
I am having Telstra XT925 and i bricked it and after long reading i came up with custom roms and all these stuff, now am running Beanstalk custom ROM 4.3 and am wondering if i can use RSD lite to flash stock firmware for my device as i found it but my device came with android 4.0.4 and now i found Telstra SBF 4.1.2 for xt925, i dont know if i can use it.... also i tried to check if RSD lite will recognize my device or not now i have all necessary drivers installed booted in fastboot and it says fastboot connected but on RSD lite in device properties everything is just has N/A in front of it ! am not comfortable with that, i want to flash stock to be able to take stock backup as i dont have one till now
Device: Telstra XT925
ROM : Beanstalk
Android : 4.3
Recovery : TWRP
Bootloader : Unlocked
Windows: 7 32 bit
RSD version : 6.1.5
Location : Now in Egypt
Please Please Help me Guys
Hey guys, the guide to upgrade to JB says to flash clean ICS... I have a rogers razr with system: 672.180.352.XT910
Can I flash this from rsd: (Will it brick me?)
6.7.2-180_SLC-35_R02_SIGNLATAM_SPYDERICSROGERS_P012_A012_HWp2b_CFC_fastboot.xml.zip
Blur Version 672.180.352.XT910.Rogers.en.CA
Link.
Thanks...
I used the Droid Razr Utility 1.82 to go back to the stock ICS ROM. Then I flashed to that leaked Verizon JB ROM.
And from THERE I flashed the "DiaBiTis.SE.JB.ROM.v2.0.0-R3Ds" ROM and it's been great.
I'm not sure if that helps you.
Alaq said:
Hey guys, the guide to upgrade to JB says to flash clean ICS... I have a rogers razr with system: 672.180.352.XT910
Can I flash this from rsd: (Will it brick me?)
6.7.2-180_SLC-35_R02_SIGNLATAM_SPYDERICSROGERS_P012_A012_HWp2b_CFC_fastboot.xml.zip
Blur Version 672.180.352.XT910.Rogers.en.CA
Link.
Thanks...
Click to expand...
Click to collapse
Why do you want to go back to ICS? There IS a root method for JB fyi
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
dewie68 said:
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
Click to expand...
Click to collapse
Why do you talking about ICS and Gingerbread when you are on JB?
And yes,you can't go back and you don't need to,just root the phone,install BMM or Safestrap and flash the rom.
Sent from my Razr XT910
welder73 said:
Why do you talking about ICS and Gingerbread when you are on JB?
And yes,you can't go back and you don't need to,just root the phone,install BMM or Safestrap and flash the rom.
Sent from my Razr XT910
Click to expand...
Click to collapse
Because I wasn't sure if i had to be on the original Firmware that the phone came with. Alrighty, thank you!
dewie68 said:
Because I wasn't sure if i had to be on the original Firmware that the phone came with. Alrighty, thank you!
Click to expand...
Click to collapse
No problem,happy flashing.
Sent from my Razr XT910
dewie68 said:
Alrighty! So I have a Razr Maxx on Verizon running 4.1.2 JB. I'm looking to flash CM 10.1 on this guy.
So I've figured out that I can root it without a problem. I'm seeing that you can use Razr Blade or ADB. At any rate, i'm trying to figure out if in order to flash CM 10.1, you need to be on stock Firmware. Do I need to be on ICS or Gingerbread (whichever came on Razr) to flash CM 10.1? If so, all the tools that would allow me to do this tell me that one can't go from JB to ICS. Can anyone help out? Also, if i'm correct, you need to first root, then flash. Right? Thanks!
Click to expand...
Click to collapse
Stock Firmware means anything released by Motorola.
The rough process is simple.
Root
Install Safestrap(safer to use) or BMM(many advanced options)
Download the ROM & Gapps(optinal)
Boot into Recovery
Create A rom-slot
flash your ZIP
Reboot
neo.ank said:
Stock Firmware means anything released by Motorola.
The rough process is simple.
Root
Install Safestrap(safer to use) or BMM(many advanced options)
Download the ROM & Gapps(optinal)
Boot into Recovery
Create A rom-slot
flash your ZIP
Reboot
Click to expand...
Click to collapse
This is helpful! Thank you! When put in that simple terms, it's much more clear. Thanks.
Hello,
I've get a old razr and want to sell it. But i need to get back to GingerBread before.
I don't know if it's possible.
My Razr is under CM12.1 with the last safestrap and Fasboot v0A.77.
Another question, where can i find the sbf files for GB ? All links are dead.
Thanks for answer.
bab1c said:
Hello,
I've get a old razr and want to sell it. But i need to get back to GingerBread before.
I don't know if it's possible.
My Razr is under CM12.1 with the last safestrap and Fasboot v0A.77.
Another question, where can i find the sbf files for GB ? All links are dead.
Thanks for answer.
Click to expand...
Click to collapse
If your stock rom was GB then you can flash GB sbf file but if you upgraded to ICS or JB you can't go back,it's impossible.
Here is everything you need
http://forum.xda-developers.com/showthread.php?t=3023837
Sent from my Razr XT910
welder73 said:
If your stock rom was GB then you can flash GB sbf file but if you upgraded to ICS or JB you can't go back,it's impossible.
Here is everything you need
http://forum.xda-developers.com/showthread.php?t=3023837
Sent from my Razr XT910
Click to expand...
Click to collapse
Thanks,
I've already update to stock ICS and stock JB before install CM12.1
So i can't get back to GB....
bab1c said:
Thanks,
I've already update to stock ICS and stock JB before install CM12.1
So i can't get back to GB....
Click to expand...
Click to collapse
No,you can't,sorry...
But why it matters?Flash JB with Rsd Lite and the phone will be clean,you can sell it like that...
Sent from my Razr XT910
welder73 said:
No,you can't,sorry...
But why it matters?Flash JB with Rsd Lite and the phone will be clean,you can sell it like that...
Sent from my Razr XT910
Click to expand...
Click to collapse
The buyer want a Razr with GB, i don't know why but....
Thanks