After installing after installing the bootloader, root, DooMKernel & Recovery, my phone can not star,can not connect computer, flashtool, only flashes red constantly
pleaple help, thank!!!!!
Where u located?
I would guess somehwere without an 'Enter' key on the keyboard
Hi Hailan,
If you have installed the doom kernel and the recovery correctly, just restart in flashboot mode (blue led) and you can flash some stock kernel which you can dld from the xperia s android dev. I had the same problem after flashing some CWM beats audio from play. it became alright after flashing prerooted stock rom.
Related
Hey
A freind of mine have the Xperia P.
without root and CWM and other things.
But he have a bootloop.
I used the flashtool of bin4ry and androxyde to flash the European RUU.
But i get a booltoop again. I want to install a kernel, but then an error pop up that my device has to be rooted.
fastboot and charging is working well.
Also the phone boots, that i can see, " Updating Apps. 2 of 2"
And then the reboot.
So does anyone know anything?
I'm happy about any tip
Thanks
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
digar4o said:
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
Click to expand...
Click to collapse
AOKP is not stock rom..
so its kernel is also not based n stok rom...thats why you got bootloop...
just download kernel which is based on sock rom like trancsend kernek...or phantom...
if you have jb then experimenatal kernel will be best....
and use flashtool to flash kernel...it is the easiest way to flash kernel..
all this kernels are prerooted and has cwm 6.x.x recovery.....
you will get this kernels in devlopment section....
Thank you!
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
digar4o said:
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
Click to expand...
Click to collapse
Most kernels nowadays have light notification or vibration or borh for the time you need to press the volume button for cwn, if yours does you only need to press it once within 3 seconds.
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh:
Hello. I've done root on my Sola, then cmw recovery. I was trying to install CM 11 KitKat for Sola and after flashing from boot.img and wiping all data unfortunately I escaped from cwm. Now, when i'm trying to enter recovery, phone stuck on Sony logo, flashing with all LED colours and vibrating once. I can fastboot on it, so it isn't bricked. What can I do now, help me pls.
Fastboot a stock based custom kernel/fastboot stock kernel
Sent my AOSP Xperia P
Hi All,
I am new to the forum and new to rooting. I did loads of reading and thought that I would give rooting a go on my Sony Xperia Z Ultra. After rooting, and doing dual boot install I downloaded Dirty Unicorns 4.4.4 and Gapps. Booted into recovery and flashed the two zip files. After booting up the rom, it keeps crashing and giving a systemui fail / crash message. So I cannot do anything with the rom because the message comes up a second after I close it.
Not only that, there is now no custom recovery on my phone. Has anyone else been in this situation or can anyone please let me know what I can do to either flash a custom recovery?
I have also tried connecting my phone to the Flashtool to flash the stock rom, however as soon as I connect my phone to my pc it boots the system up and doesnt allow me to go into flash / fastboot mode.
Please help!
Thanks,
RJ
Hi,
I will have your thread moved to your device section.
Good luck!
Darth said:
Hi,
I will have your thread moved to your device section.
Good luck!
Click to expand...
Click to collapse
Thanks! Didnt know where to post.
Recovery should be included in the ROM (I've not flashed it though to test)
press the vol. up key just after booting when the LED turns purple should do the trick.
Do you want to load another custom ROM [1] or go back to Stock Sony [2]?
[1] Download custom ROM, flash boot.img in fastboot, flash ROM from recovery with wipes
[2] Download a FTF and flashtool (http://flashtool.net), flash FTF - fully clean Sony system again
RJacobz said:
Hi All,
I am new to the forum and new to rooting. I did loads of reading and thought that I would give rooting a go on my Sony Xperia Z Ultra. After rooting, and doing dual boot install I downloaded Dirty Unicorns 4.4.4 and Gapps. Booted into recovery and flashed the two zip files. After booting up the rom, it keeps crashing and giving a systemui fail / crash message. So I cannot do anything with the rom because the message comes up a second after I close it.
Not only that, there is now no custom recovery on my phone. Has anyone else been in this situation or can anyone please let me know what I can do to either flash a custom recovery?
I have also tried connecting my phone to the Flashtool to flash the stock rom, however as soon as I connect my phone to my pc it boots the system up and doesnt allow me to go into flash / fastboot mode.
Please help!
Thanks,
RJ
Click to expand...
Click to collapse
Can you clarify what you mean by "doing dual boot install", are you referring to the multirom mod or something else.
Did you unlock your bootloader?
Because I see no mention of that and when I flashed scrubbers port of kitkat via twrp it bricked my ultra and I had to buy a new one.......
blueether said:
Recovery should be included in the ROM (I've not flashed it though to test)
press the vol. up key just after booting when the LED turns purple should do the trick.
Do you want to load another custom ROM [1] or go back to Stock Sony [2]?
[1] Download custom ROM, flash boot.img in fastboot, flash ROM from recovery with wipes
[2] Download a FTF and flashtool (http://flashtool.net), flash FTF - fully clean Sony system again
Click to expand...
Click to collapse
Hey how to unlock the bootloader in sony phones and after its unlocked how to go to fastboot mode..