Hey
A freind of mine have the Xperia P.
without root and CWM and other things.
But he have a bootloop.
I used the flashtool of bin4ry and androxyde to flash the European RUU.
But i get a booltoop again. I want to install a kernel, but then an error pop up that my device has to be rooted.
fastboot and charging is working well.
Also the phone boots, that i can see, " Updating Apps. 2 of 2"
And then the reboot.
So does anyone know anything?
I'm happy about any tip
Thanks
Related
Hello guys. My problem is that I tried to install cyanogen mod 7.1 on my xperia ray. I did everything as i was said in forum. Finally i got it on, but is is bootlooping and none of the solutions work. I am really stuck. I tried to download st18 as a .tft file and install though flashtool, but i cannot do it because my phone is not running in flashmode. I am not sure if this is even possible. Anyway, if anyone could be bothered to give any advice on how to return to the st18 and forget about this idea, i would be really thankful!
download cyanogenmod 7.0.1 and install it , it will work
i am wondering why flashmod is not working
in future whenever you install custom rom , make a complete backup of stock rom
i have a backup of my stock rom on sd card , i can revert back to stock any time .
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
digar4o said:
Hello there,
I have recently attempted to install a custom ROM on my Xperia U . I rooted using bin4ry , then unlocked bootloader. Everything was fine up to that point. Then I tried to use RecoverX to install CWM. The tool said it was a success, but device could not boot into recovery.It looked like the tool did nothing. I then found a custom kernel by AOKP that had CWM Recovery in it. I flashed and got recovery , but stuck in bootloop. I recovered from this by flashing B.10 stock firmware on my Xperia U using flashtools. I am now looking for ways to install CWM recovery safely.
What's the best way to install CWM in my current situation?
What caused the bootloop I experienced(out of curiosity)?
Click to expand...
Click to collapse
AOKP is not stock rom..
so its kernel is also not based n stok rom...thats why you got bootloop...
just download kernel which is based on sock rom like trancsend kernek...or phantom...
if you have jb then experimenatal kernel will be best....
and use flashtool to flash kernel...it is the easiest way to flash kernel..
all this kernels are prerooted and has cwm 6.x.x recovery.....
you will get this kernels in devlopment section....
Thank you!
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
digar4o said:
Got it working!
I started off by installing transcendence kernel for stock ROMs. That went flawlessly and so I was presented with CWM recovery(which I started by repeatedly pressing Vol- when the transcendence logo comes up). Went to look for a ROM and found MIUI v4 for Xperia U, followed the instructions and flashed with CWM recovery.Very beautiful ROM. I got all my files from the Xperia U Development section.
Thanks for your help and a big thank you to the developers who make this possible. highfive:
Click to expand...
Click to collapse
Most kernels nowadays have light notification or vibration or borh for the time you need to press the volume button for cwn, if yours does you only need to press it once within 3 seconds.
First off my tablet is the Xperia Sony Tablet Z Wi-Fi Only. And i'm new to Sony devices
I started rooting and unlocking the bootloader. I rooted this tablet with DoomLords Rooting http://forum.xda-developers.com/showthread.php?t=2333566 it all went perfect. After that I started to unlock the bootloader with the sony instructions http://unlockbootloader.sonymobile.com/ .
Then, i was trying to get a custom recovery, I found this one http://forum.xda-developers.com/showthread.php?t=2433466 and it installed.
And lastly I was looking for a Rom this is where it all messed up.... I was looking for Pollux_Windy roms which are for the Xperia Tablet WiFi Only Right???? So i downloaded a rom and when I tried to install it thru the recovery it kept telling me Failed because I was using a Pollux not a Pollux_Windy. I tried 4 roms and same error. After that I though i should try a Pollux rom and that was a mistake.. I tried to install Cm11 for pollux and it gave me something about metadata error( I don't really remember) and the installation aborted, I restarted and Now its on a bootloop.. The Sony logo keeps popping up and it restarts.. Is there anyway to fix this?? Is there like any guide like on the galaxys that u can just go to download mode and odin back to stock and its all good?
jordannike said:
First off my tablet is the Xperia Sony Tablet Z Wi-Fi Only. And i'm new to Sony devices
I started rooting and unlocking the bootloader. I rooted this tablet with DoomLords Rooting http://forum.xda-developers.com/showthread.php?t=2333566 it all went perfect. After that I started to unlock the bootloader with the sony instructions http://unlockbootloader.sonymobile.com/ .
Then, i was trying to get a custom recovery, I found this one http://forum.xda-developers.com/showthread.php?t=2433466 and it installed.
And lastly I was looking for a Rom this is where it all messed up.... I was looking for Pollux_Windy roms which are for the Xperia Tablet WiFi Only Right???? So i downloaded a rom and when I tried to install it thru the recovery it kept telling me Failed because I was using a Pollux not a Pollux_Windy. I tried 4 roms and same error. After that I though i should try a Pollux rom and that was a mistake.. I tried to install Cm11 for pollux and it gave me something about metadata error( I don't really remember) and the installation aborted, I restarted and Now its on a bootloop.. The Sony logo keeps popping up and it restarts.. Is there anyway to fix this?? Is there like any guide like on the galaxys that u can just go to download mode and odin back to stock and its all good?
Click to expand...
Click to collapse
I would try to re-lock the bootloader and use the pc companion to put all back to normal....
Or you can try with flash tools if you don't want to re-lock.
I've completely bricked mine, I was on your situation and I start to hack as if I knew what I was doing... Now I wish I did a step back first, and start over...
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh:
Hi,
I followed the steps to use SJB Jellybean on my Xperia Neo.
I found out that I had messed up by not flashing .587 ICS after getting the symlink error.
Problem is, I can't flash the .587 ICS because FlashTool can't find my phone.
I can't boot up my phone again as it gets stuck on the Sony boot screen.
How do I get my phone booted up/get .587 flashed?
Can someone help me please
Is that still can charging?
As I know, theres no way step can make some deadboot if u not mess unlockbootloader