Hi,
I'm on Jokers CM9 since yesterday and have noticed that the WIFI sleep policy won't work properly.
Wifi keeps always on, no matter what I set in the advanced wifi settings.
I'm using beta 0.6.1 with kernel cm9 1.0 v4.
Someone has a solution for this?
Update:
1. wiped davilk an cache, don't fix the problem.
2. wiped everything (fastboot full wipe and wiped a second time via recovery(romracers))
flashed rom (twice), flashed gapps, flashed kernel (jokers 1GHz v4), fixed permissions
WiFi is still on all the time
any ideas?
Bananenbieger said:
Update:
1. wiped davilk an cache, don't fix the problem.
2. wiped everything (fastboot full wipe and wiped a second time via recovery(romracers))
flashed rom (twice), flashed gapps, flashed kernel (jokers 1GHz v4), fixed permissions
WiFi is still on all the time
any ideas?
Click to expand...
Click to collapse
Try wifi keep alive in the play store. Or just simply turn it off.
Related
ok i attempted to install BAMF Remix v1.6. is there a way to confirm that this was flashed properly? i still have bloatware like blockbuster etc. i think i missed something along the way.
is it possible i just did a factory reset?
thanks
markkal123 said:
ok i attempted to install BAMF Remix v1.6. is there a way to confirm that this was flashed properly? i still have bloatware like blockbuster etc. i think i missed something along the way.
is it possible i just did a factory reset?
thanks
Click to expand...
Click to collapse
How did you flash it? Did you do it through ROM Manager? Did you wipe data and cache? Something's not quite right, the bloatware should be gone.
i am having the same issue. are you also missing stuff like the notification power control widget?
io flashed mine from cwm and wiped everything.
phatjames167 said:
i am having the same issue. are you also missing stuff like the notification power control widget?
io flashed mine from cwm and wiped everything.
Click to expand...
Click to collapse
Hmm. Count me in on this one too then: http://forum.xda-developers.com/showthread.php?t=1069980
count me in as part of the galactically stupid. (worse than nube)
go to here http://forum.xda-developers.com/showthread.php?t=1027804
download and install
BAMF Remix v1.6:http://tinyurl.com/3wkpmh3
MD5: CF461768DBC8A729CB7D28B97D5B8717
download and install
BAMF Remix Patch 1.6.2: http://tinyurl.com/3ntawj6
MD5: d45d597d42d40ca31319786cfb9450dc
i was only installing BAMF Remix Patch 1.6.2 not realinzing it is only a patch to BAMF Remix v1.6!!!
i booted into ClockworkMod
everything now appears to be as expected for the ROM
thanks for your help.
it looks like this worked. when it first boots though the wallpaper is black with a red streak but then changes to the default wallpaper from stock. is that normal?
That got me closer to everything being 100%. I installed Remix 1.6 and 1.6.2 and I noticed changes like the battery indicator and the market being black (very nice, btw), but I still have bloat & the notification bar is missing. Wiped Dalvic Cache both times, wiped data fully when I installed the main BAMF 1.6 at the start of this.
aerojad said:
That got me closer to everything being 100%. I installed Remix 1.6 and 1.6.2 and I noticed changes like the battery indicator and the market being black (very nice, btw), but I still have bloat & the notification bar is missing. Wiped Dalvic Cache both times, wiped data fully when I installed the main BAMF 1.6 at the start of this.
Click to expand...
Click to collapse
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
devindpotts said:
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
Click to expand...
Click to collapse
I did the install through the ROM manager, so I'm hoping your solution works out. I'll give it a try this evening. Thanks for the suggestion!
aerojad said:
I did the install through the ROM manager, so I'm hoping your solution works out. I'll give it a try this evening. Thanks for the suggestion!
Click to expand...
Click to collapse
Actually I just looked and 1.6.3 is an entire rom instead of a patch so you can skip flashing 1.6. And just flash 1.6.3 after wiping data/cache/davlik cache.
devindpotts said:
Actually I just looked and 1.6.3 is an entire rom instead of a patch so you can skip flashing 1.6. And just flash 1.6.3 after wiping data/cache/davlik cache.
Click to expand...
Click to collapse
Thank you very much, your suggestions were exactly what I was looking for. Now have that full BAMF Remix experience
aerojad said:
Thank you very much, your suggestions were exactly what I was looking for. Now have that full BAMF Remix experience
Click to expand...
Click to collapse
Not a problem at all, enjoy.
devindpotts said:
I had this same exact issue. The cause of mine was installing through ROM Manager. I was wiping everything that should be just like you are it sounds. The fix I found was rebooting into recovery and flashing manually. There is an option in ROM manager to reboot into recovery. Once you are into recover wipe data/cache three times. Wipe cache partition three times. Wipe Davlik Cache(Under advanced menu) three times. I usually wipe three just to be sure everything is clean before I flash. Flash 1.6. Now load 1.6.3(since it's out now) onto the SD card. Boot into recovery again, wipe cache partion and davlik cache three times. Install 1.6.3.
Click to expand...
Click to collapse
I had the same issue and this worked for me. I just reflashed 1.6.3 directly from CWR (after wiping everything 3x) and everything worked correctly (notification widget, etc.)
thanks for the help
I am glad I found this, I had this same issue and it was driving me nuts. I'm reinstalling now and hopefully everything just comes out perfect.
I am adding this to my list of why I don't like RM.
Just got this awesome phone today, finally an upgrade from the supersonic... anyway i flashed the aokp from: here and i cant seem to get the wifi on, was wondering if anyone else had this issue
to all that see this with the same problem...
using TWRP wipe cache, delvik, data, AND SYSTEM
reflash and with gapps and you should be good to go...
so ive had a bunch of issues with this, but now everything seems to be running smooth, except my wifi. i cant get it to turn on after wiping caches, re flashing both rom and kernal, everything. i dont know what to do next, plz help someone
ixi_devo_ixi said:
so ive had a bunch of issues with this, but now everything seems to be running smooth, except my wifi. i cant get it to turn on after wiping caches, re flashing both rom and kernal, everything. i dont know what to do next, plz help someone
Click to expand...
Click to collapse
I flashed the new Viper 2.0 and I am having the same problem. I came from Elegancia ROM, flashed the kernel for viper then did factory reset, cache and dalvik wipe for 2.0 independently before full wiping in the ROM. Everything else seemed to work but I remember at the set up screen there wasn't an option to install Wi-Fi.
I tried flashing the ROM again on top of the newly installed viper 2.0 but still the Wi-Fi just says it's turning on.
Going to start over again with full wipe to see if it works this time.
Edit: shouldn't have said everything else worked because didn't do full test. Just got install failed message and next screen said install successful where the reboot system, wipe buttons are. Does boot and go through motions but no radio it seems. MD5 checked out for both kernel and ROM. Starting over with new downloads.
effezie said:
I flashed the new Viper 2.0 and I am having the same problem. I came from Elegancia ROM, flashed the kernel for viper then did factory reset, cache and dalvik wipe for 2.0 independently before full wiping in the ROM. Everything else seemed to work but I remember at the set up screen there wasn't an option to install Wi-Fi.
I tried flashing the ROM again on top of the newly installed viper 2.0 but still the Wi-Fi just says it's turning on.
Going to start over again with full wipe to see if it works this time.
Edit: shouldn't have said everything else worked because didn't do full test. Just got install failed message and next screen said install successful where the reboot system, wipe buttons are. Does boot and go through motions but no radio it seems. MD5 checked out for both kernel and ROM. Starting over with new downloads.
Click to expand...
Click to collapse
Ok so here was my soultion after msgn turge, the kernal in the ZIP folder is ****ed up, u need to go to post 2 in the thread (nice bold red note cause of me haha) get that kernal. Now when I went to flash, I usually use fastboot flash bootimg boot.img
For what ever reason I got many errors until I did full wipe, caches and all, and before I let it try to boot I caught it into boot loader .
To flash it sucessful I had to use fastboot flash boot boot.img. very subtle difference from the other one... But made all the difference.
Full working here, clean smooth. WiFi on.
ixi_devo_ixi said:
Ok so here was my soultion after msgn turge, the kernal in the ZIP folder is ****ed up, u need to go to post 2 in the thread (nice bold red note cause of me haha) get that kernal. Now when I went to flash, I usually use fastboot flash bootimg boot.img
For what ever reason I got many errors until I did full wipe, caches and all, and before I let it try to boot I caught it into boot loader .
To flash it sucessful I had to use fastboot flash boot boot.img. very subtle difference from the other one... But made all the difference.
Full working here, clean smooth. WiFi on.
Click to expand...
Click to collapse
My problem was how I flashed the kernel. As soon as I started over I saw what was wrong with my preperation. Glad your up and running.
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
efuzone said:
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Is the phone branded Verizon? If it is, use the Spyder version. If not, UTMS Spyder.
I gave up on the Liquidsmooth rom. I went with AxxionKat and it runs so much better. Not one problem.
pearlheartgtr said:
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
Click to expand...
Click to collapse
since new nightly build already available (LS-KK-v3.2-2014-08-16), it will be good idea to upgrade, just flashed this morning & everything is fine except moving from dalvik to ART caused bootloop..
I'll stick with AxxionKat. I've had absolutely no issues with it thusfar.
I flashed boeffla 2.4beta4 omnirom NG on my neatrom7.0. Everything is fine when suddenly i realize that i can't turn on my location setting. Although i reboot my phone many times. Before this i used sale kernel.
Hi, you can try wiping cache and dalvik from recovery.