I flashed boeffla 2.4beta4 omnirom NG on my neatrom7.0. Everything is fine when suddenly i realize that i can't turn on my location setting. Although i reboot my phone many times. Before this i used sale kernel.
Hi, you can try wiping cache and dalvik from recovery.
Related
Hello, I am having issues with my phone (Optimus V) after installed a custom ROM. I have AOSP 2.3.4/CM7 and thunderc 1.1.0. My issue is that every time I reboot my phone, it goes into recovery mode and wipes all data out and restarts the phone, so I have to go through the initial setup every single time. I don't know what to do to solve this issue. Thank you very much for your help in advance.
Wipe system, data, cache, and dalvik's cache, and re-install aosp's, or recover from a backup. Also, make sure you're not running - problem solved.
Hi,
I'm on Jokers CM9 since yesterday and have noticed that the WIFI sleep policy won't work properly.
Wifi keeps always on, no matter what I set in the advanced wifi settings.
I'm using beta 0.6.1 with kernel cm9 1.0 v4.
Someone has a solution for this?
Update:
1. wiped davilk an cache, don't fix the problem.
2. wiped everything (fastboot full wipe and wiped a second time via recovery(romracers))
flashed rom (twice), flashed gapps, flashed kernel (jokers 1GHz v4), fixed permissions
WiFi is still on all the time
any ideas?
Bananenbieger said:
Update:
1. wiped davilk an cache, don't fix the problem.
2. wiped everything (fastboot full wipe and wiped a second time via recovery(romracers))
flashed rom (twice), flashed gapps, flashed kernel (jokers 1GHz v4), fixed permissions
WiFi is still on all the time
any ideas?
Click to expand...
Click to collapse
Try wifi keep alive in the play store. Or just simply turn it off.
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
efuzone said:
I have created rom slot 1, installed liquidsmooth build 07/06, it is stuck on boot animation i did all like factory reset wipe cache dalvik cache... again i installed by removing data and system partitions and it was installed and started but it got hang... i again went to recovery wipe cache and dalvik again stuck on animation logo.... i tried before CM rom it was working fine...
Device is i think XT912 cdma and gsm.. i am using gsm
Sent from my DROID RAZR using XDA Free mobile app
Click to expand...
Click to collapse
Is the phone branded Verizon? If it is, use the Spyder version. If not, UTMS Spyder.
I gave up on the Liquidsmooth rom. I went with AxxionKat and it runs so much better. Not one problem.
pearlheartgtr said:
I'm posting this here because I don't have enough posts yet for the actual Liquidsmooth thread in development.
My phone is an XT912 flashed to Page Plus.
I was running the 3/27 spyder (if I remember correctly) version since March with little to no problems. Yesterday, I decided to update the rom to the 0806 spyder version on slot 2 (Safestrap) with PA mini GAPPS. I first did a dirty install over the previous version (read on the thread that some people had no problems doing that).
Things seemed to go fine for a few hours until I tried to delete some files on my sd card and internal storage while it was plugged into my computer. Some folders showed that they were empty (which they weren't), they were fine when I checked in ES File Explorer afterwards. So I rebooted into recovery to wipe the cache and dalvik. Reboot the phone and system ui immediately was stopping, over and over again. I got the phone back into recovery, did some cache and dalvik wipes, reinstalled, wiped again, and rebooted. System ui has stopped.
I booted back into recovery, factory reset slot 2, wiped caches, reinstalled the rom and gapps, another wipe, and rebooted. Profit! The only thing I had to do was futz with some settings to get 3G working again. All was well for the rest of the day and night until I decided to update Viper4Android. Viper rebooted the phone and I was back to the system ui crashing again. Meanwhile, I had rebooted the phone several times to fix the 3G and all was fine. Tried the whole full wipe and reinstall a couple of times (as per one of the posts that said to wipe, reinstall, wipe cache, reboot system, boot to recovery, wipe caches, reinstall, wipe caches, and finally reboot system. No go.
I saw that I'm not the only one this is happening to in the LS thread. Anyone have any ideas? I really can't get in to change any settings because the error starts as soon as the phone is booted. I have to try and get it to reboot in between tapping "ok" on the error and tapping "reboot" and "recovery".
Click to expand...
Click to collapse
since new nightly build already available (LS-KK-v3.2-2014-08-16), it will be good idea to upgrade, just flashed this morning & everything is fine except moving from dalvik to ART caused bootloop..
I'll stick with AxxionKat. I've had absolutely no issues with it thusfar.
Hi, Yesterday I flashed EMUI 3 onto my phone over CM12.1. I cleaned the dalvic cache and I also installed GAPPS. When the ROM loaded up, it said that the data in the data partition could not be used and asked me to wipe the Data Partition. I accepted because I had backed up all the information. It starts and about 30 seconds in the phone just switches off, but without any warning, No shutting down message or power off, nothing just on and then blank. So I turned my phone on and it just boots straight into recovery. I have restored from a backup, flashed my previous ROM. Re-Flashed the Rom I had, Wiped the Dalvic Cache, The cahce, the data partition and still no luck
Does anyone know what I can do??
Also another thing, When I turn my phone on, It says Honor (Its a Huawei ASCEND phone...) After flashing EMUI it said honor instead of Ascend, So I think its overwritten my bootloader. BTW, I was able to boot into my phone using said bootloader before, it was only after i selected to wipe and it blanked the boot loop started.
Found a Solution!!!
Fixed I installed PhilzTouch for the G620S, wiped all user data (cleaned for new rom) and re-installed CyanogenMod 12.1.
Thank you Philz!!!!!
So after I pretty much flash any stock rom after some mins of usage the phone completely hangs. I tried existenz,mx rom, Original Stock Rom and everything freezes.
Some freezes during the main setup screen on wifi, some freezes after getting to home screen and it varies
I tried flashing the bootloop fix and also wiping the dalvik/art cache and still same.
Any ideas?
UPDATE : Fixed it by using the advanced wipe and selecting everything except External Storage and OTG.