How to downgrade from ICS 4.0.3 to 2.3.4 I have downloaded 2.3.4 rom just want to downgrade faster to see if I will get rebooting issues
I have tried with ODIN but it doesn't boot up just samsung galaxy s2 logo hangs up do I have to tick phoneboot loader uptade in odin ?
Wrong section
Full wipe
Do not tick phone bootlader update or repartition you will easily brick your phone just reboot your into recovery mode and select wipe data factory reset
aitlbach said:
Do not tick phone bootlader update or repartition you will easily brick your phone just reboot your into recovery mode and select wipe data factory reset
Click to expand...
Click to collapse
I did WIPE DATA FACTORY RESET
but same problem it shows that can't find E: data chache etc
sounds like cant find path to folders
Related
Hi,
I updated my Galaxy SII to ICS (BVLPB) via Kies and I lost the previews root, now I tried to root it again with method from Chainfire but with no luck and my phone don't start anymore. I tried to put back the stock kernel from intratech but still with no luck.
I can still go to download mode or recovery mode, but this is the only thing I can do.
Now the question is: What can I do to fix my phone, can I fix it?
Thank you very much.
yes you can
go into download mode use fusdownloader to get a ICS stock rom for your galaxy
open odin 1.85 plug in phone select pda and add the downloaded rom (from fus) and then apply the update
this should fix your phone and restore it to ics
...
Did you try: Wipe data/factory reset and wipe cache ?
Try a wipe data/factory reset, if it still doesn't fix it, grab an official ICS version here and flash it with Odin.
Btw, be sure to read the instructions for flashing on that thread.
Thank you all... I manage to make him start again... I didn't try flashing the stock rom because I was afraid that I'll lose all my data.
Thank you all again.
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
tried factory reset?
use your backup in recovery
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
You have to do a data wipe in recovery to fix that.
Do a full wipe. Factory reset + wipe cache, dalvik and system
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
ichrypko said:
i have used the jb rom on my sg3, so far so good... when i try to go to a 4.0.4 rom, it stay stucked on the samsung logo...
how can i fully reset the phone on 4.0.4?
Click to expand...
Click to collapse
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
nhariamine said:
Go to ClockWorkMod:
1- Turn off Your device
2- Press and hold this combination: up volume - menu button - power button
3- When you're in Clockwork mod search and choose factory reset4
4- Then confirm factory reset and use Pc Odin and flash a new ROM in Download Mode
Hope this helped
PS: Factory reset will erase everything So backup ur files, but in your case it's not necessary knowing that it's stuck in bootloader
Download mode for PC ODIN flash:
-turn off you device
-Download Mode: Press and hold :down volume button - menu button - power button
-After that connect ur device via USB to your PC
-choose the Stock Rom from Odin "DISABLE or UNCHECK REPARTITION"and and flash your device it'll take like 3mins or less to flash on SGS3
Click to expand...
Click to collapse
This advice does not really help in my view .
Why factory reset then flash via Odin = wipe twice .
Odin does not have a stock rom . That may confuse the OP . >?> Its flash a stock rom via Odin .
jje
In my opinion the best option to restore stock firmware (and partition layout) is flashing three-file firmware by Odin with repartition option (and of course mx.pit). It will make all needed wipes after flash in recovery after selfreboot. All needed commands are set in executable script which is running after flashing. After that you may flash newest firmware by FOTA, Kies or Odin, as you wish.
All you need is download a correct for Your location version with separate PDA, CSC and MODEM and mx.pit.
Of course there is always a danger related to repartition so You need to do it with caution.
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
watsa said:
tried factory reset?
Click to expand...
Click to collapse
zoot1 said:
First step would be to do a full wipe I.e. data+cache+dalvik..if it does not work..then wipe system partition..be careful as this step will erase everything from your internal memory..
PS. Coming from leaked jb..install stock ics first via odin..reboot check if wifi works..if yes then go ahead and flash aosp based roms.. otherwise you might face wifi issues..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
ultramag69 said:
You DON'T need to flash the pit file unless you've somehow screwed up your partitions and have corrupted them. Flashing a pit file is one of the fastest ways to brick your phone if you don't know what you're doing and use the wrong one...
Just put the full stock update file in PDA and flash as it has the pit repartition in the file already. However, DON'T tick the repartition box...
Click to expand...
Click to collapse
tryied a factory reset and now restoring another rom to see if it works... the main issue is that it keep at the samsung logo after reboot. ok JB, any attempt of put the ccw makes the phone stuck on the boop on a vibrate loop (1 long/3 shorts)
Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
hon84 said:
Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
Click to expand...
Click to collapse
Pull the battery, go in recovery and do a data factory reset, clear the cache and reboot. That should fix it
gee2012 said:
Pull the battery, go in recovery and do a data factory reset, clear the cache and reboot. That should fix it
Click to expand...
Click to collapse
hi, I have tried it but its still doin it, any other idea??
hon84 said:
hi, I have tried it but its still doin it, any other idea??
Click to expand...
Click to collapse
Go to recovery mode
Wipe data / Wipe cache / Wipe dalevik cache
When finished, remove the battery to power-off the phone.
Launch ODIN on your computer and flash your full firmware (the lastest available for your phone).
Don't boot your phone between wipe and flash. When you push the battery on the phone, turn it directly in Download mode.
To finish, go to recovery mode and wipe data
It will remove all files for sure. I have similar issue with my I9300 : wipe data / wipe cache from recovery doesn't remove Clockwork mode and SuperSu !
lelinuxien52 said:
Go to recovery mode
Wipe data / Wipe cache / Wipe dalevik cache
When finished, remove the battery to power-off the phone.
Launch ODIN on your computer and flash your full firmware (the lastest available for your phone).
Don't boot your phone between wipe and flash. When you push the battery on the phone, turn it directly in Download mode.
To finish, go to recovery mode and wipe data
It will remove all files for sure. I have similar issue with my I9300 : wipe data / wipe cache from recovery doesn't remove Clockwork mode and SuperSu !
Click to expand...
Click to collapse
Hi, I have done the steps you have listed but this the same
hon84 said:
Hi, I have done the steps you have listed but this the same
Click to expand...
Click to collapse
Oupss. Can you give us information reported by *#1234# on dialer ? Perhaps a CSC <unknow> issue.
Have you tried flashing CF root and enter recovery and format the phone .
Outside of that it looks like a JTag repair or service centre repair .
jje
lelinuxien52 said:
Oupss. Can you give us information reported by *#1234# on dialer ? Perhaps a CSC <unknow> issue.
Click to expand...
Click to collapse
ap i9300xxalf6
cp i9300nelf1
csc i9300h3galf1
Factory Reset
Pull the battery, and do a factory reset in recovery.
hon84 said:
Hi guys I have a problem with my phone as it wouldn't switch off, it will just restart itself, it started happening after I unrooted my phone, I am on Three network, I installed it back to the stock firmwire I9300XXALF6_I9300H3GALF1_I9300NELF1_HOME.tar.md5, any ideas please
Click to expand...
Click to collapse
It must be a software issue mate as i was on the same software and might just kept rebooting too but since i've been installing the Jelly Bean Leaked Roms i aint had any problems
Hi,
I was previously on leaked firmware XXELK4(4.1.2) and then I flashed XXDLJ5(4.1.1) On top of that and now my phone doesnt start. it is stuck at samsung logo. Some one please tell me how to fix this please
can you get in to recovery then factory reset it if that don't work re flash 4.1.2 with odin
got-petrol said:
can you get in to recovery then factory reset it if that don't work re flash 4.1.2 with odin
Click to expand...
Click to collapse
I presume you have tried taking the battery out and outting it back in again,
If you can get into recovery, wipe data, wipe dalvik cache and cache.
If you cannot get into recovery, flash cf-root first. After that, enter to recovery. Wipe all and format system. Flash dlj5 again with ODIN.
Greetings.
thanks guys ! I did wipedata/factory reset and it got solved
I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
The same happened to me i advice you to unbrick using ODIN
Jahaifu said:
I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
Click to expand...
Click to collapse
if you have custom rom or stock rom coocked the kies cant help you.
do these solutions in order :
>>>solution 1 : in recovery do facotry reset and install rom , wip cache and dalvick. the first boot take time. so wait. if not worck try to format system before flashing rom.
>>>solution 2 : factory reset in recovery then install stock firemware by odin after flash is complete enter to recovery and do factory reset again. the first boot take time. so wait.
>>>solution 3 (danger, do it only if you give up if you dont have any other solution) : flash stock firmeware with odin but cheek nand erase all in odin, after flash is complete enter to recovery and do factory reset(compulsory).the first boot take time. so wait.
use latest odin version.
good luck.