Related
I am trying to upgrade my samsung galaxy S with kies.
But it stuck when "preparing firmware upgrade components..."
after that nothing happends for hours.
Can someone help me with this?
Kies Mini is junk, IMO. I recommend scouring the forums for your preferred update files (PIT, TAR, and the proper Odin version).
Also, if you want help with this you'll need to post more information -- like your model of phone, carrier, etc.
Seriously, I've been using Odin 3 v1.85 with a lot of success. I had quite a bit of trouble with all the "one-key" rooting programs, tried Odin and got everything working the first time... Well... the first time after switching out my cable. (don't use the stock USB cable for flashing. Pop the extra cash for a decent name brand cable)
Also, don't freak out if you can't get the phone working properly after messing it up with Kies. As long as you can get the "download mode" up and running, you should be able to flash with Odin and fix everything.
ii Candor ii said:
Kies Mini is junk, IMO. I recommend scouring the forums for your preferred update files (PIT, TAR, and the proper Odin version).
Also, if you want help with this you'll need to post more information -- like your model of phone, carrier, etc.
Click to expand...
Click to collapse
I like to update with KIES because I need to put the phone on service so I need original ROM.
First I uploaded android 2.1 from samfirmware and can't upgdare, after I put android 2.2 and it is the same.. even If I use spooffw program.
Phone is Samsung galaxy S and I need version of program with MOT.
I tryed to upgrade in 2 computers but always is the same
"preparing firmware upgrade components..."
after that nothing happends
what if you try updating to 2.3.3 and then use spoof fw to set it to MOT?
I took a look at samfirmware, i'm not sure if there's the right version.
did you make a backup of your stock rom, after having rooted?
geri.st said:
what if you try updating to 2.3.3 and then use spoof fw to set it to MOT?
I took a look at samfirmware, i'm not sure if there's the right version.
did you make a backup of your stock rom, after having rooted?
Click to expand...
Click to collapse
I am almost soure that samfirmware doesn't have right version.
I didn't make backup. My friend have the same phone can I backup his ROM and restore on my phone?
I use spooffw and already set it to MOT but stil can't upgrade.
does he have a stock phone? nothing done yet? which android version!
if it is below or equal 2.2.1 u should be able to root it with superoneclick http://forum.xda-developers.com/showthread.php?t=803682
then you can install rom manager from market, make a backup of his rom, and restore it on your phone.
i think this could work
I think it is below 2.2.1
I will check and try.
Is there a way that people see on service that I have rooted my phone before?
If you manage to unroot it and flash stock kernel and rom...which your friend should have, they won't!
Sent from my GT-I9000 using XDA App
geri.st said:
If you manage to unroot it and flash stock kernel and rom...which your friend should have, they won't!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
What about some counter which count installed ROMS
Never heard about that before.
maybe. You should google that
Sent from my GT-I9000 using XDA App
it exist only on sgs2 but it's easy to reset using the USB dongle.
To counter-act the counter, look on Ebay for a Samsung Galaxy "Jig". Make sure your model is specifically supported. It will reset the ROM counter to 0 and put the phone into download mode. (And it will restore almost any kind of bricked Galaxy S)
Please board members, correct me if I'm wrong, but using Odin vs Kies doesn't affect the ROM install. That is to say, a tech looking at the phone's data files couldn't tell if it was Odin or Kies that was used for the flash.
Look up your exact phone in the forums, go to the development subsection, look for a subject heading that says "[Odin]" and "[Stock]" that doesn't also have other ROM modifications such as "[rooted]" or [ext4].
So I tried updating my phone through KIES since I knew 2.3.5 was available for my phone, and it failed to update, so I tried to go into recovery mode, but I don't get that far, I only get to a screen where it shows a mobile phone and a computer wired together and the wire has a warning sign (like if it has no connection to a PC).
The phone is bought through Telenor in Sweden, if it needs a new firmware or something, can I get some directions?
Loyen_ said:
So I tried updating my phone through KIES since I knew 2.3.5 was available for my phone, and it failed to update,
Tried the Kies firmware recovery .
so I tried to go into recovery mode, but I don't get that far, I only get to a screen where it shows a mobile phone and a computer wired together and the wire has a warning sign (like if it has no connection to a PC).
The phone is bought through Telenor in Sweden, if it needs a new firmware or something, can I get some directions?
Two choices one return it to a service centre
second if you can get into download mode you can flash a stock samsung rom /
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
JJEgan said:
Loyen_ said:
So I tried updating my phone through KIES since I knew 2.3.5 was available for my phone, and it failed to update,
Tried the Kies firmware recovery .
so I tried to go into recovery mode, but I don't get that far, I only get to a screen where it shows a mobile phone and a computer wired together and the wire has a warning sign (like if it has no connection to a PC).
The phone is bought through Telenor in Sweden, if it needs a new firmware or something, can I get some directions?
Two choices one return it to a service centre
second if you can get into download mode you can flash a stock samsung rom /
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Since it's only 2 weeks old and I can't survive without a phone, I want to give it a try to do it myself (since I guess this is exactly what they will do themselves anyways, right?)
Any help finding the right one? I checked http://forum.xda-developers.com/showthread.php?t=1113928 and didn't find Sweden under "Telenor", but found Norway. Not sure if there is a "Nordic" version.
Found I9100XWKI4 on samfirmware.com, which I guess is I9100 (Galaxy S II) XW (Swedish) KI4 (2.3.4) http://hotfile.com/dl/130670448/ecd9926/I9100XWKI4_I9100XXKI1_I9100DBTKH1.rar.html
Which is the right version for me I believe, correct if wrong, now what should I do with the finished file? I've learnt that I should use ODIN and make my phone go into download mode, however, the rest is quite "what?" for me.
Click to expand...
Click to collapse
Same thing happened to me!
I would recommend just flashing CM7 or other custom ROMS, now that you're going to have to mess around.
Download lightning ROM + ODIN (it's in the same thread), flash it, should work fine, and you also have a rooted phone. From there on, try things out, before deciding to go back to samsung official Roms.
My experience with the HD2, is that "support" for custom Roms seems to be way better (and Kies sucks!)
Hope you're lucky and everything works out.
Just don't get nervous
(PS: Download mode is vol down+home+power)
Loyen_ said:
JJEgan said:
Since it's only 2 weeks old and I can't survive without a phone, I want to give it a try to do it myself (since I guess this is exactly what they will do themselves anyways, right?)
Any help finding the right one? I checked http://forum.xda-developers.com/showthread.php?t=1113928 and didn't find Sweden under "Telenor", but found Norway. Not sure if there is a "Nordic" version.
Found I9100XWKI4 on samfirmware.com, which I guess is I9100 (Galaxy S II) XW (Swedish) KI4 (2.3.4) http://hotfile.com/dl/130670448/ecd9926/I9100XWKI4_I9100XXKI1_I9100DBTKH1.rar.html
Which is the right version for me I believe, correct if wrong, now what should I do with the finished file? I've learnt that I should use ODIN and make my phone go into download mode, however, the rest is quite "what?" for me.
Click to expand...
Click to collapse
Mate you can find XWKI4 here from the link JJEgan gave you and it comes with full instructions also.Easier than that you wont find
Click to expand...
Click to collapse
Downloded the STOCK KERNEL and it contained Kernel_I9100XWKI4.exe (which I extracted which gave me Kernel_I9100XWKI4.tar), should I put this in PDA in ODIN and just press "Start"?
Also, how long time would you estimate it to take?
[EDIT]: checked the italian video in that thread and downloaded XWKI4 OXX MultiCSC (http://forum.xda-developers.com/showthread.php?t=1075278) and then I do as he and put that in the PDA slot in odin and press start, now let's see if anything happens.
IT WORKED, THANK YOU GUYS!
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Bump I really, really need this. I won't be able to update for weeks or a month if not.
also, when Kies recognizes it (1 in 1000 times) it says "Your device does not support software upgrading via Kies". I am unrooted and on stock rom.
http://forum.xda-developers.com/showthread.php?t=1763634 first link in post #5 unzip and place in pda slot in odin
or you could just root your phone and flash an ICS rom
XDA is no longer worth my time.
TimOster said:
OK, try Kies one more time. FIRST uninstall and reinstall the Samsung Mobile Device Driver. Just to be sure since you seem to be having connection problems.
Then...
Put Note into Download mode with no USB connected.
Start Kies (must be latest version ....12064_9...)
Plug in the USB (Note and PC)
Select > Tools > Firmware Upgrade and Initialization
THIS WIPES YOUR PHONE! But when it completes you are at the latest FW, currently ICS. It WILL do it even if Kies never says it connected first. I did this with my soft bricked Note that wouldn't boot completely.
Click to expand...
Click to collapse
Fixed, had tried that 10 times, but tried on another computer and it worked.
Also, now how to root and keep stock? Pref. A stock kernel. Or rerouted kernel. Or the easiest way
Is there a light at the end of the tunnel for me?
Buddy39914 said:
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Click to expand...
Click to collapse
I have been trying to outsmart Samsung Kies since the update came out. I could not wait, like many of you guys, and decided to try out some custom ROMs, so I was not allowed to download the update because of the firmware message. I've downgraded to stock Gingerbread ROM, reset the binary flash counter, and wiped all the data on my phone, yet it is not enough.
When i did the *#1234# thing, I got PDA: I717UCLA1 (which was the same code as my CSC before I reset the flash counter), Phone: I717UCLC5 (the last ROM I was on), and CSC: I717ATTLA1 (what I think I need them all to be).
Since there has only been one official firmware version, 2.3.6, aside from the ICS I want, I can't make my phone think I have only been on stock firmware for the past two flashes. I'm totally screwed unless someone makes the Kies version flash-able through ODIN or tells me I'm an idiot and hands me the solution to cracking Kies on a silver platter!
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
You guys know how much easier it would have been to just to flash clockwork recovery mod right? You could download and flash roms without a computer or USB cord all day.
Sent from my SAMSUNG-SGH-I717 using xda premium
Buddy39914 said:
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
Click to expand...
Click to collapse
I'm on a Mac and when i click on Tools, i get this: Emergency firmware recovery, Firmware upgrade settings, and Install driver
When i go to Firmware upgrade settings, i see a blank box. I feel like the Kies update itself didn't work properly because it goes to 100%, asks for my computer password, then just freezes there until i click cancel at the bottom.
Help.
I went to software update and there is a 197mb update on my phone then i started to download and it downloaded just fine but after rebooting it is failed always at 12% and meesage comes up " update through kies or contact samsung"... on kies there is no update.
My phone is not rooted.S II I9100 from KSA.
anyone?
This is what exactly going on
http://www.youtube.com/watch?v=gHkU_57zmlM&feature=player_embedded
Assuming you're running stock & have never messed with (rooted/run non stock firmware) the phone, try a factory reset/wipe in the first instance (boot into recovery), then try the update again.
You could flash a stock ICS rom manually with Odin, but be aware if you bork it in the process (very unlikely/small risk, but still a risk nonetheless), you'll likely not get it fixed under warranty. Get the PC version of Checkfus if you want to go down this route (search for it on here/Google), this will enable you to download the update manually, then flash it following the instructions here.
Ton need at least 40% to install an update.
MistahBungle said:
Assuming you're running stock & have never messed with (rooted/run non stock firmware) the phone, try a factory reset/wipe in the first instance (boot into recovery), then try the update again.
Click to expand...
Click to collapse
actually i have rooted my phone before 2 months but now it is not rooted... i just want to install official ICS using kies or through OTA ...don't want to root again.
Then take your pick. Do the reset & try it again (make sure you've got at least 40% battery; I think that's what JT meant), or do it manually with Odin. Or try the first option, then the 2nd one.
Up to you.
Also, if you can't find the firmware you need with Checkfus, search Samfirmware or here
Edit after your edit - In that case definitely the first option. If it doesn't work & you don't want to do it manually, take it to a Samsung service centre & ask them to put the latest firmware on it for you.
MistahBungle said:
Then take your pick. Do the reset & try it again (make sure you've got at least 40% battery; I think that's what JT meant), or do it manually with Odin. Or try the first option, then the 2nd one.
Up to you.
Also, if you can't find the firmware you need with Checkfus, search Samfirmware or here
Edit after your edit - In that case definitely the first option. If it doesn't work & you don't want to do it manually, take it to a Samsung service centre & ask them to put the latest firmware on it for you.
Click to expand...
Click to collapse
Ok, after reseting there is no update available on my phone when i try to update using phone.
OK. Have you ever flashed any other stock firmware on the phone ? I have two theories about this 'upgrade' - one; if you've flashed stock firmware for other regions on your phone, there's may be some issue with the CSC (even if you're currently running correct firmware for your region) preventing you from getting OTA updates successfully. Also, the update you saw may have been not for your region, because your CSC is messed up , it may have tried to pull an update for the region whose firmware you had on the phone previously. And when you did a reset it might have somehow fixed the issue with the CSC, and there is no update for your region. Conjecture, but hard to know exactly without knowing the history of the phone & exactly what you've done it.
Two; the size of the update sounds a bit strange. I would have thought it would be bigger than 197MB. Even zipped, I have a carrier branded ICS firmware and it's huge (>700MB). That you were able to download it, yet there was nothing on Kies is really strange.
Go into settings/about phone & tell me all the details you have in there. Also tell me everything you've done with the phone since you got it so far as rooting/flashing other firmware goes (details of kernels, roms, etc). And we'll see if we can shed a bit more light on things.
And one other thing, in your last post you say there's no update on the phone, have you checked Kies again. If not, have a look.
MistahBungle said:
it may have tried to pull an update for the region whose firmware you had on the phone previously. And when you did a reset it might have somehow fixed the issue with the CSC, and there is no update for your region. Conjecture
Click to expand...
Click to collapse
This might be true
Go into settings/about phone & tell me all the details you have in there
Click to expand...
Click to collapse
.
I bought S2 from Saudi Arabia.
baseband version: I9100XXKI4
Kernal Version: 2.6.35.7-I9100JPKJ2-CL655700 [email protected] #2
GBuild Number: GINGERBREAD.JPKJ2
]Also tell me everything you've done with the phone since you got it so far as rooting/flashing other firmware goes (details of kernels, roms, etc). And we'll see if we can shed a bit more light on things.
Click to expand...
Click to collapse
I have used this guide for rooting http://androidforums.com/galaxy-s2-...t/482994-rooting-galaxy-s2-dummies-guide.html
but after trying 5 or 6 custom ROMS i just unroot my phone.
And one other thing, in your last post you say there's no update on the phone, have you checked Kies again. If not, have a look.
Click to expand...
Click to collapse
no update on kies either.
I have also used this method toinstall official stock firmware http://www.technetinfo.in/mobile/mobile-software/stock-gingerbread.html
let me quote my own message while i was having problem with CSC.
k i did factory reset and wipe all data now it doesn't show "that device doest not support software upgrading via KIES" but firmware info is totally different now, it is suppose to be (KSA) not (XSG).
Click to expand...
Click to collapse
one thing more i would like to mention here is that before rooting....KIES showing
PDA:KJ2 / PHONE:KI4: / CSC KJ1 (KSA)
now it's showing
PDA:KJ2 / PHONE:KI4: / CSC KJ1 (XSG)
Click to expand...
Click to collapse
FIXED BY CHANGING CSC CODE
OK. Given all that, then it's obviously a CSC issue. Which means either it showed an update was available for the wrong region, and now that CSC issue has been resolved. Or there is an update for your region but your CSC is messed up so it can't get the update.
I've had a look at Checkfus, and the stock rom you're currently running is the latest for Saudi Arabia (GT-I9100LKAKSA -I9100JPKJ2/I9100OJPKJ1/I9100XXKI4/I9100JPKJ2) which was released on 25/10/2011.
So I'd say that update you saw was for another region, and the factory reset you did fixed whatever issue there was. There are no updates for your region, put it that way.
Edit - Unless it's some kind of minor carrier specific update ? That could explain the relatively small size of the one you saw. I guess you could find this out by contacting your carrier.
Thanks a lot MistahBungle, i really appreciate your help.
Now i have changed my CSC code from (KSA) to (JED) and now i'm getting official update from kies. Just curious about changing CSC, is there any negative effect on my phone in future by just changing CSC code?
Given you're getting OTA updates OK, probably not. Normally if you change your CSC to a different region, you often have problems getting OTA firmware updates. If it's working for you, it's obviously fine.
MistahBungle said:
Given you're getting OTA updates OK, probably not. Normally if you change your CSC to a different region, you often have problems getting OTA firmware updates. If it's working for you, it's obviously fine.
Click to expand...
Click to collapse
not sure about OTA but on KIES it is showing my firmware info correctly, i mean i can get updates through KIES without any issues.
suppose if i want to change my CSC back to original one (KSA) then what will happen?
As long as you can get it via Kies you're set. And even if you couldn't, it's simple to download the firmware with Checkfus & flash it via Odin. That's what I'd do if I were on rooted stock, for example (but I probably wouldn't be in any event).
I don't know. Try it & find out. Yes, I'm serious. I hate stock firmware, it's rubbish, and haven't run it since the first week I got my phone. So I honestly don't know.
Hi All Below I occidentally posted in the Galxy SI900 instead of here< I got the usual replies but was grateful all the same. Maybe someone might help before I revert to stock...
Hi all, I know this has been done and dusted but I am having problems with connecting to kies after rooting. I am running standard jelly bean 4.1.2 and is an Australian GT-I9100. I installed the siyah kernal root system and now all I get on kies is "connecting" Windows 7 recognises and I can access the phone via explorer on the PC. The phone after a while comes up with a message that there is no compatible software on the PC, install kies...
I have tried all the so called fixes including formatting the internal SD and memory. The only thing I did before it stopped connecting was the root and running Triangle away (paid version). I have enabled / disabled USB debugging. The only things I haven't tried is a factory reset which I don't really want to do as I am always sceptical that the backup apps will work after to restore everything.
Any help appreciated
Click to expand...
Click to collapse
The thread is here: http://forum.xda-developers.com/showthread.php?p=45907982#post45907982
Hope someone can help...
Regards Ismael
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
jiseuo said:
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
Click to expand...
Click to collapse
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
IsmaelJones said:
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
Click to expand...
Click to collapse
Now I am not using KIES, because I use AOSP ROM (4.3 Slimbean), but in past, when i was using STOCK ROM (XWLSN, XWLSS) I used "PhilZ-cwm6 - Safe Stock Based Kernel" http://forum.xda-developers.com/showthread.php?t=1877270 to root my phone.
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
jiseuo said:
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
Click to expand...
Click to collapse
Okay had a look at this, thanks. I do have a question though, my Kernel (PDA) is XWLSH, I have downloaded the 2 files but I am wondering how to install? Do I use my CW recovery or do I have to revert back to stock? A little confusing as he dowsn't really give instructions and I am pretty much an amateur when it comes to some of these things? Also I am running JB 4.1.2 he only mentions ICS 4.0.4? Help appreciated here...
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
IsmaelJones said:
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
Click to expand...
Click to collapse
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
jiseuo said:
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
Click to expand...
Click to collapse
Hi Again, solved the problem... definitely the siyah root was the culprit. I used mobile Odin to install the stock kernel, once done checked and could connect in kies and was still rooted missing busybox only. After that I again used mobile odin to install philZ, again no problems and all seems fine now. Everything working.
Thanks a million for helping and also many thanks to mobile odin developers as this is a far better tool than most and saves connecting to the PC Odin. Also seems a lot safer...
:good: