Dear XDA MEMbers
I need help from some one here.. My problem is too long to describe however i ll try to shortish it..
My evo 3d is stuck in boat loader when switch it on it directly boots in hboot and there i get stuck because i m unable to flash ruu both ways (ZIP and USB)
this problem was initiated when i tried to flash new radio though PGMG zip from a thread on xda
http://forum.xda-developers.com/showthread.php?t=696462
after I finished S OFF successfully and installed customer rom ..
now i cannot go into recovery normally.. n if i somehow access recovery by boot command it installs every thing like normal but on rebooting the evo it comes back to hboot screen
trying flash any thing (recovery) through adb commands gives the "error parition update fail" i dont know if i bricked my device or what i m so upset. n i dont know how to proceed.. if any one please suggest me something i would really repay for it by wotsoever way,..
mani00007 said:
Dear XDA MEMbers
I need help from some one here.. My problem is too long to describe however i ll try to shortish it..
My evo 3d is stuck in boat loader when switch it on it directly boots in hboot and there i get stuck because i m unable to flash ruu both ways (ZIP and USB)
this problem was initiated when i tried to flash new radio though PGMG zip from a thread on xda
http://forum.xda-developers.com/showthread.php?t=696462
after I finished S OFF successfully and installed customer rom ..
now i cannot go into recovery normally.. n if i somehow access recovery by boot command it installs every thing like normal but on rebooting the evo it comes back to hboot screen
trying flash any thing (recovery) through adb commands gives the "error parition update fail" i dont know if i bricked my device or what i m so upset. n i dont know how to proceed.. if any one please suggest me something i would really repay for it by wotsoever way,..
Click to expand...
Click to collapse
Don't worry , your device isn't bricked. What recovery are you using and did you perform a backup before trying to install the custom ROM?
---------- Post added at 09:42 AM ---------- Previous post was at 09:33 AM ----------
mani00007 said:
Dear XDA MEMbers
I need help from some one here.. My problem is too long to describe however i ll try to shortish it..
My evo 3d is stuck in boat loader when switch it on it directly boots in hboot and there i get stuck because i m unable to flash ruu both ways (ZIP and USB)
this problem was initiated when i tried to flash new radio though PGMG zip from a thread on xda
http://forum.xda-developers.com/showthread.php?t=696462
after I finished S OFF successfully and installed customer rom ..
now i cannot go into recovery normally.. n if i somehow access recovery by boot command it installs every thing like normal but on rebooting the evo it comes back to hboot screen
trying flash any thing (recovery) through adb commands gives the "error parition update fail" i dont know if i bricked my device or what i m so upset. n i dont know how to proceed.. if any one please suggest me something i would really repay for it by wotsoever way,..
Click to expand...
Click to collapse
Also, I just realized you tried to flash a radio for a HTC EVO 4G to a HTC EVO 3D. I'm not taking credit for this(credit goes to itsloltrain) but try it. Then you should be up and running. Try this ----> http://forum.xda-developers.com/showthread.php?t=1578977
koty2012 said:
Don't worry , your device isn't bricked. What recovery are you using and did you perform a backup before trying to install the custom ROM?
---------- Post added at 09:42 AM ---------- Previous post was at 09:33 AM ----------
Also, I just realized you tried to flash a radio for a HTC EVO 4G to a HTC EVO 3D. I'm not taking credit for this(credit goes to itsloltrain) but try it. Then you should be up and running. Try this ----> http://forum.xda-developers.com/showthread.php?t=1578977
Click to expand...
Click to collapse
Thanks for the replies... Me Dumb being afraid of bricking my mobile i sent it back to my buyer almost one month ago.. upon askin him (buyer). they told me they are trying to fix it with JTAG method.. as per him now my mobile has been JTAG and still it is not working.. after JTAG they have also tried to flash RUU but it stucks half way during installation.. Now i m told that my BIOS chip of mobile needs replacement and etc etc.. i dont know if i should ask them to send it back or not.. i m so upset since i bought it new n used it for only 1 week...
Related
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Pulsewave said:
Backstory: I tried flashing android revolution for the amaze once, and it didn't work (error 1) left it alone for a bit after recovering it, went back to bulletproof and flashed faux .009 kernel, then decided to try again...
Well I'll try to make this brief, sorry if I'm posting in the wrong subforum but here goes, I tried going from bulletproof 2.5.0 to Android Revolution HD and didn't flash the superwipe .zip (lazy me). The install failed with the same error 1, only this time I can't boot back into recovery. Booting to bootloader works but when I tried going into recovery I see it pop up for maybe a fraction of a second before the phone reboots.
I've tried reflashing clockwork mod but no dice
any sort of tips you folks can give me to steer me in the right direction?
Click to expand...
Click to collapse
Not sure about the Amaze tbh, but if I had a failed flash on either of my HTC phones, I just re RUU'd.
D'oh! I forgot about that! Had to do that for my buddy's thunderbolt a few times. Lemme give that a shot and I'll report back
Edit: Worked
Edit:double post
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Bricked Htc Amaze 4g
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I can get into recovery but it wont let me flash anything.Thanks to whoever replies I really appreciate it.
lmfaoomg said:
im also having this problem, my phone keeps freezing at the startup screen when the htc logo pops up. i dont know much about this kind of stuff so i would really appreciated if anyone could guide me to what to do
the way that my phone froze like that was that i tried to flash a kernel for the Energy rom, i did installed the rom itself
http://forum.xda-developers.com/showthread.php?t=1362759 this is the rom that i wanted to use
and i flashed the kernel that was provided in the 4th post, i downloaded that file, extracted and ran the .bat file and thats how it happened
i would appreciate if anyone could help me with this
Click to expand...
Click to collapse
You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
samiaziz said:
I have a bricked HTC Amaze 4g. I had beastmod v2.20 on when i decided i wanted quick sense. After i finished it just froze on the htc startup logo. I played with it and got it into a bootloop. When i try to flash a ruu the blue bar loads up and comes back to the bootloader screen. I really appreciate it.
Click to expand...
Click to collapse
Same with you. You need to superwipe the phone and flash the ROM. After the ROM flashes, you have to flash the kernel twice.
Superwiping the phone removes all the data from the old ROM so you can install a fresh clean ROM.
If you want to install the RUU, you have to relock the bootloader first and then you can reflash the original RUU
Edit: i was misinformed
Sent from my NRGized Amaze...
via xda premium
aj_2423 said:
I dont believe u have to relock
Sent from my NRGized Amaze...
via xda premium
Click to expand...
Click to collapse
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
If the phone wont go into recovery, you have to use ADB and wipe the cache partition for it to go into recovery again. This is apparently a bug with some of recoveries posted by other devs in the development forum. You need to use fastboot.exe to wipe the cache via adb
And if... If the superwipe doesn't work due to recovery version you have try to boot in to your Bootloader run one of hasoon's tool and choose different recovery.. it did happen to me the bootloop before due to the fact the old roms like mike's rom. he doesn't update his script to support the newer recoveries and it doesn't support X's recovery, it will give you an error installation.. just try different recoveries and for sure your problem will be solved..
just make sure boot in your bootloader/H-boot then run hasoon's tool and have enough battery just to make sure...
hasoon2000 said:
To flash an official RUU, you must relock it. I've done so plenty of times lol
Sent From My HTC Amaze 4G via Someone's Room
Click to expand...
Click to collapse
Thanks for the good info Sir but i my HTC Amaze is bootloader locked and S-ON but i cannot find a RUU for T-mobile to unbrick it. Will a Ruu such as this one work?
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.550L.17DC_30.68.550L.09_release_227343_signed.exe
My HTC Amaze scans all the versions of the PH85IMG i place on the sd card but goes back to the menu when its down
any advice that could help i will appreciate!
There's a thread in the dev section that has about a dozen RUUs. I don't see how one can miss it.
Thanks for your reply but i was a little unsure and did not want to make my phone any worst than it already is.
Can you explain 1 thing thing for me please - RUU always you to flash the phone via the computer? where as PH85img.zip allows you to flash the phone via sdcard? I hope i am correct here.
but i want to know how can i flash the phone when its connected via HBoot usb cause my pc recognizes it as "Android Composite ADB Interface"
Currently this is what is on my lcd
LOCKED
RUBY PVT SHIP S-ON RL
HBOOT-1.93.0002
EMMC BOOT
MAR 15 2012
i have tried several PH85img.zip files but the phone just scans them and goes back to the menu.
Some help will be appreciated extremely.
---------- Post added at 03:40 PM ---------- Previous post was at 03:33 PM ----------
I forgot to mention it connects to the pc but when i run command adb devices this is what i get
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\rquinlan.GOSL_DOM>adb devices
List of devices attached
C:\Documents and Settings\rquinlan.GOSL_DOM>
The latest ruu would be your best option, do not put the .zip part of the name since its already there, also a ruu may be an exe or zip file, since it is a complete stock file to restore the device, what would your carrier be to be exact? Just not up to reading through everything in this thread to see if you mentioned that piece of info, if its tmobile then the very first file in the stock ruu/ota thread would be the file you need.
Sent from my iPad using Tapatalk HD
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Linkzz said:
thanks for your advice i managed to reboot the phone into recovery but heres whats strange to me the phone is in recovery with HTC on the screen thats it, the pc has recognized it as "MY HTC" in the device manager however, when i run the command adb devices this is what i get "SH218vp00163 offline". i ran the RUU file but i get error 170 usb connection.
so i am a bit lost as device manager can see the phone but the RUU file cannot and i am plugging the phone into the rear of the pc.
any ideas
Click to expand...
Click to collapse
Why are you using recovery exactly?
RUU's are to be flash via hboot, which is the very first screen you see when you go into the device's bootloader, in the case of exe files, you'll need to flash it via fastboot mode, which happens to be, correct me if I'm wrong, the very first or second option on the hboot menu.
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Linkzz said:
yes you are correct cause i just tried it with an RUU from another carrier. i found out that the phone had 2.14.531 software installed. but the RUU i was using was 1.46 and so i got a signature error 132. now i need to find a way to remove the 2.14.531 software and replace it with a lower version. can you help me here
Click to expand...
Click to collapse
What carrier are you on?
t-mobile
this is the RUU i tried and made a connection but the PH85img.zip are not working no matter how i try
RUU_Ruby_Videotron_CA_1.46.1530.1_R2_Radio_1.09.55 0L.17DC_30.68.550L.09_release_227343_signed.exe
Hi there i have a problem
I have flashed cm mod 10 on my evo after super wipe
and my phone got bricked it won,t boot to hboot tested on new battrey charged and nothing
So my phone is S-off
And it seems that my evo won,t get into the emmc mod to be repaird so any chance of getting it repaired while having s-off on your phone
Did you try removing the battery for about a minute then doing the volume down power thing to get into hboot?
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Did you try removing the battery for about a minute then doing the volume down power thing to get into hboot?
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
I Have tried it all
The hboot is bricked maybe
And my phone shows qsubs_dlload on the device manager
My phone is hard Bricekd some how
Fastboot won,t detect it and so do adb
i will hope that htc could fix it
I can,t get into the emmc recovery state because iam S-off too bad for me
Are you Cdma or Gsm? It could be that you might have flashed the wrong type of rom for your device. Well, in anycase you could check the unbrick method posted in the cdma or gsm development thread. Good luck to you.
---------- Post added at 01:25 PM ---------- Previous post was at 01:22 PM ----------
I apologize I did not read the part about fastboot and adb wont recognize your device. Did you try to install the composite adb drivers for your device? If that doesn't work then you will definetely need to send it in for repair. It sounds to me whatever you did will need a repair tech to step in.
Thanks for replaying
Any way Iam planning to send it to repair today
And Iam GSM
I have downloaded the zip files
The name started with shooter_U Wich mean GSM
I have figured out that you can't enter emmc_recover if you are s-off
So next time if my phone got repared
I will try to keep it s-on
Only root and 4ext
And I will stay on stock ron unless a super amazing in believeable Tom comes up
Sent from my ARCHOS 80G9 using xda premium
Hello every one,
I dont mean to clutter up the forum with the same question but, believe me or not i did read through tones of post.. i just got more confused maybe because i am a "total noob." In any event, let me explain my issue. i am still trying to get my head around "ROM" "Kernal" "img" etc so please bare with me.
So, i had my evo rooted the very first time about 6 months ago with CWM Revolutionary and the installed ROM was SU-3.0 or something. Than Because of a physical problem i had to replace the phone and i tried rooting again, this time around i ended up installing su-2.1 or something but it had all kind of problems it kept restarting and wat not so i decided to change it to ICS from htcevohacks. this is when it rebooted and got stuck. i tried bunch of things but since i dont know wat am i doing its not helping.. my phone has Hboot 1.50 Unlock with revolutionary on it.. thats all i know about "For sure." Everything else i am confused and Uncertain about..
So far i have tried installing the same su files but they keep abording.
From Wiki. i have tried the recovery thing.. downloading the zip files PG86IMG-twrp-shooter-1.1.1.zip PG86IMG-twrp-shooter-1.0.3.zip rename them Started in recovery and it would say failed because the orignal file is older or something like that..
i know i shouldnt have mess with this since i didnt know wat i was doing but now that i am in a mess i need help.. and if anyone can help me i wold appreciate it.. i really need.. so please.
thanks,
Dennis
Are you s-on or s-off? Also, have you tried to flash 4ext recovery.
http://forum.xda-developers.com/showthread.php?t=1561999
Imagika FTW... with Tapatalk 2
Sorry forgot to mention .. its S- On iwill check out the link thanks appreciate the reply.
4ext recovery is definetely the choice for s-on users like yourself. The problem you are having is that if you just flashing roms straight from recovery and rebooting its not going to work. The reason for that is because other than 4ext recovery, most recoveries cannot flash the kernel to the boot partition while on S-on. That's where 4ext recovery comes in. It will let you flash kernels through smart flash thats incorporated in the recovery.
Heres the Thing.. i tried looking up the link posted above about 4ext but i am fairly confused about it... could you please tell me about what should or could i do at this point?? it appears as if, 4ext is something you download and install from "market" However my phone is not turning on at all. Meaning it doesnt go pass the White HTC screen.
How exactly do i install the 4ext.. or is there a "procedure list" or a "write" i can follow.. sorry for the trouble.. i am just Overwhelmed by all the information.
Bottom line here is that.. i have a "rooted phone" S-on "unlocked" with Revolutionary.
and when i try to load any ROM files its not working (get aborded") if not it would load successfully and then when it reboots its stuck on the whit screen.
if i am missing or leaving out information please let me know if not . wat can i do to start this from scratch..
ALSO, i read some posts about dealing with "bricked" phones but it looks like i woud need a Linx operation system which i dont have.
I'm a noob myself, but I've gotten into a similar situation myself where I was rooted and took an update over the air to the new ics Rom, and also tried flashing Roms from apps, and when my phone rebooted, it didn't go past the HTC screen, I was told I would have to load a new stock ruu. Which basicaly means you have to wipe the phone and install the stock rom from new.
Sent from my PG86100 using xda app-developers app
Keep trying man...
Sent from my HTC EVO 3D X515m using xda premium
Hi folks,
I have a HTC Evo 3D from the UK bought sim free, rooted it with s-on and tried to install a rom with 4ext, got stuck in bootloop, tried clearing cache but it never worked, tried a few different roms (not the best idea) and failed loads, the back up I used successfully before stopped working and in a mad attempt to get anything working I managed to stop 4ext as the recovery and its now CWM Recovery v4.0.1.4. It doesnt boot loop it just stays on the HTC screen without doing anything else.
Is there anything I can do?
I have tried the shipped RRUs but run into an error each time, probably since I am just guessing at which I am supposed to be using, is there a way to figure it out? Or a rom/cwm way or a way of getting another backup/restore file?
Any help is very much appreciated, I shouldnt have been allowed the USB cable! lol
Thanks
Paul
ScottishPaul88 said:
Hi folks,
I have a HTC Evo 3D from the UK bought sim free, rooted it with s-on and tried to install a rom with 4ext, got stuck in bootloop, tried clearing cache but it never worked, tried a few different roms (not the best idea) and failed loads, the back up I used successfully before stopped working and in a mad attempt to get anything working I managed to stop 4ext as the recovery and its now CWM Recovery v4.0.1.4. It doesnt boot loop it just stays on the HTC screen without doing anything else.
Is there anything I can do?
I have tried the shipped RRUs but run into an error each time, probably since I am just guessing at which I am supposed to be using, is there a way to figure it out? Or a rom/cwm way or a way of getting another backup/restore file?
Any help is very much appreciated, I shouldnt have been allowed the USB cable! lol
4ext recovery is the choice for s-on users so using cwm is a bad idea. You maybe experiencing bootloops on 4ext because you may have not had smartflash enabled. S-on users cannot flash kernels through normal means through recovery like s-off users can. With smartflash this is possible. So my suggestion is to reflash 4ext through fastboot and enable it if you havn't done so and do a full wipe of your phone and reflash your rom and see if that work. As for the ruu's. You have to have your bootloader relocked to flash them. You can flash them through bootloader if they were signed by htc but if not, you will have to run the ruu exe on your pc which still ofcourse needs the bootloader to be relocked.
Click to expand...
Click to collapse
Thanks for the reply,
I'm trying to get 4ext running, I've tried fastboot flash recovery recovery.img and then boot recovery.img but all I get is the HTC screen with no recovery program now :S
Ta
Paul
Did you type the command with the exact name of your recovery file in your folder? Also do you have HTC sync installed? If so uninstall it. It will interfere with fastboot.
Jsparta26 said:
Did you type the command with the exact name of your recovery file in your folder? Also do you have HTC sync installed? If so uninstall it. It will interfere with fastboot.
Click to expand...
Click to collapse
Dont have HTC sync. I used the exact name, even using the TAB button to complete the filename
Thanks
Are you sure your bootloader is completely unlocked? Sometimes when you apply the unlock bin code the unlock screen doesn't show up with Ics. What kind of output do you get when you type the fastboot flash recovery command? There might be a clue. Well in any event I'm going to trouble shoot your problem. If you could copy and paste the input and output of your command that will help alot.
---------- Post added at 11:29 PM ---------- Previous post was at 11:15 PM ----------
Edit: let's try to get your phone back on stock and unlocking your bootloader instead. I read your post about how your having trouble flashing ruu. The first question is, is your phone branded or unbranded? Depending on either you will have to find an ruu exe file based on the region and carrier if branded. Just google it up. Next your phone will have to be in relocked state if your bootloader says unlocked. Type fastboot oem lock to relock it. Now you can run the file. Remember you must have the right on or it won't take. Remember after you unlock it again it will erase all your user data. Let me know if you succeed or not and then we can proceed from there. Oh yeah here's a link you might want to read up on about the whole ruu thing http://forum.xda-developers.com/showthread.php?t=1655832
Pretty sure its fully unlocked, I was able to run superSU, install 4ext and busybox etc.
I have got 4ext working again, the problem appears that the two recovery.img files I had tried were not the correct version for my phone, I've got the right one now and can boot into 4ext through the recovery option.
Okay, now try to flash a sense Rom like cool sense and let me know if it boots for you
Jsparta26 said:
Okay, now try to flash a sense Rom like cool sense and let me know if it boots for you
Click to expand...
Click to collapse
Yup its working I used KingCobra3D-ICS, such a great feeling to see it actually boot up for the first time in days! Thanks for all your help, not sure I will even attempt another rom, I think stick with this will be safe lol
Thanks
Paul
Hello first let me introduce myself, my problem and a solotion.
My name is Mate and my HTC Evo 3d got stuck in a bootloop with acces only to bootloader.
I know a lot of people had this problem and the solution is really simple yet can be confusing for most of new members of the XDA community.
So let's start :
Problem:
Evo 3d stuck in boot loop with only bootloader available. Most of the times faulty custom rom or custom recovery is source of this. Don't panic (yet
Solution and the things I've tried reading this forums:
Some people recommend locking back your bootloader and flashing back to RUU for your device over fastboot command ( haven't worked for me) still got the HTC logo loop thing.
I have tried flashing lots of custom recoveries. The one that started problems was the TWRP 2.4.4.0 touch recovery which has brilliant design but isn't working for me.
I tried flashing 4ext and it haven't worked I tried TWRP again and it haven't worked.
What worked was recovery-clockwork-5.0.2.0-shooteru.img which I downloaded from CWM official site.
To flash a new recovery simple put your mode in bootloader fastboot usb mode and flash it with cmd.
In command prompt enter this code: fastboot flash recovery nameofrecovery.img
Important information: recovery-clockwork-5.0.2.0-shooteru.img doesn't charge your phone in recovery mode so please charge your phone in case it doesn't work and you want to switch to another recovery.
I hope this post will help people to fix their bootloop errors. I'll edit this post later to make it more readable I'm writing this now fast just because i found the solution and want to share it with community.
Good luck
bombilakus said:
What worked was recovery-clockwork-5.0.2.0-shooteru.img which I downloaded from CWM official site.
Click to expand...
Click to collapse
Proceed with caution when using CWM recovery on the Evo 3D. Not only does USB charging not work, earlier versions of CWM are known to brick the phone if you try to format the SD card. Koush, the developer, may have that fixed in the latest release but it seems that in general CWM isn't tested as well on the Evo 3D as it is on other devices.
There are known issues with recent TWRP releases that were supposed to be fixed in the version you were using, but IMO 4EXT is the most reliable of all the recoveries available for the Evo 3D.
ramjet73
ramjet73 said:
Proceed with caution when using CWM recovery on the Evo 3D. Not only does USB charging not work, earlier versions of CWM are known to brick the phone if you try to format the SD card. Koush, the developer, may have that fixed in the latest release but it seems that in general CWM isn't tested as well on the Evo 3D as it is on other devices.
I suspect that the custom recovery wasn't the real cause of your problem and it could have been resolved using 4EXT or TWRP. BTW, there are known issues with the TWRP 2.4.4.0 version you were using that have been fixed in the current release, but IMO 4EXT is the most reliable of all the recoveries available for the Evo 3D.
ramjet73
Click to expand...
Click to collapse
Yes I'm aware of CWM problems. The thing is each tiem i flashed 4ext or TWRP recovery I got stuck again in bootloop. The problem started when I wanted to flash yoda's custom rom with TWRP. I flashed it before with CWM, 4ext without any problem.
The thing is only cwm managed to boot back into recovery from bootloader all others failed. I'll go back to 4ext agains since im not a fan of cwm because they haven't implemented usb charging on evo 3d. If someone found other custom recovery that worked please post it here
Hi mate,
I've got a problem, my friend gave his sprint evo 3d, it has a same problem.. Only bootloader available.. I was tryin a couple method, but return with no luck.. I'm gonna this method tomorrow morning since i have those files you mentioned on my pc.. So i just want to make clear that this method you shared here is only for cdma? If yes I'll give a try.. Thank you..
Sent From My ShooterU
strykerider said:
Hi mate,
I've got a problem, my friend gave his sprint evo 3d, it has a same problem.. Only bootloader available.. I was tryin a couple method, but return with no luck.. I'm gonna this method tomorrow morning since i have those files you mentioned on my pc.. So i just want to make clear that this method you shared here is only for cdma? If yes I'll give a try.. Thank you..
Sent From My ShooterU
Click to expand...
Click to collapse
Actually I'm on GSM version of the phone but I don't see reason not working for you if you use recovery for cdma version.
So what have I done in order: First I locked bootloader tried RUU and it haven't worked for me it might for you. I have tried multiple combinations of buttons. Sometimes i would get to recovery screen but it would last only for split second than i was again in a boot loop. After that I have unlocked my bootloader with HTC dev site. Flashed Cwm and it worked. If you have problems with charging your phone in bootloader there is a trick with .bat file that you insert into sdk/platform-tools folder and you run it there. It restarts your phone every 6 seconds so your phone can charge for few seconds without screen taking energy. But lets hope you don't get to that part
Im crossing fingers for you
bombilakus said:
Actually I'm on GSM version of the phone but I don't see reason not working for you if you use recovery for cdma version.
So what have I done in order: First I locked bootloader tried RUU and it haven't worked for me it might for you. I have tried multiple combinations of buttons. Sometimes i would get to recovery screen but it would last only for split second than i was again in a boot loop. After that I have unlocked my bootloader with HTC dev site. Flashed Cwm and it worked. If you have problems with charging your phone in bootloader there is a trick with .bat file that you insert into sdk/platform-tools folder and you run it there. It restarts your phone every 6 seconds so your phone can charge for few seconds without screen taking energy. But lets hope you don't get to that part
Im crossing fingers for you
Click to expand...
Click to collapse
mate,
seems like no luck, eh?
Code:
C:\Android>fastboot flash recovery recovery-clockwork-5.0.2.0-shooter.img
sending 'recovery' (4726 KB)...
OKAY [ 1.135s]
writing 'recovery'...
OKAY [ 4.551s]
finished. total time: 5.688s
any other advices?
So you managed to flash but it's still stuck in bootloop?
Have you tried locking your bootloader and flashing RUU?
could you help me please i have the same problem but my phone is relocked and s-on hboot 1.5.0007 and i try alot of things i try to unlock it didn't work also to root or flashing any thing it didn't work can any one help me please