So I decided to switch back to stock from CM9, and i flashed XXLPQ over odin as pda, and it worked fine, but didnt go past the galaxy s screen, i've tried battery pulls and clearing data/cache, flashing again, but it hasn't gone past the Galaxy S screen. Any help? I've done this before and had no problems. Halp pls
If you've got a Galaxy S2 & you're stuck on the Galaxy S screen then you've got a problem. Sounds like you've flashed the wrong firmware for your phone to me.
factory wipe in recovery then flash via odin...
Flash cwm
Format system
Flash using Odin.
Related
Hello,
I installed the CF-Kernel to my S2. After that, I installed the resurrection remix rom.
Now I wanted to install the stock firmware again, so I downloaded the stock rom, where I thought, that this is the one that my S2 had after starting it the first time.
I installed this official firmware: http://androidfirmwares.net/PhoneFirmware/Download/35
DBT seems to be the right for my german S2, and it had the number "XWLP7"
It's also a Galaxy S2 i9100. Not the G version.
Could someone please help me out? My S2 is just booting, it won't start. It's just showing the official boot screen for over 30 minutes now. Even a reinstall via odin didn't work.
Thanks a lot in advance!
when changing from a custom rom to a stock rom, it is essential to perform a wipe / factory reset. shut down the phone (if you are still booting ) and boot into recovery and do the wipes from there, format data, cache, dalvik cache and fix permissions.
Draygon said:
Hello,
I installed the CF-Kernel to my S2. After that, I installed the resurrection remix rom.
Now I wanted to install the stock firmware again, so I downloaded the stock rom, where I thought, that this is the one that my S2 had after starting it the first time.
I installed this official firmware: http://androidfirmwares.net/PhoneFirmware/Download/35
DBT seems to be the right for my german S2, and it had the number "XWLP7"
It's also a Galaxy S2 i9100. Not the G version.
Could someone please help me out? My S2 is just booting, it won't start. It's just showing the official boot screen for over 30 minutes now. Even a reinstall via odin didn't work.
Thanks a lot in advance!
Click to expand...
Click to collapse
once u go back to ur stock rom
go to recovery mode using vol up+home button+power button
once in recovery mode
do a factory reset and clear cache
it will fix ur issue
did it work?
So basically my S2 died on me randomly, but i was able to boot into recovery so i tried to restore my backup. It then said 'MD5 mismatch', I then tried to install a rom but it said installation aborted, I then booted my phone into download mode, loaded a stock rom through odin, it said successful but it won't go past the boot screen, it just hangs. I tried flashing another stock rom but the same problem occurred.
Any form of help is appreciated
OK now you flashed back to stock rom, boot into stock recovery then do a factory reset/wipe data. Be sure your not dangered by the emmc bug on 4.0.4.
Sent from my Galaxy SII
*boy*racer* said:
OK now you flashed back to stock rom, boot into stock recovery then do a factory reset/wipe data. Be sure your not dangered by the emmc bug on 4.0.4.
Sent from my Galaxy SII
Click to expand...
Click to collapse
What do i do next after wipe data?
restart ur phone lol
i've already tried wipe data, install rom or wipe data, install rom via odin but it still won't go past the boot screen
Hi there,
I have a s3 that is stuck at samsung screen , i have tried factory restore, wiped cache partition,, then tried upgrading via kies, still the same, then tried upgrading via odin with firmware from sammobile, still the same, any ideas guy?
tommytenbellies said:
Hi there,
I have a s3 that is stuck at samsung screen , i have tried factory restore, wiped cache partition,, then tried upgrading via kies, still the same, then tried upgrading via odin with firmware from sammobile, still the same, any ideas guy?
Click to expand...
Click to collapse
Last solution is to send it to service center to get it repaired.
Brick
MAybe it is just brick ?
After flashing a stock ROM with Odin, are you doing a factory reset from stock recovery before booting the phone after flashing?
I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
The same happened to me i advice you to unbrick using ODIN
Jahaifu said:
I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
Click to expand...
Click to collapse
if you have custom rom or stock rom coocked the kies cant help you.
do these solutions in order :
>>>solution 1 : in recovery do facotry reset and install rom , wip cache and dalvick. the first boot take time. so wait. if not worck try to format system before flashing rom.
>>>solution 2 : factory reset in recovery then install stock firemware by odin after flash is complete enter to recovery and do factory reset again. the first boot take time. so wait.
>>>solution 3 (danger, do it only if you give up if you dont have any other solution) : flash stock firmeware with odin but cheek nand erase all in odin, after flash is complete enter to recovery and do factory reset(compulsory).the first boot take time. so wait.
use latest odin version.
good luck.
Phone : Rooted Samsung galaxy S3 (I9300)
rom: CM 13 nightlies
problem: updated the cm nightly and now phone is stuck in bootloop.
unable to boot into recovery.
Phone is now off, but as soon as i press power button it will go back into loop.
please help!!!
Update....
I flashed cwm recovery using odin and that stopped it from looping,
but now its just stuck on the start up screen with "samsung galaxy s3..."
how can i or what do i need to flash to get back to the rom or recovery??
many thanks
Try flashing latest TWRP for i9300 via Odin, and then try to install the rom. If possible, instead of using your sd card, mount the internal storage on your pc, transfer the downloaded CM13 nightly and gapps (if you use them). Remember to wipe before flashing (data, cache, system, dalvik). If this doesn't solve your problem, try flashing a stock rom via Odin to at least get your phone working again. Good luck.
need to try and get back to the download on the phone.....
having trouble getting things to do what they should.
just taken out sd card and pulled battery, and it wont turn on.