I update 3.14 & baseband 1.22 then WCDMA network not connect.....
not update before, My Rezound WCDMA is ok
plz help me
Did you happen to factory reset from stock recovery when you upgraded your firmware? I had the same problem until I flashed stock recovery, and then factory reset, then flashed custom recovery. It didn't matter what rom I tried to flash, and until I did this I had no network. Hope it helps...
Sent from my ADR6425LVW using Tapatalk 2
kirasama1014 said:
I update 3.14 & baseband 1.22 then WCDMA network not connect.....
not update before, My Rezound WCDMA is ok
plz help me
Click to expand...
Click to collapse
make sure you put the back cover on!
JeramyEggs said:
Did you happen to factory reset from stock recovery when you upgraded your firmware? I had the same problem until I flashed stock recovery, and then factory reset, then flashed custom recovery. It didn't matter what rom I tried to flash, and until I did this I had no network. Hope it helps...
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
my rezound have single but not connect HSPA+
did you have file give me??
from Taiwan
kirasama1014 said:
my rezound have single but not connect HSPA+
did you have file give me??
from Taiwan
Click to expand...
Click to collapse
you could try lte on/off app. It will give you access to the menu that lets you select wcdma, etc.
Or get a gsm phone...
nrfitchett4 said:
you could try lte on/off app. It will give you access to the menu that lets you select wcdma, etc.
Or get a gsm phone...
Click to expand...
Click to collapse
Rezzy does have a GSM radio. But I don't think it will work with every GSM carrier. There's a thread in general/dev about it I think.
zetsumeikuro said:
Rezzy does have a GSM radio. But I don't think it will work with every GSM carrier. There's a thread in general/dev about it I think.
Click to expand...
Click to collapse
I know, but in the newest leak, those settings are hidden. The app I mentioned can still acess them.
radio.img need edit, but i cann't it...
I update baseband before, HSPA+ network is OK, but upate after, it not working.
search other manner, still not a solution.
Some people will solve this situation???
kirasama1014 said:
radio.img need edit, but i cann't it...
I update baseband before, HSPA+ network is OK, but upate after, it not working.
search other manner, still not a solution.
Some people will solve this situation???
Click to expand...
Click to collapse
might be best to get s-off, so you can revert to an older stock ROM and hboot.
nrfitchett4 said:
might be best to get s-off, so you can revert to an older stock ROM and hboot.
Click to expand...
Click to collapse
my rezound is s-off
but i restore to old system & baseband, the network is not working
so, i think about this question, who is even
Can someone please help me.......
Update 3.14 & 1.22 then WCDMA & CDMA network cann't connect....
I try to update old ver 3.11 & 0.95, but network is not respond
Who can solve it ?? plz help....
come from Taiwan
Related
So I'm running the new joelzics from virgin.
My 4g doesn't work just scans and disconnects.
I've tried flashing other roms and still same thing with 4g
My radio is showing 1.6. And ending with 1216
Pri 1.53
I've posted in a few threads but didn't get any help.
So last try here thanks.
Have you flashed the latest firmware updates yet ??? If not here's a link to freezas aio. Flash it then reflash the rom. See if that helps.
#Root-Hack_Mod*Always\
My bad lol here's the Link.
http://www.androidfilehost.com/main/EVO_3D_Developers/Freeza/PG86IMG.zip
#Root-Hack_Mod*Always\
Thank you. I flashed the firmware than the Rom but no 4g.
Could you tell me what your radio# and Pri are.
Maybe mine are looking like its updating but actually not...
Will hit thanks as soon as I can figure this out.
So my radio finally updated to 0426
Than reflashed Rom buy still no 4g.
Hope someone can help out.
I'm losing my mind.. lol
kpsingh said:
So my radio finally updated to 0426
Than reflashed Rom buy still no 4g.
Hope someone can help out.
I'm losing my mind.. lol
Click to expand...
Click to collapse
hello anyone??????
Try a full wipe and reflash. Are you on sprint's network??
#Root-Hack_Mod*Always\
I've tried that.. even ran an ruu re did the s-off thing.
And still no 4g.
It still shows virgin mobile.
Wish I knew what happened...
Well it shows virgin mobile because of the firmware update. I was asking if you were on sprint's network?? As in is that your service provider.
Also try this to see if it will help
http://forum.xda-developers.com/showthread.php?t=1153371
#Root-Hack_Mod*Always\
Did that followed all those steps and nothing. Yes I.have sprint service...
Maybe your wimax keys got screwed up. There uses to be an app called 'wimax key checker'. If that's the case then I think the only thing to do is get a replacement phone.
"We're coming from a pure power source."
I am going to go on a trip to the Cayman Islands in a little over a week and I was thinking about snagging an international VZW phone to use while I am there. Last time I went I carried a sim unlocked iPhone and it worked great by just picking up a prepaid card. I know the Rezound had the radios in the beginning but I am having a hard time figuring out how well it works and where it stands as of now thanks to updates and what not. My question is, how is the Rezound working on voice and data and if I should be looking at certain leaks for better performance? Any insight would be appreciated, and if you guys think there is a phone that will work better for me, feel free to make suggestions.
gbmitchell said:
I am going to go on a trip to the Cayman Islands in a little over a week and I was thinking about snagging an international VZW phone to use while I am there. Last time I went I carried a sim unlocked iPhone and it worked great by just picking up a prepaid card. I know the Rezound had the radios in the beginning but I am having a hard time figuring out how well it works and where it stands as of now thanks to updates and what not. My question is, how is the Rezound working on voice and data and if I should be looking at certain leaks for better performance? Any insight would be appreciated, and if you guys think there is a phone that will work better for me, feel free to make suggestions.
Click to expand...
Click to collapse
The rezound is a global phone, if you whant a easy to us eno setup needed rom for gsm, use one of mine(Rezound Miaster) , when you flash this custom rom, just pop in any Sim card and it will work, no settings or tweaks or anything needed to do. you migh thave to enter your apns depending on your carrier.
siulmagic said:
The rezound is a global phone, if you whant a easy to us eno setup needed rom for gsm, use one of mine(Rezound Miaster) , when you flash this custom rom, just pop in any Sim card and it will work, no settings or tweaks or anything needed to do. you migh thave to enter your apns depending on your carrier.
Click to expand...
Click to collapse
Thanks for the heads up. The Sense 4 rom is ICS yes?
gbmitchell said:
Thanks for the heads up. The Sense 4 rom is ICS yes?
Click to expand...
Click to collapse
Yes
Edge / hsdpa
siulmagic said:
The rezound is a global phone, if you whant a easy to us eno setup needed rom for gsm, use one of mine(Rezound Miaster) , when you flash this custom rom, just pop in any Sim card and it will work, no settings or tweaks or anything needed to do. you migh thave to enter your apns depending on your carrier.
Click to expand...
Click to collapse
When using Rezound Miaster for GSM, will I get HSDPA ??
In most of the post i've read before. Rezound were only goes as far as EDGE...
And if I want to use Rezound Miaster, I just flash it ?? no Clockwork Recovery ??
wirab_1999 said:
When using Rezound Miaster for GSM, will I get HSDPA ??
In most of the post i've read before. Rezound were only goes as far as EDGE...
And if I want to use Rezound Miaster, I just flash it ?? no Clockwork Recovery ??
Click to expand...
Click to collapse
You're gonna get HSPA+ if your network provider uses the 2100mhz frequency band (almost every global provider does). Otherwise you'll have to stick to EDGE.
And yes, you do need recovery, though it's Armon Ra that is recommended not CWM. The later still got some bugs.
Abu-7abash said:
You're gonna get HSPA+ if your network provider uses the 2100mhz frequency band (almost every global provider does). Otherwise you'll have to stick to EDGE.
And yes, you do need recovery, though it's Armon Ra that is recommended not CWM. The later still got some bugs.
Click to expand...
Click to collapse
Damn it.
siulmagic said:
The rezound is a global phone, if you whant a easy to us eno setup needed rom for gsm, use one of mine(Rezound Miaster) , when you flash this custom rom, just pop in any Sim card and it will work, no settings or tweaks or anything needed to do. you migh thave to enter your apns depending on your carrier.
Click to expand...
Click to collapse
I flashed the ICS leak the 605.10 the one that's supposed to be the OTA one. I went to the Verizon store they said it should work but they don't know since its not technically official. It should work with the 4G SIM card. Is it unlocked for any sim or can I only use it with the Verizon SIM? I just didn't wanna post a thread about this.
Thanks
ajv00 said:
I flashed the ICS leak the 605.10 the one that's supposed to be the OTA one. I went to the Verizon store they said it should work but they don't know since its not technically official. It should work with the 4G SIM card. Is it unlocked for any sim or can I only use it with the Verizon SIM? I just didn't wanna post a thread about this.
Thanks
Click to expand...
Click to collapse
Yes, the rezound is factory unlocked by default, you gotta enable gsm by either flashing a gsm rom (and be able to send texts on gsm for a change) or simply root and look for the stock gsm patch that works on that leak you're running.
Sent from my ADR6425LVW using Tapatalk 2
Abu-7abash said:
Yes, the rezound is factory unlocked by default, you gotta enable gsm by either flashing a gsm rom (and be able to send texts on gsm for a change) or simply root and look for the stock gsm patch that works on that leak you're running.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
What if I were to just switch the radios using the LTE on off app?
siulmagic said:
The rezound is a global phone, if you whant a easy to us eno setup needed rom for gsm, use one of mine(Rezound Miaster) , when you flash this custom rom, just pop in any Sim card and it will work, no settings or tweaks or anything needed to do. you migh thave to enter your apns depending on your carrier.
Click to expand...
Click to collapse
But in Sense 4, mms not working
I'm on the leak from three months ago in Afghanistan with an extended battery. Popped in a sim card from a shop on base and it works with no problem. Calls only though no data. I had to use the lte on off app to put it in gsm.
Sent from my ADR6425LVW using XDA App
Which recovery I must used ??
Hi Luis,
To use Rezound Miaster, do I use AmonRa or CWM Recovery ??
wirab_1999 said:
Hi Luis,
To use Rezound Miaster, do I use AmonRa or CWM Recovery ??
Click to expand...
Click to collapse
Use Armon, CWM still got issues
Sent from my ADR6425LVW using Tapatalk 2
"you migh thave to enter your apns depending on your carrier." this quote concerns me since I haven't heard of it before, I tried to look around but without testing not getting far. Anyway, Verizon cust, plan on flashing GSM Rom and getting prepaid SIM in Ireland. Do I need to focus on apns?
teckels said:
"you migh thave to enter your apns depending on your carrier." this quote concerns me since I haven't heard of it before, I tried to look around but without testing not getting far. Anyway, Verizon cust, plan on flashing GSM Rom and getting prepaid SIM in Ireland. Do I need to focus on apns?
Click to expand...
Click to collapse
It will probably be sent automatically by the carrier but still, it may not and you're gonna have to manually set it up.
Sent from my ADR6425LVW using Tapatalk 2
Boot Screen too long
Hi Abu,
I've flash rezound miaster [With S-ON], but currently I'm stuck at the boot screen (way too long) ??
Is S-ON the problem for this ?? or do you have any other recomendation ??
wirab_1999 said:
Hi Abu,
I've flash rezound miaster [With S-ON], but currently I'm stuck at the boot screen (way too long) ??
Is S-ON the problem for this ?? or do you have any other recomendation ??
Click to expand...
Click to collapse
You should use fastboot to flash the boot.img from the rom's zip. Search the how-to up
Sent from my ADR6425LVW using Tapatalk 2
How to update manually
Abu-7abash said:
You should use fastboot to flash the boot.img from the rom's zip. Search the how-to up
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Hi Abu,
Can I flash it from recovery... In the how to, it said to be flash manually not by recovery...
And how can I get to manual fastboot... while I have'nt pass the boot logo yet ?? should I wait much more longer ??
Last thing, Do I need to S-OFF first ?? or it can be done in S-ON ??
wirab_1999 said:
Hi Abu,
Can I flash it from recovery... In the how to, it said to be flash manually not by recovery...
And how can I get to manual fastboot... while I have'nt pass the boot logo yet ?? should I wait much more longer ??
Last thing, Do I need to S-OFF first ?? or it can be done in S-ON ??
Click to expand...
Click to collapse
If you s-off it will be much easier ssince flashing the rom after wiping will be your only step.
Sent from my ADR6425LVW using Tapatalk 2
Hello there guys , i just flashed this rom and its pretty nice , the only problem is that its working on Default CDMA and im on GSM ;/
is there anything I can do , so i can get gsm signal and data to work , with this build ?
thanks in advance :cyclops:
manybreak said:
Hello there guys , i just flashed this rom and its pretty nice , the only problem is that its working on Default CDMA and im on GSM ;/
is there anything I can do , so i can get gsm signal and data to work , with this build ?
thanks in advance :cyclops:
Click to expand...
Click to collapse
Did you flash the KDDI Radio after you flashed your rom in recovery? If you haven't, you must do that in order to get GSM radio functionality... After you have done that, dial *#*#4636#*#* and select Phone Information and switch CDMA to GSM (Auto PRL).
JustWorksTechnology said:
Did you flash the KDDI Radio after you flashed your rom in recovery? If you haven't, you must do that in order to get GSM radio functionality... After you have done that, dial *#*#4636#*#* and select Phone Information and switch CDMA to GSM (Auto PRL).
Click to expand...
Click to collapse
I havent flashed any radio , because im outside the USA and gsm works fine , so what shoudl I do ?
manybreak said:
I havent flashed any radio , because im outside the USA and gsm works fine , so what shoudl I do ?
Click to expand...
Click to collapse
Still best to flash the KDDI radio and turn on GSM using the method I told you. Try dialing *#*#4636#*#* and selecting "Phone Information" and switching it to GSM auto (PRL).
JustWorksTechnology said:
Still best to flash the KDDI radio and turn on GSM using the method I told you. Try dialing *#*#4636#*#* and selecting "Phone Information" and switching it to GSM auto (PRL).
Click to expand...
Click to collapse
Ok so let's see if i got this
1) Full wipe
2) Flash paranoid
3) Flash Gapps
4) Flash KDDI Radio
and then dialing the code and switching it to GSM Auto (PRL)
and btw , is there any differences on the KDDI radio and the one i have now ?
Thanks for the quick reply
manybreak said:
Ok so let's see if i got this
1) Full wipe
2) Flash paranoid
3) Flash Gapps
4) Flash KDDI Radio
and then dialing the code and switching it to GSM Auto (PRL)
and btw , is there any differences on the KDDI radio and the one i have now ?
Thanks for the quick reply
Click to expand...
Click to collapse
If you already flashed paranoid and gapps, try switching to gsm auto (prl) first to see if you get reception since you are outside the usa already. Also... You might have to do build.prop changes, but try that first.
JustWorksTechnology said:
If you already flashed paranoid and gapps, try switching to gsm auto (prl) first to see if you get reception since you are outside the usa already. Also... You might have to do build.prop changes, but try that first.
Click to expand...
Click to collapse
Well i already did that , and was trying the code thing before , switching to gsm auto (PRL) , and reboot nothing...tried to change the build.prop line ro.telephony.default_network=7 to ro.telephony.default_network=0 and saving it , and no gsm still :/ , so probably im gonna be trying the KDDI radio flash to see what I can get ...
if i do a nandroid backup , then do the whole process and it works..and i wanna get back to the old radio and stuff , i just have to restore my backup and im good to go , am i right ?
manybreak said:
Well i already did that , and was trying the code thing before , switching to gsm auto (PRL) , and reboot nothing...tried to change the build.prop line ro.telephony.default_network=7 to ro.telephony.default_network=0 and saving it , and no gsm still :/ , so probably im gonna be trying the KDDI radio flash to see what I can get ...
if i do a nandroid backup , then do the whole process and it works..and i wanna get back to the old radio and stuff , i just have to restore my backup and im good to go , am i right ?
Click to expand...
Click to collapse
Yes, or do an SBF back to 2.3.4... Not 2.3.5 base though, cause if you do the 2.3.5 soak sbf, your screwed out of the unlocked bootloader.
:crying:
JustWorksTechnology said:
Yes, or do an SBF back to 2.3.4... Not 2.3.5 base though, cause if you do the 2.3.5 soak sbf, your screwed out of the unlocked bootloader.
Click to expand...
Click to collapse
Hahaha trust me , 2.3.5 does not exist for me , alot of people stuck in locked bootloader , poor them :crying:
the only thing about the KDDI radio is that enables GSM/UMTS and breaks CDMA while you on it ?
manybreak said:
:crying:
Hahaha trust me , 2.3.5 does not exist for me , alot of people stuck in locked bootloader , poor them :crying:
the only thing about the KDDI radio is that enables GSM/UMTS and breaks CDMA while you on it ?
Click to expand...
Click to collapse
I don't think it does, because I don't use CDMA. I am on GSM Straight Talk myself. I think it just enables it, but if it does break it... You can easily reserve it with the sbf to 2.3.4. I am glad I knew what I was doing when I got this phone... I usually take the the ota updates but im glad i found out before I did. AHHHH the joys of an unlocked bootloader. haha
JustWorksTechnology said:
I don't think it does, because I don't use CDMA. I am on GSM Straight Talk myself. I think it just enables it, but if it does break it... You can easily reserve it with the sbf to 2.3.4. I am glad I knew what I was doing when I got this phone... I usually take the the ota updates but im glad i found out before I did. AHHHH the joys of an unlocked bootloader. haha
Click to expand...
Click to collapse
Ahh alright , yeah CDMA is no biggie for me either , but flashing to sbf to stock and then doing the process of root , unlock all over again naaa lol
Do USSD Code work well with this radio ? or the problem is just related to bootloader
are you using a cdma rom with the radio flash ?
manybreak said:
Ahh alright , yeah CDMA is no biggie for me either , but flashing to sbf to stock and then doing the process of root , unlock all over again naaa lol
Do USSD Code work well with this radio ? or the problem is just related to bootloader
are you using a cdma rom with the radio flash ?
Click to expand...
Click to collapse
I do believe so it does but I am not too entirely sure what USSC or USSD code are to be honest. All I know is it worked for my GSM Sim Card and I am happy. I am actually using a pre-edited GSM rom like CM10 right now. But I am going to peetr_'s rom soon.
JustWorksTechnology said:
I do believe so it does but I am not too entirely sure what USSC or USSD code are to be honest. All I know is it worked for my GSM Sim Card and I am happy. I am actually using a pre-edited GSM rom like CM10 right now. But I am going to peetr_'s rom soon.
Click to expand...
Click to collapse
alright then i will try the radio flash and post anything after
thanks alot for the help
Having a problem with my 4G. After I unlocked the bootloader with Team Fireball's toolkit, it was working. It stopped after I flashed a CyanogenMod Official (Nightly) ROM to it. I have tried to flash some fireball radios for it, but they won't seem to flash at all. Any ideas??
vazersecurity said:
Having a problem with my 4G. After I unlocked the bootloader with Team Fireball's toolkit, it was working. It stopped after I flashed a CyanogenMod Official (Nightly) ROM to it. I have tried to flash some fireball radios for it, but they won't seem to flash at all. Any ideas??
Click to expand...
Click to collapse
Read this post in Mdmower's thread. CM may have broken your radios. It is fixable though.
http://forum.xda-developers.com/showthread.php?p=37272046
Sent with my Dinc4G
Attempting
DavDoc said:
Read this post in Mdmower's thread. CM may have broken your radios. It is fixable though.
http://forum.xda-developers.com/showthread.php?p=37272046
Sent with my Dinc4G
Click to expand...
Click to collapse
Thanks, I will attempt to fix it and let you know how it goes.
--
I attempted he fix but it was a no-go. I still only have 3G (eHRPD) working. What could be causing this? I even went S-OFF and reflashed the stock radio again. That didn't do anything either. I have a screenshot of what the radio settings are.
Would flashing the RUU do the trick?
Sent from my Incredible 4G LTE using xda app-developers app
vazersecurity said:
Would flashing the RUU do the trick?
Sent from my Incredible 4G LTE using xda app-developers app
Click to expand...
Click to collapse
did you flash the boot image using fastboot commands, this is required if s-on or if you flash one of nitsuj's roms
Hey I'm new here. Been lurking for awhile hehe
Anyways to the point, just wanted to say how I also have the no 4G connectivity problem also. I unlocked bootloader using unlock script. and then flashed twrp recovery, then installed Venoms Viper LTE rom and then flashed the upgrade to 2.0.0. This is all I've done as far as rooting and flashing is concerned other than going back to stock to try to recover 4g usability. So I'm assuming that means I'm s-on as well. would flashing the boot image like you said help me? I have already tried replacing the SIM with a new one but that didn't help and Im not sure as to what I should try next. Not trying to hijack your post just wanted to make sure it didn't get buried and we can hopefully find a solution to our problem. Strength in numbers and all that.
By the way I had my phone since last September and then two to three weeks after ownership I went ahead and rooted it and flashed new ROM because I knew it was, well, in need lol. Haven't had 4G since then but I tweaked 3G settings so that it's usable lol.
souls1987 said:
Hey I'm new here. Been lurking for awhile hehe
Anyways to the point, just wanted to say how I also have the no 4G connectivity problem also. I unlocked bootloader using unlock script. and then flashed twrp recovery, then installed Venoms Viper LTE rom and then flashed the upgrade to 2.0.0. This is all I've done as far as rooting and flashing is concerned other than going back to stock to try to recover 4g usability. So I'm assuming that means I'm s-on as well. would flashing the boot image like you said help me? I have already tried replacing the SIM with a new one but that didn't help and Im not sure as to what I should try next. Not trying to hijack your post just wanted to make sure it didn't get buried and we can hopefully find a solution to our problem. Strength in numbers and all that.
By the way I had my phone since last September and then two to three weeks after ownership I went ahead and rooted it and flashed new ROM because I knew it was, well, in need lol. Haven't had 4G since then but I tweaked 3G settings so that it's usable lol.
Click to expand...
Click to collapse
if you flashed viper the boot image is not in the rom zip, yes you need to flash boot image it contains the kernel and wifi modules
I am S-OFF. But I tried switching my CDMA Subscription (CyanogenMod 10.1) (Settings --> Wireless & Networks - More --> Mobile Networks --> CDMA Subscriptions) from RUIM/SIM to NV. That did fix the 4G connectivity problem, but it disabled calling and texting abilities. What could this mean? And what boot IMG were you talking about?
Sent from my Incredible 4G LTE using xda app-developers app
Still no ideas? The place you said didn't work.
Sent from my ADR6410LVW using xda app-developers app
Now I have other theories. But don't know if they're right. For one, I looked up a sim card reader (https://play.google.com/store/apps/details?id=com.okata.app.simcardlist) and it says my radio is CDMA. Doesn't even mention LTE at all. Not sure, but yeah.
Sent from my ADR6410LVW using xda app-developers app
hi
i got a rezound that was s off & rott by defult & i had no problem by sim network antenna &.....{i live in asia & use gsm network}
installed this ruu http://www.androidruu.com/index.php?developer=Vigor & and my phone sim locked
please help me
any solution for problem?
kralkral said:
hi
i got a rezound that was s off & rott by defult & i had no problem by sim network antenna &.....{i live in asia & use gsm network}
installed this ruu http://www.androidruu.com/index.php?developer=Vigor & and my phone sim locked
please help me
any solution for problem?
Click to expand...
Click to collapse
well for one that is a very old set of ruu files...in my downgrade upgrade guide you will find all ruu programs and ota's all the way to the latest "Global" ruu...which is what you need for GSM...im a gsm user myself...hope it helps bud
REV3NT3CH said:
well for one that is a very old set of ruu files...in my downgrade upgrade guide you will find all ruu programs and ota's all the way to the latest "Global" ruu...which is what you need for GSM...im a gsm user myself...hope it helps bud
Click to expand...
Click to collapse
u mean i had to downgrade & upgrade again?
if i do all steps of this guide http://forum.xda-developers.com/showthread.php?t=2509770 problem will be solved?
tank u for help
kralkral said:
u mean i had to downgrade & upgrade again?
if i do all steps of this guide http://forum.xda-developers.com/showthread.php?t=2509770 problem will be solved?
tank u for help
Click to expand...
Click to collapse
Yes, if you are on GSM you need to get to 4.3.605.1 firmware or higher, and none of the RUU's at that site meet the minimum level... GSM support was not included until that software level. If you follow @REV3NT3CH's guide you will get to a current release with GSM radios.
kralkral said:
u mean i had to downgrade & upgrade again?
if i do all steps of this guide http://forum.xda-developers.com/showthread.php?t=2509770 problem will be solved?
tank u for help
Click to expand...
Click to collapse
yes thats the guide...do them all and you should be good to go bud