Related
I update 3.14 & baseband 1.22 then WCDMA network not connect.....
not update before, My Rezound WCDMA is ok
plz help me
Did you happen to factory reset from stock recovery when you upgraded your firmware? I had the same problem until I flashed stock recovery, and then factory reset, then flashed custom recovery. It didn't matter what rom I tried to flash, and until I did this I had no network. Hope it helps...
Sent from my ADR6425LVW using Tapatalk 2
kirasama1014 said:
I update 3.14 & baseband 1.22 then WCDMA network not connect.....
not update before, My Rezound WCDMA is ok
plz help me
Click to expand...
Click to collapse
make sure you put the back cover on!
JeramyEggs said:
Did you happen to factory reset from stock recovery when you upgraded your firmware? I had the same problem until I flashed stock recovery, and then factory reset, then flashed custom recovery. It didn't matter what rom I tried to flash, and until I did this I had no network. Hope it helps...
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
my rezound have single but not connect HSPA+
did you have file give me??
from Taiwan
kirasama1014 said:
my rezound have single but not connect HSPA+
did you have file give me??
from Taiwan
Click to expand...
Click to collapse
you could try lte on/off app. It will give you access to the menu that lets you select wcdma, etc.
Or get a gsm phone...
nrfitchett4 said:
you could try lte on/off app. It will give you access to the menu that lets you select wcdma, etc.
Or get a gsm phone...
Click to expand...
Click to collapse
Rezzy does have a GSM radio. But I don't think it will work with every GSM carrier. There's a thread in general/dev about it I think.
zetsumeikuro said:
Rezzy does have a GSM radio. But I don't think it will work with every GSM carrier. There's a thread in general/dev about it I think.
Click to expand...
Click to collapse
I know, but in the newest leak, those settings are hidden. The app I mentioned can still acess them.
radio.img need edit, but i cann't it...
I update baseband before, HSPA+ network is OK, but upate after, it not working.
search other manner, still not a solution.
Some people will solve this situation???
kirasama1014 said:
radio.img need edit, but i cann't it...
I update baseband before, HSPA+ network is OK, but upate after, it not working.
search other manner, still not a solution.
Some people will solve this situation???
Click to expand...
Click to collapse
might be best to get s-off, so you can revert to an older stock ROM and hboot.
nrfitchett4 said:
might be best to get s-off, so you can revert to an older stock ROM and hboot.
Click to expand...
Click to collapse
my rezound is s-off
but i restore to old system & baseband, the network is not working
so, i think about this question, who is even
Can someone please help me.......
Update 3.14 & 1.22 then WCDMA & CDMA network cann't connect....
I try to update old ver 3.11 & 0.95, but network is not respond
Who can solve it ?? plz help....
come from Taiwan
my wifi don't work on ics...
I test many roms but have the same issue...
can any one help me?
saiedbaran said:
my wifi don't work on ics...
I test many roms but have the same issue...
can any one help me?
Click to expand...
Click to collapse
have you tried fixing permissions? or tried the s4v kernel over the stock official.leaked ics rom
S-ON Device?
Wrong section?
Flashmaniac said:
S-ON Device?
Wrong section?
Click to expand...
Click to collapse
he can get around being s on by using flashimage GUI
my evo3d is s-off
and test call drop fix and update Radio but not changes
saiedbaran said:
my evo3d is s-off
and test call drop fix and update Radio but not changes
Click to expand...
Click to collapse
roll back your radio, then really flash the ics rom, and all should be well, the newer radio is recommended but not mandatory
gav-collins1983 said:
roll back your radio, then really flash the ics rom, and all should be well, the newer radio is recommended but not mandatory
Click to expand...
Click to collapse
where canfind the old radio?
what radio i should use?
saiedbaran said:
where canfind the old radio?
what radio i should use?
Click to expand...
Click to collapse
do you not remember ? where are you from ? what hboot are you ? have you downgraded your hboot ? do you know your camerea hardware revision (2*5mp or 2+5mp) ? are you s-on / off ? il try work out which is the correct radio
hboot 1.49.1107
S-off
but not sure about camera...
in the sense 4 setting write 2*5mp
saiedbaran said:
hboot 1.49.1107
S-off
but not sure about camera...
in the sense 4 setting write 2*5mp
Click to expand...
Click to collapse
what country are you from
or, http://www.filefactory.com/f/4ef0ef536face67a/ go here and find your official rom, then place it on your sd card, then open up app flash image gui, and tell it to extract the boot img from that rom, and let it reboot, let me know if that works, then hit the thanks button
why?
saiedbaran said:
why?
Click to expand...
Click to collapse
why what ?
country
saiedbaran said:
country
Click to expand...
Click to collapse
so i can makle sure the firmwares specific for your device and region
my phone from east of asia but not sure aboute witch country because I didn't buy it from htc original store
saiedbaran said:
my phone from east of asia but not sure aboute witch country because I didn't buy it from htc original store
Click to expand...
Click to collapse
that doesnt matter, where are you when wifi isnt working on the newer radio
Iran
saiedbaran said:
Iran
Click to expand...
Click to collapse
http://www.filefactory.com/file/c0a....00_10.13.9020.29_M_release_211198_signed.exe id say this is the rom you need to extract the boot img from , go here http://forum.xda-developers.com/showthread.php?t=1641466 at the bottom of the page in "useful apps" to get flashimage gui.apk
thank you for help...
i will test it ...
saiedbaran said:
thank you for help...
i will test it ...
Click to expand...
Click to collapse
hit the thanks button, no worries
Hi everyone i have a HTC m8 0p6b120 with WiFi problem, I can't turn on WiFi and Bluetooth
I buy that with that problem the seller say it's was firmware problem but I don't know.
I just s-off yesterday but I don't know what way can I follow for solve this problem can anyone help me please?
Broken WiFI (grayed out) is a common symptom of firmware that is mismatched from the ROM. Either a stock ROM or custom ROM was flashed to the device that does not match the firmware (Hboot, radio, and other modules like media, WiFi, etc.).
This also means the phone was almost certainly modded by the previous user. So hopefully they described it as such when it was sold to you. Otherwise it was dishonest and fraudulent (or at least negligent).
What hboot number show in bootloader, and what software number is shown in Settings?
Hboot 3.19
1.58.502.1
Michrlz said:
Hboot 3.19
1.58.502.1
Click to expand...
Click to collapse
Former user didn't know what they were doing and flashed a really old stock ROM that does not correspond to the firmware. 1.58 ROM goes with hboot 3.16.
What is the radio baseband number (also in Settings)?
Do you have a preference on what Android build you want to be on? Or whether stock or custom ROM?
Baseband versión
[email protected]_40.34.C35006.02_F
I wanna have lollipop firmware but I want to repair the WiFi first
Michrlz said:
Baseband versión
[email protected]_40.34.C35006.02_F
I wanna have lollipop firmware but I want to repair the WiFi first
Click to expand...
Click to collapse
Looks like you are on 4.4.4 firmware.
No need to "repair the WiFi" if you are just going to flash Lollipop firmware and a Lollipop ROM. Once you have matching firmware and ROM, WiFi will work again.
To confirm, you will be using this phone on AT&T's network?
In on 4.4.2 can u gimme links of lollipop and firmware for mid 0p6b120 My phone is unlocked in using that for other network
Michrlz said:
In on 4.4.2 can u gimme links of lollipop and firmware for mid 0p6b120 My phone is unlocked in using that for other network
Click to expand...
Click to collapse
What "other network"? What region and carrier?
For future reference, when asking for help please supply as much detail as possible. Being vague is not allow us to help you very easily.
---------- Post added at 12:28 PM ---------- Previous post was at 12:26 PM ----------
Michrlz said:
In on 4.4.2
Click to expand...
Click to collapse
Your OS (otherwise known as ROM, software, or "main version") is 4.4.2.
Your hboot and radio number indicate 4.4.4 firmware (firmware contains hboot, radio, WiFi, media modules, and others) and not to be confused with the OS/ROM.
Its the mismatch of 4.4.4 firmware and 4.4.2. ROM that is causing your WiFi issue.
I'm using that in Colombia in Togo network Ok thanks what firmware can I use I wanna lollipop can u gimme link ? Can I convert it on another mid and update it to 5.0.1?
Michrlz said:
I'm using that in Colombia in Togo network Ok thanks what firmware can I use I wanna lollipop can u gimme link ? Can I convert it on another mid and update it to 5.0.1?
Click to expand...
Click to collapse
Various ways you can do this. But my suggestion would be to change to US Developers's Edition CID (or SuperCID) than run the 3.28 Developers's Edition RUU. No need to change MID, as US Dev Ed the same MID as the AT&T version.
This will put you on a stock 5.0 ROM, with no AT&T bloatware, AT&T specific features, or disabled features. It will also mean you are "fully converted" to the Dev Edition, and will even get future Dev Edition OTA updates.
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
Then my solution is run that Ruu
http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe
And my problem will solve?
Do I need convert to sense first?
Thanks for all
Michrlz said:
Then my solution is run that Ruu
http://dl3.htc.com/application/RUU_..._2G_20.63.4196.01_release_394319_signed_2.exe
And my problem will solve?
Do I need convert to sense first?
Thanks for all
Click to expand...
Click to collapse
Yes, that is what you want. Change to SuperCID, and run the RUU, and it will be on stock Lollipop ROM with Lollipop firmware.
No need to convert to Sense if you are already on Sense. Converting to Sense is only needed if you did a full conversion to GPE.
redpoint73 said:
Yes, that is what you want. Change to SuperCID, and run the RUU, and it will be on stock Lollipop ROM with Lollipop firmware.
No need to convert to Sense if you are already on Sense. Converting to Sense is only needed if you did a full conversion to GPE.
Click to expand...
Click to collapse
No muy htc is reboting automatic and still without WiFi can i use another ROM or is hardware problem?
Michrlz said:
No muy htc is reboting automatic and still without WiFi can i use another ROM or is hardware problem?
Click to expand...
Click to collapse
Its not clear if you have tried to do what I've suggested (repeatedly now). And if so, did some step fail, or was it successful in updating you to Dev Edition Lollipop?
redpoint73 said:
Its not clear if you have tried to do what I've suggested (repeatedly now). And if so, did some step fail, or was it successful in updating you to Dev Edition Lollipop?
Click to expand...
Click to collapse
it was successful i just change it to super cid and updrage it by ruu .exe i use two ruu and same problem is rebooting automatic what i can do? thanks for all
Michrlz said:
it was successful i just change it to super cid and updrage it by ruu .exe i use two ruu and same problem is rebooting automatic what i can do? thanks for all
Click to expand...
Click to collapse
Strange. No reboot issues before you did RUU?
no, i dont had reboot issues before
and i install 1.58 rom and working without wifi
any working solution i will sell this phone
Michrlz said:
any working solution i will sell this phone
Click to expand...
Click to collapse
All I can think, is to try the AT&T 4.4.4 RUU, or even an older AT&T RUU (4.4.3 or 4.4.2).
If you are still getting random reboots, than I don't think there is much else you can do. RUU will usually solve any software issue, as its a complete factory software image.
I've been having the same issue with the Wi-Fi being greyed out. I think it's my fault, though. I got my One M8 yesterday and wanted to update to Lollipop. I might've done something wrong, and now I cannot use Wi-Fi.
Anyways, my HBOOT is 3.16.0.0000 and my RADIO is 1.16.21331831.A16G.
Should I follow the same steps mentioned above or...? I'm really new to this and I shouldn't have tried it out without researching first.
EDIT: I forgot to mention that I'm S-ON. Don't know if that helps.
Have Sprint HTC ONE M9 OPJA2 unlocked.All GSM sim cards are working.Its android version is 5.0.2 .Now i want to upgrade it to Android 5.1.1 so please help.
viky001 said:
Have Sprint HTC ONE M9 OPJA2 unlocked.All GSM sim cards are working.Its android version is 5.0.2 .Now i want to upgrade it to Android 5.1.1 so please help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
ectn said:
http://forum.xda-developers.com/sprint-one-m9/development/ruu-sprint-htc-one-m9-1-32-651-17-t3073355
Click to expand...
Click to collapse
Thanx...☺ my phone's software version is 1.32.651.30,den can i directly update wid this firmware?and after update my phone will be still remain sim unlocked or locked? plz tell me the procedure...
viky001 said:
Thanx...☺ my phone's software version is 1.32.651.30,den can i directly update wid this firmware?and after update my phone will be still remain sim unlocked or locked? plz tell me the procedure...
Click to expand...
Click to collapse
I'm not 100% sure about simunlock but mine didnt lost it after flash ruu.
Here's what I did:
- Download 0PJAIMG_Sprint_HTC_One_M9_2.11.651.19_RUU.zip
- Rename it to 0PJAIMG.zip
- Copy it to your SDcard
- Reboot into Botloader, it should prompt you to install the new firmware
ectn said:
I'm not 100% sure about simunlock but mine didnt lost it after flash ruu.
Here's what I did:
- Download 0PJAIMG_Sprint_HTC_One_M9_2.11.651.19_RUU.zip
- Rename it to 0PJAIMG.zip
- Copy it to your SDcard
- Reboot into Botloader, it should prompt you to install the new firmware
Click to expand...
Click to collapse
My phone is S-ON,so should i proceed?
viky001 said:
My phone is S-ON,so should i proceed?
Click to expand...
Click to collapse
***NOTE*** S-ON USERS, YOU MUST RELOCK BOOTLOADER TO FLASH RUU!!!
Click to expand...
Click to collapse
as I know, S-ON is safer than S-OFF when flashing something through the bootloader
ectn said:
as I know, S-ON is safer than S-OFF when flashing something through the bootloader
Click to expand...
Click to collapse
My battery is draining very fast...this is the only reason to upgrade,but i dont want to take risk.if u have any solution to extend battery life.then plz tell me..thanku
viky001 said:
My battery is draining very fast...this is the only reason to upgrade,but i dont want to take risk.if u have any solution to extend battery life.then plz tell me..thanku
Click to expand...
Click to collapse
new version seems to have better standby time
and less laggy
ectn said:
new version seems to have better standby time
and less laggy
Click to expand...
Click to collapse
Okkk...have you tested the Android 6 leak?Can i go wid it?bcoz it seems easy to install.
viky001 said:
Okkk...have you tested the Android 6 leak?Can i go wid it?bcoz it seems easy to install.
Click to expand...
Click to collapse
not yet
I'm pretty busy these days
ectn said:
as I know, S-ON is safer than S-OFF when flashing something through the bootloader
Click to expand...
Click to collapse
Plz tell me how to relock bootloader?one more thing that my phone is sim unlocked so relocking bootloader can lock the sim or it will be remain unlocked?
viky001 said:
Plz tell me how to relock bootloader?one more thing that my phone is sim unlocked so relocking bootloader can lock the sim or it will be remain unlocked?
Click to expand...
Click to collapse
??
viky001 said:
??
Click to expand...
Click to collapse
??
viky001 said:
Plz tell me how to relock bootloader?one more thing that my phone is sim unlocked so relocking bootloader can lock the sim or it will be remain unlocked?
Click to expand...
Click to collapse
- Just look around the forum, you will see a guide to unlock/relock bootloader
- I'm not sure about simunlock
Hi to everyone.
I have a HTC one M9 from Sprint with the SIM unlocked, and currently it is working with telcel (a carrier from Mexico) but i want to change the rom to the developer/unlocked rom. It is possible to do this?
As far as i know, that is not possible.
hiroprotagonist said:
As far as i know, that is not possible.
Click to expand...
Click to collapse
Well i guess i have to wait until Sprint send the updare of Marshmallow. Thank you for the reply.
Ulix980 said:
Hi to everyone.
I have a HTC one M9 from Sprint with the SIM unlocked, and currently it is working with telcel (a carrier from Mexico) but i want to change the rom to the developer/unlocked rom. It is possible to do this?
Click to expand...
Click to collapse
Yes its posible, perform S-OFF, SuperCID and flash any RUU or RUU Developer Edition and you will be done
Lussardi said:
Yes its posible, perform S-OFF, SuperCID and flash any RUU or RUU Developer Edition and you will be done
Click to expand...
Click to collapse
Does the Sprint version have the same hardware compared to the Developer/Unlocked Edition? All the tutorials I've seen are about converting the AT&T Edition since they share same hardware (eg. GSM)
rdasante said:
Does the Sprint version has the same hardware compared to the Developer/Unlocked Edition? All the tutorials I've seen are about converting the AT&T Edition since they share same hardware (eg. GSM)
Click to expand...
Click to collapse
That is the one million dolars question. I been searching and i have found only tutorials to convert the GSM version, and the problem is that the Sprint version uses CDMA. Im not sure if after install the unlocked/developer rom the 3g and 4g will work fine.
Ulix980 said:
That is the one million dolars question. I been searching and i have found only tutorials to convert the GSM version, and the problem is that the Sprint version uses CDMA. Im not sure if after install the unlocked/developer rom the 3g and 4g will work fine.
Click to expand...
Click to collapse
works! ive tested in both models M8 and M9 sprint S-OFF & SuperCID works flawless
Lussardi said:
works! ive tested in both models M8 and M9 sprint S-OFF & SuperCID works flawless
Click to expand...
Click to collapse
Really? Can you show me what have you done and what thread did you follow, because I tried fastboot flash with Sneaky zip from m9 (no carrier) thread but not successfull
climhz said:
Really? Can you show me what have you done and what thread did you follow, because I tried fastboot flash with Sneaky zip from m9 (no carrier) thread but not successfull
Click to expand...
Click to collapse
are you S-OFF and SuperCID 111111? its easy man download HTC RUU no branding and flash via
Code:
fastboot oem rebootRUU
reboot download mode and perform
Code:
fastboot oem rebootRUU
when you stay in this screen only run the HTC RUU.exe and wait to flash complete.
Lussardi said:
are you S-OFF and SuperCID 111111? its easy man download HTC RUU no branding and flash via
Code:
fastboot oem rebootRUU
reboot download mode and perform
Code:
fastboot oem rebootRUU
when you stay in this screen only run the HTC RUU.exe and wait to flash complete.
Click to expand...
Click to collapse
what thread do you follow? are you sure your phone is sprint?
Ulix980 said:
Well i guess i have to wait until Sprint send the updare of Marshmallow. Thank you for the reply.
Click to expand...
Click to collapse
i have a M9 sprint with s-off and superCID
flash firmware from the zip in this thread: http://forum.xda-developers.com/sprint-one-m9/development/sprint-m9-android-6-0-leak-t3285258
just need the firmware
then flash recovery and flash any custom rom or kernel from internal version
u will have MM and GSM work fine, not try CDMA yet
ps: for CM base, u need remove 2 first lines assets in update-script for make it flashable
climhz said:
what thread do you follow? are you sure your phone is sprint?
Click to expand...
Click to collapse
No need any thread to perform this..... Yes M9 Sprint converted to International version...
Lussardi said:
No need any thread to perform this..... Yes M9 Sprint converted to International version...
Click to expand...
Click to collapse
@Lussardi thats a little hard to take. As far as experience has taught me with sprint models, flashing international RUU often leads to bricks. Mind you, i haven't tried that on mine yet so i guess until someone confirms with proof, i am just gonna continue using the MM leak for my daily driver
hiroprotagonist said:
@Lussardi thats a little hard to take. As far as experience has taught me with sprint models, flashing international RUU often leads to bricks. Mind you, i haven't tried that on mine yet so i guess until someone confirms with proof, i am just gonna continue using the MM leak for my daily driver
Click to expand...
Click to collapse
If you Gained S-OFF and SuperCID 111111 you can flash any RUU in M9 Sprint
Lussardi said:
If you Gained S-OFF and SuperCID 111111 you can flash any RUU in M9 Sprint
Click to expand...
Click to collapse
Hmm... I will try that when i get a spare phone....
Lussardi said:
are you S-OFF and SuperCID 111111? its easy man download HTC RUU no branding and flash via
Code:
fastboot oem rebootRUU
reboot download mode and perform
Code:
fastboot oem rebootRUU
when you stay in this screen only run the HTC RUU.exe and wait to flash complete.
Click to expand...
Click to collapse
I have the exact same issue from the original post, I'm following you @Lussardi, but I don't have big skills in this envorionment. I have S-off and struggling a little with CID 11111111 because of drivers (says waiting phone) but I'll solve it, anyway, you don't have to perform a wipe of anything to install RUU (is that a clean firmware install?)? I have the TWRP, is there a way to flash Developers RUU with that recovery? Or the only way to do it is like you mention with fastboot codes?
Thanks
Edited: Finally fixed drivers problem, now my actual CID is 11111111
Visciouz said:
I have the exact same issue from the original post, I'm following you @Lussardi, but I don't have big skills in this envorionment. I have S-off and struggling a little with CID 11111111 because of drivers (says waiting phone) but I'll solve it, anyway, you don't have to perform a wipe of anything to install RUU (is that a clean firmware install?)? I have the TWRP, is there a way to flash Developers RUU with that recovery? Or the only way to do it is like you mention with fastboot codes?
Thanks
Edited: Finally fixed drivers problem, now my actual CID is 11111111
Click to expand...
Click to collapse
don´t complicate man, use HTC Android 6 Leak after that remove bloatware sprint and you will have a Fully Funtional M9 Sprint :laugh:
---------- Post added at 10:26 PM ---------- Previous post was at 10:25 PM ----------
hiroprotagonist said:
Hmm... I will try that when i get a spare phone....
Click to expand...
Click to collapse
ok
Lussardi said:
don´t complicate man, use HTC Android 6 Leak after that remove bloatware sprint and you will have a Fully Funtional M9 Sprint :laugh:
Click to expand...
Click to collapse
The thing is that my carrier (telcel) works with GSM, and I'm having troubles with mobile network (Can't navigate through Google maps because of this), I thought that removing Sprint firmware and installing the developers one, I'd be able to work with any frequency and solve that. Am I wrong?
Thanks.
Visciouz said:
The thing is that my carrier (telcel) works with GSM, and I'm having troubles with mobile network (Can't navigate through Google maps because of this), I thought that removing Sprint firmware and installing the developers one, I'd be able to work with any frequency and solve that. Am I wrong?
Thanks.
Click to expand...
Click to collapse
if you have a problem whith DATA only change your SKU ID in your device, TELCEL is same to Claro El Salvador , Google Maps works fine, no need convert your M9 Sprint to Developer Edition.... only chance your SKU ID
Lussardi said:
if you have a problem whith DATA only change your SKU ID in your device, TELCEL is same to Claro El Salvador , Google Maps works fine, no need convert your M9 Sprint to Developer Edition.... only chance your SKU ID
Click to expand...
Click to collapse
Okay, I changed the SKU ID to 21 "HTC_LA_ESN_TELCEL = 21", should I change the radio type too? Actually is at "WORLDPHONE_LTE_BOUND_CDMA = 8", I'm guessing TELCEL should be "GSM_GSM = 6".
Edit: I just turned on mobile data and it no longer shows that ugly GSM icon, now is H+, 3G or 4G