Hello everyone! I Try to port LeWa ROM for my device. But i have some problems.
I'm used this tutorial:
http://forum.xda-developers.com/showthread.php?t=1623464&page=7
But i'm using DSI_XDA kitchen. ROM starts, but...
Bug1: I have music player FC- how i can check what is the reason?
Bug2: If i rotate device, screen goes green for about 2 seconds. I read(google), that this problem exist after backporting animation from ICS. How i can fix it?
On my base i don't have this problems...
Related
Dear All,
I'm using an XT910 device mostly with the CM11 ROMs. Since a mid January there's an issue for me on CM based ROMs, namely that the fonts in music players. Special marks, umlauts like ö/ü (Hungarian or German characters in the titles) are displayed like some Chinese fonts.
I've found a post about it, but no solution yet. http://forum.xda-developers.com/showthread.php?t=2560485&page=3
I vas on the 2014.02.05 CM11 nigtly where it was working fine the last time. Then I tried nearly all further releases and the issue was present, so i restored it back from an SS backup. Now I did completely wiped the device, installed JB and started from scratch. As I installed the last working nigthly the issue appeared on that rom as well. I'm not confused with it..
Did you received reports from cases like this?
Thank You,
Best Regards,
A Newbiee
Hi to everyone,
I tried several kind of Rom 4.4.2 CM and AOSP and in all of this kind of rom i found a problem with camera that goes in FC.
The first time after install it seems work well but then some second of use goes in fc, starts to crash and device restart and this happens Always camera comes open.
I search and tried some apperently Fix but without success.
thanks
Flashing this might help you.. http://www.mediafire.com/?795s91e1b548gxa
thanks
for link.
I tried but doesn't work. I tried an orginal rom based on AOSP and on this seems work.
Now I must install a 4.1.2 to have an efficent device.
I've been on SlimSaber (SlimKat unofficial by fusionjack) and never once had this issue in quite a few months. However I've also tried 4.4 pac, beanstalk, spirit rom and probably others that I've forgotten without this problem.
To ask the obvious, you do install these roms with a full wipe right? The other thing, are you using the official aosp camera that comes with the rom? Or another app that uses the camera (e.g snapchat, instagram for example? There's a bug with the nexus 5 in which the camera will sometimes crash when using it with a third party app. I guess it's possible for this bug to filter down to our device... As I don't use any such apps I can't comment on my own experience with that. But google that issue to read more, you'll find plenty on forums about it.
Sent from a galaxy far, far away
Hi,
and thanks for the reply.
I tried OMNI rom that is based on AOSP and now la SOKP.
For now only the Omni has been the better with the camera, but this rom doesn't have the same setting of a Slim.
SOKP goes like other AOSP rom. When camera is active for some moment seems work well so moving device to see and touch the screen on photosphere it goes in FC and reboot.
Some days ago, i do this test drag the Omni rom camera on Slim. result app in fault like all rom.
Can anyone explain me why happen if android, base rom are the same?
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
frenksisco said:
Hello, I have a rooted xperia mini pro SK17i and I'm stuck to the CyanogenMod ROM 7.2.0 which seems to be the only one to work with my device.
I have written to you in the past to ask: "Why the wifi stops working if I try to install the cm-9.0.0, or 9.1.0-cm, or 10 cm-.........? ?? "
but no one has ever found a solution or the solution just did not work ...
I know from what I see in the forums that mine is a very common problem.
Now, years later, I ask again the same thing: "What should I do to install a more recent rom without losing the wifi?"
hello
Click to expand...
Click to collapse
wifi is defend by your kernel install.. try use another kernel like cm10 or cm11 and make full wipe n install your rom again.. or switch to another kernel and rom..
When I installed the cm-9.0.0 I used its kernel and I did the same with the 9.1 and the 10 ... did not work ..
But maybe I did not understand. You say, for example, if I install the 9.1 should I try Kernell of 10? Does it make sense?
Please........ :crying:
Does WiFi work on Stock ICS 0.587 firmware ?
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
frenksisco said:
I am ashamed but I do not know what it is ...
I'm no expert, I have not yet figured out a lot of things ... I'm still learning ...
I followed a guide to root my device and install the cyanogen rom.
If I look in the device info read:
Kernel: 2.6.32.9-FXP root @ ubuntu # 6
Android version: 2.3.7
This is all I know ...
Before roottare the phone I upgraded the original operating system of the phone and the wifi stopped working.
Precisely for this reason I decided to install the CyanogenMod ROM: to try to recover the wifi.
The cm 7.2.0 did it. The newer versions like 9, 9.1 did not work ....
My question is .... why??? it is obvious that it is not a hardware problem ...Because if it were so it would not work even with cm 7.2.0 ...
I'd like to update my device to the latest stable CyanogenMod rom for my device which is 9.1 ..
But I can not because the wifi stops working ... Heeeeelp!!
Click to expand...
Click to collapse
i think you ALLWAYS forget to flah the needed kernel. (& allways have this old GB kernel) so only wifi works with this.
you should make sure you following the install EXACTLY.
also cm 9.1 is old like hell. this is also no stable release. at least i wouldnt call it like that.
Look for LX (Legacy xperia) which provides cm10.1 , 10.1 (jb) & 11 (kitkat) this is far more stable. also many bugs fixed there.
cm 9(.1) is abdonned long time
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
frenksisco said:
First of all .. Thank you so much for your help.
Ok .. I'll try .. I'm just worried because in thr LegacyXperia site I see a lot of bugs in the Working / not working lists..
Click to expand...
Click to collapse
ok good luck this time all works incl. wifi (should work 100% if doing all right)
i think the best is to test a rom 1st so you can say how it fits your usage . just a few tips:
-use minimal gapps after flashing rom
-LX 10.1 has a release candidatefrom march this year its a pretty stable daily driver. dont use the 10.2 release theres nothing better..
-maybe also you can test cm11 if want, but keep in mind 19/3 is the last PMEM build which is based on old kernel, will probably deliver the stablest experience. IMO the latest release is also very good but this contains some bug like the ANDROID_OS wakeclock (need power on phone on charger to avoid this) & its still in development (so its more for dev users)
for the buglist:
CM10.1:
- maps flickering its true but fixed in CM11
- wifi gets drops sometimes .. but it work at all
- camera is not good quality/buggy bcuz of driver lacks (also no 720p video)
CM11:
- sometimes wifi a lil bit buggy but its minimal. works like a charm for me
- 720p video is working here
BOTH:
-sometimes bluetooth battery drain after using it (need reboot to fix) i not face this is issue when i send something to friend.... (works normal..)
- NO FM radio, HDMI port will not work (if you have one) & ANT+ (no drivers)
good luck for you
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
frenksisco said:
Yesterday I installed the CM11 and ... it works!!!!
The wifi works! :good:and I like the rom.:good::good: ... so ... thanks a lot bejunk!!!! thanks thanks a lot!!!!! You are a great!!
Click to expand...
Click to collapse
np bro im happy you have now good rom & working wifi
just 1 thing if you use the latest version (02/07) it has a bug that you get android os battery drain. you can solve this by:
-power off phone
-plug in into charger & wait till you see the battery logo
-power on . done
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
frenksisco said:
Thanks again! The only problems with this rom are:
- the phone takes a long time to boot. Almost two minutes ... every time ..
- When the device starts up many icons disappear and others are in different positions ... I do not know why ...
Is there a way to fix these problems? Maybe I did something wrong during the installation ...
Click to expand...
Click to collapse
There's a Q&A section for that ROM. Anyway, long boot time should be fixed in the upcoming release. The simplest way to fix disappearing icons problem is to install another launcher. Hope I've helped.
Hi,
I am learning to build android ROM and trying to build CM-11.0 for Karbonn Titanium S1 Plus (msm8610) a.k.a Phicomm C230WJA. In the last three months after lots of efforts I progressed up to getting working kernel and going past the boot animation.
Now, I am facing the following problems when running the ROM on actual device. Your help would be greatly appreciated.
Note: I am building it from source using CAF kernel, display and media.
1. After flashing, first boot gets past boot animation and only Top status bar appears. No launcher, no icons, no wallpaper nothing only Cyanogenmod's debugging icon, battery icon shows up, rest of the screen remains blank.
2. Second boot (reboot) does not get past boot animation.
3. When screen locks itself, it gets totally white. This also happens when phone is powered off and charger plugged in. I mean screen turn off issue.
4. Lock screen appears as it should be with background image and few icons etc.
Please let me know if you require anything related to above device.
Regards,
SDhi
SOLVED
Thanks.
I resolved all issues by myself.
1. Somehow CM-11.0 forced me to include (not inherit) vendor/cm/config/common_full_phone.mk file to build all CM apps.
2. White screen issue was related to Backlight. Made modification to kernel and problem has been resolved.
Regards,
Sameer Dhiman
Need help
i also want to flash my titanium s1 plus rom. can u provide instruction how to flash using ur method and give link about ur cynogen 11 rom.
suthar7777 said:
i also want to flash my titanium s1 plus rom. can u provide instruction how to flash using ur method and give link about ur cynogen 11 rom.
Click to expand...
Click to collapse
Suthar,
It is still work in progress. I am working hard to make stable kernel. This is an essential foundation part.
Regards,
SDhi
Have you made it ?
adwiit said:
Have you made it ?
Click to expand...
Click to collapse
Yes, an alpha version of CM-11.0 but I am not satisfied with the voice coming out specifically from earpiece during call. I can not understand what the person at other end is saying. He/She can hear me loud and clear. It appears there is some bug in CM-11.0 framework with dual sim phone.
To till date I have tried the followings
1. CM-11.0 voice call quality issue with earpiece only. Other things works fine except GPS.
2. CAF-4.4.4 GPS module gives kernel panic and crashes. Stock Proprietary blobs are not compatible.
3. Omnirom-4.4 does not support dual sim. Fastest ROM among the others. Trying to port dual sim support in Omni-4.4 chances of success is 1% or 2%.
4. CM-12.1 incompatible stock RIL Proprietary blobs. Same IMEI assigns to both SIM slots and SIM does not get detected.
5. Omnirom-5.1 same as CM-12.1
6. CM-13.0 build does not even start gives /.txt, /5.txt or /6.txt error and stops. CM-13.0 major bug.
7. Omnirom-6.1 unknown reason gives Kernel Panic and crashes.
Currently, giving a try to CAF-4.4.2. Let's hope for the best. I have already invested lot of time (days, nights, weeks and months) but the outcome is only failures but I have not given up. There is still hope remaining inside me.
Regards,
SDhi
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
adwiit said:
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
Click to expand...
Click to collapse
I did not publicized it because basic function not working properly (Earpiece voice quality issue).
I sent you PM, please check it.
Regards,
SDhi
adwiit said:
Thanks a lot for that. I would like to try that one. Have you posted that on the forum ?
Click to expand...
Click to collapse
Have you downloaded ?
In-Call audio issue has been fixed but I would require some time to polish the ROM before beta release.
CM-11.0 Unofficial ROM for Karbonn Titanium S1 Plus Beta version released.
http://forum.xda-developers.com/and...mm-c230wxx-t3517145/post70034757#post70034757
Hello, I have successfully ported Resurrection Remix OS v5.8.5 made for Tecno W2(Android 7.1.2) to my Itel S11 running android 6.0 but there is one bug that I wasn't able to fix which is when I record a videos with my camera the red and blue colors on the video become switched. the bug does not appear in the photos or any where else. I have tried changing all the .so files in the /system/lib directory (That I thought would relate to the camera) but no luck. Also the problem seems to occur when I port an android 7 rom. I ported AndroidOne rom(android 6.0) but the problem doesn't occur. Please help
Please anyone help I searched everywhere and tried every tutorial that I could find but I was not able to fix the problem.
Edit: I was able to fix the problem(well kinda). I installed another camera app called footej camera and every thing worked