Help i messed something up - AT&T Samsung Galaxy S II SGH-I777

ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get

Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.

You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.

Related

WiFi Help

So I was using the BeastMod ROM for a while and decided to go back and do a recovery and use the stock ROM for a while. I got everything all going back to normal with the stock ROM and got a notification about the T-Mobile Wi-Fi calling update that was available. I downloaded the update and then proceeded to install the update. When the phone reboots it pops to the Android and Triangle screen and does nothing.
Any ideas what to do to get this installed?
CStites said:
So I was using the BeastMod ROM for a while and decided to go back and do a recovery and use the stock ROM for a while. I got everything all going back to normal with the stock ROM and got a notification about the T-Mobile Wi-Fi calling update that was available. I downloaded the update and then proceeded to install the update. When the phone reboots it pops to the Android and Triangle screen and does nothing.
Any ideas what to do to get this installed?
Click to expand...
Click to collapse
You have the stock recovery installed?
You'll probably lose root by installing this update. Just so you know.
I installed the stock recovery, went through the set up of the phone like it was brand new and got a prompt to download. Downloaded, and went through install only to come up with the triangle screen upon reboot of phone. I have to pull battery and restart phone.
I realize that it is possible that losing Root is there. I am just having issues with the operation of the phone and want to run stock. I don't mind sense, my only complaint and only initial want for a new ROM was to get rid of the bloatware.
I have not followed up with the ROM and their development in the last two months or so, so do not where there are and the stability of them. I want something that isn't going to take me all day to install on my phone by trying to figure out how to install it and flashing of kernals and other things. I'd prefer to be able to download to and SD card and install the zip through recovery and that be it. Not sure if that is possible.
CStites said:
I installed the stock recovery, went through the set up of the phone like it was brand new and got a prompt to download. Downloaded, and went through install only to come up with the triangle screen upon reboot of phone. I have to pull battery and restart phone.
I realize that it is possible that losing Root is there. I am just having issues with the operation of the phone and want to run stock. I don't mind sense, my only complaint and only initial want for a new ROM was to get rid of the bloatware.
I have not followed up with the ROM and their development in the last two months or so, so do not where there are and the stability of them. I want something that isn't going to take me all day to install on my phone by trying to figure out how to install it and flashing of kernals and other things. I'd prefer to be able to download to and SD card and install the zip through recovery and that be it. Not sure if that is possible.
Click to expand...
Click to collapse
After you flashed CWM recovery, you are very much can flash Rom and theme from recovery by downloading onto your sdcard - as you so wished - with the exception of Faux's kernal
'Til now, we only have 2 kernel: Stock and Faux's and very much all the Roms are based on stock kernel, so, if you referred to avoid the hassle of using your PC - then stay with stock. You'll only need to flash it once and after that, either upgrading or changing a new rom (stock kernel based) you won't have to flash it again .
Exceptions are:
Beside one or two Roms that featured Faux's kernel (can't recalled exactly but very few - read the first post of your would-be Rom), other than that you will have to pay attention to Xboarder latest Rom - the BulletProof. It's latest version (2.2.0) feature Faux's kernel whereas older version based on stock, so, if you flash older BulletProof Version (2.1.0 and backward) you are worry-free to switches from many Roms without being near your PC to flashing kernel.
I'm strongly encouraged you to go ahead and try some Rom, they are very stable and fast. Battery hog is the thing of the past IMHO

Stock Nandroid Blown Up?

Hi all - the weirdest thing is happening to me and it is definitely something I've done but I haven't the slightest what it is.
I've got CMX right now, and I've tried to go to a couple of ICS ROMs (Task, Sonic). They flash just fine, but on the new system if the screen goes to sleep the video flickers on screen wakeup. I have tried to remedy this by flashing an ICS kernel but haven't had any luck whatsoever. So today I thought I'd go back to my Nandroid backup that I took on CWM 5.0.2.7 way back on the 1st before I rooted my tab. I was on (and prefer) TWRP so I used Odin to re-flash the original recovery, wiped everything (including format /system from the Mounts menu to wipe the ROM) and restored the backup. Everything seemed fine. But to my horror, I locked the screen and woke it up to find the same flickering!!!!
I rebooted back into recovery and flashed TWRP back on so I could restore my CMX backup and I'm back to normal again. But now I feel like I'm stuck here, and the only way I'm going to be able to fix this issue is by using Odin to flash a stock firmware package. I really don't want to have to do that if I don't have to but will if I need to of course...
The one thing I haven't been able to get an answer on is before blowing everything away is what I'm asking now...in thinking about it, I had taken the backup before flashing a bootloader to fix my "rolling recovery screen" issue. Could the cause of this type of problem be a bootloader that the ROM doesn't like, or is this a crazy assumption?
OK I'm going to bump this thread with a simple to-the-point question - hoping for an answer as I work out my theories.
For those of you who have flashed ICS and custom recovery with no "rolling/flickering" issues - are you using an unlocked bootloader?
For the bootloader you just hit the point my friend,the bootloader that we use to fix rolling recovery problem has issues with most kernels except Pershoot's HC or CM9...
For your problem you should think of grabbing the official ICS or HC(just for getting rid of screen flicker),and in addition to flashing it you should extract it's stock bootloader,make a. tar.md5 out of it and keep it for future similar problems...
Note that the bootloader can only be flashed using Odin in PC and CWM or even stock flashing using MobileOdin can't make changes to it(or recover it)
For now there is not a proper fix for that but I think the best way is to have the stock bootloader and use ROMmanager or MobileOdin for flashing(since the recovery rolls with stock bootloader)...
Yeah I flashed stock ICS and rooted yesterday. I am just going to fight through the rolling recovery for now and stick with ICS until we can do more.
Thanks for the response!
some trick:you can rename the zip files you're going to flash so that their name starts with "Z",it's then easy to navigate to them(just press vol down twice)
Yep! That works, and you can also rename files as update.zip and use that option I believe. It's time to think outside of the box a bit with regard to flashing some ROMs...thats the bottom line. i am sure there are a few devs on this site that would appreciate it if we did more of that lol!
guys im really getting the same problem now... and i dont know what to do
would you be able to help me please?

[q] help!! Note down

So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:

[Q] Rooted, but can't install custom recovery...

Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
OK, from your post it looks like you have done this before. To be sure lets go through the motions one more time.
Your device is updated to 4.4.4 NK4 the latest KitKat version. It's rooted you have supersu icon and run a root checker. First download again ( in case you got a bad download ) a copy of Philz CWM version 6.48.4 here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ use "phil'z_touch_6.48.6-hlte.tar.md5" . I like to use odin version v1.85 it's little older but very stable, here is a link https://mega.co.nz/#!oA5xzTAL!LXoVWB...ZlOMSWdRGVX6Uo now flash the .tar file with odin. Make sure you let device boot up on it's own back to the OS, do not pull the cable and boot the device yourself. Then try and boot into recovery.
If it bootloops again, I would backup all your data to the PC desktop, and then do a factory reset get back to bone stock ( that means when your in download mode it says Samsung Official status not custom ) so many times I have seen folks with an unrooted device where the bootloader still says custom and you end up with a dirty flash or worse. It may take a couple factory resets to get back to stock, it doesn't always take the first time. When I flash a custom rom and then decide to go back to stock, I flash the rom two or three times to make sure I'm bone stock.
If the factory reset doesn't work you may have to flash a new stock NK4 OS. Then root again and install the recovery. Here is my thread with all the info you need http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 , Enjoy !!!
Thanks for taking the time to give me a detailed response. Sounds like I'm gonna have to wait till Wednesday or Thursday when im off work and have some time to do this, but yeah, I was thinking maybe just a factory reset, but I'll use your links and try it one more time first. I'll let ya know. Thanks again
Do you have another link to the older Odin (1.85).the link says the file isn't there... Thanks again
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Psychotic-Cerebellum said:
Never got to test it out, but she didn't really want a custom rom anyway, just the WiFi hotspot, and I finally found a method that works, big shout out to idone for his awesome app. If anyone else is looking for WiFi hotspot without root that sees this, check out his tread in the apps and themes, for this phone. Worked like a charm. Thanks again jimzweb1. Much appreciate the reply!
Click to expand...
Click to collapse
Awesome, Ya idone is the man when it comes to enabling the mobile hotspot be careful what you click with app. I will correct that link. Thanks
Psychotic-Cerebellum said:
Ok, so I've rooted and put custom roms on numerous phones. I've been trying to put a custom recovery, twrp or cwm, whatever, on my wife's phone, but have got a wall. I know for sure, 100% that I am rooted. I tired to install twrp and cwm via their respective apps, ends up in either bootloop trying to boot into recovery (and FYI, the screen shows that a custom recovery is installed, just doesn't load into recovery and restarts). And tried both via Odin, but got the same result. Have never ran into this problem before with any of my phone's, all of the galaxy's and Galaxy Note's since the S2. Any help would be greatly appreciated. Thanks homies!
Just to add, yes I made sure double checked, triple checked that I was installing the correct recovery for the phone model. Also, she has done all the ota updates that sprint has pushed as of last week (2/9/15).
Click to expand...
Click to collapse
That's the problem Knox security is getting harder flash engineering boot loader again then try rashr in app store to flash philz

[Q] settings have stopped?

hi all its been a while since ive been on the boards because ive been running rooted stock deodexed rom. i havent flashed in a year or so but just recently my settings have stopped.
i continually have been getting this message instantly after ancelling out the message. i cannot get past the select language option. theres no escape.
I couldn't even backup my current rom. so i did a battery pull and rebooted into recovery to flash different roms. I've tried dn3 which was the last rom i had saved to my sd card, and miui7. both yielded the same results of the same message about the settings has stopped. its obvious something has went bad over time. i have done nothing but use it as a phone. no flashing or anything. is there something i need to flash in order to troubleshoot this issue? i do not have the money to obtain a replacement through assurion. also my recovery wouldnt let me restore my 1 backup on my sd card. so is there anything i can do from scratch? any settings zips to flash? Odin? ive searched boards and nothing specific to my device (I605). please help
iflip said:
hi all its been a while since ive been on the boards because ive been running rooted stock deodexed rom. i havent flashed in a year or so but just recently my settings have stopped.
i continually have been getting this message instantly after ancelling out the message. i cannot get past the select language option. theres no escape.
I couldn't even backup my current rom. so i did a battery pull and rebooted into recovery to flash different roms. I've tried dn3 which was the last rom i had saved to my sd card, and miui7. both yielded the same results of the same message about the settings has stopped. its obvious something has went bad over time. i have done nothing but use it as a phone. no flashing or anything. is there something i need to flash in order to troubleshoot this issue? i do not have the money to obtain a replacement through assurion. also my recovery wouldnt let me restore my 1 backup on my sd card. so is there anything i can do from scratch? any settings zips to flash? Odin? ive searched boards and nothing specific to my device (I605). please help
Click to expand...
Click to collapse
I'm assuming you are still on the 4.1.2 bootloader, since you were able to flash miui7 and dn3.
If something has gotten corrupted, you could try Odin'ing the stock recovery back onto the device by following the directions on this thread: http://forum.xda-developers.com/showthread.php?p=53624921
After getting the stock recovery on the device, do a factory reset and wipe cache in the stock recovery. Then you can use ODIN to reinstall CWM/Philz or TWRP (whichever recovery you were using previously). Hopefully you have an old backup you could restore... or you can set up your ROM again from the start after rebooting back into the system.
If worse comes to worst and wiping in the Stock recovery doesn't fix things...sounds like you may have to Odin back to stock 4.1.2, and then reroot with CASUAL and start over again. Droidstyle put together a good guide on how to restore the phone back to stock 4.1.2... you can find his guide here: http://forum.xda-developers.com/showthread.php?p=34891181. I think the 4.1.2 firmware link is down, but you can grab it from Sammobile.com.
You probably know... but don't flash the official Stock 4.3 or 4.4.2 Firmware onto the phone because there's no current bootloader unlock methods for those..... 4.1.2 is the last Android version for our I605's that has a "do it yourself" bootloader unlock method.

Categories

Resources