Stock Nandroid Blown Up? - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi all - the weirdest thing is happening to me and it is definitely something I've done but I haven't the slightest what it is.
I've got CMX right now, and I've tried to go to a couple of ICS ROMs (Task, Sonic). They flash just fine, but on the new system if the screen goes to sleep the video flickers on screen wakeup. I have tried to remedy this by flashing an ICS kernel but haven't had any luck whatsoever. So today I thought I'd go back to my Nandroid backup that I took on CWM 5.0.2.7 way back on the 1st before I rooted my tab. I was on (and prefer) TWRP so I used Odin to re-flash the original recovery, wiped everything (including format /system from the Mounts menu to wipe the ROM) and restored the backup. Everything seemed fine. But to my horror, I locked the screen and woke it up to find the same flickering!!!!
I rebooted back into recovery and flashed TWRP back on so I could restore my CMX backup and I'm back to normal again. But now I feel like I'm stuck here, and the only way I'm going to be able to fix this issue is by using Odin to flash a stock firmware package. I really don't want to have to do that if I don't have to but will if I need to of course...
The one thing I haven't been able to get an answer on is before blowing everything away is what I'm asking now...in thinking about it, I had taken the backup before flashing a bootloader to fix my "rolling recovery screen" issue. Could the cause of this type of problem be a bootloader that the ROM doesn't like, or is this a crazy assumption?

OK I'm going to bump this thread with a simple to-the-point question - hoping for an answer as I work out my theories.
For those of you who have flashed ICS and custom recovery with no "rolling/flickering" issues - are you using an unlocked bootloader?

For the bootloader you just hit the point my friend,the bootloader that we use to fix rolling recovery problem has issues with most kernels except Pershoot's HC or CM9...
For your problem you should think of grabbing the official ICS or HC(just for getting rid of screen flicker),and in addition to flashing it you should extract it's stock bootloader,make a. tar.md5 out of it and keep it for future similar problems...
Note that the bootloader can only be flashed using Odin in PC and CWM or even stock flashing using MobileOdin can't make changes to it(or recover it)
For now there is not a proper fix for that but I think the best way is to have the stock bootloader and use ROMmanager or MobileOdin for flashing(since the recovery rolls with stock bootloader)...

Yeah I flashed stock ICS and rooted yesterday. I am just going to fight through the rolling recovery for now and stick with ICS until we can do more.
Thanks for the response!

some trick:you can rename the zip files you're going to flash so that their name starts with "Z",it's then easy to navigate to them(just press vol down twice)

Yep! That works, and you can also rename files as update.zip and use that option I believe. It's time to think outside of the box a bit with regard to flashing some ROMs...thats the bottom line. i am sure there are a few devs on this site that would appreciate it if we did more of that lol!

guys im really getting the same problem now... and i dont know what to do
would you be able to help me please?

Related

I cannot access recovery anymore

Tuesday night I loaded CM7, and then the Market wouldn't update my apps so I decided I would restore BAMF 1.5. After doing so, the Market just gave me "Fails" trying to update, and I could not access recovery, as I was going to do a complete wipe and reflash. Most of Wednesday, an extremely helpful & knowledgable member, Mattgyver83, tried diligently to help me rectify the situation, but to no avail. We tried to Fastboot, tried flash_image, tried fix permissions...shoot, I practically wore out adb..anyway, I ended up reverting back to stock and unrooted. I used jcase's method to revert back to stock, and that was painless, and successful. I decided last night to try rooting again, thinking a fresh root would solve my issue of not being able to access recovery. Root was successful, but I still cannot access recovery, through rom manager, or through bootloader. When I attempt it my Tbolt goes to white HTC screen, and stays there. All functions of my phone now work, and all aspects of root work, except I cannot flash anything. Rom manager shows I have clockwork recovery, but I just can't get to it.
Sorry for the long ramble. If anyone has had this issue, or if anyone knows a fix, I would appreciate it. Otherwise, I wait for Gingerbread.
Thanks
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
travishamockery said:
Happened to me with CM7 builds. For some reason they were erasing the recovery. Just have to reflash the recovery in Rom Manager and you'll be all set in the future.
Click to expand...
Click to collapse
Tried that, but thanks. Still just goes to white HTC screen, and stays there until I do battery pull.
jr4000watts said:
do what i do pull batt leave out for a min, then put the batt back in and connect usb right away.
Click to expand...
Click to collapse
I can get to bootloader, just not able to get into recovery.
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
monolithic said:
I'm stabbing in the dark at this, but this did work for me with my Droid...
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Ie. Flash recovery and wait until the confirmation pop-up/message only takes a few seconds to pop up. If the message takes longer than 5 seconds or so, re-flash recovery and repeat until the confirmation comes up quickly.
This sounded retarded to me, but I was at the end of my rope so I tried it. It worked like a charm.
M.
Click to expand...
Click to collapse
Thanks, but that didn't work. I think something in my os got lost when I restored BAMF from CM7.
Yea I spent a good few hours yesterday trying to help Orio out and we attempted a ton of things to try and fix the recovery issue, this post should offer a bit more insight to the methods used, this is running off memory;
adb reboot recovery failed
Reinstall latest Rom Manager apk and Flash CWM
flash latest rom manager via fastboot (CWM only)
(fastboot flash recovery /sdcard/recovery-clockwork-3.0.2.5.img)
**did not do fastboot erase recovery first**
"return to stock safely and properly" XDAthread by jcase
return to stock image [RUU], reroot, try again
try to boot into recovery via hboot
manually installed fix_permissions.sh script and busybox on rooted stock, ran.. didnt fix
tried to see if flash_image method would work, didn't
All of the above have failed and we basically tried almost all combinations. Not once would this phone get back into recovery, even after flashing the appropriate RUUs which include either stock android or CWM recovery. The only thing we have not currently attempted which might be the last thing left is to do is manually install the nandroid.sh script and do an advanced restore of the recovery image only from a nandroid backup on SD. I would rather not go down this method as it could have an undesired result, I have done it to restore a G1 back in the day but not 100% if its gonna work on a tbolt. Thankfully his phone boots, and we can get into hboot, but yea.. pretend recovery just doesnt exist at all...
Curious if anyone has any knowledge above what we have already tried.
monolithic said:
I had a similar issue with my Droid. Someone recommended that I flash recovery multiple times before trying to reboot. The comments were basically that you need to flash recovery 3-5x until the flashing process is a mere few short seconds. Evidently that is an indication that the flash has occurred correctly.
Click to expand...
Click to collapse
I recall the same thing and its a good thought however that was mostly a generic error due to a CWM update and CM6 (I think) but either way flashing an RUU should override this shortcoming and im pretty sure that issue was worked out in CWM as well.
Not to be rude, but I don't think this question belongs in the development section.
Orio56 said:
I can get to bootloader, just not able to get into recovery.
Click to expand...
Click to collapse
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
hogowner said:
do you still have the P zip file for the radio (baseband) on your SD card? if you do....try to delete it...then hold power and volume down button down....then see if you can get into recovery....
probably not going to work...but it is worth a try......
Click to expand...
Click to collapse
Thanks, but no, I deleted that after loading it. I actually reverted back to stock/unrooted last night and rerooted and the problem still remains. It's quite strange.
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
shelooga said:
maybe i missed it if someone suggested this but what about flashing an older version of CWM?
Click to expand...
Click to collapse
That is what I was going to suggest. In ROM Manager at the very bottom try and flash an older version.
Sent from my ADR6400L using XDA Premium App
SUCCESS !!!
I fixed it !
Apparently, when I loaded up cm7, files showed up about the same time on my sdcard in clockworkmod download file. I deleted those files, and reflashed clockworkmod in rom manager, (which this time took like 3 - 4 minutes), and rebooted into recovery and it worked...did it again, just in case it was a fluke and it worked.
All is well now...the planets are realigned !!!
Thanks everyone for your ideas and especially thanks to mattgyver83 who helped me for something like 4 hours yesterday. Exceptional kindness !!
mods...you can close this thread.
GREAT NEWS!!!! CONGRATULATIONS!!
THANKS FOR REPORTING BACK!
This may help out other members with the same problem!!
now go ahead and start playing with your T-BOLT again!
That's a very odd solution. My first two things to try would have been:
1) fastboot:
fastboot erase recovery
fastboot flash recovery C:\some\local\path\recovery.img
You can't, well, probably shouldn't, flash a recovery from the /sdcard. When in fastboot mode I don't think the sdcard is even mounted. Either way, I think fastboot needs the img file on the local file system.
2) Create a PG05IMG.zip file with the recovery.img file in it, and flash that through HBOOT. Although this should have been done in some form or fashion when you downgraded or re-rooted, so YMMV.

Help i messed something up

ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Joeyjr25 said:
ok so i wouldnt say im a noob but im not as advanced as some of yous. last night i flashed a leaked ics onto my phone and loved it with one exception. i couldnt figure out how to root it. all my apps are backed up on titanium backup and i didnt want to have to get all of them manually. so i flashed back to stock using odin with a file i used back when that crappy update came out. i rooted it with super one click and and then went to put on a prerooted ics... when in recovery mode now i get this message
cant access to '/system/csc/att/system/'
i try putting on cwm and siyah and i keep getting authentication errors and the installation aborts. also recovery mode wont read my external sd card now. when the phone is booted up it works fine except i tried to do the factory ota update and it keeps failing. i tried reflashing back to stock again and did the update unrooted and it still failed.
i know you guys hate hate when people ask without researching so i did SOME forum browsing and found nothing. sorry i dont really have time to look too extensively. i just want to know how to fix it. i appreciate any help i can get
Click to expand...
Click to collapse
Start with getting back to stock using this guide. Check for ICS bootloaders too, you probably flashed them and you have to get stock ones back (careful, flashing bootloaders can cause hardbricking). Once you're back to stock and rooted, you shouldn't need to ever use PC Odin again.
Then use this guide for rooting/flashing.
One other note: when you tried to install CWM, it sounds like you loaded an update.zip onto your phone then tried to install it using stock recovery. Stock recovery won't let you install unsigned update.zips, which is why that method for getting CWM on your phone will never work (hence the authentication error and installation abort). For our phone, CWM is only included in custom kernels, that's the only way to get it on there, and don't even think about updating or changing it via other means. Just flash a custom kernel, it'll include CWM, use it until you want to switch kernels.
Hit my thanks button, I was really nice this time. And post in Q/A next time as well.
EDIT: Skip the second guide if all you want is stock. You should be able to update OTA after following the first guide. Though even if stock is what you want, I highly recommend flashing a custom GB kernel because a) they're more stable and faster and b) you'll have CWM in case you need it.
You started off mentioning about "leak ics" which I have absolutely zero experience.
My suggestion:
1. Try to get it back to stock. Make sure it works correctly.
2. If hasn't rooted yet, do so.
3. Getting CMW into the device by flashing custom kernel.
4. From there, install any ICS ROM you want.

Q: blank screen after T-Mo splash animation, possible to fix without wiping?

Hello all,
I have a question that has not been answered after many hours of searching. Hopefully I'm just dumb, and my buddy's stock firmware and data isn't hosed. I'm trying to get his stock firmware running again so I can back it up safely.
What I've done:
Tried to flash CWM's update.zip via stock recovery (signature verification failed on the three different zip's I could find in the forums and various links)
Used Heimdall to push "cmenard-T959-CWM" zImage (this worked, and I get a different screen at boot)
The phone boots to the point of the T-Mobile splash screen with the annoying shriek sound, but goes to a black screen after. If i touch any of the soft buttons, they light up and remain lit. It'll stay like that for at least 20 minutes.
Is it possible to re-flash the system partition and not the data partitions using ODIN? Is that even feasible? Like I mentioned above, I'd like to get the stock firmware running such that I can make a good backup of it with all the user data intact. I haven't been able to because the CWM+root wouldn't flash.
Any suggestions or insight would be greatly appreciated.
thanks in advance!
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Toast6977 said:
Well as long as you don't format the internal SD, any pictures and videos and things should remain intact.
Here is a similar thread. See if it resembles your issue.
http://forum.xda-developers.com/archive/index.php/t-794869.html
Click to expand...
Click to collapse
Thanks for the suggestion, Toast. I don't believe the internal SD has been messed with, and I don't plan to mess with it either. The thread you linked is not quite related to my issue, as far as I can tell.
I am able to get into Download Mode, and the Stock Recovery mode as well. However every time I try to flash an 'update.zip' with the Stock Recovery, I get an error about Signature Verification Failure.
After stepping back from it for a day, I think I've gained some clarity. Since all I've done is flash a different Kernel with Heimdall, I'm going to try to flash a stock kernel then see what happens.
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Toast6977 said:
Is this phone on stock Froyo or have you got it back to JFD (eclair)?
If Froyo, that's the problem. Using Odin back to Eclair and run update.zip. It won't work from stock Froyo.
*-*- I made some assumptions in my previous post. The shrieking sound. Black screen. Lights stay lit. Sounded like a poltergeist.
Glad you can get in download mode and recovery.
Click to expand...
Click to collapse
Woodrube said:
The old 2E vs 3E problem. Nice catch Toast
Give this a whirl: recovery 3e modified to work like recovery 2e
Might have to ABD push it to your internal SD card though.
Click to expand...
Click to collapse
hahaha poltergeist!
Wow, so I'm glad I asked. I wouldn't have known about this issue, as I do not have any history with this device.
I know that the ROM is currently 2.2, and the Android System Recovery is showing "3e".
If I understand correctly, once I'm ready to flash up to ICS, I'll need to ODIN back to 2.1 to get Android System Recovery "2e", which will let me flash 'update.zip' packages freely. Then I flash an 'update.zip' to get CWM, then flash CM7, then CM9 (and CM9 is my intended destination).
The things mentioned in the thread you linked do appear to apply to my situation.
However I still want to get the stock OS booted and working, then do a Nandroid backup of it. (it's the computer tech/security pro in me. Since I'm new to this device, I -tried- to read up on everything first, and didn't want to make a change without being sure it would work.)
Does anyone happen to know if flashing a stock kernel over the 'cmenard' kernel will harm anything, and hopefully get a successful boot? Again, I'm trying to get the stock ROM booting again in order to verify I have everything I need off of it, then do a nandroid backup. Flashing to CM9 will come afterwards.
Ok, here are some things for you.
Here is a kernel pack that you can use. Read the OP because there are Froyo AND Gingerbread kernels in there.
[KERNELS] Moped_Ryder SGS Kernel Pack v2 [20+ Froyo/GB Kernels]
I really suggest using something like BaliX 1.2 or BaliUV kernels to make your back up. They are smooth, fast and OC/UV-able. To flash just Wipe /cache, /dalvik -> flash kernel -> Wipe /cache, /dalvik (I also fix permissions too bc that is the way that I learned and I just do it that way all the time). Reboot and Bam!! you should be able to get to the point that you can make a backup.
Look in my signature, there are downloads and flashables that are direct download linked. There is also an ICS install guide that can help your journey. Once you have your backup, then use Odin from the Toolbox in my signature and flash back to stock JFD. From there you will be able to follow my guide.
If you need any files, just let me know and I will upload them when I get home (won't be until late though, i have plans right after work).
Using HB, can I choose any theme? I am not so acquainted with the Theme chooser and boot animation of my phone. I flashed a boot animation zip yesterday and it was stuck in "ANDROID" screen. So I have to flash again. I never used any boot animation and themes in my phone yet. I want to know about them.
Sent from my SGH-T959 using xda app-developers app
Wrong thread. Put that question in the Jelly Bean Banter thread. No need to hijack this thread until we get OP up and running.
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
maxpeet said:
Ugh, so I've been on vacation for a while, and since being back I've been super freaking busy =(
Finally spent some time with the phone tonight. Took some fiddling to get the right drivers working for the phone on my Win7x64 laptop.
In any case, I checked out that Kernel thread, and extracted the Bali kernel. Since I had flashed successfully(?) with Heimdall at first, and I'm becoming more familiar with it, I used it to flash the Bali_1.8.8-zImage. That appeared to work, as I get a new boot screen/animation with the Bali logo.
However, after the Bali logo disappears, the T-Mobile animation+sound plays, and then gives me a black screen. The screen is on (backlight is on) but all black. Also, if I touch a soft-button, they'll light up and the phone will remain in that state for as long as I can stand to wait. (one episode of Archer)
So, it's doing the same thing as before, but with a new boot logo/animation.
I wonder if something else in the ROM has been messed up? Should I forget trying to save it, and just use ODIN to flash a whole new rom/kernel package? I'll talk to the owner tomorrow and see if he's now willing to do that.
I also wonder if I was wrong to use Heimdall again, instead of using the CWM method. Please correct me if I'm wrong, but I think those two methods end up doing the exact same thing. Is one method more reliable than the other?
Bah, this sucks; I have more questions than answers at this point =( Any ideas, Woodrube, Toast?
Click to expand...
Click to collapse
Wrong they are not the same. cwm can do the work without a PC beside you can erase, back up , restore and flash, which make our life easier, heimdall or Odin ," I prefer odin "are the last option when you can't fix it with cwm
To fix your phone use Odin or heimdall and go back to stock don't worry all your files, photo, music, will be safe. Then
1 get root on you , if you don't how ask
2 get cWm
3 do a nandroid back up
4 have fun flashing all roms you want lol
Sent from my SGH-T989 using xda app-developers app
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Toast6977 said:
Yeah, I would just Odin back to stock JFD w/ repartition checked...
Then I'd flash something real stable for him. There are lots of stable ROMs to choose from. I used Bionix V for a long time before moving onto Jelly Bean.
Since the phone belongs to someone else, I'd stick with something lower than JB though. 911 can have/has issues.
Click to expand...
Click to collapse
do no check de re-partition button and use a .pit file follow this tutorial and you will be fine
http://forum.xda-developers.com/showthread.php?t=848737

Stock Flashable ROM

Alright, so I wiped my phone in TWRP in preparation to flash something and I neglected to make a backup (I know, rookie mistake). The ROM I tried flashing will not go through and now I am stuck. I can boot into recovery fine but I really need a ROM to flash so I have something to boot into. I can't use an RUU (I have tried), probably because I used the bootloader unlock/root work-around. I'd gladly take any advice but I think what I need is just a flashable .zip of the stock ROM or maybe a backup I can restore in TWRP. If some kind soul could help me out, I'd be forever grateful.
are you referring the the stock rom offered by mycomputerdoctor? If so, the flashing does fail, but your phone will still work. From what I understand the only problem is the error in TWRP and you wont have root anymore.
My phone does indeed still work, but I wiped /system before trying to flash so I don't have a ROM installed currently and therefore cannot boot past the splash screen.
http://forum.xda-developers.com/showthread.php?t=1999962
docnok63 said:
http://forum.xda-developers.com/showthread.php?t=1999962
Click to expand...
Click to collapse
Unfortunately, that is an RUU, which does not work for me. Thanks, though.
install the rom, even if it says fails, it should still boot. you could also just adb push the updated rom on to your sd card.
Thrillhouse847 said:
Alright, so I wiped my phone in TWRP in preparation to flash something and I neglected to make a backup (I know, rookie mistake). The ROM I tried flashing will not go through and now I am stuck. I can boot into recovery fine but I really need a ROM to flash so I have something to boot into. I can't use an RUU (I have tried), probably because I used the bootloader unlock/root work-around. I'd gladly take any advice but I think what I need is just a flashable .zip of the stock ROM or maybe a backup I can restore in TWRP. If some kind soul could help me out, I'd be forever grateful.
Click to expand...
Click to collapse
Im in the same boat :/ stuck in recovery and have no rom to flash. going to try to adb the latest version and see how that goes.
I was afraid of something like this. We shouldn't be messing with our phones without a back to factory state.
I'm actually all set now. I flashed the updated stock, debloated ROM and made a back up so I'm good to go.
Sent from my HTC6435LVW using Tapatalk 2

[q] help!! Note down

So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
dar101978 said:
So ,im sorry but its a long story. Hopefully someone can help. My note is Rooted Ive been using TWRP. Everything had been fine until 2 days ago. I tried flashing a ROM i found on Goomanger.( I had been running liquid smooth) just wanted to try something different. Anyways it got stuck on a boot loop. Cant remember the name of the Rom. Anyways i was able to get back to recovery, thankfully. But when i wiped and flashed back to liquid smooth it would say optimizing apps, then it would reach a certain number then reboot and star all over again. So then i tried another Rom and the same thing happened. tried flashing back to stock rooted but it would turn on then completely crash and star booting up again. So finally i was able to flash paraandroid 4.1.2 and Gapps, but here is the kicker i have no service (AT&T) says cannot locate network, my IMEI is gone basically the cellular isn't working. Everything else works fine WiFi,apps, camera. Just cant make calls. I really need your guys help please.:crying:
If you have a suggestion please let me know, i hate using an old Iphone
Click to expand...
Click to collapse
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
CalcProgrammer1 said:
Just odin back to stock. Get a complete factory stock image from the main sticky thread and flash it with Odin and Download Mode. There's a bug on one of the TWRP versions with 4.3-based ROMs that will put it into a bootloop by breaking device reboots. I was unable to flash my way out of the problem and was forced to do a complete reimage which solved all the problems and put me right back to clean-out-of-the-box state, then I reinstalled TWRP (though an older version before the boot loop bug) and re-flashed my custom ROM. The package I used was the stock image and Odin tool all in one .exe, just plug in to download mode and run it and it flashed bootloader, recovery, system, kernel, etc. all back to stock.
Click to expand...
Click to collapse
Thanks thats what i did, I just basically had to use KIES to use the emergency recovery, then root my phone again. My question is what version of TWRP causes this? cause i used the newest version i could find off GOO. My other concerne is, will it accept or be safe to use a custom ROM? Well i gues ill find out :laugh: THANKS AGAIN!
Everyone with the sgh-i717 is having problems with the latest TWRP and the most stable version is 2.5.0.0. Go with that one or you'll be starting all over again I imagine. And don't just stop at the download link in the OP's, read the thread and find out what's going on. The problems with TWRP have been going on for a while and the development threads have a lot of comments about the latest build causing problems. Good luck! :good:

Categories

Resources