Related
I"m not sure what to make of this case for the transformer. Does not have that many picture to show how well it fits and covers the transformer without the dock or with the dock. Does anybody have this product?
http://www.amazon.com/Poetic-Ultra-...J6/ref=sr_1_16?ie=UTF8&qid=1314846049&sr=8-16
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
narikki said:
been waiting for this to come out and someone to get it!
its been on preorder status till today i think
Click to expand...
Click to collapse
It's available now for 25 $ at Amazon. I am ordering one tonight.
manaskb said:
It's available now for 25 $ at Amazon. I am ordering one tonight.
Click to expand...
Click to collapse
when you get it can you post some pictures up of how it looks with the dock without the dock fully closed thank you
I pre-ordered one last month and it shipped friday. Should have it this week. I'll post some pics when it gets in.
According to tracking, mine should be arriving today. If so, I'll get some pictures up.
Pictures are attached.
sl0wd0wn said:
Pictures are attached.
Click to expand...
Click to collapse
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
What poor designing...they really need to make one of these but with something like hard silicon/TPU/Plastic, similar to the InCase products for Apple Macbooks. Those just snap on in two pieces to the exterier of the laptop and cover it nicely when its closed. This just looks like a bombardment of faux leather all over the place.
narikki said:
wow that doesnt look like the pictures from the amazon page.
how is the quality? imho doesnt look to great!
Click to expand...
Click to collapse
Received mine today. I can't send it back fast enough. It's fairly low quaility and does not fit well. The description says it is leather but I can't find any. Seems to be made of vinyl and fake suade. It was only $23 so I was not expecting much but the fit and quaility was poorer than I expected.
This looks like it could have promise for a similar pricepoint.
http://www.ebay.com/itm/Asus-Eee-Pa...?pt=US_Tablet_Accessories&hash=item3f0d4f8fa5
It's a shame that the Poetic case turned out to be such a disappointment.
I'm surprised, because I just got this Poetic case on eBay:
http://www.ebay.com/itm/280719327360?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
and it's great. It arrived in about 4 days from California.
It's a sturdy case that holds the Transformer using corner/side clips only,
which leaves all the ports easily accessible. It appears to be made of leather, or
at least a good quality plastic simulation. The case closes with a curved metal clip
which seems well-padded and doesn't damage the tablet.
The case has three positions. I use the highest for watching movies and the lowest for anything
that requires lots of typing. The front of the case folds completely flat behind the back,
and you can even dock the tablet, although the case isn't intended to hold the dock.
The best part: Even though the pictures don't show it, the flap connecting
the front and back has an opening for the dock/charging connector.
I can charge the tablet without removing (or even opening) the case!!!
I e-mailed the vendor and they assured me that the dock/charging connector
opening is standard and offered a refund if anyone gets one without it.
I've tried a bunch of cases - separate sleeves for the tablet, a "dual" sleeve with separate
pockets for the tablet and dock, etc., but this is the one I'm staying with.
If anyone is interested, I got the Diamond design one
Pics: http://imgur.com/a/ZXR7c
I just got mine! I actually paid 26something USD to ship it to The Netherlands (why are these rates so ridiculously high!?)...
In the end, it works fine for me. It fits my tablet, I don't have to take it off to attach the keyboard dock and it also closes with tablet + dock inside. Details are fine, fit is reasonably good (it seems to be a bit off at the front facing cam).
$24 makes a good buy.. at 50 (including shipping), I feel a bit dissapointed.
Then again;
to protect my phone, I bought www.pielframa.com last year they don't sell Asus eee cases (yet??). Cost me quite a bit. Great finishing, real craftsmenship! When I dropped the phone, the leather ripped and bit by bit fell of the casing. Now, there's a leather-less patch (about 1 cm) doesn't really bother me, but it made me wonder how much a phone case should actually cost.. knowing you're not that carefull and might drop it anyway
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Wow nice find.
Not sure if it's the same kind of case, but I just found
http://www.bestbuy.com/site/M-Edge+...218402861274&skuId=3441552&st=nook&cp=1&lp=15
while I was looking for a case of my own. Since the Amazon one is out of stock, it seems like an alternative.
DssTrainer said:
Just got this case from Amazon:
http://www.amazon.com/dp/B005MZ35NM/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Amazingly the only folio I've been able to find. I have the same style case for my iPad and I must set this is the way to go. Though I can see the desire for a portrait mode . The hand strap is a great touch for that.
Sent from my MoPho using XDA App
Click to expand...
Click to collapse
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
tmlee51 said:
It looks great and the size is perfect - compact and slim. How does it feel in hands - solid? Does it block the mic hole at the top?
Click to expand...
Click to collapse
Looking at the pics, it looks like the NT would snap into it at the four corners rather than any edges. The NT's mic is a small hole at the top of the device, offset from the center. I doubt this case would block it.
[Edit]
Sorry, I should check the reply more closely before posting. I was looking at the one from Best Buy.
This is the one I picked up. It's pretty nice, a couple of different angles to stand the NT up, and it surrounds the whole thing, so it's pretty secure.
edit: I'm not allowed to post links yet, but search on amazon for crazy on digital's folio case for the Nook Color
This may seem like a dumb question, but can you stand it up in portrait mode with this case?
@DssTrainer Has it came in yet? What do you think of it?
r2tbone said:
@DssTrainer Has it came in yet? What do you think of it?
Click to expand...
Click to collapse
Im also interested what you think of it. I was thinking about buying the official barns and noble leather writers case but this onle looks decent for the price.
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
I had this one for the nook color, and I loved it.
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Comando156 said:
Well i just bought one from amazon. It will be hear Wednesday. I will Take pictures, and write a in-depth review on it by next Friday. I will probably be buying a couple cases, and writing reviews to help people make their decision. Im starting with this one because it has the holes for speaker in it. Which is an important feature.
Click to expand...
Click to collapse
I look forward to the reviews. I don't even know what type of case I want. It will be nice to see comparisons.
i have the nook color version from this same company and i love it...it looks very nice and very comfortable and has at least 4 viewing angles but only in landscape mode.no portrait mode viewing.
JAVOedge Austin Back Flip Case for the Barnes & Noble Nook Color / Nook Tablet - Latest Generation (Gray)
(I'm new to XDA and I did not permitt to post links... )
This one looks great but expensive. $34.99 . Hope I can find one better... $34.99...
Cloudsnightmare said:
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
Just ordered this one, great price hopefully its great quality.
Cloudsnightmare said:
http://www.amazon.com/CrazyOnDigital-Leather-Protector-eReader-Package/dp/B006598LRO/ref=pd_cp_e_1
Just noticed this one, comes with a screen protector and its fulfilled by amazon. Maybe a nice alternative to the other ones that have been shown.
Click to expand...
Click to collapse
ordered this before I even saw your post.
Got it, hate it. No way to really fold the cover back and use it in portrait mode. Cover doesn't close flush with the nook.
Really nice quality leather.
If you case closes flush with the nook then I might be wiling to get a replacement and see if this one is defective but I don't think the magnets are strong enough/the groves to hold it in portrait prevent it from closing flush.
Just got the Speck Fitfolio in black. It fits very well and does not make it feel bulky at all. They have also extended the "vegan leather" on the back over the hard shell making it look far nicer.
Ok I purchased this case. Like the feel of it and its not too bulky. BUT, whatever chemicle they used to coat the leather absorbed into the bezel of my nooks rubber paint coating and caused a brown spotted discoloring.... I tried to clean it with alcohol and other cleaning products but its absorbed in the coating ... im pretty pissed to be honest. I just orders a skinomi woodgrain skin to cover the damage up, and plan on taking pictures and contacting the case manufactor to have them buy me a new nook! WARNING TO ALL!
I purchased this case
http://www.amazon.com/dp/B005MZ35NM/..._am_us?ie=UTF8
I've had it for about 3 weeks but haven't used it due to a very
strong chemical smell. The smell transferred to my hands after unpacking the case.
I've been waiting for the smell to go away before using it but after reading posts regarding damage the Nook finish I may never use it.
At the time I purchased my Nook I also picked up a B&N case that was discounted 30%. It's much better quality, I really like clips that hold it in place. Very quick and easy to pop the Nook in and out. The B&N case was approximately $10 higher cost but I feel it's higher quality case and worth the cost difference.
So I was searching for a replacement case because I'm really unhappy with my poetic slim case. I was searching on Overstock and came across this swivel case, and im in love. I've seen one similar for the ipad, but did not know one existed for the transformer. It leaves access for all ports, has a hard plastic back covered with that fake leather type feeling material. The transformer can rotate 360 degrees in the case as well as stand. The case does not add much bulk, but protects all sides, screen, and back. It closes with an elastic strap. I'm really happy with this new case!
http://www.overstock.com/Electronic...-Asus-Transformer-Tablet/6413029/product.html
Sent from my SGH-T989 using XDA App
Edit: I'm trying to upload pics, but the xda app won't let me for some reason. Pics posted soon as I get home.
Yep, I have about the same case, I purchased mine off Amazon. It's superb. My only complaint is that it's somewhat easy for the TF to fall out of the grooves when you have it propped up. Still, works great for what I wanted.
ImSlower said:
Yep, I have about the same case, I purchased mine off Amazon. It's superb. My only complaint is that it's somewhat easy for the TF to fall out of the grooves when you have it propped up. Still, works great for what I wanted.
Click to expand...
Click to collapse
yea, my other case did the same thing, but it's not bad for watching movies and video clips.
Glad to hear you like it. I just ordered the same one from Hand held items. They have it for 17. 99, and I had a $5 off cupon it was under $16. Shipped.
Sent from my Transformer TF101
Yes, very good case. Most case has cut opening on the corner and the tablet will dent if drop. This case covers all corner and it is very solidly build. There is the two and three groove version, get the two groove one. Mine holds the tablet very well and doesnt came off easily.
We just received ours and I could not be happier. It's exactly what I wanted out of the case.
Sent from my Transformer TF101
I have a question about this case. Can you charge the device with the case closed?
on the overstock link it says that it has cutouts for everything...they could just be saying that though
Sent from my Transformer TF101 using xda premium
osho741 said:
I have a question about this case. Can you charge the device with the case closed?
Click to expand...
Click to collapse
Yes you can, u can swivel it either way. That's why it's call 360, perfect isn't it?
yes! I dont know why it didn't occur to me that it would just swivel to the side with the charge port
Just received my case today from Overstock! Fits perfect. Great case...
Thanks for the heads up on this case!
I have a couple questions. How easy is it to remove for those of us who have the dock? Also if you fold the lid back how flat does it lay like if you were to read with it?
Interested, may buy one.
Sent from my ADR6425LVW using xda premium
Novarider said:
I have a couple questions. How easy is it to remove for those of us who have the dock? Also if you fold the lid back how flat does it lay like if you were to read with it?
Click to expand...
Click to collapse
It is pretty easy to remove the case. It holds the tablet very securely, but is easy to take out. And the lids folks back 2 ways. Either close to the swivel point, our in the muddle if the case. either way, it lays very flat.
Is it dockable? I only ask because the picture on overstock has a dock showing. If not its still a nice case for the price.
Sent from my HTC Sensation using Tapatalk
Not to bump an old thread, but is this case available with 3 angles instead of just two? How well does the plastic housing protect the tablet? I'm assuming is not removable like the RooCase as well.
Actually this case was the second one I bought..
I love this case... the TF is easy to put in it and remove it (while still being secure) and I dont own a dock so I cant say as to that, but other than it slipping out of the grooves sometimes its the best case I have seen... this is my new go to..
Are any of the cameras obstructed by the case? My original case I replaced (rooCase) had camera holes as small as those and the back camera looked like it had a circular vignette. The front camera only became affected when the case shifted a bit. Looks like this case would have similar issues, even though I love the rotatable aspect.
http://www.amazon.ca/360-degree-Swi...4PF8/ref=sr_1_1?ie=UTF8&qid=1331563396&sr=8-1
Is this the same case that you got, OP?
rikou_demon said:
Are any of the cameras obstructed by the case? My original case I replaced (rooCase) had camera holes as small as those and the back camera looked like it had a circular vignette. The front camera only became affected when the case shifted a bit. Looks like this case would have similar issues, even though I love the rotatable aspect.
Click to expand...
Click to collapse
I haven't noticed any issues with my camera, although i don't take pics with
it though... use my sgs2 for that... ill post pics of what the rear camera looks like with the case on.
BruceWayne133 said:
http://www.amazon.ca/360-degree-Swi...4PF8/ref=sr_1_1?ie=UTF8&qid=1331563396&sr=8-1
Is this the same case that you got, OP?
Click to expand...
Click to collapse
It looks exactly like the one I have.
Sent from my Transformer TF101 using Tapatalk
I received my MiniSuit Portfolio on Saturday.. It is a very nice case, very well made. Yes - it adds bulk but if you can't tell that when you ordered it then you didn't look at the pictures . It's a tri fold so of course it will add bulk, plus the leather. It is obviously very functional, and the side that holds a business card can probably hold a few pieces of paper but otherwise too much or it will just get entirely too fat..
OK, so the obvious things aside..... Here come the constructive criticisms. I'm a little concerned with the fit. The leather covers the bezel so when you dock it, it is really, really really tight.. I wonder if it puts "stress" on the fit of the dock and tablet.. The part that holds the dock snaps on.. It has little strap on the top corners, and when you add those it added and even tighter fit.. If you leave them off, and the dock slides down quite a bit when you are using it.
After only one day's use, the parts of the leather that go between the tablets and dock are pretty scuffed up.
Since the dock snaps off, I thought I'd be able to use the case for just the tablets if I didn't have the dock. Well I CAN, but the magnetic closer is part of the tri-fold that is on the dock portion, and so unless you have that part (even if it's empty), then the cover is very "flappy" (which is OK, so just fyi).
In all fairness, I am calling MiniSuit tomorrow. I need to get ask about another part of my order anyway (a different case, different purpose). This portfolio case is also ever so slightly "off" center enough that the camera is partially covered up (yes I've tried moving it several times but it still settles into the same place) I don't think that is normal, my friend's case is aligned perfectly.. So maybe this one is just a little warped overall.
I'm definitely giving MiniSuit benefit of doubt here, I am sure they will replace this one anyway since he camera hole is off center. Perhaps they can explain the width of the the leather between the tablets and dock. It's late and I can't remember ever seeing a "spec" for that. All I know is that it is really small.
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
slugbug2010 said:
I received my MiniSuit Portfolio on Saturday..
I've include some insanely detailed pictures for reference if anyone would like to see what I'm talking about
EDIT:.. Pics will have to come another time, gallery not cooperating
Click to expand...
Click to collapse
I'm looking forward to the pics! Thanks!
I just installed one of these covers on my wife's Prime and the camera on the rear is way off to one side also. And there are a few blems and over glues on the cover. I am not happy with this product. Let us know what you find out. I bought mine through Amazon so I am not sure what is my next step.........Thanks......
Ok, I talked to them and they were really great. They are sending me a replacement (and a prepaid label to return the one I have). They offered me a choice of replace or partial refund but I want to try a replacement. I told them I had photos of the camera port and the way the pictures came out and they very nicely asked if I wouldn't mind sending those in and thanked me in email for doing so.
I didn't not ask them about the leather being a bit thick (for my liking) or it getting scuffed already. I've read the reviews on Amazon and I don't really see anyone else mentioning this or thinking it's a problem. I'm hoping some folks on here get theirs in so we can see if there is a "space" difference between the og and Prime and maybe that is why it's not mentioned?
I think that is going to have to be a judgement call on my part. Dangit - if they had just made the bottom part hold the tablet with nice straps it would be fine, but the fact that it scuffed leather after one day ... seems to me like it is too tight. On the other hand......my friend looked at it, said he thought it looked fine and that it was leather - it would "break in" and flex. If I thought I would ALWAYS have the dock with it, I might be tempted to cut the dang leather off the bottom, but you can't really do that or the tablet will fall out with the dock gone. If I keep it, I might end up rigging it after a while anyway
Like I said - it's a nice case, very functional, it does add bulk, but anything we get that carries both will do that.
Ok...pictures. I used a toothpick for reference, you all have one of those and can tell for yourselves how far on will go in the small space between tablet and dock
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
duclet said:
Yeah, the case didn't fit my tablet and dock perfectly either. But their customer support is nothing short of amazing. I just emailed them, showed them a photo of the problem and they are sending me a replacement (they shipped it the same day I contact them). Should be getting it soon. Best thing yet is they don't even need me to return my defective unit.
Click to expand...
Click to collapse
Same here - they shipped it out and I have a tracking number the same day I called.
I didn't think they wanted the defective one back either, but in their email they wrote " A prepaid label will be included with your shipment for the defect". So.....I guess they want it back. Which is fine of course. I'm just not sure what they will do with it cuz I really don't think they are going to use it to make any changes or anything.
Well, I got my replacement. They did not end up sending a pre-paid return label so they don't want the defective one back apparently.
However the new one is worse than the first one as far as the camera port hole goes. It is obviously cut VERY wrong. So now both have been off very far towards the flash, covering parts of the camera lens. I realize i wont be using my camera very often, but I have noticed that it's rarely "planned" when I DO want to use the camera.
I also still have a big concern about the leather being so think between the dock and tablet. If everything else were perfect, I would likely rig it. I'd probably just cut it off. This would really only present a problem if you were to have the tablet without the dock because the tablet could slip out of the case with the having that section secured, but I'd just not use that case without the dock then (I have several other cases)
This is the perfect case for the combo, but it is flawed
Funny thing is - I received my other Minisuite case and LOVE it!! The ports and camera holes are perfect. It's the 360 degree rotating one (does not accommodate dock). I think, obviously, all these cases that look the same are made by some company in China, and then stamped by companies here. But for some reason the template they used for the nice leather keyboard/tablet combo is just not right.
Pretty much my experience, I do not believe they had an actual Prime in hand when they designed this case. Not pleased overall and waiting for better options.
Hey guys,
If anybody is looking for cases, I'm using this one.
http://www.amazon.com/MoKo-Folding-...1SCQ/ref=sr_1_2?ie=UTF8&qid=1337432342&sr=8-2
I like it a lot. It's very sturdy, strong build and the price is not bad at all. i would recommend it. Reviews are pretty good on it as well.. I'm not a big fan of folding cases but this one changed my mind. It's not those flimsy cheap ones they sell on ebay for $5. I had one of those for my tab 7.0 plus and it was garbage.
Ordered this same case over the weekend and am awaiting delivery. I do have the keyboard dock but see this as an excellent alternative for some situations. It's called a Transformer for a reason after all.
Sent from my Galaxy Nexus using Tapatalk 2
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
+ Very affordable
+ Sturdy
+ Proper screen protection
+ Fast delivery
+ Simple, yet stylish finish (leather-look, black)
But....
- I had to "adjust" the hole for the headphone. Originally it was placed 7 mm too low (when holding the tablet upright). But with a sharp knife, that is easily done.
- The cover is (when folded) hold in place by a small flap. I find that the friction is too low to properly keep the cover in place. So I improved it with some velcro. Now the cover stays were it is no matter how mucht I move the case around. Just make sure you place the soft side of the velcro on the cover (doesn't scratch the screen)
- It adds about half of the tablet in weight, which is no problem when its standing/laying on a surface of course. But just to let you know
-The 40 pin connector is at all times unprotected
- I am also thinkin of clearing some of the material around the on/off switch. I find it a bit too hard to reach (I am a lazy SoB, mind you )
- I will add a small loop for a stylus (not present)
I admit I am still waiting for the smart cover version like the one for the TF201. But until that moment, this one is it.
Cheers
I purchased this case and received it today. I really like it and it was a great deal. It's probably tthe best one for the money right now. Very well-made and fits perfectly. I especially like now the screen cover adjusts depending on the way you want to use the wedge stand and the magnets in said cover to keep it closed.
All-in-all, I highly recommend it to anybody who is looking for a case and is not going to be using the keyboard dock.
WOEHAA said:
I concur, its a good case and since I couldn't find it in the Netherlands, I also ordered it through Amazon.
Click to expand...
Click to collapse
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
jpc0480 said:
I am also in the Netherlands and am trying to order it from Amazon, yet the buyer says they do not ship to the Netherlands?
I am using this link: http://www.amazon.co.uk/gp/product/B007P657RI/ref=ox_sc_act_title_1?ie=UTF8&m=A2W9JVEMMG88KL
I was wondering if you could post the link you used?
Thanks.
Click to expand...
Click to collapse
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
smallblock said:
Try this one, branded differently but looks to be exactly the same thing. It came in the mail today
http://www.amazon.de/gp/product/B007ZOABJO/ref=oh_details_o00_s00_i00
Click to expand...
Click to collapse
Thanks for the link!
How do you like it?
***EDIT
I went ahead and purchased it anyway! Will be here on Monday!
I think it's great !!
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
smallblock said:
I think it's great !!
Click to expand...
Click to collapse
Yeah just got mine today! Fits nicely!
Didn't have to mod mine either!
Sent from my ASUS Transformer Pad TF300T using XDA
Is the extra cost of the Caseen skinny cases worth it over the moko?
tuffluck said:
i have it sitting on my desk at home, now i'm just waiting on the TF300 couple of questions:
1. assume the case closed leaves the inside of the case touching the screen. any damage possible here? it looks like pretty soft suede or microfiber, but still wondering.
2. what's the deal with carving out the headphone jack? has anyone else had to do this?
3. do you have pictures of the velcro thing? anyone else had problems closing it?
Click to expand...
Click to collapse
If you are talking about the Moko one?
1. No, No damage possible. I had it for a month or so and havent seen damage on screen. I wonder this to, but it doesnt touch the screen. Atleat for me it doesn't.
2. I didn't have to. I used the headphones with no problem. No carving..
3. I can send a picture of the velcro but it's pretty strong. The tablet doesn't move down or tries to walk away from the case.
Mine is supposed to arrive tomorrow (Friday). Can't believe the overwhelming positive feedback from so many other users who have this case.
I've ordered mine by UK
"MoKo(TM) Folding Cover Case with Stand for Asus Eee Pad Transformer 10.1-Inch Android Tablet (TF300 Sleeve), Black"
Items: GBP 11.99
Postage & Packing: GBP 5.15
------
Order Total: GBP 17.14
Payment Total: EUR 22,03**
Delivery estimate: 15 Jun 2012 - 16 Jun 2012
Click to expand...
Click to collapse
It's a delivery estimate, but generally the dispatches from UK are very quick.
I have the moko case for the tablet and its great. The reason the screen doesn't get scratched is because of 2 magnets that are sitting on each corner on the far end of the case and when the case is closed there is still about a centimeter or 2 of clearance. Great case imo
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Does the magnets affect the tablet?
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Drop-EX said:
Hi,
is it easy to take out? I use the dock very often and I'm just looking for a case for surfing the internet or watching films, so I don't have to hold the tablet all the time. But cases like the slim one make it very hard / annoying to take the tablet out.
Click to expand...
Click to collapse
No it's not. I take it out all the time. I personally don't like cases, but I had one because of my daughter.
rnagam1 said:
One of the reviews on Amazon for this case said that the magnets have some affect on the GPS. I am generally reluctant to bring electronics close to magnets. Does anyone see any issues with the magnets and GPS?
Click to expand...
Click to collapse
I saw that. I'll give it a try today. I don't use my tablet for gps so that doesnt bothered me.
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BL
I got this one the other day and am really liking it so far. If you are looking for a case that lets you stand the pad up in portrait and landscape this is a great buy!
MoKo(TM) 360 Degree Rotating Detachable Cover Case for Asus Transformer Pad TF300, BLACK (with Vertical and Horizontal Stand, Elastic Hand Strap, and Stylus Loop)
http://www.amazon.com/MoKo-Rotating...9?s=electronics&ie=UTF8&qid=1339688594&sr=1-9