Hi,
i don't know if this is possible, but lot of people have problems with touch screen on our chinese Tablets Bmorn V99 with ICS with original firmware.
Screen problem is gone when Bmorn is flashed with Eken ICS firmware, but there are other things that doesn't work with Eken.
Is there any way to get two IMG files (from Bmorn and Eken), and somehow get only display drivers from Eken and repack it to Bmorn?
Best regards,
Daniel
Anyone?
Related
Hi,
Recently I purchased a tablet.IEverything was going smoothly.Before 2 days I tried to install a custom ROM.I installed CWM but i got mount errors cache.So i tried to find a solution..After a bit of searching I found an img to re-flash it.Reflash was succesful the only problem is that my tablets touchscreen is a bit messed up.I touch the up left corner and the tablet clicks the bottom right corner.So i tried to find something to fix it but nothing worked.I tried to reflash with another img but live suit doesnt work even if the computer read the usb.
Now I have installed Q88+DT744B+A13_q8_4.2_20130725 this firmware but it doesnt work so good.It is designed for Galaxy tab I think.
Can someone give me the stock firmware?It's stock firmware is ICS 4.0.4
My tablets specs:
A13 Allwinners cortex A8
It is made by Serioux brand. serioux.com
As stock firmware had ICS 4.0.4
Model Name : S716TAB
Serial or whatever is this : S7162013054830
Thank you!!!
EDIT: Nevermind I found the best firmware!If someone has the same problem as me the name of firmware is JB 2.5.If you cant find pm me to send you the link with the patches (gsensor,TS,camera,etc).
S716TAB
koed12 said:
Hi,
Recently I purchased a tablet.IEverything was going smoothly.Before 2 days I tried to install a custom ROM.I installed CWM but i got mount errors cache.So i tried to find a solution..After a bit of searching I found an img to re-flash it.Reflash was succesful the only problem is that my tablets touchscreen is a bit messed up.I touch the up left corner and the tablet clicks the bottom right corner.So i tried to find something to fix it but nothing worked.I tried to reflash with another img but live suit doesnt work even if the computer read the usb.
Now I have installed Q88+DT744B+A13_q8_4.2_20130725 this firmware but it doesnt work so good.It is designed for Galaxy tab I think.
Can someone give me the stock firmware?It's stock firmware is ICS 4.0.4
My tablets specs:
A13 Allwinners cortex A8
It is made by Serioux brand. serioux.com
As stock firmware had ICS 4.0.4
Model Name : S716TAB
Serial or whatever is this : S7162013054830
Thank you!!!
EDIT: Nevermind I found the best firmware!If someone has the same problem as me the name of firmware is JB 2.5.If you cant find pm me to send you the link with the patches (gsensor,TS,camera,etc).
Click to expand...
Click to collapse
hi ,i have the same tablet ,,,,and i have a mess with my screen ,,,can you please send me to pm the link to the files you said ..
Hello,
I killed my FW after cleaning Dalvikcache with Droidtweaker and tried to install a Modded-ROM from the Techknow Forum.
But it doesn't work with my Touchscreen and then I found out that there is not THAT Wondermedia Via WM8880 Tab, it's ONE of many different that look the same.
I didn't know my exact Modelnumber so I looked at the Tab of my wife which I bought at the same Reseller one month earlier (TWD_V50_MID7_8335C_SD_GSL1680_TYF1012V5) and tried that .fwc -> same result.
Than I found a dump in the backup of my SD-Card and in that there was a +ForFun_V7_SD_ZET6251_7Z7Z233.fwc which means that this should be my Version of that Tab.
I tried different Roms since yesterday but I didn't find one who is working on my Tab. I tried one from geekbuying (which is without Lockscreen so I can connect my PC-Keyboard), two from techknow (the modded and the stock) and one a User found on google.
So I need to know if and where I can find the right driver for my Touchscreen (in my Backup of system.tgz) and how to get it in one of these Roms OR where to find a working Rom for my Tab. Best would be CM 10 as on my Xperia I love it... the CM 10 not the Xperia...
Thanks in advance!
hello! after trying all possible solutions out there to unbrick my sony tablet s i found out that the two only possible ways are:
1-SEND IT TO SONY AND ASK SPECIFLY FOR A SOFTWARE REPLACEMENT, this will cost about 40euros, (i sent mine and they told me that they would have to replace the lcd???) i will make a formal complaint about this idiotic budget request
2-REPLACE THE MOTHERBOARD. I bought a second one and replaced all pieces into the bricked one and thats what does it. i tried to replace only the flash memory but that didnt work. unfortunantly the 2 tablet are from different zones so i cant say if that was the problem.
there is nothing wrong with the hardware in our bricked tabs but since there are no software solutions out there yet these are the only two possible things so far.
Hi @pafmdsilva
Are you sure these are the only solutions?
I was happily using the device, with its stock 4.0.3 ROM and had never flashed it or rooted or done anything!
In fact, I had never used the micro USB connection in the side panel, until I went looking for more things yesterday!
So for a stock ROM user, who has used this device on OS v3.x and OS v4.x updates from Sony directly, what is the solution? I am happy to connect it to my computer, and perform a FULL backup of internal storage.
But before I flash anything, I want to do a backup!
Thanks for your feedback and sharing your knowledge!
Cheers,
Flipmode!
Hello! For me it was. If you still have stock ROM Its possible to flash the upgraded one And i belive that does it. If you find the honey comb from your country to downgrade it might Work too.
Sent from my ALCATEL ONE TOUCH 997D using XDA Free mobile app
Hi everyone,
I have a Ployer momo9 III tablet and I recently flashed a new ROM. The installation was successful and the tablet was able to boot-up to the main screen. The problem now is the touchscreen is not working (i can't type the keyboard or swipe the screen). I tried plugging a mouse using a USB-on-the-go converter and it was working fine.
I have run through the other similar threads but most of them involves custom ROM. And there were others that mentioned something about installing touchscreen firmware but i can't make sense of what the discussion is all about.
So let's cut to the chase. My questions:
(1) other than flashing the ROM, is there any other steps that i might have missed out? Example: driver installation, etc
(2) Now that the touchscreen is not functioning, what are the other options available for me to revive the tablet? I have tried flashing a custom ROM but it doesn't work. Maybe the ROM was not compatible.
(3) Appreciate if anyone would share a ROM that works on the Ployer momo9 III tablet.
FYI, i got the ROM from their official website (http://www.ployer.cn/cn/download_Guj...?DownloadID=63) but i have to admit that i am not sure if it is the correct ROM despite it labeled momo9 as it has several models to the momo9 line-up. I have tried contacting the manufacturer to get confirmation whether the ROM published on their website is compatible with my tablet but unfortunately there is no response.
Thanks in advance!!
wow, 70 views and not a single reply. there's a lot of selfish viewers. i just want to know if i am missing anything else after flashing the ROM. Example: driver installations and etc.
Did you solve this?
Anyone have a original firmware for my tablet? (RK3066)
More info on the tablet:
denver-electronics.com/denver-tad-10023
The screen went white when i flashed a 4.2.2 android rom, it works picturewise with mini hdmi, but the touch screen and the screen itself will not work properly.
I really need to get this working again as my 4 year old son uses this to play his games and stuff on
Thanks in advance!