Hello,
I'm looking for this stock rom :
Country/Provider: Ecuador - Claro
PDA: I9100UHKG7
CSC: I9100ECOKG1
Phone: I9100UHKG4
Version: Android 2.6.35.7 Gingerbread
PCODE: GTI9100LKLECO
HIDSWVER: I9100UHKG7/I9100ECOKG1/I9100UHKG4/I9100UHKG7
kernel version [email protected] #2
I have tried in several places including samfirmware.com with no luck.
According to CheckFus downloader and http://samsung-updates.com/device/?id=GT-I9100 there isn't an official ROM for Ecuador at the moment.
You can try a ROM for Chile (Claro) or Brazil (Claro or unbranded). Actually, you can try any ROM for samsung-updates.com (as long as it's for GT-I9100) because they'll all work with your phone and they all contain Spanish. As for Phone versions, they European ROMs are much better than the Latin American ROMs.
I am from Brazil (Claro) and I am using an European ROM (Nordic Countries, unbranded). It works flawlessly. Using Odin you can have it up and running in less than 3 minutes.
Hi Simonetti2011,
Well, my S2 came with that firmware preinstalled so I'm guessing it is another official firmware (probably from Claro Jamaica) modified for my country and carrier.
I'm using the Australian (UNBRANDED) XWLP8 (ics 4.0.3) without issues as well.
However in the event I want to sell it, I'd hope I could go back to the originial stock firmware.
I did take the precaution of doing a Nandroid backup, but I have read problems of restoring them. The safest way would be to flash the stock rom back.
So, thanks anyway, if you or anyone else gets your hand in that stock firmware, please do share.
EDIT: After your post, I decided to give it another try and find the firmware with CheckFus, but using the Advanced tab. Well, after entering the necessary data, IT FOUND the firmware! GT-I9100_ECO_1_20111005162240.zip (302MB). I confirmed it as well at http://fus.nanzen.se/, by entering the following data:
Model: GT-I9100
Product Code: GTI9100LKLECO
HIDSWVER: I9100UHKG7/I9100ECOKG1/I9100UHKG4/I9100UHKG7
So, now I have it, the original firmware for Ecuador, Claro carrier.
Related
I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
Is this correct? It seems older than what I have.. I dont mind, like I said I just want to debrand without ending up bricking the device. Any help would be greatly appreciated.
takamichi said:
I bought a SGII off ebay and after a few hours of reading I'm totally confused about how to debrand the phone. The original owner received the phone from Vodafone Ireland and rooted it to unlock it. Below are the phone specs
Android- 2.3.3
Baseband version- I9100BUKG1
Kernel-2.6.35.7-I9100XWKE2-CL187606 root-DELL101#2
Build- GINGERBREAD.BUKG2
KG2 firmware
I just want to get rid of all the vodafone software and other bloatware. Im not interested in rooting the phone.
Any stock rom removes branded stuff .
From my research I should go for the latest XEU firmware (Im in Malta, Europe) which is XWKF3
GT-I9100_XEU_I9100XWKF3_I9100XXKE7_I9100XEUKD1
KG6 2.3.4
XXKG6
Android 2.3.4
http://forum.xda-developers.com/showthread.php?t=1075278
This package has: PDA:XXKG6| PHONE: XXKG6| CSC:XEUKD1
Download: http://www.multiupload.com/59TL9IL3CJ
If you want XEU UK firmware .
jje
Click to expand...
Click to collapse
Thanks JJEgan, and just to confirm, the only downside to using these Franenstein builds is that I cannot use Kies to upgrade the firmware?
I just installed the firmware below as advised but I'm still seeing all the Vodafone bloatware. Everything went perfectly s described in the official thread. Did I do something wrong?
Factory reset your phone .
Phone should now be
PDA:XXKG6| Baseband : XXKG6| CSC:XEUKD1
jje
Thanks, that worked perfectly!
Hello,
Just received my SGS2, and after boot i found a.......pretty bad surprise, the FW in my phone is a provider one, so far "nothing wrong" BUT is crappy as hell, i don't even have google apps on it. And the browser is labeled as "iPortal Mobil".
So i want to have it running Stock Samsung firmware, with no brand, no crappy apps, and no Carrier information.
The current firmware info is:
PDA I9100UHKE2
Phone: I9100UHKE2
CSC: I9100ECOKE1
The phone is a I9100, from Claro Ecuador.
I have searched in SamFirmware, and in the threads for official firmwares:
http://forum.xda-developers.com/showthread.php?t=1075278
http://forum.xda-developers.com/showthread.php?t=1113928
And i can find, FW with the same PDA/MODEM, but not the same CSC.
I tried to find my FW in case i need to roll back for warranty purposes, but no luck so far.
I'm gonna call Claro PR, to ask them about this, but i don't expect any help..
The question is:
From the List on Samfirmware, whick FW should i use to de brand my phone, in the America Region, the FW listed are really old, and there is no info about if they are branded or not.
I have read that flashing other region firmwares can bring issues, hence i cannot flash one of those, the most common one being Wi-Fi drivers, is that true?
In a couple posts related, some people say that Claro requires that a "Claro" branded fw is flashed, otherwise the phone will have some issues, anyone who can shed some light in that?
Any help is really appreciated
Hello, my I9100 is from Claro Ecuador, yes its ugly what they made in this Rom but you can use any unbranded oficial Rom, try SamMobile. Im actually using the LP4 from Luxemburg and everithing is working fine. In order to do this you must read about flashing ROMs with ODIN.
Hi Droiders,
I use Galaxy S2 (Android 4.0.3). Last night I had rooted my phone successfully.
Now I want to update my firmware, can anyone provide compatible Official Stock ROM of Android 4.0.4 for my phone
Can I install any region Stock ROM while upgrading ?
Additional Details:
I am from India , my current OS is Australian region (XSA) unbranded
Model NO: GT - I9100
PDA: I9100XWLP8
PHONE: I9100XXLPS
CSC: I9100XSALP4
Appreciate your help ...
Thanks,
Krishna
Couple of places you can get stock roms: Samfirmware.com, here (this site is better than Samfirmware IMHO) or with the PC version of Checkfus (search for it on Google/XDA).
Yes, you can install a stock rom for any region, but with one caveat. If you install a rom that isn't for your region, you may not be able to get future OTA updates from your carrier. Which isn't really a big deal because if your carrier does release a stock rom for your region, you could always download it with Checkfus & flash it with Odin (like almost everyone does on here).
Hey guys,
I have a New Zealand Samsung S3 GT-I9300.
It's got no branding on the phone, no logos, no logos on startup etc and I didn't buy it from a Telecom, 2 Degrees, or Vodafone store so I assume its unlocked. I bought if from an electronic store called **** Smith.
It's on the Telecom network - just chucked in my Telecom SIM.
OS - 4.0.4
AP - 19300XXALF2
CP - 19300XXLF2
CSC - 19300NZCALF1
At the moment when I plug the phone into Kies, it gives me the message "Your device's current firmware version is not supported to firmware via Kies".
After doing some research and troubleshooting steps like making sure Kies is up to date, reinstalling drivers etc I saw that some people said that if your CSC is wrong Kies won't upgrade your phone.
I realised that Jellybean hasn't been released for NZ yet but I figure that Kies should be saying something along the line of 'You have the latest firmware..' instead of saying its not supported.
So I was just wondering if my CSC looks fine for an unlocked NZ S3.
Let me know if you need any more information.
Cheers
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Taubin said:
My S3 is unlocked from Parallel on Vodafone NZ had the same CSC with no problems. I wouldn't worry about it much you can always flash via Odin.
If you are worried about it, flash the stock rom via Odin and use the BTU CSC that's what I've done, I have had no issues with it at all, and it's updated itself all the way up to 4.1.1 OTA with no problem.
Also, have you rooted the phone? If so it can report that you are unable to update via Kies
Click to expand...
Click to collapse
Thanks for your reply and advice
My phone isn't rooted.
BTU is UK right?
Couldn't I just change the CSC instead of flashing another ROM?
This will void warranty right? Don't really mind but just wondering out of curiosity.
Cheers
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Taubin said:
Mine isn't rooted either. You don't need to be in order to install the rom through Odin.
BTU is in fact UK
You can try to change the CSC first and see if that works, keep in mind it's going to wipe your phone when you do so.
It should not void the warranty, as you will still be using a default stock official rom, most people load the stock official when sending it in for repair work
By the way, the stock rom I used was the one listed here http://forum.xda-developers.com/showthread.php?t=1646610 from May 13th :
I9300XXALE8 Download (Thanks To SamMobile!)
Base Firmware: I9300XXALE8 (4.0.4)
Region Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 13 May 2012
Modem: XXLE8
CSC: OXAALE8
Change List: 554452
I then accepted OTA updates on the phone directly to get it up to the current rom
Click to expand...
Click to collapse
Thanks for that!
I'll give that a go.
Thanks
Just by coincidence my phone updated to Jellybean 4.1.1 via OTA a few days ago without me having to flash another stock ROM on it.
Also, Kies now reports that I have the latest firmware.
Looks like all I had to do was be a bit more patient.
Everything seems to be in order now.
Cheers for your help anyway guys.
Hi Folks,
I have a question regarding debranding / updating my S3 (4.1.2)
This is all new to me and with the wealth of information here and elsewhere online I'm a little unsure about the correct files to use.
My S3 was originally on O2 Ireland and it has been unlocked so I can use it on Vodafone Ireland.
The phone is on 4.1.2 and Kies and OTA firmware update both state I have the latest firmware.
So now curiosity has gotten the better of me and I want to manually update to 4.3, and while I'm at it, I want to debrand and just have a stock firmware.
Reading online says the Switzerland firmware is stock and bloatware free.
These are the details...
PDA: I9300XXUGNA5
CSC: I9300AUTGNA1
MODEM: I9300XXUGMK6
If I flash with these, is that all I need to do to debrand and have the latest firmware?
There is a 4.3 Vodafone firmware on Sammobile so I suppose I could use that if the Swiss one didn't work.
As a noob to flashing, ROMS, Odin etc etc I appreciate any advide or guidance.
Thanks
Ciaran
No stock rom is debloated, they all have tons of Samsung rubbish included.
Any firmware for the i9300 will work, just make sure the included modem will work in your country. Usually anything European is fine but you may lose OTA due to wrong CSC.
Current phone details are...
AP : I9300XXELLA
CP : I9300XXELLA
CSC : I9300O2IELL1
Hoping for some more advice!
How do I know if the csc is correct?
This is the Vodafone Ireland file,
I9300XXUGNA5_I9300VFGGNB1_VDI
and the (more generic?) Swiss file,
I9300XXUGNA5_I9300AUTGNA1_AUT
I know the Swiss file won't have any branding, but don't know if the modem and csc settings are correct.
The Vodafone one on the otherhand will have the correct settings but lots of VF bloatware and branding.