Related
I would like to both sim unlock and unlock the bootloader on my X10a. First of all, what does this log mean? I've successfully installed the clean generic 2.3.3 rooted and CWM5. However, I'm afraid of moving forward with unlocking the bootloader because of this state.
Is it safe to unlock via flashtool?
Also, will a sim unlock code purchased online work in this case?
Update: I've gotten accustomed to a ROM that works great with a locked BL (thanks Cobrato! ), so I just need to get this simunlocked and I'll be a very happy camper.
Thanks! Log is attached.
Code:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
SIMLOCK STATE: "TAMPERED"
LOADER AID: 0001
hash not supported [00000000000000000000000000000000]
Elapsed:5 secs.
PROCEDURE STOPPED BY USER
Bump. Does anyone know what the tampered simlock state means and if the phone is still simunlockable?
I've called AT&T to request an unlock code and they say that while the IMEI is found in the system and is 'unlockable', they don't actually have the code.. Should I try contacting SE or is a cable method more feasible..?
I've tried two ebay sellers for a code, both were unable to provide it as well.. Is there just no code option and is cable a must?
No one has any insight on this issue..?
I got same problem on mine e10i. Do you solve this problem at the end or?
Since beginning I have bootloader not possible to unlock.
Since I used Wotan “Xperia neo Unlocker” to debrand my phone when I input *#*#7378423#*#* I see now that say bootloader unlock allowed.
When I connect phone to computer pressing the menu button I have blue light.
Can I just by this assume that my bootaloader is unlocked?
One way will be to try install something only allowed for unlocked bootloader but I don´t want to mess my phone or if is not unlocked simple nothing happen?
Thanks
It would seem that it's unlocked
How to check is bootloader is unlocked
pedrofigo said:
Can I just by this assume that my bootaloader is unlocked?
Click to expand...
Click to collapse
How to check is bootloader is unlocked:1. Download S1Tool (attached)
2. Un7zip and Run s1tool.exe and click on DO JOB
3. Connect phone to PC with pressed "back" button
4. Now you wiil see something like this in the program window:
Code:
9/9/2011 21:41:44 Welcome to S1 identify tool
9/9/2011 21:45:13
9/9/2011 21:45:13 TO CONNECT NEXT PHONES
9/9/2011 21:45:13 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
9/9/2011 21:45:13 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
9/9/2011 21:45:13 PRESS AND HOLD "BACK" BUTTON...
9/9/2011 21:45:13
9/9/2011 21:45:13 PLEASE ATTACH TURNED OFF PHONE NOW
9/9/2011 21:45:13
9/9/2011 21:45:46
[COLOR="Red"]9/9/2011 21:45:46 RUNNING S1_EROM VER "r8A029"[/COLOR]
9/9/2011 21:45:46 SOFTWARE AID: 0001
9/9/2011 21:45:46 LOADER AID: 0001
9/9/2011 21:45:49 FLASH ID: "002C/00BC"
9/9/2011 21:45:49 LOADER VERSION: "R4A045"
9/9/2011 21:45:49
9/9/2011 21:45:49 MODEL (from GDFS): X8
9/9/2011 21:45:49 SOFTWARE VERSION: 1236-9291_2.1.1.A.0.6
9/9/2011 21:45:49 CUSTOM VERSION: 1241-3178_R1B
9/9/2011 21:45:49 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
9/9/2011 21:45:49 SERIAL NO: CB511SPH7Q
9/9/2011 21:45:49
9/9/2011 21:45:49 SEMC SIMLOCK CERTIFICATE
9/9/2011 21:45:49 Elapsed:36 secs.
5. Look to line "RUNNING S1_EROM FROM VER "#8A029"" You will see small or capital R letter
small r - bootloader unlocked
capital R - bootloader locked
PS Sorry for my english
Thanks for reply.
Suing S1 tool like you said here is what I get
Is locked or not my bootloader?
Having r like you said is unlocked? Correct?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]
Yes. Small r - Unlocked bootloader. Don't update firmware via FOTA
It seems that is not unlocked.
If it is unlocked, u can see a "yes" instead of "allow"
harveyxia said:
It seems that is not unlocked.
If it is unlocked, u can see a "yes" instead of "allow"
Click to expand...
Click to collapse
lol?
It always(of course on not branded phones) show "Yes", it never shows allow
After unlocking BL, nothing change in service menu, if it showed "Bootloader unlock allowed:Yes" than after unlocking it will show same
If it says "Bootloader unlock allowed:No" means that your fastboot is disabled, and after enabling it it will show "Bootloader unlock allowed:Yes" then you can ether unlock it(BL) yourself, or person who enabled your fastboot via setool for example.
Yes is unlocked.
I already have connection with flastool.
Now just wait for courage…lolol….to try something like a different kernel ;-)
Thanks for your comments.
So, have you tested if it accept custom kernels?
Don't be afraid, you can't kill it, just flash it and see if it boots. Download setCPU and try to move frequency higher.
I'm curious, in that Unlocker by wotan server, do you need to use test point?
Madfysh said:
So, have you tested if it accept custom kernels?
Don't be afraid, you can't kill it, just flash it and see if it boots. Download setCPU and try to move frequency higher.
I'm curious, in that Unlocker by wotan server, do you need to use test point?
Click to expand...
Click to collapse
Yes I am using NightElf Kernel and also tried [ROM] Neo |Team Xperia/SE.TWEAKED| V1.0 |23/02/12| (don´t like it).
NightElf Kernel has a great performance and is also very good battery friend. Last night, in 6 hours I only lost 4%.
Wotan unlocker first intend was to unlock my phone from network. It was branded. Before use Wotan unlocker I had: Bootloader unlocker allowed: NO. After I have yes and of course network unlocked. I used a software that I download and need to make a shunt between earth pin on phone and the second one….I believe is similar to S1tool.
I did the same, network sim unlock via test point. But, PCC has not worked since. It knows I've done something. SUS works sometimes. I have tried using flashtool, relock ftf and adb sony relock and none of this changed anything. Can I unpatch or correct the patch and unlock officially? I'd really like to do that.
Thanks for any info I don't know much about test point.
SharpnShiny said:
I did the same, network sim unlock via test point. But, PCC has not worked since. It knows I've done something. SUS works sometimes. I have tried using flashtool, relock ftf and adb sony relock and none of this changed anything. Can I unpatch or correct the patch and unlock officially? I'd really like to do that.
Thanks for any info I don't know much about test point.
Click to expand...
Click to collapse
You shouldn't have any problem with PCC or SEUS if you unlocked BL using s1tool.
And what do you mean by "network sim unlock via test point"?
I used a paid software (4SE) to remove the network lock on my phone, so I could use other networks. It confirmed if I wanted to unlock my bootloader as well. I didn't know much about it but knew that doing that would allow custom kernels etc. so I clicked yes.
The network lock is gone, perfect. But only through chatting with others I've learned that the bootloader is 'patched' not fully unlocked. No method that I've tried properly modifies the patch, yet. I checked the log files in C/programfiles and found the log file says it did use an S1 tool. The paid part is of course network unlocking not the bootloader part.
PCC has never worked since. The exact message it says is something like 'unable to start software components or software'. I've read extensively on that and the only hint I've found is that it may be related to a modified bootloader. I've Windows 7 and now 8 beta on my computer also and on that version it gives the same message now. I've uninstalled, updated java etc. everything I'm sure it's the phone not the computer.I'm sure it detects something.
SUS works some days. It's so strange whether I use stock SE 2.3 or a mod version it changes whether to say:
1. There is no new software for your phone
2. No new software, would you like to reinstall anyway?
I've no clue what that's about.
1) so when you clicked yes in 4SE, you needed to use testpoint right? though it's strange that 4SE used s1tool for that..
2) "unable to start software components or software" is down to PCC, not your phone.
3) SEUS is also strange, I tried few days ago, it also didn't let me repair software, telling me that I have latest. I could swear that, one time before, it asked me if it should repair it anyway.
And now to your main question(if I understood you right ), yes, you can "unpatch it", use restore option in s1tool, that is if 4SE really used s1tool to patch your bl, which is still strange to me, but maybe that's how they made it I expected they will use their own BL unlock.
Thank you very much for helping me understand! Other people will likely find this information in the future!
4SE I believe is done by the Da Vinci Team which is much more known.
1. Yes I used test point!
2. Good to know it's PCC and not my phone. Very good...
3. I have tried 'restore' and it says 'nothing to restore'. But I'm sure that I can work on that.
Here's the log if it reveals anything I don't yet understand:
4SE - client 1.7.6
Checking connection...
Connecting server using license447...
License name: 1 Day License
Time left: 23 hours
Selected model: Xperia™ mini (ST15)
Selected operation: Unlock
Selected interface: USB (BOOTROM)
Checking USB driver status...
Remove battery. Link the TestPoint to GND and then plug USB cable
Connected to USB2
You can now release the keys and allow the process to run. Do not disconnect the phone
Device identification...
Connecting DLOAD...
Sending Preloader...
Connected to USB2
Sending LoaderTEST...
Chip:MSM7x30 Model:ST15i IMEI:358*********** AID:0001 Color:BROWN
DEVICE_ID: 0CE2*******************
EROM:
Uploading logic MSM7x30:
Detecting flash type...
ID: 98B3 (Toshiba)
Chip: Undefined 8192 Mbit NAND
Logical address: 0x00000000
Size: 1056 Mb
Logical block size: 0x40000
Logical blocks count: 0x1000
OTP: LOCKED
Reading TA security data...
Opening TA...
Reading SIMLock data...
Processing SIMLock signature...
Opening TA...
Writing SIMLock data...
Writing S1boot image...
Shutting down device...
Operation completed successfully. You can disconnect the phone now
FINISHED [52sec]
Yup, you are correct about who made 4SE, "old" guys in SE world
Hm, interestingly.. it says that your color is BROWN, and that even before unlocking procedure. Usually in Xperia's brown means that unit is prototype at least if it says that without any modifications. But in older SE phones brown meant also another thing, so maybe they are calling it like that even if it's not proto.
Out of curiosity, can you download omnius from here: http://www.omnius-server.com/ and try identify your phone(after pressing identify, in connection method use first option, so that you don't need to mess with test point, I'm not quite sure what info you would get with tp identify ), and post log here(of course mask your IMEI), or you can just say if it says brown or red.
Also, you can download s1tool from here: http://www.4shared.com/archive/xjhXIDXh/s1tool.html
and also try to identify with it.
But to go back on your first post in this thread, what is your main question? I kinda lost it in all this talk
You are not sure if your BL is unlocked or?
mine is?
how about mine? after flashing 4.0.4 global rom I flash lockbootloader xperia2011 to make sure its locked again and when I enter service info menu theres no status shown about my bootlock. I mean really its nothing. Before when i was in GB .42fw rooted, it has a status of bootloader: YES. now its gone
johnraziel said:
how about mine? after flashing 4.0.4 global rom I flash lockbootloader xperia2011 to make sure its locked again and when I enter service info menu theres no status shown about my bootlock. I mean really its nothing. Before when i was in GB .42fw rooted, it has a status of bootloader: YES. now its gone
Click to expand...
Click to collapse
how did you unlocked it in the first place? official method from sony dev page?
Madfysh said:
how did you unlocked it in the first place? official method from sony dev page?
Click to expand...
Click to collapse
oh sorry madfysh I confuse myself. I didnt do any unlocking procedure in the past. All I do is root GB .42 fw and then flashed 4.0.4 when it was released the I flashed lockbootloader to make sure I havent unlocked my bootloader. The problem is, I cant update or repair via PCC or SUS after flashing the global rom. Is my bootloader unlocked? since its gone from the SI menu?
Madfysh said:
Yup, you are correct about who made 4SE, "old" guys in SE world
Hm, interestingly.. it says that your color is BROWN, and that even before unlocking procedure. Usually in Xperia's brown means that unit is prototype at least if it says that without any modifications. But in older SE phones brown meant also another thing, so maybe they are calling it like that even if it's not proto.
Out of curiosity, can you download omnius from here: http://www.omnius-server.com/ and try identify your phone(after pressing identify, in connection method use first option, so that you don't need to mess with test point, I'm not quite sure what info you would get with tp identify ), and post log here(of course mask your IMEI), or you can just say if it says brown or red.
Also, you can download s1tool from here: http://www.4shared.com/archive/xjhXIDXh/s1tool.html
and also try to identify with it.
But to go back on your first post in this thread, what is your main question? I kinda lost it in all this talk
You are not sure if your BL is unlocked or?
Click to expand...
Click to collapse
The main thing I'm looking to do is unpatch or just properly unlock my phone.
Here's the log from Omnius:
Code:
Action journal
16:42:56 . The action started waiting for the user
16:43:26 . The action finished waiting for the user
16:43:26 Connecting via SEMC USB Flash Device (USB2)...
16:43:26 Device driver version: 2.2.0.5
16:43:26 Detected chipset: MSM7X30
16:43:26 Boot mode: EROM
16:43:26 EROM version: 1241-3656 R9A021
16:43:26 IMEI: 35**********
16:43:26 Device ID: 0CE2********************
16:43:26 Minimum loader AID: 0001
16:43:26 Color: Red SEMC
16:43:26 Phone rooting by manufacturer is enabled.
16:43:26 i Unsigned flashing is disabled.
16:43:26 Sending loader...
16:43:26 Waiting for loader response...
16:43:28 Phone model (from TA): ST15i
16:43:29 Current CXC (from TA): 1244-2098_4.0.2.A.0.62
16:43:29 Current CDA (from TA): 1249-6223_R3D
16:43:29 Current FS (from TA): WORLD-i_4.0.2.A.0.62
16:43:29 i The phone is not locked to a network.
16:43:29 i Simlock origin: Unknown simlock origin, 734D7C4A9D088D9464B644C627E96237193B3437
16:43:29 s Successfully done.
16:43:29 . The action entered shutdown phase
16:43:29 . The action reported success
Additional details
---
2F B4 6E 69 5C EB 9C F5 36 FD 40 C1 3A DB D8 84
D9 94
---
I see it says RED here...
I have flashed my neo MT15_4.1.B.0.431_Global.ftf file.
And now it says emergency call only-No SIM card.
SIM has no problem in other phones.
What happened to it.
And it doesn't enter fastboot
Please help me
Problem !!!
I have the same problem now. Please someone help me!!!
I am so sad that I cannot find nobody here helps me...
http://forum.xda-developers.com/showthread.php?p=26472385
Sent from my MT11i using XDA
Which flashtool you used to flash that ftf?
---------- Post added at 10:06 PM ---------- Previous post was at 09:45 PM ----------
mpiekp said:
http://forum.xda-developers.com/showthread.php?p=26472385
Click to expand...
Click to collapse
that guy messed up using wotans unlock tool.
This sounds like a similar problem, but I have seen few people so far messed up their phones only by flashing clean ftf.
In latest(or at least in few latest version) flashtool version you can see
WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
not sure if that file was flashed before or not, but it sure didn't give you warning.
One guy bricked his Xperia S messing with .ta file, and that's why falshtool guys made this ignore, which is why I think in before version it was flashed.
.62 and .562 have same simlock.ta file, while the one from .431 differs. hm, but then again .42 also have different file. *
Maybe I'm talking sh*t but I bet my ass that those who have this problem used older version of flashtool.
Also those people who got this problem also get changed root status in service menu, those who had yes, now they have no.
EDIT: here: http://forum.xda-developers.com/showpost.php?p=26761620&postcount=140 I see OP used 0.8 flashtool, so my theory doesn't flow don't know what could be wrong here..
EDIT2: looks that I can only find users with Neo which have this problem
EDIT3:* hm ok, .62 and .562 are for same region, while .431 and .42 are for different regions. Lol, with each edit, I'm loosing my theory but interesting to research
(((
Madfysh said:
Which flashtool you used to flash that ftf?
---------- Post added at 10:06 PM ---------- Previous post was at 09:45 PM ----------
that guy messed up using wotans unlock tool.
This sounds like a similar problem, but I have seen few people so far messed up their phones only by flashing clean ftf.
In latest(or at least in few latest version) flashtool version you can see
not sure if that file was flashed before or not, but it sure didn't give you warning.
One guy bricked his Xperia S messing with .ta file, and that's why falshtool guys made this ignore, which is why I think in before version it was flashed.
.62 and .562 have same simlock.ta file, while the one from .431 differs. hm, but then again .42 also have different file. *
Maybe I'm talking sh*t but I bet my ass that those who have this problem used older version of flashtool.
Also those people who got this problem also get changed root status in service menu, those who had yes, now they have no.
EDIT: here: http://forum.xda-developers.com/showpost.php?p=26761620&postcount=140 I see OP used 0.8 flashtool, so my theory doesn't flow don't know what could be wrong here..
EDIT2: looks that I can only find users with Neo which have this problem
EDIT3:* hm ok, .62 and .562 are for same region, while .431 and .42 are for different regions. Lol, with each edit, I'm loosing my theory but interesting to research
Click to expand...
Click to collapse
i have flashed ICS as true 3 times but at first, i havent changed my pc settings to english. and tried to install like that. now i flash ICS as right ways and ICS works on mobile but mobile simlocked, someone wrote something about s1tool but i didnt understand how to use it
mpiekp said:
http://forum.xda-developers.com/showthread.php?p=26472385
Sent from my MT11i using XDA
Click to expand...
Click to collapse
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_4.0.2.A.0.62
CUSTOM VERSION: 1246-9107_R3D
FILESYSTEM VERSION: WORLD-1-8_4.0.2.A.0.62
SERIAL NO: BX902GFU94
SEMC SIMLOCK CERTIFICATE
Elapsed:9 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
supported phone was not detected
Elapsed:72 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"
RESTORED
Elapsed:5 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_4.0.2.A.0.62
CUSTOM VERSION: 1246-9107_R3D
FILESYSTEM VERSION: WORLD-1-8_4.0.2.A.0.62
SERIAL NO: BX902GFU94
SEMC SIMLOCK CERTIFICATE
Elapsed:7 secs.
I did everything the link you've given.It says "RESTORED".
But when I put sim again.The problem still exists.
-NO SIM
-EMERGENCY CALL
-NO FAST BOOT
-BOOTLOADER UNLOCK ALLOWED: NO
Ok so that confirms, you've written s new ta. Your going to need to repair that, there is s package here for all Xperia to revert ta to default, search for fota unbrick. Try that
Sent from my MT11i using XDA
mpiekp said:
Ok so that confirms, you've written s new ta. Your going to need to repair that, there is s package here for all Xperia to revert ta to default, search for fota unbrick. Try that
Sent from my MT11i using XDA
Click to expand...
Click to collapse
You, my brother,
It seems you will be the man who will solve my problem.
I am searching for fota unbrick.
Thank you so much brother...
(by the way my phone is not S, it is "neo" )
Same problem.NO SIM...****
04/038/2012 01:38:21 - INFO - <- This level is successfully initialized
04/038/2012 01:38:41 - ERROR - Cannot identify your device. Found MT15 while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
04/038/2012 01:38:41 - INFO - Selecting from user input
04/038/2012 01:38:45 - INFO - Connected device : X10
04/038/2012 01:38:46 - INFO - Installed version of busybox :
04/039/2012 01:39:26 - INFO - Preparing files for flashing
04/039/2012 01:39:27 - INFO - Searching Xperia....
04/039/2012 01:39:28 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&35BD6F85&0&3
04/039/2012 01:39:28 - INFO - Start Flashing
04/039/2012 01:39:28 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";
04/039/2012 01:39:28 - INFO - Flashing loader
04/039/2012 01:39:29 - INFO - PROT_VER="03";DATE="20110217";TIME="15:47:00";VER="R4A066";CXC="1234-5769";TYPE="S1_LOADER";UNIQUE_DEV_ID="1D703660140A5F0B251681D7A0C3C21F6F01123D";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4B6D7100471404C81508042800B3E8D3B001002000000000";IMEI="**************";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_ID="0001";ACTIVE_LOADER_AID="0001";MEMDEVS="02:00:002C:00B3:0000:00002000:00020000:00000800:00000040";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="NO";LOADER_ROOT="S1_Loader_Root_773f";EROM_ROOT="S1_EROM_Root_d601";SW_ROOT="S1_SW_Root_883f";CUST_ROOT="S1_Cust_Root_9603";SIM_LOCK_ROOT="S1_SL_Root_c422";HW_CONF_ROOT="S1_HWConf_Root_08af";BIM_STATE="DISABLED";
04/039/2012 01:39:29 - INFO - Flashing preset
04/039/2012 01:39:29 - INFO - TA value : [00, 00, 08, FD, 00, 00, 00, 02, 00, 00, ]
04/039/2012 01:39:29 - INFO - Flashing finished.
04/039/2012 01:39:29 - INFO - Now unplug the device and power it on
04/039/2012 01:39:29 - INFO - Then go to application settings
04/039/2012 01:39:29 - INFO - turn on Unknown Sources and Debugging
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
FOTA cant
sercansaim said:
You, my brother,
It seems you will be the man who will solve my problem.
I am searching for fota unbrick.
Thank you so much brother...
(by the way my phone is not S, it is "neo" )
Click to expand...
Click to collapse
it cant solved simlock problem, i guess i have to wait for update for me or send it off to the service
mpiekp said:
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
Click to expand...
Click to collapse
During all of the processes, I never used test point. Software (S1tool, FOTA unbrick flasher etc) never wanted me to use test point.I only pressed back and connected USB.
Can you explain in which step I should use Test Point?
What I did:
-I was on Gingerbread.
-My bootloader was unlocked
-Pc system settings were TURKISH
-I flashed the phone using flashtool.I flashed "MT15i_4.1.B.0.431.ftf" file.
-In flashing screen, there was only simlock.ta
(I was beginner on flashing, ı didn't know that ı should change pc language to English)
-I flashed the phone.
-Phone booted with my old Gingerbread(Not ICS)
-I found that my phone says "NO SIM-EMERGENCY CALLS ONLY"
-I ve tried so many Sım Cards(All of them have same problem)
(I am sure phone has no Hardware problem.I dedects sim but something blocks it)
-I made restore using S1tool
-I flashed generic GB
-I made official ICS update via SUS
But no solution.My phone has the same error.
And also bootloader unlock allowed: NO
PS:When I try to flash all of the ftf files, during flashing process, I see:
warn the file is ignored simlock.ta
It flashes all of the other components.But doesn't simlock.ta files.
I hope you will help me.Because I need my phone...
mpiekp said:
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
Click to expand...
Click to collapse
What is the difference between;
*repair S1boot
*unlock bootloader
Repair puts back to how it was.
Unlock unlocks, but doesn't touch sim lock, therefore restoring should remove any changes you've made.
For sim lock you need omnius or setool and Card so it's s paid service.
Can I ask how did you unlock in the first place, as only a few have been locked by flashing 404, trying to find a link
Sent from my MT11i using XDA
mpiekp said:
Repair puts back to how it was.
Unlock unlocks, but doesn't touch sim lock, therefore restoring should remove any changes you've made.
For sim lock you need omnius or setool and Card so it's s paid service.
Can I ask how did you unlock in the first place, as only a few have been locked by flashing 404, trying to find a link
Sent from my MT11i using XDA
Click to expand...
Click to collapse
I dialed *#*#7378423#*#*
Then ı saw. "bootlader unlock allowed: YES "
Then ı unlocked it via official method http://unlockbootloader.sonymobile.com/
After that, it was unlocked.I was able to enter fastboot, install kernels etc...
But now my problem is, ı have so many options.Iwill buy credit from omnius, thats OK.
* Should I unlock bootlader?
* Should I unlock SIM?
* Should I repair S1 boot?
My phone always says no-sım
And bootloader unlock allowed "no"
Many people are saying that, ıf you unlock bootloader, you will unlock sim lock too.
Is this true???
Use the repair s1boot, it will fix both
Sent from my MT11i using XDA
mpiekp said:
Use the repair s1boot, it will fix both
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Ok. You are right. But it is still risky for me.
I don't want to waste my 15 €, that is why I am always asking questions to make sure about it.
At that point, I want to ask : It will repair my boot.But how? How does it know my bootloader and simlock status before it used to be?
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
mahmoudsalem91 said:
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
Click to expand...
Click to collapse
Try going back to stock ROM without root.... if you sim unlocked the phone then you should have the code.. use the same code and it might unlock.... I unlocked my phone by calling my service provider and asking them(AT&T, USA) .. they unlock phone after 3 months of use.... so try calling your service provider also...
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Try going back to stock ROM without root.... if you sim unlocked the phone then you should have the code.. use the same code and it might unlock.... I unlocked my phone by calling my service provider and asking them(AT&T, USA) .. they unlock phone after 3 months of use.... so try calling your service provider also...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
thanks for your replay. I didnt unlocked the phone using code. And it doesnt ask me anywhere to enter any unlock code so i dont think i would need to call my service network to help me in anything. And i did also back to stock rom ( 2.3 ) and i still have the problem!!
mahmoudsalem91 said:
thanks for your replay. I didnt unlocked the phone using code. And it doesnt ask me anywhere to enter any unlock code so i dont think i would need to call my service network to help me in anything. And i did also back to stock rom ( 2.3 ) and i still have the problem!!
Click to expand...
Click to collapse
So you unlocked sim or unlocked bootloader ? If its sim unlock then Call your service provider and ask for unlock code if the phone is older than 3 months.. they will give you some numbers... if you get and if you enter them you should be good to go... if its not unlocked then this problems, should not come in the first place...
Sent from my Transformer TF101 using xda app-developers app
mahmoudsalem91 said:
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
Click to expand...
Click to collapse
did you check if your bootloader is unlockable by using s1tool before trying to do so.
Its given here: http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
udupa82 said:
So you unlocked sim or unlocked bootloader ? If its sim unlock then Call your service provider and ask for unlock code if the phone is older than 3 months.. they will give you some numbers... if you get and if you enter them you should be good to go... if its not unlocked then this problems, should not come in the first place...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
there is nothing wrong with my sim card. i tried putting more than one sim in the x10 and its the same problem. so its from the phone... and its like that with unlocked and locked BL.
THeLogiC said:
did you check if your bootloader is unlockable by using s1tool before trying to do so.
Its given here: http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
Click to expand...
Click to collapse
i tried that and it gave me this in s1tool
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.0.1.B.0.19
CUSTOM VERSION: 1234-4752_R15B
FILESYSTEM VERSION: HUTCH-1-4-8_2.1.A.0.435
SERIAL NO: ( i deleted that )
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:27 secs.
any help???
mahmoudsalem91 said:
there is nothing wrong with my sim card. i tried putting more than one sim in the x10 and its the same problem. so its from the phone... and its like that with unlocked and locked BL.
i tried that and it gave me this in s1tool
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.0.1.B.0.19
CUSTOM VERSION: 1234-4752_R15B
FILESYSTEM VERSION: HUTCH-1-4-8_2.1.A.0.435
SERIAL NO: ( i deleted that )
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:27 secs.
any help???
Click to expand...
Click to collapse
I think thats the problem
You network unlocked your phone using omnius so if you unlock your bootloader you lose your network .
As far as i know you need to re unlock your network using setool and then try to unlock your bootloader
Sent from my X10
THeLogiC said:
I think thats the problem
You network unlocked your phone using omnius so if you unlock your bootloader you lose your network .
As far as i know you need to re unlock your network using setool and then try to unlock your bootloader
Sent from my X10
Click to expand...
Click to collapse
ok but it doesnt say anything on the phone that my network is locked!!
i just tried something... on the phone screenlock . i pressed ( menu - back - menu - back - back- menu - back - menu - menu - back ) and then i went into service info and then sim lock and it how me question marks in front of everything. it supposd to be 5's...
u sure that if i used s1tool it would fix this problem?
thanks
mahmoudsalem91 said:
ok but it doesnt say anything on the phone that my network is locked!!
i just tried something... on the phone screenlock . i pressed ( menu - back - menu - back - back- menu - back - menu - menu - back ) and then i went into service info and then sim lock and it how me question marks in front of everything. it supposd to be 5's...
u sure that if i used s1tool it would fix this problem?
thanks
Click to expand...
Click to collapse
No the problem in reality is this:
You can only unlock your bootloader successfully if your phone is network unlocked from company or network unlocked from setool. If you try to unlock your bootloader if either of above conditions aren't met, you lose your network .
S1tool just shows your sim certificate. If it is semc or setool sim certificate you can unlock bootloader without problem. But as u see your sim certificate is not that so you lost network.
The solution is to re lock bootloader using flashtool.
Re unlock your network using setool ( i reallly dont know how ) .
Then try unlocking bootloader.
This is what i have heard.
Sent from my X10
THeLogiC said:
No the problem in reality is this:
You can only unlock your bootloader successfully if your phone is network unlocked from company or network unlocked from setool. If you try to unlock your bootloader if either of above conditions aren't met, you lose your network .
S1tool just shows your sim certificate. If it is semc or setool sim certificate you can unlock bootloader without problem. But as u see your sim certificate is not that so you lost network.
The solution is to re lock bootloader using flashtool.
Re unlock your network using setool ( i reallly dont know how ) .
Then try unlocking bootloader.
This is what i have heard.
Sent from my X10
Click to expand...
Click to collapse
ok good, i just relocked BL but i just checked in the ( about phone ) and i sow unknown baseband!! i just flashed baseband 58 now and its stuck on SE screen.. what is the baseband for the last android update on x10i?
and for setool, if i will use it, i will have to buy box. else, the program wont start.. so the only way is unlocking it by Ominus and keep the BL locked... all i want now is just be able to use the phone!! its really sucks without android in my life lol
again thanks for your replays, it really means lots to me
phone info by Ominus ( the program i used to unlock the phone with )
22:31:57 . The action name is 'Identification'
22:31:57 Selected phone type: Xperia™ X10
22:31:57 Selected connection method: USB EROM
22:31:57 i Instructions
22:31:57 i 1. Make sure the phone battery is charged to at least 50%.
22:31:57 i 2. Switch off the phone!
22:31:57 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:31:57 i 4. Press and hold the return back button, then connect the cable to the phone!
22:31:57 . The action started waiting for the user
22:32:18 . The action finished waiting for the user
22:32:18 Connecting via SEMC USB Flash Device (USB1)...
22:32:18 Device driver version: 3.0.0.0
22:32:18 Detected chipset: QSD8250
22:32:18 Boot mode: EROM
22:32:18 EROM version: 1226-2253 R8A033
22:32:18 IMEI: 0125900-------
22:32:18 Device ID: 2C1EC52657B7CD4B02ADE7033B9E9D9AB2A66233
22:32:18 Minimum loader AID: 0001
22:32:18 Minimum software AID: 0001
22:32:18 Minimum EROM AID: 0001
22:32:18 Minimum customization AID: 0001
22:32:18 Minimum simlock AID: 0001
22:32:18 Serial number: ---------
22:32:18 Color: Red SEMC
22:32:18 Phone model (from TA): X10i
22:32:18 Current CXC (from TA): 1243-4429_2.1.A.0.435
22:32:18 Current CDA (from TA): 1234-4752_R15B
22:32:18 Current FS (from TA): HUTCH-1-4-8_2.1.A.0.435
22:32:18 i The phone is not locked to a network.
22:32:18 i Simlock origin: Omnius
22:32:18 Sending loader...
22:32:18 Waiting for loader response...
22:32:20 Flash chip ID: 002C-00B3
22:32:20 Memory card present: 8GB
22:32:20 Turning off the phone...
22:32:22 i Please disconnect battery and cable from the phone!
22:32:22 s Successfully done.
and i just install android 2.1-update and the baseband now working 2.1.54
anymore info?
mahmoudsalem91 said:
phone info by Ominus ( the program i used to unlock the phone with )
22:31:57 . The action name is 'Identification'
22:31:57 Selected phone type: Xperia™ X10
22:31:57 Selected connection method: USB EROM
22:31:57 i Instructions
22:31:57 i 1. Make sure the phone battery is charged to at least 50%.
22:31:57 i 2. Switch off the phone!
22:31:57 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:31:57 i 4. Press and hold the return back button, then connect the cable to the phone!
22:31:57 . The action started waiting for the user
22:32:18 . The action finished waiting for the user
22:32:18 Connecting via SEMC USB Flash Device (USB1)...
22:32:18 Device driver version: 3.0.0.0
22:32:18 Detected chipset: QSD8250
22:32:18 Boot mode: EROM
22:32:18 EROM version: 1226-2253 R8A033
22:32:18 IMEI: 0125900-------
22:32:18 Device ID: 2C1EC52657B7CD4B02ADE7033B9E9D9AB2A66233
22:32:18 Minimum loader AID: 0001
22:32:18 Minimum software AID: 0001
22:32:18 Minimum EROM AID: 0001
22:32:18 Minimum customization AID: 0001
22:32:18 Minimum simlock AID: 0001
22:32:18 Serial number: ---------
22:32:18 Color: Red SEMC
22:32:18 Phone model (from TA): X10i
22:32:18 Current CXC (from TA): 1243-4429_2.1.A.0.435
22:32:18 Current CDA (from TA): 1234-4752_R15B
22:32:18 Current FS (from TA): HUTCH-1-4-8_2.1.A.0.435
22:32:18 i The phone is not locked to a network.
22:32:18 i Simlock origin: Omnius
22:32:18 Sending loader...
22:32:18 Waiting for loader response...
22:32:20 Flash chip ID: 002C-00B3
22:32:20 Memory card present: 8GB
22:32:20 Turning off the phone...
22:32:22 i Please disconnect battery and cable from the phone!
22:32:22 s Successfully done.
and i just install android 2.1-update and the baseband now working 2.1.54
anymore info?
Click to expand...
Click to collapse
So it's working now??
Sent from my X10
THeLogiC said:
So it's working now??
Sent from my X10
Click to expand...
Click to collapse
No its not working. Just wanted to show u what I get about sim card when I use s1tool and ominus .. so can u help ? Plz!!!!
Sent from my X10 using XDA
wanted to add screenshots to what i have,,, the screenshots was taken while sim inside phone..
Use 2.1.71 baseband
Sent from my X10s using xda premium
mahmoudsalem91 said:
wanted to add screenshots to what i have,,, the screenshots was taken while sim inside phone..
Click to expand...
Click to collapse
According to ya pic, You have lost ya baseband. Flash 2.1.71 for your 2.3.3 ROM. Baseband affects radio receiver and gsm including mobile signal transmission. And if ya didnt update ya phone officially, baseband 2.1.54 willbe unusable in 2.3.3 and above. 2.1.71 baseband
Or i have 3.0.1.G.0.75 kernel+baseband (which is 2.1.71) ftf link for locked bootloader under my signature newcomer link download thefile, try relock ya bootloader, flash the ftf. And using stock rom to unlock bootloader once again. Ya prob should be solved. Hope helps
Whitefang
whitefang3456 said:
According to ya pic, You have lost ya baseband. Flash 2.1.71 for your 2.3.3 ROM. Baseband affects radio receiver and gsm including mobile signal transmission. And if ya didnt update ya phone officially, baseband 2.1.54 willbe unusable in 2.3.3 and above. 2.1.71 baseband
Or i have 3.0.1.G.0.75 kernel+baseband (which is 2.1.71) ftf link for locked bootloader under my signature newcomer link download thefile, try relock ya bootloader, flash the ftf. And using stock rom to unlock bootloader once again. Ya prob should be solved. Hope helps
Whitefang
Click to expand...
Click to collapse
ok so far so good. the pone doesnt show me insert sim card and it doesnt show me error while searshing for network but it show the msg in the attachment. it show all the networks now but it doesnt connect to any one from them... will it be eather if i unlocked the phone using setool2? coz it show me that when i get the information about the phone using s1tool... thanks
mahmoudsalem91 said:
ok so far so good. the pone doesnt show me insert sim card and it doesnt show me error while searshing for network but it show the msg in the attachment. it show all the networks now but it doesnt connect to any one from them... will it be eather if i unlocked the phone using setool2? coz it show me that when i get the information about the phone using s1tool... thanks
Click to expand...
Click to collapse
Are u sure it's not counter blocked?
Sent from my Xperia X10 using xda premium
wo88les said:
Are u sure it's not counter blocked?
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
i dont know whats that is. the phone was network locked and i unlocked it using Ominus. its like that since i unlocked the bootloader..
if you talking about going into the test menu thing when i press the menu and back botton while im on the lockscreen, then the answer is everything there is with questions marks insted of 5ssss....
Hi!
I use flashtool for flashing my SE x10i
When i wanted to flash a new firmware, i clicked on BLRelock.ftf by mistake....... Since than i haven't got radio capability. When I turn it on, it says "Please insert a sim card". If it matters my phone was debranding....
I tried lots of method, but I always failed.
Please somebody help ASAP.!
Thank you the answers in advance :'(
Hey there, i have this same issue, except my x10i kps rebooting or just freezes up whilst dn sumin with it, eg, running apps. I received phone frm my boet, we bth have no knowledge as to what had hapnd to the phone, bt suspect water damage, because if i take the cover off the bk, those pink dots on the white paper that shows that there has bn water intrusion, well at least thats what i think it myt be. I have 4 batteries, bt none undr a 2.5yr and oldest 2008, thats 5 years old. Bt sumin also tells me i shd try to purchase a new battery. No matr what sim i pt in it wont register. Bt look, i received it dead as a doornail, and nw it runs bt cnt kp running stable. I too used flashtool, i pt phone in debug n unknwn sources. It seems to lock up while this debug nw runs. i have rooted, im nt sure whether i did succesful recovery, i upgraded from 2.1 to 3 havn to flash several times. Because it freezes or restarts so i end up with no choices i cn think abt. If the debug runs successfully whats next? Turn it off and then? I just aint getn nowhere? I thought maybe phne puln too much power frm batries, bt it even reboots, restarts or freezes when on a normal ericson charger, or with laptop usb cable attached. I dnt knw what to do? Bt im gna have a onceover again, maybe i misd sumin bt that radio part, i hardly knw how these things work, bt im all ears to any ideas. Thanx in advance
Terrence
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
tibcic1994 said:
Hi!
I use flashtool for flashing my SE x10i
When i wanted to flash a new firmware, i clicked on BLRelock.ftf by mistake....... Since than i haven't got radio capability. When I turn it on, it says "Please insert a sim card". If it matters my phone was debranding....
I tried lots of method, but I always failed.
Please somebody help ASAP.!
Thank you the answers in advance :'(
Click to expand...
Click to collapse
Get s1tools and identify your device. Post log here.
Sent from my X10i using xda app-developers app
I had a similar problem. I wanted to lock the bootloader and i've clicked restore in s1tool. After relock bootloader my SEMC SIMLOCK CERTIFICATE changed to SETOOL2 SIMLOCK CERTIFICATE. I do not know why. Phone died. I try different things. Once again i've unlock the bootloader using qsd8250_setool2.cmd file. After that, my X10 alive.
Like epulrevo says, first check phone by s1tool. I bet that you will have SETOOL2 SIMLOCK CERTIFICATE.
epulrevo said:
Get s1tools and identify your device. Post log here.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Here it is :
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1236-4638_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511PP192
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:19 secs.
tibcic1994 said:
Here it is :
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1236-4638_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511PP192
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:19 secs.
Click to expand...
Click to collapse
U need to unlock your phone again.
Sent from my X10i using xda app-developers app
epulrevo said:
U need to unlock your phone again.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer
I might be a little bit stupid, but one more question:
Do I have to unlock the bootloader or debranding my phone?
tibcic1994 said:
Thank you for your answer
I might be a little bit stupid, but one more question:
Do I have to unlock the bootloader or debranding my phone?
Click to expand...
Click to collapse
Unlock bootloader, because your bootloader is relock improperly.
Sent from my X10i using xda app-developers app
epulrevo said:
Unlock bootloader, because your bootloader is relock improperly.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Can you write down how can I do that? And which program do you recommend? Just because all of my trying failed I tried to do it with flashtool and s1tool too.
I wanted to ask, with the debranding files available which wd i choose for South Africa cause i still have this problem. Kp getn your simcard does nt allow connections to this network? And the sim will pick up 4 networks i cn chose from, bt when i chose appropriate network thats the message i get. And the signal bar has a red x above it. I cn still use the phone for data via wifi bt its a phone also made for calls? Also another thing i lost my mem card with my xRecovery on it, the FT icon for recovery remains faded, cn i make another recovery? When i let FT reboot to recovery then it will either nt boot unless i remove the batry or it will basically just reboot bk to android, bypassing the recovery boot, it did work when i had my other mem card... hope im nt imposing here with that q. Thanks for any advice in advance.
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.