Hi!
I use flashtool for flashing my SE x10i
When i wanted to flash a new firmware, i clicked on BLRelock.ftf by mistake....... Since than i haven't got radio capability. When I turn it on, it says "Please insert a sim card". If it matters my phone was debranding....
I tried lots of method, but I always failed.
Please somebody help ASAP.!
Thank you the answers in advance :'(
Hey there, i have this same issue, except my x10i kps rebooting or just freezes up whilst dn sumin with it, eg, running apps. I received phone frm my boet, we bth have no knowledge as to what had hapnd to the phone, bt suspect water damage, because if i take the cover off the bk, those pink dots on the white paper that shows that there has bn water intrusion, well at least thats what i think it myt be. I have 4 batteries, bt none undr a 2.5yr and oldest 2008, thats 5 years old. Bt sumin also tells me i shd try to purchase a new battery. No matr what sim i pt in it wont register. Bt look, i received it dead as a doornail, and nw it runs bt cnt kp running stable. I too used flashtool, i pt phone in debug n unknwn sources. It seems to lock up while this debug nw runs. i have rooted, im nt sure whether i did succesful recovery, i upgraded from 2.1 to 3 havn to flash several times. Because it freezes or restarts so i end up with no choices i cn think abt. If the debug runs successfully whats next? Turn it off and then? I just aint getn nowhere? I thought maybe phne puln too much power frm batries, bt it even reboots, restarts or freezes when on a normal ericson charger, or with laptop usb cable attached. I dnt knw what to do? Bt im gna have a onceover again, maybe i misd sumin bt that radio part, i hardly knw how these things work, bt im all ears to any ideas. Thanx in advance
Terrence
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
tibcic1994 said:
Hi!
I use flashtool for flashing my SE x10i
When i wanted to flash a new firmware, i clicked on BLRelock.ftf by mistake....... Since than i haven't got radio capability. When I turn it on, it says "Please insert a sim card". If it matters my phone was debranding....
I tried lots of method, but I always failed.
Please somebody help ASAP.!
Thank you the answers in advance :'(
Click to expand...
Click to collapse
Get s1tools and identify your device. Post log here.
Sent from my X10i using xda app-developers app
I had a similar problem. I wanted to lock the bootloader and i've clicked restore in s1tool. After relock bootloader my SEMC SIMLOCK CERTIFICATE changed to SETOOL2 SIMLOCK CERTIFICATE. I do not know why. Phone died. I try different things. Once again i've unlock the bootloader using qsd8250_setool2.cmd file. After that, my X10 alive.
Like epulrevo says, first check phone by s1tool. I bet that you will have SETOOL2 SIMLOCK CERTIFICATE.
epulrevo said:
Get s1tools and identify your device. Post log here.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Here it is :
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1236-4638_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511PP192
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:19 secs.
tibcic1994 said:
Here it is :
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1236-4638_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511PP192
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:19 secs.
Click to expand...
Click to collapse
U need to unlock your phone again.
Sent from my X10i using xda app-developers app
epulrevo said:
U need to unlock your phone again.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Thank you for your answer
I might be a little bit stupid, but one more question:
Do I have to unlock the bootloader or debranding my phone?
tibcic1994 said:
Thank you for your answer
I might be a little bit stupid, but one more question:
Do I have to unlock the bootloader or debranding my phone?
Click to expand...
Click to collapse
Unlock bootloader, because your bootloader is relock improperly.
Sent from my X10i using xda app-developers app
epulrevo said:
Unlock bootloader, because your bootloader is relock improperly.
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Can you write down how can I do that? And which program do you recommend? Just because all of my trying failed I tried to do it with flashtool and s1tool too.
I wanted to ask, with the debranding files available which wd i choose for South Africa cause i still have this problem. Kp getn your simcard does nt allow connections to this network? And the sim will pick up 4 networks i cn chose from, bt when i chose appropriate network thats the message i get. And the signal bar has a red x above it. I cn still use the phone for data via wifi bt its a phone also made for calls? Also another thing i lost my mem card with my xRecovery on it, the FT icon for recovery remains faded, cn i make another recovery? When i let FT reboot to recovery then it will either nt boot unless i remove the batry or it will basically just reboot bk to android, bypassing the recovery boot, it did work when i had my other mem card... hope im nt imposing here with that q. Thanks for any advice in advance.
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
Related
FIRST OF ALL,i would like to thank the_laser for providing us with the tools http://forum.xda-developers.com/showthread.php?t=1253277
I Noticed a lot of confusion here in the process of Unlocking BL -me was one of the confused- so please make sure to do/notice those points before/during unlocking procedure
THIS THREAD IS ONLY FOR CAUTIONS. actual steps are here http://forum.xda-developers.com/showthread.php?t=1254087
THANKS TO 9Lukas5
IF U DON'T KNOW HOW TO USE FLASHTOOL FOLLOW http://forum.xda-developers.com/showthread.php?t=928343
FOR GUIDANCE about SIM lock and which patch to use refer to 9Lukas5's thread and replies.
BUT generally use "qsd8250_semc" if ur phone came
1.pre-unlocked
2.unlocked by code
and use "qsd8250_setool2" if u have unlocked it with "setool"
ANYWAY u can always use the other patch if ur signal is lost after using the first.-i have less knowledge about this issue as my phone came pre-unlocked and didn't try to unlock another one-.
FIRST OF ALL
1.USB Port not broken -can't do any upgrade or unlocking with a broken one-.
2.enabled "unknown sources" from settings/applications
3.enabled "USB debugging" from settings/applications/development. -should display "USB debugging connected" in notifications bar after USB connection IF NOT: pls flash another ROM and root it using aZUZU method as UNlocking won't work for u-.
AFTER FLASHING downgrade aZUZU kernel
4.MAKE sure ur FLASHTOOL -GB ready version- recognize the phone after SE logo displays on ur phone -FLASHTOOL should say "xperia x10 connected" then shows ur busybox version.
5. IF it doesn't recognized ur phone pls...UPDATE ur SE PC COMPANION.
6.if u don't like to update PC companion..USE THIS METHOD as 9Lukas5 describes
You don't need to update pccp or seus. Try the following:
1. open the drivers manager of your pc
2. connects phone in flashmode (without running any program like flashtool, seus or pccp)
3. check if there appears an unkown device, which wasn't there before (if not go on, if yes read under the line in this post further on)
4. no unknown device? Good
5. turn on phone and connect usb cable again and check again for unknown devices
__________________________________________________ ___________________________________
If there is an unknown device, download flashtool 0.3.0.0 (it contains the 2.3.3 adb and flash drivers)
1. In Flashmode is an unknown device: Go to flashtool 0.3.0.0 folder then to drivers and install the exe file you find there
2. After turning on there is an unknown device: extract the x10 drivers archive in the drivers subfolder of flashtool 0.3.0.0 and search manually in that folder for the drivers of the unkown device, then they should be installed.
3. Now check again like I described it above the line for unknown devices, if you can't see them now, try again to unlock your bl.
Click to expand...
Click to collapse
7.be sure u have disabled all antivirus services and turn off ur firewall
8.close flashtool before starting to unlock BL
9.kill all processes named adb.exe by ur task manager "ctrl+alt+delete/start task manager/processes/sort by name/then kill adb.exe"
DURING UNLOCKING PROCEDURE
10.IF messages like "killing adb server..error" appears. pls make sure again u did points 6+7+8.
11.U HAVE TO WAIT A while and phone reboots in the process
DURING FLASHING Doom kernel v4.0 or stock
12. if messages like start flashing then abort flashing -with GB ready FLASHTOOL- or sending loader then along wait after flashing kernel .sin-with older FLASHTOOL - then u haven't probably unlocked ur BL . SO PLS don't bother ur self trying to re flash the kernel and check if ur bootloader is still locked
DID U follow steps+cautions?!!
13.to CHECK the status of ur bootloader pls download s1tool from
press "DO job" then connect ur phone in flash mode -green LED light-.
14. IF ur phone is UNLOCKED then status should be like this:
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A033"
NOTICE THE LOWER CASE letter "r" in "RUNNING S1_EROM VER "r8A033""
14.IF it isn't unlocked u would see UPPER CASE "R" like "R8A033" then try again with more caution then refer back to the thread
AFTER COMPLETEING THE PROCEDURE
15.of course u will see "XPERIA" Logo instead of "SONY ERICSSON" what Doomkernel u chose -v04b or v04-FS-.
16. 'SE' logo stll appears in cases:
1.u still on ur old kernel.
Or
2.u flashed Doom's stock kernel for unlocked bl.
Hi, very good for scared ones to have that thread. One suggestion, I added it to my how-to just now, but it's not needed to update pccp or seus, you only need the 2.3.3 adb/flash drivers. I have uploaded a file which only contains the drivers and explained in the third post of my how-to how to check if a driver update is needed and how to make it. Much easier as use the crappy se programs^^
Regards,
L
romasalah said:
15.of course u will see "XPERIA" Logo instead of "SONY ERICSSON" what ever the kernel u chose -stock or v4.0-.
Click to expand...
Click to collapse
You won't on stock.
Maybe we need to clear up the confusion in the OP when S1tool says SEMC SIMLOCK CERTIFICATE?
Sent from my X10 using XDA App
Blagus said:
You won't on stock.
Click to expand...
Click to collapse
FIXED..STOCK will show "SE" as usual
ballubas said:
Maybe we need to clear up the confusion in the OP when S1tool says SEMC SIMLOCK CERTIFICATE?
Sent from my X10 using XDA App
Click to expand...
Click to collapse
sorry don't get it..did u meant when sim is locked?
my s1tool is :
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1241-1846_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO:
SEMC SIMLOCK CERTIFICATE
Elapsed:6 secs.
and it's unlocked
there has been people asking what does "SEMC SIMLOCK CERTIFICATE" mean, maybe in the op it can be said that its ok to un lock the bootloader with "SEMC SIMLOCK CERTIFICATE"
romasalah said:
sorry don't get it..did u meant when sim is locked?
my s1tool is :
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1241-1846_R1C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO:
SEMC SIMLOCK CERTIFICATE
Elapsed:6 secs.
and it's unlocked
Click to expand...
Click to collapse
ballubas said:
there has been people asking what does "SEMC SIMLOCK CERTIFICATE" mean, maybe in the op it can be said that its ok to un lock the bootloader with "SEMC SIMLOCK CERTIFICATE"
Click to expand...
Click to collapse
This is the information I have been trying to confirm. So I go ahead and use semc bat file? Seems like so much you have to look out for.
Sent from my x10i using XDA App
i hope this is not the start of endless threads of how too's. 9Lucas5 has created one already for members. surely any new information can be added there.
http://forum.xda-developers.com/showthread.php?t=1254087
this is what im trying to clear up!
lunarjetman1 said:
This is the information I have been trying to confirm. So I go ahead and use semc bat file? Seems like so much you have to look out for.
Sent from my x10i using XDA App
Click to expand...
Click to collapse
lunarjetman1 said:
This is the information I have been trying to confirm. So I go ahead and use semc bat file? Seems like so much you have to look out for.
Sent from my x10i using XDA App
Click to expand...
Click to collapse
ballubas said:
there has been people asking what does "SEMC SIMLOCK CERTIFICATE" mean, maybe in the op it can be said that its ok to un lock the bootloader with "SEMC SIMLOCK CERTIFICATE"
Click to expand...
Click to collapse
MY experience in SIMunlock isn't so much but i added some hints to the thread if there is some evident additions pls post them....
there's a member who used "qsd8250_setool2" for locked sim and had no signal then used "qsd8250_semc' and it worked and restored his signal back
about what S1TOOL SAYS:
Mine displayed: SEMC SIMLOCK CERTIFICATE
and i could unlock it
Some others display:NOT RECOGNIZED SIMLOCK CERTIFICATE
can't assure that they can't unlock bl... I say try to unlock ur SIM first
And...As i said previously,there r member who unlocked his bl with locked SIM
romasalah said:
there's a member who used "qsd8250_setool2" for locked sim and had no signal then used "qsd8250_semc' and it worked and restored his signal back
Click to expand...
Click to collapse
Me too!!
I actually got cought in the confusion of "SEMC SIMLOCK CERTIFICATE"; I thought that it meant that my phone was unlocked using setool2 (because my phone was already unlocked when I bought it, and I don't know how it was unlocked). Anyways with "qsd8250_setool2" I lost the signal and with "qsd8250_semc" I was able to restore it, but only thanks to that post that you mention, because otherwise I would have panic and would't be able to do anything else
I checked my phone with the s1 tool and it showed lower case r, but at boot it still show the Sony Ericsson text Is anyone aware of this? Is my phone bootloader unlocked?
wizoxt said:
I checked my phone with the s1 tool and it showed lower case r, but at boot it still show the Sony Ericsson text Is anyone aware of this? Is my phone bootloader unlocked?
Click to expand...
Click to collapse
It is indeed, you just haven't flashed a 'real' custom kernel yet.
wizoxt said:
I checked my phone with the s1 tool and it showed lower case r, but at boot it still show the Sony Ericsson text Is anyone aware of this? Is my phone bootloader unlocked?
Click to expand...
Click to collapse
If you haven't flashed any custom kernel for unlocked bl yet, your bl is unlocked, but the se kernel is still used --> se logo appears. If you want to disappear the se logo, flash custom kernel for unlocked bl.
Regards,
L
9Lukas5 said:
If you haven't flashed any custom kernel for unlocked bl yet, your bl is unlocked, but the se kernel is still used --> se logo appears. If you want to disappear the se logo, flash custom kernel for unlocked bl.
Regards,
L
Click to expand...
Click to collapse
aR_ChRiS said:
It is indeed, you just haven't flashed a 'real' custom kernel yet.
Click to expand...
Click to collapse
Ahh.. Forgot to mention that I did flashed the DoomLord's custom kernel for bootloader unlocked.. But the situation remain unchanged I was just curious if my BL is unlocked properly
try reflashing the kernel and have an eye on it it gives you any security error, if yes, your bl isn't unlocked. Or test with the s1 tool from the laser, if you can't see a lower case letter, bl isn't unlocked yet.
Regards,
L
wizoxt said:
Ahh.. Forgot to mention that I did flashed the DoomLord's custom kernel for bootloader unlocked.. But the situation remain unchanged I was just curious if my BL is unlocked properly
Click to expand...
Click to collapse
Make sure u flashed the kernel properly....Doom had posted a stock kernel for Unlocked BL ,don't use it. Did u followed links on Lukas's thread?!!
Sent from my X10i using XDA App
romasalah said:
Make sure u flashed the kernel properly....Doom had posted a stock kernel for Unlocked BL ,don't use it. Did u followed links on Lukas's thread?!!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
why shoudn't he use the stock kernel from doom?
9Lukas5 said:
why shoudn't he use the stock kernel from doom?
Click to expand...
Click to collapse
No problem to use STOCK kernel
The other day I unlocked bootloader and did flash the phone on ST18i_4.1.A.0.562_ (1252-5332) using the flashtool and after that I returned the phone to (ST18) _4.0.2.A.0.42_CE.ftf and he turned on normaly,after that problem occurred when i update over wireless to 2.3.6 and then more would not turn on, every time I tried to light a single LED is lighted up, and nothing more, I tried many times to do update with several firmwares and publish flastool each time it is completed but the phone still will not start and then I tried to unlock the bootloader and then try the update again on (ST18) _4.0.2.A.0.42_CE.ftf and the problem is that we s1 tool throws the following message when I click restore:
Welcome to S1 tool.
NEXT TO CONNECT PHONES
X10 Xperia, Xperia Mini E10, E15 Xperia X8, U20 Xperia Mini Pro
LT15 Xperia ARC, NEO MT15 Xperia, Xperia PLAY R800
PRESS AND HOLD "BACK" BUTTON ...
PLEASE ATTACH Turned OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0098/00B3"
LOADER VERSION: "R4A069"
FAILED TO FIND RESOURCE
look here, http://forum.xda-developers.com/showthread.php?t=1492805 it might help
Try s1tool that what I used to unbrick my ray
Sent from my ST18i using xda premium
You bricked ur phone
If you don't know how to solve this i think you have to go to easy way.
Wotan server.
Download wotan client. And register an account they will give u a free credit.
Then open wotan server will say connect phone u have to click volume down while connecting usb to ur Xperia Ray then will detect your phone..
Then u can chose which country and which rom you want to install..
Thank you all for such quick answers and I just solved the problem so I took off a new S1 tool that did restore successfully and after that I am very surprised that the phone is turned on first, I guess that the problem was that I did update directly from the phone via Wireless but with the unlocked bootloader
zoransc said:
Thank you all for such quick answers and I just solved the problem so I took off a new S1 tool that did restore successfully and after that I am very surprised that the phone is turned on first, I guess that the problem was that I did update directly from the phone via Wireless but with the unlocked bootloader
Click to expand...
Click to collapse
yeah, u are right ... but how did u unlocked ur phone ? Via website of sony or with s1tool and testpoint?
With S1 tool
so meaning that if u unlock ur bootloader using the test point method, u still cant update ota?
Well it would not be able to answer with certainty
fota brick?
from what i see, i think u unlocked ur bootloader, then did a OTA. haha i did that the other day and i was freaking out. dont worry, heres ur solution
go here
http://forum.xda-developers.com/showthread.php?t=1126358
in here, theres a version of flashtools that can fix ur brick. its easy
the multiupload link is dead, but theres a mirror on page 15
u must thank this person for reuploading it shprakash
www.mediafire.com/?h2dwrz18mujx765
good luck
Hi, so first i'd like to express my thanks for the whole xda community, helped me before and hopefully it will help me again.
I recently got Xperia X10i from a relative for free but it's locked in Orange, France.
I live in another country and as such will need to use a different network. After scooping around, searching the xda forum high and low on how to unlock it I came up empty handed so to say.
Now the question is can sim unlock be done on this phone (will post full details lower) free or under a fiver? Since i got it for free and I already have a phone I use I'm not willing to pay more to unlock it, I'd rather sell it dirt cheap or something. Please not I am also willing to test almost anything with it since it won't bother me much if it breaks.
Details on the phone and what I did with it so far:
Relevant text behind battery:
Sony Ericsson X10i
Type: AAAB
FCC ID: CB5
IC: 4170B-A3880056 10W19
SI: 1232-4310
Imei: 359419036396884
Tests I did so far:
It had android 1.6, so i updated it first using pc compannion to 2.3 > worked
After that rooted it using flashtool 0.7 > worked
Tried unlocking bootloaed with same version > error (seems it's a software error in this latest version)
Downgraded to a generic 2.1 using flashtool 0.6.9 > worked
Rooted again with flashtool > worked
Using the BL unlock plugin i get a WARN CANC error
Using the S1 tool Identify i get the following:
Code:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.1.A.0.435
CUSTOM VERSION: 1232-9897_R8B
FILESYSTEM VERSION: WORLD-1-4-8_2.1.A.0.435
SERIAL NO: CB511JPTCZ
SEMC SIMLOCK CERTIFICATE
Elapsed:18 secs.
In the service menu (which by the way was not accesible through the *#*# command on the phone but i accesed it through a apk here on xda installed through flashtool) under Service Info > Configuration the Rooting Status line is not present.
I remember reading somewhere in a youtube guide that some models of X10 can get sometimes sim unlocked when they are being bootloader unlocked.
Also i read somewhere that if the S1 tool shows RUNNING S1_EROM VER "r8A033" with a lower R then the bootloader is unlocked already?
I've been reading a bit about the setool2 utility and the test point things but that looks like hard short circuiting something and before doing that I'd like to make sure there is no other way.
If you need any other info i'll be happy to oblige and thanks for any helpful comment.
P.S. Forgot to mention a couple of things:
I never tried to install a full custom ROM but at some point I did install Doomlord's custom kernel with some recovery thing.
Also under Service Info > SIN lock > [x] Network 0
and the rest are with []
So ... can anyone offer a good advice? I've been reading up a bit and seems it can be sim unlocked even if it has 0 tries left with a paid software. Some opinions about which service offers most reliability and low cost?
yeah im too on t-mobile right now and want to unlock my sim, is there any chance to do that?
x10 unlock
any luck with the unlock process?
I have flashed my neo MT15_4.1.B.0.431_Global.ftf file.
And now it says emergency call only-No SIM card.
SIM has no problem in other phones.
What happened to it.
And it doesn't enter fastboot
Please help me
Problem !!!
I have the same problem now. Please someone help me!!!
I am so sad that I cannot find nobody here helps me...
http://forum.xda-developers.com/showthread.php?p=26472385
Sent from my MT11i using XDA
Which flashtool you used to flash that ftf?
---------- Post added at 10:06 PM ---------- Previous post was at 09:45 PM ----------
mpiekp said:
http://forum.xda-developers.com/showthread.php?p=26472385
Click to expand...
Click to collapse
that guy messed up using wotans unlock tool.
This sounds like a similar problem, but I have seen few people so far messed up their phones only by flashing clean ftf.
In latest(or at least in few latest version) flashtool version you can see
WARN - This file is ignored : simlock.ta
Click to expand...
Click to collapse
not sure if that file was flashed before or not, but it sure didn't give you warning.
One guy bricked his Xperia S messing with .ta file, and that's why falshtool guys made this ignore, which is why I think in before version it was flashed.
.62 and .562 have same simlock.ta file, while the one from .431 differs. hm, but then again .42 also have different file. *
Maybe I'm talking sh*t but I bet my ass that those who have this problem used older version of flashtool.
Also those people who got this problem also get changed root status in service menu, those who had yes, now they have no.
EDIT: here: http://forum.xda-developers.com/showpost.php?p=26761620&postcount=140 I see OP used 0.8 flashtool, so my theory doesn't flow don't know what could be wrong here..
EDIT2: looks that I can only find users with Neo which have this problem
EDIT3:* hm ok, .62 and .562 are for same region, while .431 and .42 are for different regions. Lol, with each edit, I'm loosing my theory but interesting to research
(((
Madfysh said:
Which flashtool you used to flash that ftf?
---------- Post added at 10:06 PM ---------- Previous post was at 09:45 PM ----------
that guy messed up using wotans unlock tool.
This sounds like a similar problem, but I have seen few people so far messed up their phones only by flashing clean ftf.
In latest(or at least in few latest version) flashtool version you can see
not sure if that file was flashed before or not, but it sure didn't give you warning.
One guy bricked his Xperia S messing with .ta file, and that's why falshtool guys made this ignore, which is why I think in before version it was flashed.
.62 and .562 have same simlock.ta file, while the one from .431 differs. hm, but then again .42 also have different file. *
Maybe I'm talking sh*t but I bet my ass that those who have this problem used older version of flashtool.
Also those people who got this problem also get changed root status in service menu, those who had yes, now they have no.
EDIT: here: http://forum.xda-developers.com/showpost.php?p=26761620&postcount=140 I see OP used 0.8 flashtool, so my theory doesn't flow don't know what could be wrong here..
EDIT2: looks that I can only find users with Neo which have this problem
EDIT3:* hm ok, .62 and .562 are for same region, while .431 and .42 are for different regions. Lol, with each edit, I'm loosing my theory but interesting to research
Click to expand...
Click to collapse
i have flashed ICS as true 3 times but at first, i havent changed my pc settings to english. and tried to install like that. now i flash ICS as right ways and ICS works on mobile but mobile simlocked, someone wrote something about s1tool but i didnt understand how to use it
mpiekp said:
http://forum.xda-developers.com/showthread.php?p=26472385
Sent from my MT11i using XDA
Click to expand...
Click to collapse
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_4.0.2.A.0.62
CUSTOM VERSION: 1246-9107_R3D
FILESYSTEM VERSION: WORLD-1-8_4.0.2.A.0.62
SERIAL NO: BX902GFU94
SEMC SIMLOCK CERTIFICATE
Elapsed:9 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
supported phone was not detected
Elapsed:72 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A069"
RESTORED
Elapsed:5 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R9A021"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): MT15i
SOFTWARE VERSION: 1242-4466_4.0.2.A.0.62
CUSTOM VERSION: 1246-9107_R3D
FILESYSTEM VERSION: WORLD-1-8_4.0.2.A.0.62
SERIAL NO: BX902GFU94
SEMC SIMLOCK CERTIFICATE
Elapsed:7 secs.
I did everything the link you've given.It says "RESTORED".
But when I put sim again.The problem still exists.
-NO SIM
-EMERGENCY CALL
-NO FAST BOOT
-BOOTLOADER UNLOCK ALLOWED: NO
Ok so that confirms, you've written s new ta. Your going to need to repair that, there is s package here for all Xperia to revert ta to default, search for fota unbrick. Try that
Sent from my MT11i using XDA
mpiekp said:
Ok so that confirms, you've written s new ta. Your going to need to repair that, there is s package here for all Xperia to revert ta to default, search for fota unbrick. Try that
Sent from my MT11i using XDA
Click to expand...
Click to collapse
You, my brother,
It seems you will be the man who will solve my problem.
I am searching for fota unbrick.
Thank you so much brother...
(by the way my phone is not S, it is "neo" )
Same problem.NO SIM...****
04/038/2012 01:38:21 - INFO - <- This level is successfully initialized
04/038/2012 01:38:41 - ERROR - Cannot identify your device. Found MT15 while expecting X10, E10, U20 or E15 (read from ro.product.model from build.prop)
04/038/2012 01:38:41 - INFO - Selecting from user input
04/038/2012 01:38:45 - INFO - Connected device : X10
04/038/2012 01:38:46 - INFO - Installed version of busybox :
04/039/2012 01:39:26 - INFO - Preparing files for flashing
04/039/2012 01:39:27 - INFO - Searching Xperia....
04/039/2012 01:39:28 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&35BD6F85&0&3
04/039/2012 01:39:28 - INFO - Start Flashing
04/039/2012 01:39:28 - INFO - VER="R9A021";DATE="20110128";TIME="11:49:00";
04/039/2012 01:39:28 - INFO - Flashing loader
04/039/2012 01:39:29 - INFO - PROT_VER="03";DATE="20110217";TIME="15:47:00";VER="R4A066";CXC="1234-5769";TYPE="S1_LOADER";UNIQUE_DEV_ID="1D703660140A5F0B251681D7A0C3C21F6F01123D";SEC_LOCK_STATUS="LOCKED";OTP_DATA="4B6D7100471404C81508042800B3E8D3B001002000000000";IMEI="**************";AID_VERSION="0004";EROM_AID="0001";LOADER_AID="0001";SW_AID="0001";CUST_AID="0001";SIM_LOCK_AID="0001";HWCONF_AID="0001";PROD_ID="0001";ACTIVE_LOADER_AID="0001";MEMDEVS="02:00:002C:00B3:0000:00002000:00020000:00000800:00000040";MAN_ID="002C";DEV_ID="00B3";SIN_VER="0001";AID_TAMP="NOT_TAMPERED";MAX_PKT_SZ="00010000";AUTH_LEVEL="NONE";AUTH_MET="0001";CARD_PRESENT="NO";LOADER_ROOT="S1_Loader_Root_773f";EROM_ROOT="S1_EROM_Root_d601";SW_ROOT="S1_SW_Root_883f";CUST_ROOT="S1_Cust_Root_9603";SIM_LOCK_ROOT="S1_SL_Root_c422";HW_CONF_ROOT="S1_HWConf_Root_08af";BIM_STATE="DISABLED";
04/039/2012 01:39:29 - INFO - Flashing preset
04/039/2012 01:39:29 - INFO - TA value : [00, 00, 08, FD, 00, 00, 00, 02, 00, 00, ]
04/039/2012 01:39:29 - INFO - Flashing finished.
04/039/2012 01:39:29 - INFO - Now unplug the device and power it on
04/039/2012 01:39:29 - INFO - Then go to application settings
04/039/2012 01:39:29 - INFO - turn on Unknown Sources and Debugging
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
FOTA cant
sercansaim said:
You, my brother,
It seems you will be the man who will solve my problem.
I am searching for fota unbrick.
Thank you so much brother...
(by the way my phone is not S, it is "neo" )
Click to expand...
Click to collapse
it cant solved simlock problem, i guess i have to wait for update for me or send it off to the service
mpiekp said:
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
Click to expand...
Click to collapse
During all of the processes, I never used test point. Software (S1tool, FOTA unbrick flasher etc) never wanted me to use test point.I only pressed back and connected USB.
Can you explain in which step I should use Test Point?
What I did:
-I was on Gingerbread.
-My bootloader was unlocked
-Pc system settings were TURKISH
-I flashed the phone using flashtool.I flashed "MT15i_4.1.B.0.431.ftf" file.
-In flashing screen, there was only simlock.ta
(I was beginner on flashing, ı didn't know that ı should change pc language to English)
-I flashed the phone.
-Phone booted with my old Gingerbread(Not ICS)
-I found that my phone says "NO SIM-EMERGENCY CALLS ONLY"
-I ve tried so many Sım Cards(All of them have same problem)
(I am sure phone has no Hardware problem.I dedects sim but something blocks it)
-I made restore using S1tool
-I flashed generic GB
-I made official ICS update via SUS
But no solution.My phone has the same error.
And also bootloader unlock allowed: NO
PS:When I try to flash all of the ftf files, during flashing process, I see:
warn the file is ignored simlock.ta
It flashes all of the other components.But doesn't simlock.ta files.
I hope you will help me.Because I need my phone...
mpiekp said:
Ok sorry, but you are going to need to have spend to fix it. If your ok with the test point method, you can use omnius server or pm jinx13, who can replace it remotely.
Cost is around €15.
If you use omnius server select the repair S1boot option, it will remove simlock and restore fastboot
Sent from my MT11i using XDA
Click to expand...
Click to collapse
What is the difference between;
*repair S1boot
*unlock bootloader
Repair puts back to how it was.
Unlock unlocks, but doesn't touch sim lock, therefore restoring should remove any changes you've made.
For sim lock you need omnius or setool and Card so it's s paid service.
Can I ask how did you unlock in the first place, as only a few have been locked by flashing 404, trying to find a link
Sent from my MT11i using XDA
mpiekp said:
Repair puts back to how it was.
Unlock unlocks, but doesn't touch sim lock, therefore restoring should remove any changes you've made.
For sim lock you need omnius or setool and Card so it's s paid service.
Can I ask how did you unlock in the first place, as only a few have been locked by flashing 404, trying to find a link
Sent from my MT11i using XDA
Click to expand...
Click to collapse
I dialed *#*#7378423#*#*
Then ı saw. "bootlader unlock allowed: YES "
Then ı unlocked it via official method http://unlockbootloader.sonymobile.com/
After that, it was unlocked.I was able to enter fastboot, install kernels etc...
But now my problem is, ı have so many options.Iwill buy credit from omnius, thats OK.
* Should I unlock bootlader?
* Should I unlock SIM?
* Should I repair S1 boot?
My phone always says no-sım
And bootloader unlock allowed "no"
Many people are saying that, ıf you unlock bootloader, you will unlock sim lock too.
Is this true???
Use the repair s1boot, it will fix both
Sent from my MT11i using XDA
mpiekp said:
Use the repair s1boot, it will fix both
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Ok. You are right. But it is still risky for me.
I don't want to waste my 15 €, that is why I am always asking questions to make sure about it.
At that point, I want to ask : It will repair my boot.But how? How does it know my bootloader and simlock status before it used to be?
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
mahmoudsalem91 said:
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
Click to expand...
Click to collapse
Try going back to stock ROM without root.... if you sim unlocked the phone then you should have the code.. use the same code and it might unlock.... I unlocked my phone by calling my service provider and asking them(AT&T, USA) .. they unlock phone after 3 months of use.... so try calling your service provider also...
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Try going back to stock ROM without root.... if you sim unlocked the phone then you should have the code.. use the same code and it might unlock.... I unlocked my phone by calling my service provider and asking them(AT&T, USA) .. they unlock phone after 3 months of use.... so try calling your service provider also...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
thanks for your replay. I didnt unlocked the phone using code. And it doesnt ask me anywhere to enter any unlock code so i dont think i would need to call my service network to help me in anything. And i did also back to stock rom ( 2.3 ) and i still have the problem!!
mahmoudsalem91 said:
thanks for your replay. I didnt unlocked the phone using code. And it doesnt ask me anywhere to enter any unlock code so i dont think i would need to call my service network to help me in anything. And i did also back to stock rom ( 2.3 ) and i still have the problem!!
Click to expand...
Click to collapse
So you unlocked sim or unlocked bootloader ? If its sim unlock then Call your service provider and ask for unlock code if the phone is older than 3 months.. they will give you some numbers... if you get and if you enter them you should be good to go... if its not unlocked then this problems, should not come in the first place...
Sent from my Transformer TF101 using xda app-developers app
mahmoudsalem91 said:
hey guys, hope anyone can help me with this problem...
my phone is X10 and it was locked to 3 sweden ... i unlocked it using ominus. it worked very good for like 3 weeks. after that i wanted to instal a rom but it requires me to unlock the bootloader.. i did that using x10_bootloader_unlock_011 program. ( i forget where i downloaded it) . then after that i installed the rom succesfuly and it worked fine... now i dont get network and my phone doesnt read my sim card!!
when i remove the sim card from the phone, it says on the lockscreen that there is no sim card inserted. but when my sim card inside the phone it doesnt say that on the lockscreen.. i changed the baseband on my phone to 2 deffrent basebands and it still the same problem.. i put my sim card in another phone and it works fine but when i insert any other sim in my x10 its still says the same thing and it doesnt change anything..
any help plz??
thanks
Click to expand...
Click to collapse
did you check if your bootloader is unlockable by using s1tool before trying to do so.
Its given here: http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
udupa82 said:
So you unlocked sim or unlocked bootloader ? If its sim unlock then Call your service provider and ask for unlock code if the phone is older than 3 months.. they will give you some numbers... if you get and if you enter them you should be good to go... if its not unlocked then this problems, should not come in the first place...
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
there is nothing wrong with my sim card. i tried putting more than one sim in the x10 and its the same problem. so its from the phone... and its like that with unlocked and locked BL.
THeLogiC said:
did you check if your bootloader is unlockable by using s1tool before trying to do so.
Its given here: http://forum.xda-developers.com/showthread.php?p=19685019#post19685019
Click to expand...
Click to collapse
i tried that and it gave me this in s1tool
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.0.1.B.0.19
CUSTOM VERSION: 1234-4752_R15B
FILESYSTEM VERSION: HUTCH-1-4-8_2.1.A.0.435
SERIAL NO: ( i deleted that )
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:27 secs.
any help???
mahmoudsalem91 said:
there is nothing wrong with my sim card. i tried putting more than one sim in the x10 and its the same problem. so its from the phone... and its like that with unlocked and locked BL.
i tried that and it gave me this in s1tool
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.0.1.B.0.19
CUSTOM VERSION: 1234-4752_R15B
FILESYSTEM VERSION: HUTCH-1-4-8_2.1.A.0.435
SERIAL NO: ( i deleted that )
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:27 secs.
any help???
Click to expand...
Click to collapse
I think thats the problem
You network unlocked your phone using omnius so if you unlock your bootloader you lose your network .
As far as i know you need to re unlock your network using setool and then try to unlock your bootloader
Sent from my X10
THeLogiC said:
I think thats the problem
You network unlocked your phone using omnius so if you unlock your bootloader you lose your network .
As far as i know you need to re unlock your network using setool and then try to unlock your bootloader
Sent from my X10
Click to expand...
Click to collapse
ok but it doesnt say anything on the phone that my network is locked!!
i just tried something... on the phone screenlock . i pressed ( menu - back - menu - back - back- menu - back - menu - menu - back ) and then i went into service info and then sim lock and it how me question marks in front of everything. it supposd to be 5's...
u sure that if i used s1tool it would fix this problem?
thanks
mahmoudsalem91 said:
ok but it doesnt say anything on the phone that my network is locked!!
i just tried something... on the phone screenlock . i pressed ( menu - back - menu - back - back- menu - back - menu - menu - back ) and then i went into service info and then sim lock and it how me question marks in front of everything. it supposd to be 5's...
u sure that if i used s1tool it would fix this problem?
thanks
Click to expand...
Click to collapse
No the problem in reality is this:
You can only unlock your bootloader successfully if your phone is network unlocked from company or network unlocked from setool. If you try to unlock your bootloader if either of above conditions aren't met, you lose your network .
S1tool just shows your sim certificate. If it is semc or setool sim certificate you can unlock bootloader without problem. But as u see your sim certificate is not that so you lost network.
The solution is to re lock bootloader using flashtool.
Re unlock your network using setool ( i reallly dont know how ) .
Then try unlocking bootloader.
This is what i have heard.
Sent from my X10
THeLogiC said:
No the problem in reality is this:
You can only unlock your bootloader successfully if your phone is network unlocked from company or network unlocked from setool. If you try to unlock your bootloader if either of above conditions aren't met, you lose your network .
S1tool just shows your sim certificate. If it is semc or setool sim certificate you can unlock bootloader without problem. But as u see your sim certificate is not that so you lost network.
The solution is to re lock bootloader using flashtool.
Re unlock your network using setool ( i reallly dont know how ) .
Then try unlocking bootloader.
This is what i have heard.
Sent from my X10
Click to expand...
Click to collapse
ok good, i just relocked BL but i just checked in the ( about phone ) and i sow unknown baseband!! i just flashed baseband 58 now and its stuck on SE screen.. what is the baseband for the last android update on x10i?
and for setool, if i will use it, i will have to buy box. else, the program wont start.. so the only way is unlocking it by Ominus and keep the BL locked... all i want now is just be able to use the phone!! its really sucks without android in my life lol
again thanks for your replays, it really means lots to me
phone info by Ominus ( the program i used to unlock the phone with )
22:31:57 . The action name is 'Identification'
22:31:57 Selected phone type: Xperia™ X10
22:31:57 Selected connection method: USB EROM
22:31:57 i Instructions
22:31:57 i 1. Make sure the phone battery is charged to at least 50%.
22:31:57 i 2. Switch off the phone!
22:31:57 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:31:57 i 4. Press and hold the return back button, then connect the cable to the phone!
22:31:57 . The action started waiting for the user
22:32:18 . The action finished waiting for the user
22:32:18 Connecting via SEMC USB Flash Device (USB1)...
22:32:18 Device driver version: 3.0.0.0
22:32:18 Detected chipset: QSD8250
22:32:18 Boot mode: EROM
22:32:18 EROM version: 1226-2253 R8A033
22:32:18 IMEI: 0125900-------
22:32:18 Device ID: 2C1EC52657B7CD4B02ADE7033B9E9D9AB2A66233
22:32:18 Minimum loader AID: 0001
22:32:18 Minimum software AID: 0001
22:32:18 Minimum EROM AID: 0001
22:32:18 Minimum customization AID: 0001
22:32:18 Minimum simlock AID: 0001
22:32:18 Serial number: ---------
22:32:18 Color: Red SEMC
22:32:18 Phone model (from TA): X10i
22:32:18 Current CXC (from TA): 1243-4429_2.1.A.0.435
22:32:18 Current CDA (from TA): 1234-4752_R15B
22:32:18 Current FS (from TA): HUTCH-1-4-8_2.1.A.0.435
22:32:18 i The phone is not locked to a network.
22:32:18 i Simlock origin: Omnius
22:32:18 Sending loader...
22:32:18 Waiting for loader response...
22:32:20 Flash chip ID: 002C-00B3
22:32:20 Memory card present: 8GB
22:32:20 Turning off the phone...
22:32:22 i Please disconnect battery and cable from the phone!
22:32:22 s Successfully done.
and i just install android 2.1-update and the baseband now working 2.1.54
anymore info?
mahmoudsalem91 said:
phone info by Ominus ( the program i used to unlock the phone with )
22:31:57 . The action name is 'Identification'
22:31:57 Selected phone type: Xperia™ X10
22:31:57 Selected connection method: USB EROM
22:31:57 i Instructions
22:31:57 i 1. Make sure the phone battery is charged to at least 50%.
22:31:57 i 2. Switch off the phone!
22:31:57 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:31:57 i 4. Press and hold the return back button, then connect the cable to the phone!
22:31:57 . The action started waiting for the user
22:32:18 . The action finished waiting for the user
22:32:18 Connecting via SEMC USB Flash Device (USB1)...
22:32:18 Device driver version: 3.0.0.0
22:32:18 Detected chipset: QSD8250
22:32:18 Boot mode: EROM
22:32:18 EROM version: 1226-2253 R8A033
22:32:18 IMEI: 0125900-------
22:32:18 Device ID: 2C1EC52657B7CD4B02ADE7033B9E9D9AB2A66233
22:32:18 Minimum loader AID: 0001
22:32:18 Minimum software AID: 0001
22:32:18 Minimum EROM AID: 0001
22:32:18 Minimum customization AID: 0001
22:32:18 Minimum simlock AID: 0001
22:32:18 Serial number: ---------
22:32:18 Color: Red SEMC
22:32:18 Phone model (from TA): X10i
22:32:18 Current CXC (from TA): 1243-4429_2.1.A.0.435
22:32:18 Current CDA (from TA): 1234-4752_R15B
22:32:18 Current FS (from TA): HUTCH-1-4-8_2.1.A.0.435
22:32:18 i The phone is not locked to a network.
22:32:18 i Simlock origin: Omnius
22:32:18 Sending loader...
22:32:18 Waiting for loader response...
22:32:20 Flash chip ID: 002C-00B3
22:32:20 Memory card present: 8GB
22:32:20 Turning off the phone...
22:32:22 i Please disconnect battery and cable from the phone!
22:32:22 s Successfully done.
and i just install android 2.1-update and the baseband now working 2.1.54
anymore info?
Click to expand...
Click to collapse
So it's working now??
Sent from my X10
THeLogiC said:
So it's working now??
Sent from my X10
Click to expand...
Click to collapse
No its not working. Just wanted to show u what I get about sim card when I use s1tool and ominus .. so can u help ? Plz!!!!
Sent from my X10 using XDA
wanted to add screenshots to what i have,,, the screenshots was taken while sim inside phone..
Use 2.1.71 baseband
Sent from my X10s using xda premium
mahmoudsalem91 said:
wanted to add screenshots to what i have,,, the screenshots was taken while sim inside phone..
Click to expand...
Click to collapse
According to ya pic, You have lost ya baseband. Flash 2.1.71 for your 2.3.3 ROM. Baseband affects radio receiver and gsm including mobile signal transmission. And if ya didnt update ya phone officially, baseband 2.1.54 willbe unusable in 2.3.3 and above. 2.1.71 baseband
Or i have 3.0.1.G.0.75 kernel+baseband (which is 2.1.71) ftf link for locked bootloader under my signature newcomer link download thefile, try relock ya bootloader, flash the ftf. And using stock rom to unlock bootloader once again. Ya prob should be solved. Hope helps
Whitefang
whitefang3456 said:
According to ya pic, You have lost ya baseband. Flash 2.1.71 for your 2.3.3 ROM. Baseband affects radio receiver and gsm including mobile signal transmission. And if ya didnt update ya phone officially, baseband 2.1.54 willbe unusable in 2.3.3 and above. 2.1.71 baseband
Or i have 3.0.1.G.0.75 kernel+baseband (which is 2.1.71) ftf link for locked bootloader under my signature newcomer link download thefile, try relock ya bootloader, flash the ftf. And using stock rom to unlock bootloader once again. Ya prob should be solved. Hope helps
Whitefang
Click to expand...
Click to collapse
ok so far so good. the pone doesnt show me insert sim card and it doesnt show me error while searshing for network but it show the msg in the attachment. it show all the networks now but it doesnt connect to any one from them... will it be eather if i unlocked the phone using setool2? coz it show me that when i get the information about the phone using s1tool... thanks
mahmoudsalem91 said:
ok so far so good. the pone doesnt show me insert sim card and it doesnt show me error while searshing for network but it show the msg in the attachment. it show all the networks now but it doesnt connect to any one from them... will it be eather if i unlocked the phone using setool2? coz it show me that when i get the information about the phone using s1tool... thanks
Click to expand...
Click to collapse
Are u sure it's not counter blocked?
Sent from my Xperia X10 using xda premium
wo88les said:
Are u sure it's not counter blocked?
Sent from my Xperia X10 using xda premium
Click to expand...
Click to collapse
i dont know whats that is. the phone was network locked and i unlocked it using Ominus. its like that since i unlocked the bootloader..
if you talking about going into the test menu thing when i press the menu and back botton while im on the lockscreen, then the answer is everything there is with questions marks insted of 5ssss....