st18i after flash hang &restart with simcard &and camera not work. updat with update service but problem not solve. phone not enter in flash mod when hold volume down
Flash with flashtool and ICS 4.0.3 and wipe cache and data (you can find it in XDA)
how to flash? phone not entred in flash mode when hold volume down!!!!
you have cwm? do a factory reset.
if you can boot to flashtool mode, then flash a different kernel and rom.
try press the volume down repeatedly not holding it
Hi,
Please post your question on this thread.
To Moderators:
There must be something to be done here. Thanks!
Related
Hello guys,
I have a problem over here. I want very badly to install the ISC ftf file that is posted here in one of the treads but the problem is that my phone is rooted and Im unable to upgrade using the flashtool methode.
Maybe I'm mistaken the button that has to be pressed or something. When I press vol up is gets in fastboot mode and vol down is flash mode but after pressing that last the phone boots and can not get into the flash mode anymore.
Can someone give a hint?
Thanks in advance
Lucio25m said:
Hello guys,
I have a problem over here. I want very badly to install the ISC ftf file that is posted here in one of the treads but the problem is that my phone is rooted and Im unable to upgrade using the flashtool methode.
Maybe I'm mistaken the button that has to be pressed or something. When I press vol up is gets in fastboot mode and vol down is flash mode but after pressing that last the phone boots and can not get into the flash mode anymore.
Can someone give a hint?
Thanks in advance
Click to expand...
Click to collapse
First copy in flastool/firmwares 4.0.4.firmware files.
Open flastool and push flash and choose flash and then choose flashmode.
Check wipe data,wipe cache,wipe apps logs and no final verification.
Turn off phone and push volum down and conect your phone in computer.When lihgt is green realease button
and wait still flash program is end
sorry for my bad english
I flashed my xperia s with recovery.img and then disconnected the cable. Then i tried turning it on from the power button nothing was displayed on the screen. So how do i boot my xperia s in the recovery mode so that i get an option "wipe data/factory reset"?
Turn on the phone and keep pressing volume up
Sent from my Xperia S using xda premium
or...
bhanujallandhra said:
I flashed my xperia s with recovery.img and then disconnected the cable. Then i tried turning it on from the power button nothing was displayed on the screen. So how do i boot my xperia s in the recovery mode so that i get an option "wipe data/factory reset"?
Click to expand...
Click to collapse
Reboot and as soon as Sony logo appears press the screen a few times (sometimes its better to keep pressing until it appears, to save trying again):good::fingers-crossed:
Still stuck
smallz2k said:
Reboot and as soon as Sony logo appears press the screen a few times (sometimes its better to keep pressing until it appears, to save trying again):good::fingers-crossed:
Click to expand...
Click to collapse
I tried all the methods but none of the above works. as soon as i flash my fone with the recovery image the and disconnect it from the usb cable and try turnin it on. it doesnt turn on. theres no sony logo. Please help what shall i do?? i want to root my fone with stock kernel only dont want to root it by custom roms.
:crying:
bhanujallandhra said:
I flashed my xperia s with recovery.img and then disconnected the cable. Then i tried turning it on from the power button nothing was displayed on the screen. So how do i boot my xperia s in the recovery mode so that i get an option "wipe data/factory reset"?
Click to expand...
Click to collapse
I think this recovery.img was not walid... I did that with my phone too, and nothing appear in screen. U have to flash another kernel (i suggest, the doomlords kernel). After that turn on the phone, and press the volume up, when doomlord logo appears.
hope it helps.
How are you getting on is your phone back on?
Sent from my LT26i using xda premium
---------- Post added at 03:24 PM ---------- Previous post was at 03:19 PM ----------
If you tried the methods above with no joy it obviously isn't installed. With the cwm you are trying is there a .bat file in the download on your computer. If so while your phone is plugged into PC run the bat file and follow onscreen instructions. Then try launching cwm again.If you havnt managed it yet leave a message and I'll find it.
Sent from my LT26i using xda premium
I am posting here as I am facing the same problem.
I have been following this guide to flash my phone with CM10 from ICS stock rom.
h#ttp#://androidlegend.com/xperia-s-update-to-android-4-1-jelly-bean-with-cyanogenmod-10/
I have successfully followed everything done previously, including Unlocking the bootloader, getting root access, installing busybox, using RecoverX to install CWM.
I copied the FXP150-cm-10.1-20121209-UNOFFICIAL-mint.zip to sdcard, is it this that is required to flash to ROM or the boot.img that is inside the zip?
And I am stuck on that part where I have to reboot into recovery mode. I have tried
a) Connecting my phone and opening fastboot mode and then try to keep the vol up pressed to open recovery mode.
b) Without connecting, powering my phone on and pressing volume up. But there is no blue LED
c) Without connecting, powering my phone on and continuously tapping on sony logo. After that Xperia logo.
But I can not enter the recovery mode.
A little guidance please?
Flashing CM needed a seperate kernel. Keep following the instructions to use fastboot to flash the boot.img
Power the phone off. Hold vol + then plug the USB cable in. There should be a blue light.
Poorly written tutorial IMO. Should be flashing kernel first then the rom to save some panic.
I asked the Sony-Support, they say that there is no recovery-mode.(for Xperia U, but they are the "same")
dirtydevil783 said:
I am posting here as I am facing the same problem.
I have been following this guide to flash my phone with CM10 from ICS stock rom.
h#ttp#://androidlegend.com/xperia-s-update-to-android-4-1-jelly-bean-with-cyanogenmod-10/
I have successfully followed everything done previously, including Unlocking the bootloader, getting root access, installing busybox, using RecoverX to install CWM.
I copied the FXP150-cm-10.1-20121209-UNOFFICIAL-mint.zip to sdcard, is it this that is required to flash to ROM or the boot.img that is inside the zip?
And I am stuck on that part where I have to reboot into recovery mode. I have tried
a) Connecting my phone and opening fastboot mode and then try to keep the vol up pressed to open recovery mode.
b) Without connecting, powering my phone on and pressing volume up. But there is no blue LED
c) Without connecting, powering my phone on and continuously tapping on sony logo. After that Xperia logo.
But I can not enter the recovery mode.
A little guidance please?
Click to expand...
Click to collapse
Snowstormzzz said:
Flashing CM needed a seperate kernel. Keep following the instructions to use fastboot to flash the boot.img
Power the phone off. Hold vol + then plug the USB cable in. There should be a blue light.
Poorly written tutorial IMO. Should be flashing kernel first then the rom to save some panic.
Click to expand...
Click to collapse
MasterBolle said:
I asked the Sony-Support, they say that there is no recovery-mode.(for Xperia U, but they are the "same")
Click to expand...
Click to collapse
Guys, dont ask Sony cause stock ROM doesnt have recovery.
If you want to flash CM you must fastboot the boot.img inside the zip file, before that put the ROM into your phone memory, power on the phone and keep pressing vol up, enter into CM recovery and flash rom from phone memory. Wipe before and after.
Agree, stock ROM doesn't have Recovery Mode. When you turn your phone with VOL_UP, nothing happens :cyclops:
bhanujallandhra said:
I flashed my xperia s with recovery.img and then disconnected the cable. Then i tried turning it on from the power button nothing was displayed on the screen. So how do i boot my xperia s in the recovery mode so that i get an option "wipe data/factory reset"?
Click to expand...
Click to collapse
try flashing it again, maybe your first flash had an error.
Met the same problem and here what I did:
-Take off the battery in 10 minutes and put it back
-Plug the charger into the phone and do the logging in CWM steps (press and hold the volumme up, press the power button).
Finally it worked, hope this can help
Hi, i just installed FXP 150 on my Xperia U(ST25a, unlocked BL) and everything was fine until I restored my apps using titanium backup. After a reboot everything started to FC and I went to recovery did a wipe and rebooted. Here is the problem: In the robot animation it started to randomly freeze and it refused to boot up completely, I still can go to recovery but after several wipes and flashes I just don't know what to do.
I also used flashtool to flash stock ICS, It booted once, did a lot of FC's and died... Flashed again FXP 150 using fastboot and recovery...
Do you have any ideas about what is happening to my phone?
Wrong kernel maybe
Most probably you have not flashed the CM kernel. Extract and Flash the "boot.img" in the cm9 zip using flashtool.
To flash a kernel-
1. Turn off phone
2. Open flashtool
3. Click on thunder icon
4. Select fastboot mode
5. Once fastboot toolbar opens up, connect your phone with volume up pressed(blue LED should ight up)
6. Select "flash kernel"
7. Chose the CM boot.img and flash.
Reboot again and when the initial logo appears, keep presseing Vol UP to reach recovery and flash the CM9 ZIP again.
Hope I helped.....
PS- Make sure you have bootloader unlock
Thanks but I already did that, and as stated before I have unlocked BL. I believe that something has gone wrong with the flash...
try this .
make sure you have a way move data to your phone from recovery ( i dont know how to do this i dont have a u only a go with sd)
follow the instructions in post 2
then boot to recovery go to mounts
mount /system , /cashe
format both of them
go back to main cwm screen
advanced
wipe davik
then run fxp flash the rom zip
clear cashe
wipe davik again
reboot and just leave it for 5
Ok, this has gone from bad to pretty messed up... Now the phone won't enter flash mode or fastboot mode(no button combination works!). The only thing that works is the small notification led on top of the phone that goes red every time I charge the phone or I plug it to my PC. Any ideas?
Pull the battery out and put it back after a few secs. Load up a stock Rom on flashtool. Start flash and connect your phone by the flashmode button combination when prompted. This should start flashing
Tapatalked !
if yout try to power on the phone do you get blinking led if you do this means theres not enouh charge so give it 10 mins on charge then do a hard reboot hold (vol+ and power or vol- and power)
then try to enter fastboot or flashboot
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
melvinpetix said:
Help I accidentally flashed a wrong kernel to my xperia SOLA MT27i. It won't turn on now and PC can't detect it either.
Please advise.
Click to expand...
Click to collapse
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
mirost1 said:
I suppose the phone is off now?
If so try: download stock ROM and put it in flashtool/firmware, start flashtool, choose the stock rom with wipe data, vol - and put USB in so you can enter flashtool mode and flash official ROM.
Click to expand...
Click to collapse
I've tried connecting sola to PC but it seems like flashtool can't detect it. Is there other way to connect it to PC so flashtool can detect the device? I already downloaded stock firmware
Still no luck
1) Hold power + vol up until you feel the phone vibrates 3 times.
Quickly hold power down, and shove the USB wire in.
It should detect your phone in flashboot now.
2) Alternatively, after the phone vibrates 3 times, keep a hold on vol up to get it into fastboot. Then flash the correct kernel for the rom you have.
Note that ICS, GB and CM roms all use a different kernel. Make sure you have the right one.
3) Lastly, if your phone's bootloader is still locked, you can just repair using SUS.
Hello, i'm not any kind of expert, but i've tried to install a new kernel [http://forum.xda-developers.com/showthread.php?t=1894463] into my xperia P, with recovery, and now it just wont star! is it bricked? whenever i try to boot it, it just vibrates, and nothing else. am I that dumb to **** up my phone?
Wrong forum. Ask in Questions and Answers or the XPeria Play forum.
firmware
lorenzo.pozza said:
Hello, i'm not any kind of expert, but i've tried to install a new kernel [http://forum.xda-developers.com/showthread.php?t=1894463] into my xperia P, with recovery, and now it just wont star! is it bricked? whenever i try to boot it, it just vibrates, and nothing else. am I that dumb to **** up my phone?
Click to expand...
Click to collapse
Hi, If your phone is hard bricked you can update the firmware through the flash tool.first you download the latest the firmware and put your phone into fastboot mode( press up+power) and connect the usb to the phone from your pc.and you can see the blue colour led blinks. then press the flash iconin the flash tool and select fastboot mode and flash the firmware.
dushyanth o korner said:
Hi, If your phone is hard bricked you can update the firmware through the flash tool.first you download the latest the firmware and put your phone into fastboot mode( press up+power) and connect the usb to the phone from your pc.and you can see the blue colour led blinks. then press the flash iconin the flash tool and select fastboot mode and flash the firmware.
Click to expand...
Click to collapse
Hi just want to say thanks for the Volume Up + Power, 'coz mine just freeze during the CWM Recovery when I pressed the "Choose Backup Format". By the way, what's the difference of "Backup" and "Choose Backup Format"?