[Q] May have bricked vibrant. Newbie here need help! - Vibrant Q&A, Help & Troubleshooting

Hi everyone, I am new to this community. I am a newb and I followed the noob guide to rooting. this my first time flashing a rom. First I used Odin to flash to stock firmware 2.1. Then I flashed the next gen v2 bionix by team whiskey.
This was a week ago. The phone has been running smoothly with no Problems until yesterday it suddenly turned off on me. It doesnt stay on long enough for me to flash back in Odin or for me to even get into recovery menu. It just powers on for few seconds and turn off.
Any suggestions..or Is my phone bricked for good?
By the way it did have voodoo lag fix. I'm not sure if that has anything to do with it I'm not familiar with flashing kernels etc. I didn't flash a new radio or nothing else. I Just installed the rom and the voodoo fix.

Did you charge the battery?

Yes I tried three different batteries that were fully charged. So I kept trying to power it on now it doesn't turn on at all.
Is completely dead no lights ..nothing. Any suggestions ?
And if I have send in to repair what will be the issue and is it worth fixing or getting new phone?

So you can't even get to download mode?
What happens when you have your phone off, hold the volume up button (or however you get into download mode; volume up is all I've ever had to do), and then plug in a USB cable connected to your PC?

you can try jig to get it in download mode
here is the link
forum.xda-developers.com/showthread.php?t=819551

Related

[Q] phone will not turn on after odin

Hey guys, I was using odin to flash back to stock. My GPS died and was going to try to get a replacement before I tried the hardware fix.
I went to flash back to stock using ODIN, it got stuck on modem.bin. After reading a bunch on people getting stuck here, it looked like it was safe to unplug and try again. I unplugged and now my phone will not turn on at all. Simply a black screen... no recovery, no download mode, no battery status when plugged in. Nothing.
I need some ideas here!
Thanks!!!
This worked for me in similar situations: Pull the battery, plug-in the usb cable, do the three-finger thing (or two finger or whatever works with your boot-loader) and then put in the battery and hope.

Telus Vibrant - Really Need Help

Hi,
I've been trying to root this phone and put clockworkmod, then an ics cyanogen rom on it.
I followed the noob guide.
http://forum.xda-developers.com/showthread.php?t=849028
I successfully used odin to put the phone back to a Verizon JFD.
The problem was that it would restart each time I plugged it into USB, I could still use download mode, not recovery.
To try to fix that problem I used:
http://www.mediafire.com/?98662oi9jcszov5
But now each time I connect USB the phone turns off.
I don't know what to do now that I can't get to download mode or recovery, or even connect it by usb..
I've looked at way too many guides today, and I think I've screwed up my phone big time.
Can anyone help me out?
Edit: I was able to get to CM7 and then ICZen 1.8.1 but it hangs during the boot animation. Because I can't get into the download or recovery menus, I cannot fix this issue.

[Q] vibrant boot issue

I have a Vibrant that I believe may have hard bricked when odin crashed/froze during last 10% of install and now the phone wont turn on and boot, go into download mode by means of jig, pressing both vol up and down at the same time as the power button or other various jump start methods, as well as wont go into recovery. I've just ordered a new break out jig and I'm curious to see if it will work for this or like my other jig be ineffective. The Vibrant came to me disassembled, and immediately upon reassembly I experienced booting issues with it. Sometimes it would boot up revealing the home screen before it would shut off and others it would barely flash the first splash before shut off. I'd see similar behavior when I attempted to boot to recovery, but then when ever the phone was in download mode it would stay on. I flashed it several times with odin but it would never really stick. The last couple attempts had shown promise when it would start making it further into the boot process before the attempt when odin froze during the install of the rom and I can only think that now it's hard bricked. Now that my friend has brought me his Fascinate that is showing similar characteristics within his phone, I'm hoping for some help with understanding whats causing these problems. His phone wont boot unless it is plugged in, however it will continue to function after unplugging the charger from phone. That just makes me think of the Vibrant and how it would only stay on in download mode, but the 2 situations could be completely unrelated in the cause of the boot issues, if you can please help.
[email protected] said:
I have a Vibrant that I believe may have hard bricked when odin crashed/froze during last 10% of install and now the phone wont turn on and boot, go into download mode by means of jig, pressing both vol up and down at the same time as the power button or other various jump start methods, as well as wont go into recovery. I've just ordered a new break out jig and I'm curious to see if it will work for this or like my other jig be ineffective. The Vibrant came to me disassembled, and immediately upon reassembly I experienced booting issues with it. Sometimes it would boot up revealing the home screen before it would shut off and others it would barely flash the first splash before shut off. I'd see similar behavior when I attempted to boot to recovery, but then when ever the phone was in download mode it would stay on. I flashed it several times with odin but it would never really stick. The last couple attempts had shown promise when it would start making it further into the boot process before the attempt when odin froze during the install of the rom and I can only think that now it's hard bricked. Now that my friend has brought me his Fascinate that is showing similar characteristics within his phone, I'm hoping for some help with understanding whats causing these problems. His phone wont boot unless it is plugged in, however it will continue to function after unplugging the charger from phone. That just makes me think of the Vibrant and how it would only stay on in download mode, but the 2 situations could be completely unrelated in the cause of the boot issues, if you can please help.
Click to expand...
Click to collapse
I have Jtag solve for Hard brick phone
Please PM me or check out at my signature.

S2 GT-I9100G dead, completely dead!

Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
Try a USB JIG to enter DL mode
Do you get an exclamation mark next to a pc?
Sent from the little guy
try this
vishalbn said:
Hello folks,
I've a friend who's not a Technical person, however, he tried what he shouldn't have and now he has a totally dead S2.
The problems:
1. Phone doesn't switch on, nor does it goes to download or recovery mode - I tried it all.
2. When I connect a charger or usb - It does start showing the battery icon and while connected to the cable, if I turn it on it stays at the Samsung logo forever.
3. Since I don't know how to even get it to download mode, I'm unable to go any further.
What he did:
1. Trying to upgrade to JB, I think he messed up with the kernel by uploading one which may not be compatible as I've heard S2 has different variants. (He loaded Siyah 4.2)
2. Before doing this, he had connected to ODIN and was trying to load the official JB file but it always got stuck on one of the steps and that's when his phone got a bit sick - it would show "Please connect to KIES and try a recovery" kind of message. And this led him to do Step 1, which he shouldn't have.
I read a lot of posts, tried a lot of things but the phone never goes to download mode. And I've no clue how to try anything else?
So experts, I need your help here and I want to know if this phone will start at all? Can we somehow get it to work? If not at home, can the people at Samsung flash it or something?
Please help. Lots of thanks already!
Click to expand...
Click to collapse
try this method
if u have any mini usb cable cut it and peel of the skin and short the the 4th and 5th pin with 300k resistor or 100k*3 resistor and connect to mobile u will directly goto the download mode remove this pin and connect pc in odin mode and flash first with ics rom and if it is success and then try jelly bean try good luck
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
NikoGR said:
I have the same problem.
Today i tried fixing a bricked galaxy s2(yellow triangle with exclamation mark on boot) by reinstalling the stock firmware with odin and a pit file.
During the install i got stuck at NAND write start.So i took the battery out to get out of download mode and put it back in.When i tried going to download mode,it wouldn't start,charge,boot,anything!it's like it's completly dead.
Is there any other way to go to download mode without using a JIG?
Click to expand...
Click to collapse
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
GamingDj said:
Try a USB JIG to enter DL mode
Click to expand...
Click to collapse
Thank you so much!! I wasn't able to get a usb jig but managed to get it online with a quick delivery. It was my first time using a usb jig but it's too simple. I've a working phone with JB in it.
Thanks again!
keithross39 said:
Sorry to say this mate......you shoulda read some threads.....
If you had, you'd have realised.....
1) you start messing with pit files as a LAST resort
2) you NEVER pull a battery during an odin flash
3) when you saw the failure of 'nand write start' there was still the possibility to recover your phone....right up to the point when you pulled the battery.......
So now you have no recovery mode, no download mode and no on screen indication when you plug the charger in.....
Don't bother with the jig.....it's a long shot under the best of circumstances.....
There Is one thing you could try.....
Take the battery out. Press the vol down, power and home keys simultaneously......and WHILE holding the keys.....reinsert the battery....you will probably need help to do it.
It *might* kickstart the phone into download mode.....or.......it might not.
If it fails.....then Samsung warranty repair is realistically your only option.....Don't mention XDA or rooting or custom roms or odin or anything like that. Play dumb....say you were updating with kies, the phone switched off and wouldn't turn on again.......
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
Thanks for you answer!Will a JTAG work?If i can find one?The phone is off the warranty.
The way I see it is that at the moment, you own a paperweight.....so best to *try* the cheaper options first....jtagging being the cheapest......
If that doesn't sort it....you have 2 options.....
1) replace the mainboard
2) buy an entirely new phone.....
Basically whichever option you choose from now on will have *some* financial cost........
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
A 3rd option is to buy a 2nd hand phone with maybe a cracked screen,and use the board from that.
-------------------------------------------
maybe your an iphone expert
------------------------------------------

[Q] am i soft bricked or hard bricked?

Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
goplatinum said:
Hello. I'm new to the forum, and the issue that brought me here as had me fulling my hair out of the last three days.
I'll try my best to make this short as possible. I have (obviously) AT&T Lg Optimus G (E970) that was running 4.0.4. i rooted and unlocked it and flashed a cm 10.1 using TWRP. Yesterday tried to flash a zip for a transparent status bar mod. But the flash resulted in CM getting stuck on the splash screen. So i booted in TWRP recovery mode to restore from a recent backup. In the midst of wiping my rom and going to restore, i guess my phone died (which was weird because it had a substantial charge). Then it would no longer power on, and the only was i could get ANY response was by plugging it on the charger. All i get it the red indicator light. my phone will only turn on when plugged into the computer. from there the only two thing i can do is enter download mode and boot. and when i try to boot, i will get the lg logo for a moment and the the screen cuts out and goes back the the flashing red light.
so I trien the LGNPST method.
i downloaded the auto LGNPST and installed just fine. downloaded teenybin and lg stock bin. i've tried to flash both (put phone into download mode, select the dll and select the bin file). what happens is everything starts off fine, then when it gets to 67% the phone reboots, then goes back to the flashing red indicator light, and a message on LGNPST will pop up saying the phone has been disconnected, and to reconnect to continue. so i'll unplug the phone, plug it back in, and put it in download mode, and hit continue. LGNPST will say complete but the phone will still be just sitting in download mode. and if i unplug it, it's goes back to square one (red flashing indicator light)
EDIT: i was flashing the v11c stock bin. i just flashed the v20j bin and now we're boot looping while plugged in (lg logo for about 2 seconds, shut off, repeat) progress???
SO SO SORRY FOR THE LONG READ. Just trying to give as much info as possible hoping it helps.
My question is, is this a hard or a soft brick, and do i have any options left? after researching on here i'm hoping JTAG isn't my only option (I don't have the time or funds to go that route) and i saw someone mention taking it back to at&t, butIi don't think that would help me any since rooting the phone voids the warranty, correct?
I'd be eternally grateful for ANY advice. i'm at my wits end, and i've been google researching this for so long i'm starting not to even comprehend what i'm reading. PLEASE HELP!! And thank you so much in advance.
Click to expand...
Click to collapse
If it is hard bricked when connected to computer it will show up in device manager as QDUSB Device or something similar. You could try to do a factory reset with button combo, be sure phone is powered off then hold power and volume down until menu shows up.
You Can Also Try TeenyBin If Factory Reset Does Not Work
Regards,
acervenky,
XPT
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
goplatinum said:
thanks for the reply guys. it looks like my phone is showing up in the device manager under ports as "LGE AndroidNet USB Serial Port (COM3)" is that a good sign? i'm going to try flashing teenybin again.
Click to expand...
Click to collapse
Yes, you are not dead in the water. Proceed, young grasshopper.
Sent from my Optimus G using xda app-developers app
All the custom, unofficial 4.2.2 roms I found on XDA require that you be on the latest LG 4.1.2 OTA.
There are also links to stock rom and kernel so you don't have to mess with LGPT whatever. No need to do OTA etc, if you flash this.
http://forum.xda-developers.com/showthread.php?t=2219953
I also found TWRP to be far easier to install, which is installed by default I think with FreeGee. But you can find thread for the latest TWRP 2.6. TWRP makes flashing and wiping cache/dalvik super easy.
Ok, so i'm starting to think this is a battery issue as opposed to a hardware issue. i could still be wrong. I've flashed the stcok rom after stock rom. When i plug my phone into a computer usb port it LG logo boot loops (and this is the only way i can get to download mode), but when i plug it into the usb wall charger, i just get the red flashing light and no other response. when it's not plugged in i get nothing.It's still showing up as "LGE AndroidNet USB Serial Port" in my device manager and i can still get to dpownload mode just fine, so i know all isn't "according to what i've read and been told". So i'm running out of fixes. I did come accross a thread on here suggesting i unplug the battery and plug it back up. So i'll be getting the tools and praying that works.
I did also come across an interesting thread on another forum. They were saying how id you allowed your battery to drain all the way to true zero (which i think might be possible because my phone died in recovery mode), it wouldn't have enough juice to initiate and monitor the charging process. If this is the case, can the batter be brought back to life? a jump start or something (lol)? or will i have to just replace the battery?
THANK YOU SO MUCH FOR THE HELP SO FAR GUYS.
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
adfurgerson said:
When you used lgnpst to go to 11c it boot looped because you tried to go backwards from cm. If you did a factory reset afterwards with button combo it should boot. Also can you get into recovery after flashing teenybin to do a reset and flash a ROM?
Click to expand...
Click to collapse
i did a factory reset a few times, but it still never booted. and whenever i LGNPST, when it hits 67% the phone reboots and just starts bootlooping (if i flash a stock rom) if i LGNPST teenybin, at 67% the phone will shut off and the flashing red light will just come up. and after each a message will say phone was unplugged or lost connection. after both instances ill plug it back up and put it in download mode again to finish and it will complete, but the phone will just be sitting there in download mode. and if i reboot.... bootloop city.
i cam across this thread that seems to detail my issue perfectly. so i'm going to attempt a teenybin flash one more time to tryt to get recovery mode (havent been able to get it at all), and if that doesn't work i'm going to do a battery pull..
http://forum.xda-developers.com/showthread.php?t=2261803&highlight=battery
BATTERY UNPLUG WORK LIKE A CHARM. again, i followed the method [r.]GimP laid out here http://forum.xda-developers.com/showthread.php?p=43732147#post43732147
i was nervous because i've never opened my (or any other) phone before.
and thanks to the tot link provided by zymphad above, i'm now running jb 4.1.2
THANK YOU GUYS :highfive:
I found LG's camera lacking, but 4.2 has an update for that, plus the camera mod, much improved I think.
Running RootBox great now with 124mhz idle, GPU downclocked to 200 and CPU undervolted to 85, stable and cool. I don't 3d game on phones.
Glad you fixed it, I just hope someone makes a high capacity internal battery for us since taking it apart isn't that difficult.
Sent from my Optimus G using Tapatalk 4 Beta

Categories

Resources