I dont really know what happened to the phone but for some reason, USB debugging and usb mass storage mounting has been disabled. It works fine in all other aspects except these two.
The first time it happened, it was fresh from a repair for not turning on anymore... That was easily fixed by LG within a day. The tech dude said something about "software upgrading".
The second time it happened, i was installing new apps straight to the SD and it wouldnt finish for like 10 minutes. So i turned it off and on again. Now everything found on my SD card wouldnt load and Settings would force close on me when I try to make it show all the apps on my phone.
I was wondering if this is a problem with apps2sd which I used... Maybe my memory card is too slow (class2) for the phone to install directly to it. Does anyone know what happened?
Hello
I used app2sd and my phone rebooted for no reason. Now after uninstalling it works fine. The unmount issue is common to P500. Probably it will be fixed on Gingerbread firmware.
So I'll have to hold off on customizing my phone until Gingerbread? =c
Guess I'll have to stick to phone memory for the apps not movable to the Sd on their own...
Also, I believe my problem goes beyond just the unmounting issue... I'll try to have the phone reformat the card when I get it back (soon I hope... I already sent it to LG)
It wouldnt show me that USB debugging and mass storage mounting is on even though those are checked on the Settings screen. When I connected the USB cable before with those settings on, there would be 2 icons on the notification bar that indicates that the two are working. I dont get those 2 icons now...
I'll try to have FroYo move the apps to SD after installing to phone memory when I get it back. Maybe that will solve the "taking forever to install" issue.
I hope the SD card reformatting by the phone would solve the slow SD card loading issue.
Which would leave the USB debugging and mass storage mounting issue... T__T
I don't really have the sudden SD card unmounting problem....
When I plug my Atrix into a device (computer, car, etc) via USB, the SD card auto-mounts. I would like to be able to adjust when it mounts but the auto-mount isn't a huge problem. My issue is that when I unplug the phone from a device the SD card doesn't automatically remount.
Is there a way to set up the SD card to automatically remount? Is there a manual way to remount besides restarting the phone?
thechump said:
When I plug my Atrix into a device (computer, car, etc) via USB, the SD card auto-mounts. I would like to be able to adjust when it mounts but the auto-mount isn't a huge problem. My issue is that when I unplug the phone from a device the SD card doesn't automatically remount.
Is there a way to set up the SD card to automatically remount? Is there a manual way to remount besides restarting the phone?
Click to expand...
Click to collapse
Did u try mounting in Settings --> SD card and storage
Yes, when I go to that menu it says, "Insert an SD card to mount". I'm not able to click "mount" because it is grayed out with the above message on it.
Any other ideas?
When u plug your phone in, there should be a USB icon @ the top of the screen. Pull that down, and select 'Do Nothing' that should clear up your problem. Always make sure you do this before unplugging your phone if it mounts the SDCard to avoid corrupting the data. Let me know if this fixed your problem.
I have the same exact issue. Selecting "None" for usb mode does nothing for me either. I have to reboot my phone just to get the SD Card and Internal storage to re-mount.
I don't know if this is related but I am also running ADEO ROM.
sstalder said:
I have the same exact issue. Selecting "None" for usb mode does nothing for me either. I have to reboot my phone just to get the SD Card and Internal storage to re-mount.
I don't know if this is related but I am also running ADEO ROM.
Click to expand...
Click to collapse
I'm rooted but running stock otherwise.
Selecting "none" just affects the phone's internal storage, not the SD card. Also, whenever i plug my phone into any device it automounts the SD, I'm never given an option. It is really frustrating when I just want to charge via USB and not mount my SD card.
Any other ideas? Is there an app that would solve this?
EDIT: I'm also having an issue where my PC won't let me "eject" the internal storage of the phone or the storage on the SD (drives F and G) so I have no choice but to just unplug it.
I should add that with my case my phone unmounts internal storage AND the sd card. It's to the point to where I am using adbWireless in order to push or run any other commands needed for adb.
sstalder said:
I should add that with my case my phone unmounts internal storage AND the sd card. It's to the point to where I am using adbWireless in order to push or run any other commands needed for adb.
Click to expand...
Click to collapse
Yeah you and I are having the exact same problems. This is really aggravating. However, I might have found a solution. In the app switchpro, you can set one of the controls (icons) to be "media remount". I have had soem limited success with it. Try it out yourself and let me know if it fixes the problem.
Thanks
I'm having the same problem. I downloaded the SwitchPro app and used the toggle mount/unmout successfully, so i don't have to restart the phone. It's a shame I had to buy an app to fix a problem with a new phone. I believe the first day of owning the phone I may have unplugged from the cpu while in media link mode for the usb connection, but since then I have it set to "none".
I am not rooted, nor am I running adeo rom as mentioned above.
Sam1geois said:
I'm having the same problem. I downloaded the SwitchPro app and used the toggle mount/unmout successfully, so i don't have to restart the phone. It's a shame I had to buy an app to fix a problem with a new phone. I believe the first day of owning the phone I may have unplugged from the cpu while in media link mode for the usb connection, but since then I have it set to "none".
I am not rooted, nor am I running adeo rom as mentioned above.
Click to expand...
Click to collapse
OK I'm glad we've found a fix of sorts at least.
That reload media widget works for my music player. Unfortunately, my widgets (dependent on teh SD card for skins) don't reload properly liek the rest of my media does. I'm still stuck powering on and powering off every time i unplug from a device.
SD Card problem
I think I have the opposite problem. I just rooted using aRoot. Now, when plugging the phone into my computer using a USB cable, the phone says the SD card is ready to be removed. And the Media Link can't read it either. Once I unplug the phone from the computer, the SD card is able to be used by the phone.
Any ideas?
jriverss said:
I think I have the opposite problem. I just rooted using aRoot. Now, when plugging the phone into my computer using a USB cable, the phone says the SD card is ready to be removed. And the Media Link can't read it either. Once I unplug the phone from the computer, the SD card is able to be used by the phone.
Any ideas?
Click to expand...
Click to collapse
My problems started after I used aRoot as well. Unfortunately, I never really found a solutions. I've just been restarting my phone whenever i plug it in. In your case, have you tried switching it into mass storage mode after plugging it in?
thechump said:
My problems started after I used aRoot as well. Unfortunately, I never really found a solutions. I've just been restarting my phone whenever i plug it in. In your case, have you tried switching it into mass storage mode after plugging it in?
Click to expand...
Click to collapse
I've tried every setting with no luck. All I wanted to do is add some music to my SD card. So I ended up taking the card out of the phone and inserting it directly into my computer in order to add the music. Not the best solution to the problem.
No definitely not. At least the files get transferred faster that way
Hey guys!
I'm having a problem with my SD Card here...
The SD was normal, my phone was normal too, but I decided to Unlock my Bootloader...
The bootloader is unlocked now, I installed a custom kernel "NaA" and I reflashed my room, just to make sure.
But, after all this, the SD Card problem begun...
Every time I connect my phone to the PC, the message "touch the button to connect bla bla bla" appears normaly, but when I touch the button to see the content of the SD Card on my PC, automaticaly appears the message on the StatusBar that I can safely remove my SD Card.
I cant formmat via PC, because he dont recognize my SD (Because of the "touch button" problem)...
What can I do?
Thanks!
Well, I've no idea what's causing that but you should be able to see what's on the SD card via your PC by using the memory stick adaptor that came in the box with your phone. Or try buying a memory card reader.
Or..when you connect your phone to the PC, don't select the option to view your files on the window that pops up, just select the bottom option instead ("Charge Phone" or something similar). Then use your pull-down menu and select the USB Storage option.
Normally, this lets you view the contents of your memory card on the PC. Because I don't know why you're having the issue you are, I don't know if this'll work or not but it's worth a try.
Hello.
I wanted to flash a new ROM on my SII. So i started Recovery and wanted to mount usb storage to copy the rom to sd.
I noticed that usb storage doesn't work, so i removed the battery and the sdcard and plugged in the card to my PC.
After copying the ROM on my sd card, i reinserted the sd card and wanted to start the SII, but nothing happens.
Download Mode, Recovery Mode, normal boot - nothing works. There is absolutely no reaction. The displays stays black.
Interesting: If i charge the SII, the SOC gets warmer.
Can somebody help me?
Phone: Unlocked (AT&T) rooted Galaxy S3 running Cyanogenmod 10
My phone will not recognize my 64gb external SD card. If I take it out and put it back in, it'll say "preparing SD" for about 5 seconds and then do nothing. If I try and mount it through the settings the mount sd option is greyed out. I've tried every combination of restarting and putting it back in possible.
I'm scared I might have fried it for good while messing around trying to get it to mount as a USB. Through some miraculous kludgy combination of apps and scripts, I managed to do it, but after I disconnected it from my computer the phone would not recognize it, and now my computer (a mac if that matters) won't either. The phone recognized it fine before all this.
Again, not sure exactly how I got it to mount as USB but it was some combination of these:
http://forum.xda-developers.com/showthread.php?t=1711009
http://forum.xda-developers.com/showpost.php?p=27282116&postcount=58
http://forum.xda-developers.com/showpost.php?p=28670285&postcount=1
At this point I don't even care if it'll mount as USB, I just want my SD card back. Total noob here, please have mercy.