First off I would like to thank Dropzeroc and Team 420 for an amazing Rom and for improving the experience of everyone using an Evo3D. I wanted to share with everyone else suffering from HBoot 1.5 that if you have been using Chads ICS Firmware fix because of constant bootloops you dont need to downgrade your HBoot to 1.4. I know every time i would flash the firmware fix it would break many bugs that had already been fixed, I had to flash it to avoid getting constant boot-loops. But Juopunutbear's Wire trick to get S-Off was a miracle fix, and after it turns S-Off it asks if you would like to install a custom Juopunutbear Hboot. After this is done you are officially on HBoot 1.5 S-Off! And can flash any ICSense ROMS successfully without having bootloops! I really hope this helps someone enjoy their ROMs that much MORE because i know it feels good TO FINALLY BE FREED FROM THE CURSE OF S-ON! THIS ROM IS THE FUNK!
And now i have everything Working!
-DMD Future MD
ROM: ZR3DX
HBoot: 1.5 (and proud) S-Off
BTW: This solved my boot-looping issues I am in no way representing Juopunutbear or any of his affiliates. I am only sharing with all of you a solution i found, allowing me to leave the bootlooping days behind me. And fully enjoy both The ICS ROMs and Kernels.
It worked for me 1.50 s-off now!
Fortunately for me, I haven't had the bootloops yet on 1.5 S-ON. Currently running MeanROM ICS 1.0. I may end up trying it anyways though, just so I don't have to worry about it.
Sent from my PG86100 using Tapatalk 2
Hey
I have another thread I made for the same fix but an easier method.
http://forum.xda-developers.com/showthread.php?p=26386620#post26386620
BTW, I am in no way trying to interfere with the OP.
Yeah but battery life sucks on that kernel!
cburk01 said:
I have another thread I made for the same fix but an easier method.
http://forum.xda-developers.com/showthread.php?p=26386620#post26386620
BTW, I am in no way trying to interfere with the OP.
Click to expand...
Click to collapse
Yea I was using that kernel for a while as well but aside from the notciable battery drain, you also have to deal with the incompatibility and so many working features from the ROM get broken in the process. But indeed this was all I could use to boot any ICSense ROM w/o going into boot-loops. But now I can flash Whatever Whenever
-DMD Future MD
ROM: ZR3DX
HBoot: 1.5 (and proud) S-Off
banzaiwolfe said:
Fortunately for me, I haven't had the bootloops yet on 1.5 S-ON. Currently running MeanROM ICS 1.0. I may end up trying it anyways though, just so I don't have to worry about it.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
That's great to hear you haven't had any issues. I'm noticing that HBoot 1.5 is kinda weird like that, with some ppl having issues while others don't. Although I was a little concerned with this "wire method" I can assure you it wasn't hard at all and was a rather smooth process. Longest part was flashing back to ZR3D 3.0 GT to be able to successfully mount and have proper communication between my evo3d and computer, which was a feature that would break once i would flash the firware fix by chad. All in all it was definitely worth it for me because Flash GUI, and Smart Flash, as well and using fastboot to flash kernels was getting REALLY OLD! Now I will never have those issues again!
BTW: I cant assure you will have the same results i did, the process was short and sweet for me. But can be very different for you, just follow the instructions carefully if your up for it, and I dont see how you could go wrong
-DMD Future MD
ROM: ZR3DX
HBoot: 1.5 (and proud) S-Off
Related
Ok please forgive I am a noob with half a brain lol. My ? is (is there a way to get ics roms working with out using chads kernel?) I do give credit tho he helped a lot out. I love the ics roms and went back and flashed gingerbread and it wasn't doing it for me lol but would like to get the ics rom working without having to flash it with a different kernel. I would like to see how these roms are with the kernels they come with. I have a htc evo 3d cdma 1.5 h-boot s on. If anyone would take the time to give a noob a hand in this matter or direct me in the right direction I would be very grateful. I have read the treads and just am not getting how to do a few things if pointed in the right direction I'm sure I can figure it out.
1. Downgrade to hboot 1.4 s-off (my recommendation).
2. Switch to 1.5 s-off.
3. Flash using 4ext which should flash the kernel properly.
The reason I recommend #1 is because 1.4 s-off people seem to have the least problems with bootloops.
Sent from my PG86100
evo3d6 said:
Ok please forgive I am a noob with half a brain lol. My ? is (is there a way to get ics roms working with out using chads kernel?) I do give credit tho he helped a lot out. I love the ics roms and went back and flashed gingerbread and it wasn't doing it for me lol but would like to get the ics rom working without having to flash it with a different kernel. I would like to see how these roms are with the kernels they come with. I have a htc evo 3d cdma 1.5 h-boot s on. If anyone would take the time to give a noob a hand in this matter or direct me in the right direction I would be very grateful. I have read the treads and just am not getting how to do a few things if pointed in the right direction I'm sure I can figure it out.
Click to expand...
Click to collapse
coal686 said:
1. Downgrade to hboot 1.4 s-off (my recommendation).
2. Switch to 1.5 s-off.
3. Flash using 4ext which should flash the kernel properly.
The reason I recommend #1 is because 1.4 s-off people seem to have the least problems with bootloops.
Sent from my PG86100
Click to expand...
Click to collapse
I agree with the downgrade to 1.4 S-Off. I'm not 100% sure about switching back to 1.5 (doesn't really matter as long as you're S-off anyway).
The main issue people were having was the firmware (adsp.img).
Chad had a test where he made the updated adsp.img file, and people were flashing it and reporting success on flashing ICS roms.
You can only flash if you're S-Off, and I'm assuming you're talking about the Sense 3.6 roms.
Check his androidfilehost for the file, I believe it's still there.
Hi all I am currently using a ics Rom with hboot 1.5 s on my goal is to be able to flash these roms with out using chads fix which helped me a lot thanks chad but it looks like the kernel won't be updated to fix breaks. So I have gone thru forums and have seen downgrading to 1.4 s off. My question is this if I downgrade will I loose the flash I have for metro pcs? And is it nessasary to downgrade to accomplish what I would like to achieve having ics without the breaks. Thank you all for the help.
sorry
Hi again sorry didn't say. I have a HTC EVO 3d cdma
Some roms have built in support for metro (like nocturnal ics), so you could downgrade and then flash one of those.
Or you could do a nandroid of your current setup and restore it after the downgrade process.
Sent from my PG86100 using Tapatalk 2
evo3d6 said:
Hi all I am currently using a ics Rom with hboot 1.5 s on my goal is to be able to flash these roms with out using chads fix which helped me a lot thanks chad but it looks like the kernel won't be updated to fix breaks. So I have gone thru forums and have seen downgrading to 1.4 s off. My question is this if I downgrade will I loose the flash I have for metro pcs? And is it nessasary to downgrade to accomplish what I would like to achieve having ics without the breaks. Thank you all for the help.
Click to expand...
Click to collapse
Before you attempt to downgrade, please write down all MetroPCS radio/PRI/PRL, etc info. Someone asked a similar question somewhere else about Boost. I believe he warned everyone that it will erase and you need all the info to restore his Boost (MOST LIKELY metroPCS) service.
You can also take a screen shot of the settings as well.
#Root-Hack_Mod*Always\
Thanks for the help
Ok Thank you all for your help but let me ask this there's this (wire trick) I hear there's a lot of success and I hear that some fail. If I did choose to use this method would it too remove flashed metro info? And does it have to be h-boot 1.4 s.off to flash the i.c.s roms or can I use 1.5 h-boot s.off? I'm still pretty new to this but starting to get the hang reading what a lot of great people are posting.
evo3d6 said:
Ok Thank you all for your help but let me ask this there's this (wire trick) I hear there's a lot of success and I hear that some fail. If I did choose to use this method would it too remove flashed metro info? And does it have to be h-boot 1.4 s.off to flash the i.c.s roms or can I use 1.5 h-boot s.off? I'm still pretty new to this but starting to get the hang reading what a lot of great people are posting.
Click to expand...
Click to collapse
From my reading, it seems either is ok. I still would suggest 1.4 s-off as that's what I have and it is solid for me. Roms flash with no trouble and I get no bootloops. But the 1.5 s-off method is easier so maybe someone with 1.5 s-off can report their success rate (ease of flashing roms, stability, etc).
Sent from my PG86100 using Tapatalk 2
evo3d6 said:
Ok Thank you all for your help but let me ask this there's this (wire trick) I hear there's a lot of success and I hear that some fail. If I did choose to use this method would it too remove flashed metro info? And does it have to be h-boot 1.4 s.off to flash the i.c.s roms or can I use 1.5 h-boot s.off? I'm still pretty new to this but starting to get the hang reading what a lot of great people are posting.
Click to expand...
Click to collapse
I think that's actually the thread where someone warned about his Boost info getting wiped, I could be wrong.
After s-off is achieved, hboot is sorta irrelevant. You can always flash a new hboot. I'm on eng hboot 1.04.
I upgraded my hboot from 1.4 to 1.58 and my Evo 3d reverted back to sprint, I had to pay again to flash it back to metropcs.
The same happened when I flashed a jelly bean rom. Tried 3 times different roms with no success. I've spent enough money already to buy a 4G LTE.
Sent from my PG86100 using Tapatalk 2
Long story short… I have been very busy for the last 6 months and not been keeping up with all the changes for the CDMA EVO 3D. I am not really sure the best way to get from here to there. I am not a noob and don’t really need my hand held or a dummy’s guide (I have been messing with Android since the HTC Hero and rooted lots of phones and pads). There has been just to many new ways to root and leaked roms…etc. It would be nice to skip all the BS and get caught up with what most people are currently doing.
My current config…
H-Boot: 1.40 s-off via Revolutionary Method
Recovery: TWRP v2.1.1
Rom: ViperRom Redline v2.5 RC2
Would it be better to just RUU back to stock Gingerbread then upgrade to ICS and re-root or is better way to get to ICS with root???? I am not trying save anything on my phone. I am a big fan of wiping and super wiping multiple times before loading a new rom. Also is there any benefit to H-Boot 1.5 or higher?
If this has already be asked can you point me to the correct thread.
Any help would be greatly appreciated.
Shark_HTC said:
Long story short… I have been very busy for the last 6 months and not been keeping up with all the changes for the CDMA EVO 3D. I am not really sure the best way to get from here to there. I am not a noob and don’t really need my hand held or a dummy’s guide (I have been messing with Android since the HTC Hero and rooted lots of phones and pads). There has been just to many new ways to root and leaked roms…etc. It would be nice to skip all the BS and get caught up with what most people are currently doing.
My current config…
H-Boot: 1.40 s-off via Revolutionary Method
Recovery: TWRP v2.1.1
Rom: ViperRom Redline v2.5 RC2
Would it be better to just RUU back to stock Gingerbread then upgrade to ICS and re-root or is better way to get to ICS with root???? I am not trying save anything on my phone. I am a big fan of wiping and super wiping multiple times before loading a new rom. Also is there any benefit to H-Boot 1.5 or higher?
If this has already be asked can you point me to the correct thread.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
If I'm reading right, just search the development forums for an ics rom, flash it and you're good to go. NEVER TAKE OTA
Sent from my EVO 3DMA with a little "Common Sense"
Tl;dr.
Just kidding. I'm running the latest ics rooted Roms on hboot 1.4 revolutionary s-off. I ran freeza's firmware update without the new hboot. This lets me run everything except the new kernel (which most new Roms don't use). If you insist on the new kernel, you can upgrade the hboot too, but you lose the ability to flash aosp and GB Roms.
So, in short, you just need to pick a rooted ics Rom and go. I like zr3dx, Meanrom, homebrew, or common ground.
I also recommend you change to 4ext recovery. It's really nice.
Read, Search, Read again, ... Then Ask with Tapatalk 2
coal686 said:
Tl;dr.
Just kidding. I'm running the latest ics rooted Roms on hboot 1.4 revolutionary s-off. I ran freeza's firmware update without the new hboot. This lets me run everything except the new kernel (which most new Roms don't use). If you insist on the new kernel, you can upgrade the hboot too, but you lose the ability to flash aosp and GB Roms.
So, in short, you just need to pick a rooted ics Rom and go. I like zr3dx, Meanrom, homebrew, or common ground.
I also recommend you change to 4ext recovery. It's really nice.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Click to expand...
Click to collapse
Thanks that was exactly what I needed and I was getting tired of reading all the posts about the VM fiasco, and sticking a wire in the SD card…etc.
You are right it was “Tl;dr” but I also hate threads that go on forever because you don’t have enough info to answer the question.
Thanks again
Shark_HTC said:
Thanks that was exactly what I needed and I was getting tired of reading all the posts about the VM fiasco, and sticking a wire in the SD card…etc.
You are right it was “Tl;dr” but I also hate threads that go on forever because you don’t have enough info to answer the question.
Thanks again
Click to expand...
Click to collapse
More information > less information :thumbup:
Read, Search, Read again, ... Then Ask with Tapatalk 2
after downgrading from ICS to GB, my free ram become low from free 380mb on ICS to 222 on GB
It appears that HBOOT 1.15 will not get s-off any time soon...Is it O.K. to upgrade to HBOOT 1.19 and wait then for s-off capabilities, or is 1.19 taboo also.
I am rooted, can I stall HBOOT 1.19 with abd, or would I have to root the phone again, and install a recovery...
There are 2 ways, ruu or revert to stock for ota. You must relock bootloader before ruu or ota. For the ota you need stock recovery as well. There's a few misconceptions floating around. First is that you need to update to run the latest base, this is simply not true, I'm running mikeys latest without issue. The second is basically the same but involving the aroma installer, flashes fine but sometimes kernel will not flash and you boot to bootloader. This does not mean you need to update only that the kernel did not like the new base, fastboot kernel and you'll be fine. Some people still have WiFi issues and others have LTE issues, both should have been addressed in the last 2 updates and people with the latest firmware are still having problems. To me this does not warrant relocking upgrading and going through the unlock again.
A lot of people including myself don't consider 1.19 an upgrade and like om said you don't nerf to update
Sent from my EVO using xda app-developers app
Always best waiting
In my experiences, it is almost ALWAYS best to wait. If for some reason 1.19 gets s-off before 1.15 then u can update. But for now, just wait. I got lucky and I'm 1.12 s-off either way warranty is gone so always get s-off whenever possible.
I keep seeing threads about s-off. I'll like people to be more specific as to what they're trying to achieve that they can't while being s-on?
Sent from my EVO using xda premium
Just the ability to directly flash software to partitions normally inaccessible, Firmware basically. Those of us s-on would have to flash back to stock, lock hboot, and accept an ota or relock and run the ruu
Also, don't know the details of any of it, but in the s-off bounty thread guy is donating a 1.15 hboot. U can flip a coin better than I can say what they will do with it then. Either update it to 1.19 or try and find the exploit on 1.15.
Personally, if I was a badass at finding exploits in HTC coding then I'd crack both like yesterday. But if I was that badass I'd have better stuff to do as well... Hoping for 1.19 s-off just for future development.
Anthonicia said:
Also, don't know the details of any of it, but in the s-off bounty thread guy is donating a 1.15 hboot. U can flip a coin better than I can say what they will do with it then. Either update it to 1.19 or try and find the exploit on 1.15.
Personally, if I was a badass at finding exploits in HTC coding then I'd crack both like yesterday. But if I was that badass I'd have better stuff to do as well... Hoping for 1.19 s-off just for future development.
Click to expand...
Click to collapse
there is a guy in the s-off thread saying he will give up his phone and i saw fuses sent him a PM reply about it hang in there guys
om4 said:
There are 2 ways, ruu or revert to stock for ota. You must relock bootloader before ruu or ota. For the ota you need stock recovery as well. There's a few misconceptions floating around. First is that you need to update to run the latest base, this is simply not true, I'm running mikeys latest without issue.
Click to expand...
Click to collapse
Quick question: Are you saying that if I wanted to run Mean ROM that I do not need to be in the latest OTA? I'm confused because I was under the understanding that we needed to be on 2.13. Please clarify for me.
Sent from my EVO LTE using xda app
No you don't, I ran meanrom a few days ago and today I switched to viper 2.02. Meanroms kernel installer worked fine, viper required fastboot but both run fine
Thanks for the quick response. Wow, I feel like a dumb *ss now. I've been holding out trying any new roms because I didn't want to come off of hboot 1.15.
Which rom do you like better so far between viper and mikey's?
Sent from my EVO LTE using xda app
The level of customization on viper is crazy, meanrom runs great with evilz kernel and is closer to stock. I'm still sifting through the different mods for viper and I've yet to check out any themes but so far but I'm still digging through it all
First and foremost, I sincerely apologize if there is some information out there that I have missed or failed to read. I am a noob to this forum as far as posting goes but I've been reading posts here for some time and thus far I have been unable to find a solution to my problem.
This is the third time that I'm flashing my EVO 3D, however it is the first time I've actually used S-OFF. This particular iteration of my phone was completely vanilla ICS on hboot 1.58. I followed the dummy-proof guide stickied to this forum all the way through getting S-OFF through the "wire trick" method. At this point I wound up with a "jbear" version of hboot 1.58. Sweet deal.
Problem is I decided I wanted to try CM v10.1 so I had to change hboot to something below 1.57... No biggie. Except for I messed with the thing for hours and had absolutely no luck getting it to boot. The only thing that worked was returning to the jbear 1.58 hboot and restoring an earlier backup from 4EXT with the stock ROM.
Long story short after multiple flashes, going from jbear 1.58 to jbear 1.50 and back several times I finally got the phone running on CM v10.1 "Wild for the Night" with hboot ENG 1.04.
So... my question is as follows. Have I hosed something up in my tinkering by going back and forth between hboots multiple times? I'm concerned that doing the v1.58 "wire trick" S-OFF and then jumping from one hboot to the other only to wind up with ENG 1.04 might cause issues in the future.
I apologize for any incoherence on the above. It is now 6am and I've been at this for hours...
kriz225 said:
First and foremost, I sincerely apologize if there is some information out there that I have missed or failed to read. I am a noob to this forum as far as posting goes but I've been reading posts here for some time and thus far I have been unable to find a solution to my problem.
This is the third time that I'm flashing my EVO 3D, however it is the first time I've actually used S-OFF. This particular iteration of my phone was completely vanilla ICS on hboot 1.58. I followed the dummy-proof guide stickied to this forum all the way through getting S-OFF through the "wire trick" method. At this point I wound up with a "jbear" version of hboot 1.58. Sweet deal.
Problem is I decided I wanted to try CM v10.1 so I had to change hboot to something below 1.57... No biggie. Except for I messed with the thing for hours and had absolutely no luck getting it to boot. The only thing that worked was returning to the jbear 1.58 hboot and restoring an earlier backup from 4EXT with the stock ROM.
Long story short after multiple flashes, going from jbear 1.58 to jbear 1.50 and back several times I finally got the phone running on CM v10.1 "Wild for the Night" with hboot ENG 1.04.
So... my question is as follows. Have I hosed something up in my tinkering by going back and forth between hboots multiple times? I'm concerned that doing the v1.58 "wire trick" S-OFF and then jumping from one hboot to the other only to wind up with ENG 1.04 might cause issues in the future.
I apologize for any incoherence on the above. It is now 6am and I've been at this for hours...
Click to expand...
Click to collapse
no, switching your hboots won't cause any issues with your phone. I will tell you however, always make sure you're on a compatible hboot for any ROM you flash
You can change hboots 10 times a day until you change your phone, nothing will break because of that. The problem is that some hboots are incompatible with some roms and some android versions. For most Jelly Bean you need the x hboot, while for Ice Scream Sandwitch you need the y hboot. You get the point l. Nothing breaks as long as you properly change hboots and don't get errors in the process of doing so.
Relax and flash away whatever you want
When flashing a new HBOOT you need to boot into recovery and wipe your cache partition then reboot again to recovery using the reboot to recovery option within recovery. Then flash ROM and GAPPS. Also make sure to be using the VERY latest 4ext recovery. The test version
私のEVO 4G LTEから送信される。
Thanks!
Thanks for the responses, that's reassuring.
dastin1015 said:
When flashing a new HBOOT you need to boot into recovery and wipe your cache partition then reboot again to recovery using the reboot to recovery option within recovery. Then flash ROM and GAPPS. Also make sure to be using the VERY latest 4ext recovery. The test version
私のEVO 4G LTEから送信される。
Click to expand...
Click to collapse
I saw these suggestions on your development thread and followed them. This is how I finally got it to work with the ENG 1.04 and so far the ROM is working great.
Not to take my own thread off topic but is there a list of supported kernels for this ROM? I'm interested in under clocking, etc. and not sure if that's possible on stock.
kriz225 said:
Thanks for the responses, that's reassuring.
I saw these suggestions on your development thread and followed them. This is how I finally got it to work with the ENG 1.04 and so far the ROM is working great.
Not to take my own thread off topic but is there a list of supported kernels for this ROM? I'm interested in under clocking, etc. and not sure if that's possible on stock.
Click to expand...
Click to collapse
Stock kernel has what you need.
私のEVO 4G LTEから送信される。
Thanks!
dastin1015 said:
Stock kernel has what you need.
私のEVO 4G LTEから送信される。
Click to expand...
Click to collapse
Thanks. I found the option, I apologize for the noobishness.
you're fine. i swapped a few hboots a few months ago so I could run CM10.1 roms. i think im on 1.50 with no problems
A sense stock kernel? Can I get the link to a underclocked kernel for cm10.1? Because I think this might solve my problem of 3g not toggling off.
Sent from my HTCEVOV4G using xda app-developers app
SkinnyBiggs said:
A sense stock kernel? Can I get the link to a underclocked kernel for cm10.1? Because I think this might solve my problem of 3g not toggling off.
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
Not sense. AOSP stock with max cpu 1128.
Sent from my Evo 3D CDMA using xda premium
SkinnyBiggs said:
A sense stock kernel? Can I get the link to a underclocked kernel for cm10.1? Because I think this might solve my problem of 3g not toggling off.
Sent from my HTCEVOV4G using xda app-developers app
Click to expand...
Click to collapse
Seems like we can no longer flash different kernels on cm10. What I suggest you do is try out dirty unicorns with dirty Mac kernel. Or kernel of your choice.
Sent from my Evo 3D CDMA
Astrikz said:
Seems like we can no longer flash different kernels on cm10. What I suggest you do is try out dirty unicorns with dirty Mac kernel. Or kernel of your choice.
Sent from my Evo 3D CDMA
Click to expand...
Click to collapse
If you want your favorite kernel to work on CM bug the developer and get them to update their code. There's no reason to be running legacy code when we're all about having the latest and greatest
私のEVO 4G LTEから送信される。
I went through about 5 versions of HBoot also before ending up on 104 eng... everything seems to be fine!