Hi, I have an Atrix 4g, great phone, by accident hit the screen with a corner an since then the touch start to fail in some spots, de screen was intact, I buy another digitizer on ebay and installed but the new one still have some touch dead spots, I need know if cant be other cause for the failure of the touchscreen in some areas, or maybe the new digitizer was installed wrong or come faulty. Really want fix this phone.
Related
Good Day folks, here is the long and short of it.
Galaxy s 2 fell and the screen broke
I bought a new screen
Replaced the screen BUT two big problems occured.
1. The screen appears to have less colours than my original screen
2. NONE OF THE SOFT KEYS WORK, HOME, MENU AND BACK DO NOT WORK.
Number 2. is the big problem. Does anyone have any idea how these buttons work?
Even when I press the buttons directly with my fingers with the buttons off they still do not work.
Im baffled. Please help.
I also have attached pictures of the button area
It happened to me, I removed the screen, I replaced from beginning and it worked...
Hi Collado, do the white things behind the buttons have any electronic functionality or are those just things to make it stick?
To all future readers. I found out what the problem was. Basically,
The home, back and menu keys are all connected to a single ribbon. It appears there is a tiny piece, connected via the back key. That was torn while i was ripping off the the screen and digitizer.
See the picture attached
How much did you pay for your replacement screen and where did you get it. My digitizer is broken due to a drop. My front glass is perfect but the digitizer is completey shot. How difficult was this project?
Hi Johnboy
I cant remember the price of the digitizer offhand but make a check on ebay.. that is where i got it.
Difficulty is high as you need the minature tool set to do this effectively and a gentle touch.
However, it still appears as though the screen I bought has less colours.
Sorry to jump in and unintended hijack
I also dropped my S2 and cracked the screen, and after checking around dropped it in to the Geek Squad at CPW. Who duly replaced the screen and digitizer for £80. Only problem is the screen seems less bright and if moved off the central viewing angle the screen dims, as if it wasa standard lcd and not the orginal AMOLED screen. Does anyone know if they make lesser screens or was it fitted badly.
Any advice greatly appreciated.
DM.
I would go back with it and complain.If you dont get satisfaction then do an impression of the guy that goes into the pizza shop in "rise of the foot-soldier" film.
Sent from my GT-I9100 using xda premium
I've cleaned the x10mp with wet wipes which contained a bit of alcohol, to remove fingerprints & grime.
Now, there is a rectangular region in the middle of the screen where touching produces nothing. There are no dead pixels, as far as I can see, just touching there isn't picked up by the phone.
Pressing anywhere else on the screen works fine.
Any suggestions?.
TIA
i think it cant be repaired if you really want to fix it you should by a new screen
sounds like hardware problem. Send it to service. maybe they can do something. or, they will tell u to change the touch screen...
gl
Hi, I'm new here and sorry to bother ya all, but I have a problem that I have discovered lately with my Prime. One section of the touch screen seemed to be unresponsive to touch, it's only about 1cm from the left bezel when viewed in landscape mode, for some reason it just won't respond to touch anymore, is this a software problem or something's wrong with the hardware? I'm very reluctant to send it for repairs because I needed it. Would appreciate any kind of help, my prime is running on Android 4.1.1, stock Asus software. Thanks
Probably hardware. Try a factory reset but I doubt it would work. ASUS will replace the screen for you under warranty. The screens are very bad quality. Mine has been replaced twice in RMA. Also a new motherboard, casing, 2x batteries, camera, wifi pcb's. Pretty much a new device.
Hello everyone,
this is my sad story and I would like you to help myself out of this pervading sadness....:crying:
I don't know how it happened, but the screen of my archos 101 g9 cracked: the touchscreen still works, the glass has no damage, but underneath the glass there is a wide crack from side to side, with a huge stain (lcd liquid?) coming out from the cracks.
what is to be replaced?
i found this one, is that what I need? http://www.ebay.it/itm/251174616903...X:IT&_trksid=p3984.m1423.l2649#ht_1598wt_1167
thank you very much
Giuseppe
I think you need a new screen. But mostly possible you will not be able to replace it if you're not skilled at repairing small things.
Touch screen digitizer is not what you need if your touchscreen works normally.
theadenter said:
I think you need a new screen. But mostly possible you will not be able to replace it if you're not skilled at repairing small things.
Touch screen digitizer is not what you need if your touchscreen works normally.
Click to expand...
Click to collapse
thanks, I know someone who can halp me.
where I can buy it online? I looked for it, but each time I find something I can't say if I'm going to buy a screen, touchscreen, digitizer or somethingelse... I can't identify what is what I'm looking at
Hi,
so I bought my G965F/DS a month ago and am very happy. Except for the miscalibrated touch screen.
Whenever I touch the screen, the recognized position is off by approx. 1/4th inch to the upper right. This causes serious typing problems etc.
I use a protective glass but checked with and without it - no difference. Touch sensitivity does not cause the issue either. I run magisk rooted stock room with exposed.
Is there any calibration tool for the display available?
Thanks!!
anyone?
Never seen a capacitive touchscreen needing recalibration, I'd take it back and get it replaced under warranty... Something is seriously wrong with the hardware.