Related
Hello I have a noon question, currently my galaxy tab is rooted with 3.1 the stock Rom, if I update will I loose the root and/or any of my apps? I just don't want to update all to loose apps or my root. If you do loose your root will the current method in the forums work to reroot? I have the American version if that matters.
Sent from my GT-P7510 using xda premium
You may still have your root but you will lose CWM.
And the current methods for root still works.
Thanks for the reply.
Sent from my GT-P7510 using xda premium
you will lose root and cwm. When the new 3.2 rom is flashed, it overwrites the files rooting it. Just did it on mine and had to re-root it again.
Galaxy 3.2 wifi update
ms0529 said:
you will lose root and cwm. When the new 3.2 rom is flashed, it overwrites the files rooting it. Just did it on mine and had to re-root it again.
Click to expand...
Click to collapse
I did the upgrade last night and lost my root. I tried to re-root using Super OneClick 2.2 but it hangs at step #5.
Can you tell us how you re-rooted after your upgrade please?
Thanks in advance!
amauer said:
I did the upgrade last night and lost my root. I tried to re-root using Super OneClick 2.2 but it hangs at step #5.
Can you tell us how you re-rooted after your upgrade please?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1239185
Hmm.. I'm rooted, with stock 3.1 but the update fails. Hmmm...
That worked perfectly. Thanks for the link!
Sent from my PC36100 using xda premium
No more file transfer without windows
Just a heads up. I've noticed on every single ROM for the 3.2.2 update (including re-stocking and unrooting 3.1, and upgrading using samsung's official update) no longer supports USB file transfer on Mac (Android File Transfer.app needed) or on Linux. As I'm forced to use a piece of sh*t Apple product at the office, I'm bummed.
RGardner said:
Hmm.. I'm rooted, with stock 3.1 but the update fails. Hmmm...
Click to expand...
Click to collapse
Me too - but updating with Kies worked. Then re-rooted and I'm done.
Jim
Updating to 3.2 works only with kies software and you loose root and clockworkmod.You have to reroot. Go to download mode , flash clockworkmod with odin, reboot and apply root.zip with new cwm.
My phone wont boot now.
It stays stuck at the 2nd Samsung during the boot up.
What happen was I updated today to offical ICS from my rooted gingerbread.
I updated via kias today to get official ICS, got it working and I noticed I didn't have cwm install anymore, so I followed this http://forum.xda-developers.com/showthread.php?t=1504218
It is pass it did it reboot thing, and never got past the 2nd "samsung" loading screen.
Anyone know how to get my phone booting again?
Flash the latest ICS kernel
I am not sure how to do that without cwm.
Before I updated to ICS when I press power + up down, it booted into CWM. Now when I do that I boots into Android System Recovery <3e>
EDIT: Good news.
Got CWM through installed though odin and then I restored to my gingerbread backup I made earlier.
Flash your roms via clockwork recovery mod from now on.
Drop the ROM .zip on sd card and then enter recovery. Wipe everything three times each then flash a uclf6 based ROM. Never touch Odin or kies again. Be happy. Ice cream sandwich is way better than ginger bread
Sent from my SAMSUNG-SGH-I717 using xda premium
Had the same exact problem. I "believe" the problem was that the CWM I flashed was perhaps incompatible with the official ICS?
I used Odin to flash cwm 5.5.0.4 as suggested and the fone was shut down with the hanging Samsung screen as you mentioned. I used the DL screen with Odin to the 600mb Team Objection ROM, which at least got me up and running again. I found out that CWM did in fact flash once the ROM was compatible with it. Updated CWM, then to finally get full stability, I had to do a factory reset after clearing both caches, then install the CM9 official.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Update: I installed official ICS again last night, looks like I lost my root and CWM.
I don't want to mess anything up again, so could you tell me exactly what CWM file you used to flash so it doesn't hang at samsung again?
I was having the same problems but I think I was doing it wrong. How are you flashing the root files? I upgraded from Kies, then used Odin to flash cwm touch (5.5.0.4 I think), make sure to let the reboot and that it's actually turned on and you can see your homescreen. Once you do that, THEN flash the superuser 3.0.7 in cwm. Let the phone reboot properly and it should be okay.
I was doing the same without the reboots and that's what caused me to hang at the logo, but after the above it worked well. Give it a try. For anyone who needs to flash the T-Mobile radios also let the phone reboot and then flash it because I was having issues with that which was fixed by letting the phone reboot.
Make nandroids at every step in case it does hang so you can just restore and try again instead of flashing everything all over again.
Sent from my SGH-I717R using xda app-developers app
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
dcdtrax said:
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Open odin , PDA cwm file, Droid in dl mode, plug in start unplug, reboot, go to cwm recovery mode and backup onto sd card.
Im learning more, as i soft bricked mine last time
dcdtrax said:
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Click to expand...
Click to collapse
Odin....to get touch cwm, then download the super user zip and flash it, you will have root....
All can be found in "My links" see it in red...go to GNote page....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
liftedzuki said:
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1740367
ok look for the green arrow...and use those threads....to root...k
odin for touch cwm
flash super user
your rooted
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Rooted.
erad1 said:
You realize you the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so correct...you nailed it...so many are trying to root with gb kernal....
I hope they go to the page I made and follow the green arrowed how to root ics...it is very super simple process to root the official ics...but ....
This happened to me after misreading a comment.
If you put your phone into download mode, plug it in, run kies, and do an emergency firmware recovery. You'll need the serial number. My phone is stock ICS again. Works fine.
erad1 said:
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
romeojunior said:
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Wait what??!!??!!
you need to read read read read and PLEASE read
Because CMW is not a kernel
Its a recovery
People wouldn't have these issues if they read.
Please refer to the stickies before you really damage your phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The OP had posted that he flashed Da_g's GB kernel trying to get root...your issue if flashing CWM may be different. Hopefully you use the steps outlined by bigjoe in his post.
Sent from my SAMSUNG-SGH-I717 using xda premium
hey guys,
i have a 1.43 nt16 rooted and running cm10 from internal. i forgot to run a backup prior to installing. i cannot find a 1.43 rooted, or stock rom anywhere. i found a 1.40, and a 1.42, however after these flash, it gets to the setup, but the touch screen is non responsive. therefore i cannot go any further. any advice? anyone have a stock, or stock rooted 1.43 i can download to get this puppy back to stock?
haloseven said:
hey guys,
i have a 1.43 nt16 rooted and running cm10 from internal. i forgot to run a backup prior to installing. i cannot find a 1.43 rooted, or stock rom anywhere. i found a 1.40, and a 1.42, however after these flash, it gets to the setup, but the touch screen is non responsive. therefore i cannot go any further. any advice? anyone have a stock, or stock rooted 1.43 i can download to get this puppy back to stock?
Click to expand...
Click to collapse
Could this work? http://forum.xda-developers.com/showthread.php?t=1663836
I just did the unbrick method and although it completed the unbrick successfully, when it rebooted, the touchscreen still doesnt work. im just going to chalk it up to a faulty refurb. im perplexed though, as CM10 works fine, if i put it back on there.
I would run cm10 from sdcard and flash back factory touch firmware
Sent from my Barnes & Noble Nook Tablet using my fingers to Swype
Did you try to hold power + N to reset your nook 8 time? It will go back to stock rom
Sent from my Barnes & Noble Nook Tablet using xda premium
BadKid3011 said:
Did you try to hold power + N to reset your nook 8 time? It will go back to stock rom
Sent from my Barnes & Noble Nook Tablet using xda premium
Click to expand...
Click to collapse
The ROM isn't the problem. The op needs to reflash the 2 touch firmware.
Sent from my CM 10 SD nook tablet. Thanks devs.
i just took it into a BN store and they swapped me for another refurb. thanks for the help though!
Followed the instructions on the main page of official CM 10.1 & ended up with a bootloop. Wiped caches and user data over & over with no change, so I'm about to downgrade back to 4.0.4 using RSD lite. I'm still determined to get to CM 10.1 on this device though but how do I do that now?
I saw "setting 2init" but I can't make any sense of what it means or how I can make use of it.
While trying to figure it out, I found the guide to upgrade to official JB but the JB OTA file it points to is for the xt912 (I'm using the xt910).
NOTE: I'm not going with the official JB, but it is the only other comprehensive guide I could find for upgrading from 4.0.4.
How do I get CM 10.1 on this phone now?
Terrarist said:
Followed the instructions on the main page of official CM 10.1 & ended up with a bootloop. Wiped caches and user data over & over with no change, so I'm about to downgrade back to 4.0.4 using RSD lite. I'm still determined to get to CM 10.1 on this device though but how do I do that now?
I saw "setting 2init" but I can't make any sense of what it means or how I can make use of it.
While trying to figure it out, I found the guide to upgrade to official JB but the JB OTA file it points to is for the xt912 (I'm using the xt910).
NOTE: I'm not going with the official JB, but it is the only other comprehensive guide I could find for upgrading from 4.0.4.
How do I get CM 10.1 on this phone now?
Click to expand...
Click to collapse
After flashing the CM10.1 and the 4.2 gapps, you also need to flash the the patch here: http://forum.xda-developers.com/attachment.php?attachmentid=1737046&d=1361096282 by whirleyes
it seems to have made things worse. before I had the "infinite cyanogen logo". now I keep getting screen off & the Motorola logo
Terrarist said:
it seems to have made things worse. before I had the "infinite cyanogen logo". now I keep getting screen off & the Motorola logo
Click to expand...
Click to collapse
its that mean you had bricked it?
No. thankfully I can still get to recovery & fastboot
Make sure you install it in second system, your razr will bricked if you install on the first system
And also, make sure you wipe cache/dalvik cache before flashing and factory reset(if you are going to install a other rom) . You need to format /system and wipe cache/dalvik if you are going to update cm10.1 to a new nightly .
Sent from my Transformer TF101 using xda app-developers app
TheMrcool212 said:
Make sure you install it in second system, your razr will bricked if you install on the first system
And also, make sure you wipe cache/dalvik cache before flashing and factory reset(if you are going to install a other rom) . You need to format /system and wipe cache/dalvik if you are going to update cm10.1 to a new nightly .
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Yea.... I never saw this and it's exactly what I've done. Downloading the original ICS roms from it's country of origin to see if I can restore right back to factory settings. I can still go into Recovery mode & I installed the rom to the 2nd slot but I'm not getting anything.
Terrarist said:
Yea.... I never saw this and it's exactly what I've done. Downloading the original ICS roms from it's country of origin to see if I can restore right back to factory settings. I can still go into Recovery mode & I installed the rom to the 2nd slot but I'm not getting anything.
Click to expand...
Click to collapse
Maybe because of the kernel?? Make sure you dowloaded the cm10.1 for gsm and not for CDMA and also not for the Jelly bean kernel. Can you boot to the first system, which is the stock ROM?
Sent from my XT910 using xda app-developers app
TheMrcool212 said:
Maybe because of the kernel?? Make sure you dowloaded the cm10.1 for gsm and not for CDMA and also not for the Jelly bean kernel. Can you boot to the first system, which is the stock ROM?
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Using this CM http://get.cm/?device=umts_spyder
1st system is gone cuz I wiped it. Now downloading 4 UAE roms from http://sbf.droid-developers.org/umts_spyder/list.php to see which is the original.
Terrarist said:
Using this CM http://get.cm/?device=umts_spyder
1st system is gone cuz I wiped it. Now downloading 4 UAE roms from http://sbf.droid-developers.org/umts_spyder/list.php to see which is the original.
Click to expand...
Click to collapse
You are now using the official cm10.1. and why does your first system is gone? its dangerous, dont leave it like that, make the stock rom as a backup if something happens at the other system
the reason its showing nothing when you booted your phone is becuase you have wiped you first system! so now i recommend you to factory reset in the stock revocery and flash the 672.180.14.XT910.Retail.en.EU firmware at this link : http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
so you can get the jelly bean leak without erasing your cid (not for the xt912). after that, you can install cm10.1 . The tutorial are here : http://forum.xda-developers.com/showthread.php?t=2192532
I literally just finished using RSD Lite to reflash a new ICS rom back onto stock slot. So I'm safe. I'll be working with slot 2 now.
So TheMrcool212 you're saying to use the tutorial to pave the way for CM 10.1? Does it matter that my device is from the UAE?
Terrarist said:
I literally just finished using RSD Lite to reflash a new ICS rom back onto stock slot. So I'm safe. I'll be working with slot 2 now.
So TheMrcool212 you're saying to use the tutorial to pave the way for CM 10.1? Does it matter that my device is from the UAE?
Click to expand...
Click to collapse
yes, because the recovery is installed on the first system, if your device is from UAE, its just doesnt matter, but i recommend you to flash the European firmware so you can get the jelly bean leak
I couldn't find the "set 2-init" option in BMM so I skipped it and CM 10.1 is working just fine (installed with bmm) :good:
dont forget to flash whirleys "why we have to...zip" file after flashing cm10.1
romdroid. said:
I couldn't find the "set 2-init" option in BMM so I skipped it and CM 10.1 is working just fine (installed with bmm) :good:
dont forget to flash whirleys "why we have to...zip" file after flashing cm10.1
Click to expand...
Click to collapse
you can set 2-init by going to first bootmenu screen > settings > (the system number of the rom you want to set) > boot mode >
Sv: [Q] Upgrading from xt910 404 stock to CM10.1
TheMrcool212 said:
you can set 2-init by going to first bootmenu screen > settings > (the system number of the rom you want to set) > boot mode >
Click to expand...
Click to collapse
Oh well ok cm is booting fine but thanks for the heads up :thumbup:
Sent from my XT910 using xda premium
TheMrcool212 said:
so you can get the jelly bean leak without erasing your cid (not for the xt912). after that, you can install cm10.1 . The tutorial are here : http://forum.xda-developers.com/showthread.php?t=2192532
Click to expand...
Click to collapse
Followed the instructions:
To apply the JB OTA you have to be on 672.180.41.XT910.Retail.en.EU without any Modifications, like deleted System Apps or changed Boot.img / Baseband.
I recommend to start with an fresh RSD Lite - Flash, before you try to apply the OTA.
Click to expand...
Click to collapse
Now phone won't boot. Thumping motorola logo for a bit, slight vibration, then off.
Terrarist said:
Followed the instructions:
Now phone won't boot. Thumping motorola logo for a bit, slight vibration, then off.
Click to expand...
Click to collapse
do you flash it on the stock recovery?? are you on the 672.180.41.XT910.retail.en.eu version?? are you rooted??
Sent from my Transformer TF101 using xda app-developers app
AW: [Q] Upgrading from xt910 404 stock to CM10.1
Wipe Data in Recovery.
Gesendet von meinem XT890 mit Tapatalk 2
I keep getting lucky with this thing. Apparently part of the problem was that the battery was flat. Odd seeing as I made sure to be 100% before I got started.
HSD-Pilot said:
Wipe Data in Recovery.
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Done and it's booted.
TheMrcool212 said:
do you flash it on the stock recovery?? are you on the 672.180.41.XT910.retail.en.eu version?? are you rooted??
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
I used RSD Lite. Yes I am. About to root & go on to the next steps:
Downloads
OTA Update Zip
Voodoo OTA Rootkeeper
How To
I'll show you how you have to apply the Update without loosing your Root.
1. Copy the Blur_Version.672.180.41.XT910.Retail.en.EU.zip into the Root of your external SD-Card
2. Update your SU-Binarys
3. Install the Voodoo OTA Rootkeeper on your Device and open it. Choose Protect Root and temp. unroot
4. Boot into Stock Recovery
5. Wipe Cache
6. Choose apply Update from external Storage and select the Blur_Version.672.180.41.XT910.Retail.en.EU.zip. Wait untill the Update-Process is finished and your RAZR is booted completely
7. The last step is to open the Voodoo Rootkeeper again and to restore your Root.
Click to expand...
Click to collapse
To be clear. After this, what do I do to get CM 10.1. Follow these instructions? http://forum.xda-developers.com/showthread.php?t=2028020 http://forum.xda-developers.com/showpost.php?p=39166589&postcount=914
UPDATE
Followed the instructions. Got nothing. Not even the cyanogenmod logo. At least now I have the stock rom running Blur_Version.672.180.41.XT910.Retail.en.EU.
And the all have the same green leaf for a home screen, so are my ROMS not being written to the right place or what. this is getting confusing. the ROM form about shows the different versions but all are skipping the setup and I have no 3G/LTE connection, only wifi.
Whatever I am doing I seem to be consistent about it
Did you flash gapps?
Sent from my GT-P7500 using XDA Premium HD app
eushaun99 said:
Did you flash gapps?
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
the AOPK had gapps folded in. what is odd is I have now tried AOPK and a CM10 and CM10.1 and they all seem to have the same start screen, come up after the boot like it is already installed, missing any 3G/4G connection. Now I have flashed back to EG01 and run up though iCS several times and it isn't taking the CWM now, says it installs ok but boots into stock recovery. Now I using the older CWM 5504 for the i-905 and it writes somewhere, but apparently not where it should be. I was going to try TWRP but that doens't appear to run on HC/ICS - is it JB only? I have shied away from the newer CWM for a long time because for a while they just seemed to boot-loop the tablet.
Any one have a suggested working version of CWM? This starting from scratch and rolling in all the updates is getting old - which is why I was wondering if there is a way to build my own ODIN set to just flash back to this point without having to go though reroot and install of the recovery (which apparently now I am not able to do - wts! )
Thanks!
Rob (lost) in Katy.
Twrp is compatible with ICS too, if im not mistaken. Go to www.droidbasement.com and download pershoots's version of cwm recovery. That should work just fine. BTW, you did make a full wipe (system, data, cache, dalvik) right? And what's EG01?
Sent from my GT-P7500 using XDA Premium HD app
eushaun99 said:
Twrp is compatible with ICS too, if im not mistaken. Go to www.droidbasement.com and download pershoots's version of cwm recovery. That should work just fine. BTW, you did make a full wipe (system, data, cache, dalvik) right? And what's EG01?
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
I am now one cycle 15 and doing the last update to 4.04. every stinking rom I load goes back to the factory or the ROM starts off and ignores the setup. The really annoying thing is I have had all this setup and working before. Ahhhhhh!
rgranger said:
I am now one cycle 15 and doing the last update to 4.04. every stinking rom I load goes back to the factory or the ROM starts off and ignores the setup. The really annoying thing is I have had all this setup and working before. Ahhhhhh!
Click to expand...
Click to collapse
Ok, i found another recovery laying around that seems to be working. I also found that the bug where you need to delete the script that deletes the new recovery. Once I got that far things started making sense. I guess whatever mod I was on before didn't need it. The next trick will be trynig to decifer how to do an odin backup so that I don't haver to roll though 4/5 upgrades to get here. I know someone is doing it. thanks for the help and a place to bounce ideas. will update if i come up with anything.
Rob